Some polypide surface membrane and food vacuole membrane showed multilayer thread-like change.

有些虫体表、食物泡多层螺纹样改变。

Methods To fixup internally by Luowenke s needle on 48 cases of displacement clavicle fracture.

方法将48例锁骨移位性骨折患者行切开复位螺纹克氏针内固定。

Good toughness and thermal cracking resistance.Used in the stands of prefinish rolling.Suitable for hot rolling thread steel.

具有优良的韧性和抗热烈纹能力,适用于预精轧机架和热轧螺纹钢.

The mainstructure parameters of spirally grooved tube are diameter of tube, fin pitch,corrugation depth, wall thickness, spirally angle and spira.

螺旋槽管(亦称螺纹管)是其中的个重要分支,它是种优良的高效异形强化传热管件。

A compression moulded part, which has nut inserts and flanges at both ends, is difficult to demould and set in the inserts.

塑件外侧两端各有突缘，且内嵌内螺纹嵌件，造成侧凹脱模和嵌件置入困难。

With certain shapes of or canula, elongated caps are made to cover both canula and threaded portion, and seal the canula at its top.

根据管口和管的不同形状，可以制造细长的管以管和螺纹部分，并在顶部封住管。

This paper researches into enhanced heat transfer of condensation of splitting gas of waste plastics and R113 on the general smooth tubes,the screw tubes and the aculei finned tubes.

本文研究制冷剂R113和废塑料制汽油过程中产生的裂解气在水平光滑管、螺纹管与“犁刺”管上的冷凝强化传热。

Some polypide surface membrane and food vacuole membrane showed multilayer thread-like change.

有些虫体表膜、食物泡膜呈现多层螺膜样改变。

Methods To fixup internally by Luowenke s needle on 48 cases of displacement clavicle fracture.

方法将48例锁骨移位性骨折患者行切开复位螺克氏针内固定。

Good toughness and thermal cracking resistance.Used in the stands of prefinish rolling.Suitable for hot rolling thread steel.

具有的韧性和抗热烈能力,适用于预精轧机架和热轧螺钢.

The mainstructure parameters of spirally grooved tube are diameter of tube, fin pitch,corrugation depth, wall thickness, spirally angle and spira.

螺旋槽管(亦称螺管)是其中的个重要分支,它是种的高效异形强化传热管件。

A compression moulded part, which has nut inserts and flanges at both ends, is difficult to demould and set in the inserts.

塑件外侧两端各有突缘，且内内螺件，造成侧凹脱模和件置入困难。

With certain shapes of or canula, elongated caps are made to cover both canula and threaded portion, and seal the canula at its top.

根据管口和导管的不同形状，可以制造细长的管盖以覆盖导管和螺部分，并在顶部封住导管。

This paper researches into enhanced heat transfer of condensation of splitting gas of waste plastics and R113 on the general smooth tubes,the screw tubes and the aculei finned tubes.

本文研究制冷剂R113和废塑料制汽油过程中产生的裂解气在水平光滑管、螺管与“犁刺”管上的冷凝强化传热。

Some polypide surface membrane and food vacuole membrane showed multilayer thread-like change.

有些虫体表膜、食物泡膜呈现多层螺纹膜样改变。

Methods To fixup internally by Luowenke s needle on 48 cases of displacement clavicle fracture.

方法将48例锁骨移位性骨折患者行切开复位螺纹克氏定。

Good toughness and thermal cracking resistance.Used in the stands of prefinish rolling.Suitable for hot rolling thread steel.

具有优良的韧性和抗热烈纹能力,适用于预精轧机架和热轧螺纹钢.

The mainstructure parameters of spirally grooved tube are diameter of tube, fin pitch,corrugation depth, wall thickness, spirally angle and spira.

螺旋槽管(亦称螺纹管)是其中的个重要分支,它是种优良的高效异形强化传热管件。

A compression moulded part, which has nut inserts and flanges at both ends, is difficult to demould and set in the inserts.

塑件外两端各有突缘，且嵌螺纹嵌件，造成模和嵌件置入困难。

With certain shapes of or canula, elongated caps are made to cover both canula and threaded portion, and seal the canula at its top.

根据管口和导管的不同形状，可以制造细长的管盖以覆盖导管和螺纹部分，并在顶部封住导管。

This paper researches into enhanced heat transfer of condensation of splitting gas of waste plastics and R113 on the general smooth tubes,the screw tubes and the aculei finned tubes.

本文研究制冷剂R113和废塑料制汽油过程中产生的裂解气在水平光滑管、螺纹管与“犁刺”管上的冷凝强化传热。

Some polypide surface membrane and food vacuole membrane showed multilayer thread-like change.

有些虫体表膜、食物泡膜呈现多层螺纹膜样改变。

Methods To fixup internally by Luowenke s needle on 48 cases of displacement clavicle fracture.

方法将48例锁骨移位性骨折患者行切开复位螺纹克氏针内固。

Good toughness and thermal cracking resistance.Used in the stands of prefinish rolling.Suitable for hot rolling thread steel.

有优良的韧性和抗热烈纹能力,适用于预精轧机架和热轧螺纹钢.

The mainstructure parameters of spirally grooved tube are diameter of tube, fin pitch,corrugation depth, wall thickness, spirally angle and spira.

螺旋槽管(亦称螺纹管)是其中的个重要分支,它是种优良的高效异形强化传热管件。

A compression moulded part, which has nut inserts and flanges at both ends, is difficult to demould and set in the inserts.

塑件外侧两端各有突缘，且内嵌内螺纹嵌件，侧凹脱模和嵌件置入困难。

With certain shapes of or canula, elongated caps are made to cover both canula and threaded portion, and seal the canula at its top.

根据管口和导管的不同形状，可以制细长的管盖以覆盖导管和螺纹部分，并在顶部封住导管。

This paper researches into enhanced heat transfer of condensation of splitting gas of waste plastics and R113 on the general smooth tubes,the screw tubes and the aculei finned tubes.

本文研究制冷剂R113和废塑料制汽油过程中产生的裂解气在水平光滑管、螺纹管与“犁刺”管上的冷凝强化传热。

Some polypide surface membrane and food vacuole membrane showed multilayer thread-like change.

有些虫体表膜、食物泡膜呈现多层螺纹膜样改变。

Methods To fixup internally by Luowenke s needle on 48 cases of displacement clavicle fracture.

方法将48例锁骨移位性骨折患者行切开复位螺纹克氏针内固定。

Good toughness and thermal cracking resistance.Used in the stands of prefinish rolling.Suitable for hot rolling thread steel.

具有优良韧性和抗热烈纹能力,适用于预精轧机架和热轧螺纹钢.

The mainstructure parameters of spirally grooved tube are diameter of tube, fin pitch,corrugation depth, wall thickness, spirally angle and spira.

螺旋槽管(亦称螺纹管)是分支,它是种优良高效异形强化传热管件。

A compression moulded part, which has nut inserts and flanges at both ends, is difficult to demould and set in the inserts.

塑件外侧两端各有突缘，且内嵌内螺纹嵌件，造成侧凹脱模和嵌件置入困难。

With certain shapes of or canula, elongated caps are made to cover both canula and threaded portion, and seal the canula at its top.

根据管口和导管不同形状，可以制造细长管盖以覆盖导管和螺纹部分，并在顶部封住导管。

This paper researches into enhanced heat transfer of condensation of splitting gas of waste plastics and R113 on the general smooth tubes,the screw tubes and the aculei finned tubes.

本文研究制冷剂R113和废塑料制汽油过程产生裂解气在水平光滑管、螺纹管与“犁刺”管上冷凝强化传热。

Some polypide surface membrane and food vacuole membrane showed multilayer thread-like change.

有些虫体表膜、食物泡膜呈现多层螺纹膜样改变。

Methods To fixup internally by Luowenke s needle on 48 cases of displacement clavicle fracture.

方法将48例锁骨移位性骨折患者行切开复位螺纹克氏针内固定。

Good toughness and thermal cracking resistance.Used in the stands of prefinish rolling.Suitable for hot rolling thread steel.

具有优良的韧性和抗热烈纹能力,适用于预精轧机架和热轧螺纹钢.

The mainstructure parameters of spirally grooved tube are diameter of tube, fin pitch,corrugation depth, wall thickness, spirally angle and spira.

螺旋槽管(亦称螺纹管)是其中的个重要分支,它是种优良的高效异形强化传热管件。

A compression moulded part, which has nut inserts and flanges at both ends, is difficult to demould and set in the inserts.

塑件外侧两端各有突缘，且内嵌内螺纹嵌件，造成侧凹脱模和嵌件置入困难。

With certain shapes of or canula, elongated caps are made to cover both canula and threaded portion, and seal the canula at its top.

根据管口和导管的不同形状，可以造细长的管盖以覆盖导管和螺纹部分，并在顶部封住导管。

This paper researches into enhanced heat transfer of condensation of splitting gas of waste plastics and R113 on the general smooth tubes,the screw tubes and the aculei finned tubes.

本文冷剂R113和废塑料汽油过程中产生的裂解气在水平光滑管、螺纹管与“犁刺”管上的冷凝强化传热。

Some polypide surface membrane and food vacuole membrane showed multilayer thread-like change.

有些虫体表膜、食物泡膜呈现多层螺纹膜样改变。

Methods To fixup internally by Luowenke s needle on 48 cases of displacement clavicle fracture.

方法将48例锁骨移位性骨折患者行切开复位螺纹克氏针内固定。

Good toughness and thermal cracking resistance.Used in the stands of prefinish rolling.Suitable for hot rolling thread steel.

具有良的韧性和抗热烈纹能力,适用于预精轧机架和热轧螺纹钢.

The mainstructure parameters of spirally grooved tube are diameter of tube, fin pitch,corrugation depth, wall thickness, spirally angle and spira.

螺旋槽(螺纹)是其中的个重要分支,它是良的高效异形强化传热件。

A compression moulded part, which has nut inserts and flanges at both ends, is difficult to demould and set in the inserts.

塑件外侧两端各有突缘，且内嵌内螺纹嵌件，造成侧凹脱模和嵌件置入困难。

With certain shapes of or canula, elongated caps are made to cover both canula and threaded portion, and seal the canula at its top.

根据口和导的不同形状，可以制造细长的盖以覆盖导和螺纹部分，并在顶部封住导。

This paper researches into enhanced heat transfer of condensation of splitting gas of waste plastics and R113 on the general smooth tubes,the screw tubes and the aculei finned tubes.

本文研究制冷剂R113和废塑料制汽油过程中产生的裂解气在水平光滑、螺纹与“犁刺”上的冷凝强化传热。

Some polypide surface membrane and food vacuole membrane showed multilayer thread-like change.

有些虫体表膜、食物泡膜呈现多层螺纹膜样改变。

Methods To fixup internally by Luowenke s needle on 48 cases of displacement clavicle fracture.

方法将48例锁骨移位骨折患者行切开复位螺纹克氏针固定。

Good toughness and thermal cracking resistance.Used in the stands of prefinish rolling.Suitable for hot rolling thread steel.

具有优良的韧热烈纹能力,适用于预精轧机架热轧螺纹钢.

The mainstructure parameters of spirally grooved tube are diameter of tube, fin pitch,corrugation depth, wall thickness, spirally angle and spira.

螺旋槽管(亦称螺纹管)是其中的个重要分支,它是种优良的高效异形强化传热管件。

A compression moulded part, which has nut inserts and flanges at both ends, is difficult to demould and set in the inserts.

塑件外侧两端各有突缘，螺纹件，造成侧凹脱模件置入困难。

With certain shapes of or canula, elongated caps are made to cover both canula and threaded portion, and seal the canula at its top.

根据管口导管的不同形状，可以制造细长的管盖以覆盖导管螺纹部分，并在顶部封住导管。

This paper researches into enhanced heat transfer of condensation of splitting gas of waste plastics and R113 on the general smooth tubes,the screw tubes and the aculei finned tubes.

本文研究制冷剂R113废塑料制汽油过程中产生的裂解气在水平光滑管、螺纹管与“犁刺”管上的冷凝强化传热。

Some polypide surface membrane and food vacuole membrane showed multilayer thread-like change.

有些虫体表膜、膜呈现多层纹膜样改变。

Methods To fixup internally by Luowenke s needle on 48 cases of displacement clavicle fracture.

方法将48例锁骨移位性骨折患者行切开复位纹克氏针内固定。

Good toughness and thermal cracking resistance.Used in the stands of prefinish rolling.Suitable for hot rolling thread steel.

具有优良的韧性抗热烈纹能力,适用于预精轧机架热轧纹钢.

The mainstructure parameters of spirally grooved tube are diameter of tube, fin pitch,corrugation depth, wall thickness, spirally angle and spira.

旋槽(亦称纹)是其中的个重要分支,它是种优良的高效异形强化传热件。

A compression moulded part, which has nut inserts and flanges at both ends, is difficult to demould and set in the inserts.

塑件外侧两端各有突缘，且内嵌内纹嵌件，造成侧凹脱模嵌件置入困难。

With certain shapes of or canula, elongated caps are made to cover both canula and threaded portion, and seal the canula at its top.

根据口导的不同形状，可以制造细长的盖以覆盖导纹部分，并在顶部封住导。

This paper researches into enhanced heat transfer of condensation of splitting gas of waste plastics and R113 on the general smooth tubes,the screw tubes and the aculei finned tubes.

本文研究制冷剂R113废塑料制汽油过程中产生的裂解气在水平光滑、纹与“犁刺”上的冷凝强化传热。

Some polypide surface membrane and food vacuole membrane showed multilayer thread-like change.

有些虫体表膜、食物泡膜呈现多层螺膜样改变。

Methods To fixup internally by Luowenke s needle on 48 cases of displacement clavicle fracture.

方法将48例锁骨移位性骨折患者行切开复位螺克氏针内固定。

Good toughness and thermal cracking resistance.Used in the stands of prefinish rolling.Suitable for hot rolling thread steel.

具有优良的韧性和抗热烈能力,适用于预精轧机架和热轧螺钢.

The mainstructure parameters of spirally grooved tube are diameter of tube, fin pitch,corrugation depth, wall thickness, spirally angle and spira.

螺旋槽(亦称螺)其中的个重要,种优良的高效异形强化传热件。

A compression moulded part, which has nut inserts and flanges at both ends, is difficult to demould and set in the inserts.

塑件外侧两端各有突缘，且内嵌内螺嵌件，造成侧凹脱模和嵌件置入困难。

With certain shapes of or canula, elongated caps are made to cover both canula and threaded portion, and seal the canula at its top.

根据口和导的不同形状，可以制造细长的盖以覆盖导和螺部，并在顶部封住导。

This paper researches into enhanced heat transfer of condensation of splitting gas of waste plastics and R113 on the general smooth tubes,the screw tubes and the aculei finned tubes.

本文研究制冷剂R113和废塑料制汽油过程中产生的裂解气在水平光滑、螺与“犁刺”上的冷凝强化传热。