Pinouts for most components easily available through the web.

在网上大多数件针脚都能查得到。

Each component is carefully checked before assembly.

每个件在装配前都经仔细检查。

This refrigerator is fabricated from parts made in different factories.

这台电冰箱是由不同工厂所制件组装。

These parts are fully interchangeable with those in other machines.

这些件完全可以同其他机器件相互替换。

The accident has been assigned to a faulty part in the engine of the bus.

那次事故是因为汽车发动机中有一个有毛病件。

He was dismissed for stealing bicycle parts.

他因偷窃自行车件而被解雇了。

The bicycle is good in parts.

这自行车有些件是好。

The warranty covers all power-train components.

保修单包括了电动火车所有件。

Replacin oil quenching process with austemper process, bend intension of part and stability in using are advanced.

针对具体件,应等温淬火工艺代替油冷淬火工艺,提高了件屈服强度,使件在使中稳定性得到提高。

Mouser Electronics stocks suitable parts if you substitute a pair of 0.47uF caps for the 1uF electrolytics.

电影帽子实在有点大,但有空间,如果你把一些工作,为寻求微型件.

The process calculations such as layout chart of punching die for locatized plate, punching pressure, pressural center and etc.

分析了接线片结构特点和冲压工艺性,介绍了件排样设计方案、模具结构及主要特点。

The optimeter is widely used to precisely measure external size ofworkpiece by comparison with a gauge block or standard part.

本仪器是一种采量块或标准件与试件相比较方式测量物体外形尺寸仪器。

Then after thick, the essence two axle diameter localization drills the thread, the keyseat and the mill crank end surface.

机械加工工艺是规定产品或件机械加工工艺和操作方法，是指导生产重要技术性文件。

The conception model, assembly model and parts model of pneumatic hole impinger are established by the method of intelligent modeling.

采智能产品建模方法,建立了气动潜孔冲击器概念模型、装配模型和件模型。

Thus under the condition of without component as sembling diagram, solve the problem of assembling projectile weaving machine with knock-down parts.

从而解决了在没有件装配图情况下，装配散件片梭织机问题。

But in the couse of lathing and dawdling,the trouble of deformation,empyrosis and crack lf parts often appears which affects seriously the processing quality.

但在磨削中,易出现变形、烧伤及裂纹等问题,影响件加工质量。

According to the concept of context process problem space,. the concept of Directed Assembly Relationship Graph(DARG) was put forward. The isomorph of DARG was defined.

根据上下文工艺问题空间概念,提出了有向装配关系图概念,定义了有向装配关系图同构,以有向装配关系图和件通属性来构建实例库。

The technique character of the baffle of inspirator was introduced.A feasible process plan was determined and the integral piercing blanking bending forming die was designed.

介绍了呼吸器挡板件工艺特点,确定了合理工艺方案,设计1副落料、冲孔、压弯三道工序一次成形模具。

The goal of the mesh optimization algorithm is to re duce the number of the triangles in the mesh,and keep the accuracy of the interp olation at the same time.

反求工中曲面反求得到数据模型虽然可以正确反映件拓扑结构，但网格上三角形数量一般比较大。

Pinouts for most components easily available through the web.

在网上大多数件针脚都能得到。

Each component is carefully checked before assembly.

每个件在装配前都经过仔细检。

This refrigerator is fabricated from parts made in different factories.

电冰箱是由不同工厂所制件组装。

These parts are fully interchangeable with those in other machines.

些件完全可以同其他机器件相互替换。

The accident has been assigned to a faulty part in the engine of the bus.

那次事故是因为汽车发动机中有一个有毛病件。

He was dismissed for stealing bicycle parts.

他因偷窃自行车件而被解雇了。

The bicycle is good in parts.

自行车有些件是好。

The warranty covers all power-train components.

保修单包括了电动火车所有件。

Replacin oil quenching process with austemper process, bend intension of part and stability in using are advanced.

针对具体件,应用等温淬火工艺代替油冷淬火工艺,提高了件屈服强度,使件在使用过程中稳定性得到提高。

Mouser Electronics stocks suitable parts if you substitute a pair of 0.47uF caps for the 1uF electrolytics.

电影帽子实在有点大,但有空间,如果你把一些工作,为寻求微型件.

The process calculations such as layout chart of punching die for locatized plate, punching pressure, pressural center and etc.

分析了接线片结构特点和冲压工艺性,介绍了件排样设计方案、模具结构及主要特点。

The optimeter is widely used to precisely measure external size ofworkpiece by comparison with a gauge block or standard part.

本仪器是一种采用量块或标准件与试件相比较方式测量物体外形尺寸仪器。

Then after thick, the essence two axle diameter localization drills the thread, the keyseat and the mill crank end surface.

机械加工工艺是规定产品或件机械加工工艺过程和操作方法，是指导生产重要技术性文件。

The conception model, assembly model and parts model of pneumatic hole impinger are established by the method of intelligent modeling.

采用智能产品建模方法,建立了气动潜孔冲击器概念模型、装配模型和件模型。

Thus under the condition of without component as sembling diagram, solve the problem of assembling projectile weaving machine with knock-down parts.

从而解决了在没有件装配图情况下，装配散件片梭织机问题。

But in the couse of lathing and dawdling,the trouble of deformation,empyrosis and crack lf parts often appears which affects seriously the processing quality.

但在磨削过程中,易出现变形、烧伤及裂纹等问题,影响件加工质量。

According to the concept of context process problem space,. the concept of Directed Assembly Relationship Graph(DARG) was put forward. The isomorph of DARG was defined.

根据上下文工艺问题空间概念,提出了有向装配关系图概念,定义了有向装配关系图同构,以有向装配关系图和件通用属性来构建实例库。

The technique character of the baffle of inspirator was introduced.A feasible process plan was determined and the integral piercing blanking bending forming die was designed.

介绍了呼吸器挡板件工艺特点,确定了合理工艺方案,设计1副落料、冲孔、压弯三道工序一次成形模具。

The goal of the mesh optimization algorithm is to re duce the number of the triangles in the mesh,and keep the accuracy of the interp olation at the same time.

反求工程中曲面反求得到数据模型虽然可以正确反映件拓扑结构，但网格上三角形数量一般比较大。

Pinouts for most components easily available through the web.

在网上大多数件针脚都能查得到。

Each component is carefully checked before assembly.

每个件在装配前都经过仔细检查。

This refrigerator is fabricated from parts made in different factories.

这台电冰箱是由不同工厂所制件组装。

These parts are fully interchangeable with those in other machines.

这些件完全可以同其他机器件相互替换。

The accident has been assigned to a faulty part in the engine of the bus.

那次事故是因为汽车发动机中有一个有毛病件。

He was dismissed for stealing bicycle parts.

他因偷窃自行车件被解雇了。

The bicycle is good in parts.

这自行车有些件是好。

The warranty covers all power-train components.

保修单包括了电动火车所有件。

Replacin oil quenching process with austemper process, bend intension of part and stability in using are advanced.

针对具体件,应用等温淬火工艺代替油冷淬火工艺,提高了件强度,使件在使用过程中稳定性得到提高。

Mouser Electronics stocks suitable parts if you substitute a pair of 0.47uF caps for the 1uF electrolytics.

电影帽子实在有点大,但有空间,如果你把一些工作,为寻求微型件.

The process calculations such as layout chart of punching die for locatized plate, punching pressure, pressural center and etc.

分析了接线片结构特点和冲压工艺性,介绍了件排样设计方案、模具结构及主要特点。

The optimeter is widely used to precisely measure external size ofworkpiece by comparison with a gauge block or standard part.

本仪器是一种采用量块或标准件与试件相比较方式测量物体外形尺寸仪器。

Then after thick, the essence two axle diameter localization drills the thread, the keyseat and the mill crank end surface.

机械加工工艺是规定产品或件机械加工工艺过程和操作方法，是指导生产重要技术性文件。

The conception model, assembly model and parts model of pneumatic hole impinger are established by the method of intelligent modeling.

采用智能产品建模方法,建立了气动潜孔冲击器概念模型、装配模型和件模型。

Thus under the condition of without component as sembling diagram, solve the problem of assembling projectile weaving machine with knock-down parts.

从解决了在没有件装配图情况下，装配散件片梭织机问题。

But in the couse of lathing and dawdling,the trouble of deformation,empyrosis and crack lf parts often appears which affects seriously the processing quality.

但在磨削过程中,易出现变形、烧伤及裂纹等问题,影响件加工质量。

According to the concept of context process problem space,. the concept of Directed Assembly Relationship Graph(DARG) was put forward. The isomorph of DARG was defined.

根据上下文工艺问题空间概念,提出了有向装配关系图概念,定义了有向装配关系图同构,以有向装配关系图和件通用属性来构建实例库。

The technique character of the baffle of inspirator was introduced.A feasible process plan was determined and the integral piercing blanking bending forming die was designed.

介绍了呼吸器挡板件工艺特点,确定了合理工艺方案,设计1副落料、冲孔、压弯三道工序一次成形模具。

The goal of the mesh optimization algorithm is to re duce the number of the triangles in the mesh,and keep the accuracy of the interp olation at the same time.

反求工程中曲面反求得到数据模型虽然可以正确反映件拓扑结构，但网格上三角形数量一般比较大。

Pinouts for most components easily available through the web.

在网上大多数件的针脚都能查得到。

Each component is carefully checked before assembly.

每个件在装配前都经过仔细检查。

This refrigerator is fabricated from parts made in different factories.

这台电冰箱是由不同的工厂所制的件组装的。

These parts are fully interchangeable with those in other machines.

这些件完全可以同其他机器的件相互替换。

The accident has been assigned to a faulty part in the engine of the bus.

那次事故是因为汽车发动机中有一个有毛病的件。

He was dismissed for stealing bicycle parts.

他因偷窃自行车件而被解雇。

The bicycle is good in parts.

这自行车有些件是好的。

The warranty covers all power-train components.

保修单电动火车的所有件。

Replacin oil quenching process with austemper process, bend intension of part and stability in using are advanced.

针对具体件,温淬火工艺代替油冷淬火工艺,提高件的屈服强度,使件在使过程中的稳定性得到提高。

Mouser Electronics stocks suitable parts if you substitute a pair of 0.47uF caps for the 1uF electrolytics.

电影帽子实在有点大,但有空间,如果你把一些工作,为寻求微型件.

The process calculations such as layout chart of punching die for locatized plate, punching pressure, pressural center and etc.

分析接线片的结构特点和冲压工艺性,介绍件的排样设计方案、模具结构及主要特点。

The optimeter is widely used to precisely measure external size ofworkpiece by comparison with a gauge block or standard part.

本仪器是一种采量块或标准件与试件相比较的方式测量物体外形尺寸的仪器。

Then after thick, the essence two axle diameter localization drills the thread, the keyseat and the mill crank end surface.

机械加工工艺是规定产品或件机械加工工艺过程和操作方法，是指导生产的重要的技术性文件。

The conception model, assembly model and parts model of pneumatic hole impinger are established by the method of intelligent modeling.

采智能产品建模的方法,建立气动潜孔冲击器的概念模型、装配模型和件模型。

Thus under the condition of without component as sembling diagram, solve the problem of assembling projectile weaving machine with knock-down parts.

从而解决在没有件装配图的情况下，装配散件片梭织机的问题。

But in the couse of lathing and dawdling,the trouble of deformation,empyrosis and crack lf parts often appears which affects seriously the processing quality.

但在磨削过程中,易出现变形、烧伤及裂纹问题,影响件的加工质量。

According to the concept of context process problem space,. the concept of Directed Assembly Relationship Graph(DARG) was put forward. The isomorph of DARG was defined.

根据上下文工艺问题空间的概念,提出有向装配关系图的概念,定义有向装配关系图同构,以有向装配关系图和件通属性来构建实例库。

The technique character of the baffle of inspirator was introduced.A feasible process plan was determined and the integral piercing blanking bending forming die was designed.

介绍呼吸器挡板件工艺特点,确定合理的工艺方案,设计1副落料、冲孔、压弯三道工序一次成形的模具。

The goal of the mesh optimization algorithm is to re duce the number of the triangles in the mesh,and keep the accuracy of the interp olation at the same time.

反求工程中曲面反求得到的数据模型虽然可以正确反映件的拓扑结构，但网格上的三角形的数量一般比较大。

Pinouts for most components easily available through the web.

在网上大多数件针脚都能查得到。

Each component is carefully checked before assembly.

每个件在装配前都经过仔细检查。

This refrigerator is fabricated from parts made in different factories.

这台电冰箱是由不同工厂所制件组装。

These parts are fully interchangeable with those in other machines.

这些件完全可以同其他机器件相互替换。

The accident has been assigned to a faulty part in the engine of the bus.

那次事故是因为汽车发动机有一个有件。

He was dismissed for stealing bicycle parts.

他因偷窃自行车件而被解雇了。

The bicycle is good in parts.

这自行车有些件是好。

The warranty covers all power-train components.

保修单包括了电动火车所有件。

Replacin oil quenching process with austemper process, bend intension of part and stability in using are advanced.

针对具体件,应用等温淬火工艺代替油冷淬火工艺,提高了件屈服强度,使件在使用过程定性得到提高。

Mouser Electronics stocks suitable parts if you substitute a pair of 0.47uF caps for the 1uF electrolytics.

电影帽子实在有点大,但有空间,如果你把一些工作,为寻求微型件.

The process calculations such as layout chart of punching die for locatized plate, punching pressure, pressural center and etc.

分析了接线片结构特点和冲压工艺性,介绍了件排样设计方案、模具结构及主要特点。

The optimeter is widely used to precisely measure external size ofworkpiece by comparison with a gauge block or standard part.

本仪器是一种采用量块或标准件与试件相比较方式测量物体外形尺寸仪器。

Then after thick, the essence two axle diameter localization drills the thread, the keyseat and the mill crank end surface.

机械加工工艺是规定产品或件机械加工工艺过程和操作方法，是指导生产重要技术性文件。

The conception model, assembly model and parts model of pneumatic hole impinger are established by the method of intelligent modeling.

采用智能产品建模方法,建立了气动潜孔冲击器概念模型、装配模型和件模型。

Thus under the condition of without component as sembling diagram, solve the problem of assembling projectile weaving machine with knock-down parts.

从而解决了在没有件装配图情况下，装配散件片梭织机问题。

But in the couse of lathing and dawdling,the trouble of deformation,empyrosis and crack lf parts often appears which affects seriously the processing quality.

但在磨削过程,易出现变形、烧伤及裂纹等问题,影响件加工质量。

According to the concept of context process problem space,. the concept of Directed Assembly Relationship Graph(DARG) was put forward. The isomorph of DARG was defined.

根据上下文工艺问题空间概念,提出了有向装配关系图概念,定义了有向装配关系图同构,以有向装配关系图和件通用属性来构建实例库。

The technique character of the baffle of inspirator was introduced.A feasible process plan was determined and the integral piercing blanking bending forming die was designed.

介绍了呼吸器挡板件工艺特点,确定了合理工艺方案,设计1副落料、冲孔、压弯三道工序一次成形模具。

The goal of the mesh optimization algorithm is to re duce the number of the triangles in the mesh,and keep the accuracy of the interp olation at the same time.

反求工程曲面反求得到数据模型虽然可以正确反映件拓扑结构，但网格上三角形数量一般比较大。

Pinouts for most components easily available through the web.

在网上大多数件的针脚都能查得到。

Each component is carefully checked before assembly.

每个件在装配前都经过仔细检查。

This refrigerator is fabricated from parts made in different factories.

这台电冰箱是由不同的工厂所制的件组装的。

These parts are fully interchangeable with those in other machines.

这些件完全可以同其他机器的件相互替换。

The accident has been assigned to a faulty part in the engine of the bus.

那次事故是因为汽车发动机中有一个有毛病的件。

He was dismissed for stealing bicycle parts.

他因偷窃自行车件而。

The bicycle is good in parts.

这自行车有些件是好的。

The warranty covers all power-train components.

保修单包括电动火车的所有件。

Replacin oil quenching process with austemper process, bend intension of part and stability in using are advanced.

针对具体件,应用等温淬火工艺代替油冷淬火工艺,提高件的屈服强度,使件在使用过程中的稳定性得到提高。

Mouser Electronics stocks suitable parts if you substitute a pair of 0.47uF caps for the 1uF electrolytics.

电影帽子实在有点大,但有空间,如果你把一些工作,为寻求微型件.

The process calculations such as layout chart of punching die for locatized plate, punching pressure, pressural center and etc.

分析接线片的结构特点和冲压工艺性,介绍件的排样设计方案、模具结构及主要特点。

The optimeter is widely used to precisely measure external size ofworkpiece by comparison with a gauge block or standard part.

本仪器是一种采用量块或标准件与试件相比较的方式测量物体外形尺寸的仪器。

Then after thick, the essence two axle diameter localization drills the thread, the keyseat and the mill crank end surface.

机械加工工艺是规定产品或件机械加工工艺过程和操作方法，是指导生产的重要的技术性文件。

The conception model, assembly model and parts model of pneumatic hole impinger are established by the method of intelligent modeling.

采用智能产品建模的方法,建立气动潜孔冲击器的概念模型、装配模型和件模型。

Thus under the condition of without component as sembling diagram, solve the problem of assembling projectile weaving machine with knock-down parts.

从而决在没有件装配图的情况下，装配散件片梭织机的问题。

But in the couse of lathing and dawdling,the trouble of deformation,empyrosis and crack lf parts often appears which affects seriously the processing quality.

但在磨削过程中,易出现变形、烧伤及裂纹等问题,影响件的加工质量。

According to the concept of context process problem space,. the concept of Directed Assembly Relationship Graph(DARG) was put forward. The isomorph of DARG was defined.

根据上下文工艺问题空间的概念,提出有向装配关系图的概念,定义有向装配关系图同构,以有向装配关系图和件通用属性来构建实例库。

The technique character of the baffle of inspirator was introduced.A feasible process plan was determined and the integral piercing blanking bending forming die was designed.

介绍呼吸器挡板件工艺特点,确定合理的工艺方案,设计1副落料、冲孔、压弯三道工序一次成形的模具。

The goal of the mesh optimization algorithm is to re duce the number of the triangles in the mesh,and keep the accuracy of the interp olation at the same time.

反求工程中曲面反求得到的数据模型虽然可以正确反映件的拓扑结构，但网格上的三角形的数量一般比较大。

Pinouts for most components easily available through the web.

在网上大多数件的针脚都能查得到。

Each component is carefully checked before assembly.

每个件在装配前都经过仔细检查。

This refrigerator is fabricated from parts made in different factories.

这台电由不同的工厂所制的件组装的。

These parts are fully interchangeable with those in other machines.

这些件完全可以同其他机器的件相互替换。

The accident has been assigned to a faulty part in the engine of the bus.

那次事故因为汽车发动机中有一个有毛病的件。

He was dismissed for stealing bicycle parts.

他因偷窃自行车件而被解雇了。

The bicycle is good in parts.

这自行车有些件好的。

The warranty covers all power-train components.

保修单包括了电动火车的所有件。

Replacin oil quenching process with austemper process, bend intension of part and stability in using are advanced.

针对具体件,应用等温淬火工艺代替油冷淬火工艺,提高了件的屈服强度,使件在使用过程中的稳定得到提高。

Mouser Electronics stocks suitable parts if you substitute a pair of 0.47uF caps for the 1uF electrolytics.

电影帽子实在有点大,但有空间,如果你把一些工作,为寻求微型件.

The process calculations such as layout chart of punching die for locatized plate, punching pressure, pressural center and etc.

分析了接线片的结构特点和冲压工艺,了件的排样设计方案、模具结构及主要特点。

The optimeter is widely used to precisely measure external size ofworkpiece by comparison with a gauge block or standard part.

本仪器一种采用量块或标准件与试件相比较的方式测量物体外形尺寸的仪器。

Then after thick, the essence two axle diameter localization drills the thread, the keyseat and the mill crank end surface.

机械加工工艺规定产品或件机械加工工艺过程和操作方法，指导生产的重要的技术文件。

The conception model, assembly model and parts model of pneumatic hole impinger are established by the method of intelligent modeling.

采用智能产品建模的方法,建立了气动潜孔冲击器的概念模型、装配模型和件模型。

Thus under the condition of without component as sembling diagram, solve the problem of assembling projectile weaving machine with knock-down parts.

从而解决了在没有件装配图的情况下，装配散件片梭织机的问题。

But in the couse of lathing and dawdling,the trouble of deformation,empyrosis and crack lf parts often appears which affects seriously the processing quality.

但在磨削过程中,易出现变形、烧伤及裂纹等问题,影响件的加工质量。

According to the concept of context process problem space,. the concept of Directed Assembly Relationship Graph(DARG) was put forward. The isomorph of DARG was defined.

根据上下文工艺问题空间的概念,提出了有向装配关系图的概念,定义了有向装配关系图同构,以有向装配关系图和件通用属来构建实例库。

The technique character of the baffle of inspirator was introduced.A feasible process plan was determined and the integral piercing blanking bending forming die was designed.

了呼吸器挡板件工艺特点,确定了合理的工艺方案,设计1副落料、冲孔、压弯三道工序一次成形的模具。

The goal of the mesh optimization algorithm is to re duce the number of the triangles in the mesh,and keep the accuracy of the interp olation at the same time.

反求工程中曲面反求得到的数据模型虽然可以正确反映件的拓扑结构，但网格上的三角形的数量一般比较大。

Pinouts for most components easily available through the web.

在网上大多数件针脚都能查得到。

Each component is carefully checked before assembly.

每个件在装配前都经过仔细检查。

This refrigerator is fabricated from parts made in different factories.

这台电冰箱是由不同工厂所制件组装。

These parts are fully interchangeable with those in other machines.

这些件完全可以同其他机器件相互替换。

The accident has been assigned to a faulty part in the engine of the bus.

那次事故是因为汽车发动机中有一个有毛病件。

He was dismissed for stealing bicycle parts.

他因偷窃自行车件被解雇了。

The bicycle is good in parts.

这自行车有些件是好。

The warranty covers all power-train components.

保修单包括了电动火车所有件。

Replacin oil quenching process with austemper process, bend intension of part and stability in using are advanced.

针对具体件,应用等温淬火工艺代替油冷淬火工艺,提高了件强度,使件在使用过程中稳定性得到提高。

Mouser Electronics stocks suitable parts if you substitute a pair of 0.47uF caps for the 1uF electrolytics.

电影帽子实在有点大,但有空间,如果你把一些工作,为寻求微型件.

The process calculations such as layout chart of punching die for locatized plate, punching pressure, pressural center and etc.

分析了接线片结构特点和冲压工艺性,介绍了件排样设计方案、模具结构及主要特点。

The optimeter is widely used to precisely measure external size ofworkpiece by comparison with a gauge block or standard part.

本仪器是一种采用量块或标准件与试件相比较方式测量物体外形尺寸仪器。

Then after thick, the essence two axle diameter localization drills the thread, the keyseat and the mill crank end surface.

机械加工工艺是规定产品或件机械加工工艺过程和操作方法，是指导生产重要技术性文件。

The conception model, assembly model and parts model of pneumatic hole impinger are established by the method of intelligent modeling.

采用智能产品建模方法,建立了气动潜孔冲击器概念模型、装配模型和件模型。

Thus under the condition of without component as sembling diagram, solve the problem of assembling projectile weaving machine with knock-down parts.

从解决了在没有件装配图情况下，装配散件片梭织机问题。

But in the couse of lathing and dawdling,the trouble of deformation,empyrosis and crack lf parts often appears which affects seriously the processing quality.

但在磨削过程中,易出现变形、烧伤及裂纹等问题,影响件加工质量。

According to the concept of context process problem space,. the concept of Directed Assembly Relationship Graph(DARG) was put forward. The isomorph of DARG was defined.

根据上下文工艺问题空间概念,提出了有向装配关系图概念,定义了有向装配关系图同构,以有向装配关系图和件通用属性来构建实例库。

The technique character of the baffle of inspirator was introduced.A feasible process plan was determined and the integral piercing blanking bending forming die was designed.

介绍了呼吸器挡板件工艺特点,确定了合理工艺方案,设计1副落料、冲孔、压弯三道工序一次成形模具。

The goal of the mesh optimization algorithm is to re duce the number of the triangles in the mesh,and keep the accuracy of the interp olation at the same time.

反求工程中曲面反求得到数据模型虽然可以正确反映件拓扑结构，但网格上三角形数量一般比较大。

Pinouts for most components easily available through the web.

在网上大多数件的针脚都能查得到。

Each component is carefully checked before assembly.

每个件在装配前都经过仔细检查。

This refrigerator is fabricated from parts made in different factories.

这台电冰箱是由不同的工厂所制的件组装的。

These parts are fully interchangeable with those in other machines.

这些件完全可以同其他机器的件相互替换。

The accident has been assigned to a faulty part in the engine of the bus.

那次事故是因为汽车发动机中有一个有毛病的件。

He was dismissed for stealing bicycle parts.

他因偷窃自行车件而被解雇了。

The bicycle is good in parts.

这自行车有些件是好的。

The warranty covers all power-train components.

保修单包括了电动火车的所有件。

Replacin oil quenching process with austemper process, bend intension of part and stability in using are advanced.

针对具体件,应用等温淬火工艺代替油冷淬火工艺,提高了件的屈服强度,使件在使用过程中的稳定性得到提高。

Mouser Electronics stocks suitable parts if you substitute a pair of 0.47uF caps for the 1uF electrolytics.

电影帽子实在有点大,但有空间,如果你把一些工作,为寻求微型件.

The process calculations such as layout chart of punching die for locatized plate, punching pressure, pressural center and etc.

分析了接线片的结构特点和冲压工艺性,介绍了件的排样设计方案、模具结构及主要特点。

The optimeter is widely used to precisely measure external size ofworkpiece by comparison with a gauge block or standard part.

本仪器是一种采用量块或标准件件相比较的方式测量物体外形尺寸的仪器。

Then after thick, the essence two axle diameter localization drills the thread, the keyseat and the mill crank end surface.

机械加工工艺是规定产品或件机械加工工艺过程和操作方法，是指导生产的重要的技术性文件。

The conception model, assembly model and parts model of pneumatic hole impinger are established by the method of intelligent modeling.

采用智能产品建模的方法,建立了气动潜孔冲击器的概念模型、装配模型和件模型。

Thus under the condition of without component as sembling diagram, solve the problem of assembling projectile weaving machine with knock-down parts.

从而解决了在没有件装配图的情况下，装配散件片梭织机的问题。

But in the couse of lathing and dawdling,the trouble of deformation,empyrosis and crack lf parts often appears which affects seriously the processing quality.

但在磨削过程中,易出现变形、烧伤及裂纹等问题,影响件的加工质量。

According to the concept of context process problem space,. the concept of Directed Assembly Relationship Graph(DARG) was put forward. The isomorph of DARG was defined.

根据上下文工艺问题空间的概念,提出了有向装配关系图的概念,定义了有向装配关系图同构,以有向装配关系图和件通用属性来构建实。

The technique character of the baffle of inspirator was introduced.A feasible process plan was determined and the integral piercing blanking bending forming die was designed.

介绍了呼吸器挡板件工艺特点,确定了合理的工艺方案,设计1副落料、冲孔、压弯三道工序一次成形的模具。

The goal of the mesh optimization algorithm is to re duce the number of the triangles in the mesh,and keep the accuracy of the interp olation at the same time.

反求工程中曲面反求得到的数据模型虽然可以正确反映件的拓扑结构，但网格上的三角形的数量一般比较大。