Casehardening involves a change of surface properties to produce ahard,wear-resistant shell about a tough,fracture-resistant core.

表面硬化包含一个高硬度、磨性的壳以及高韧性的芯。

The developed dual phase cast steel is applicable as scaleboard materials in a middle or smaller type of ball mill.

在给定的低铬铸铁条件,当冲击载荷较小时,铸态复相磨钢具有良好的冲击磨性。

The high wearing resistance of the samples after hydrocooling and air cooling was partially attributed to martensite transformation and work-hardening.

经水冷和空冷的具有高磨性的重要原因是其在磨损过程中诱发了马氏体相变,出现加工硬化现象。

This paper deals with the wear resistance and anti-seizing behavior of sulfonitrided high speed steel by comparing with that without sulfonitriding.

研究了高速钢经硫氮理后的磨性及抗咬合性，并与未经表面理的进行了比较。

In order to strengthen its antifriction property, the material nature of the boards chooses a special formula of high molybdenum, high chromium and nickelic.

为增强其磨性，衬板采用的是高钼、高铬、高镍特种配方。

In this paper, the PVA of major component in the Sensitized emulsion was modified by the polyreaction with formaldehyde, butyl aldehyde, furfural and alcohol.

用甲醛、丁醛、糠醛对重氮感光胶中的主要成分聚乙烯醇进行改性,以增强感光胶的水性和磨性。

Casehardening involves a change of surface properties to produce ahard,wear-resistant shell about a tough,fracture-resistant core.

表面硬化包含一个高硬度、磨性的壳以及高韧性的芯。

The developed dual phase cast steel is applicable as scaleboard materials in a middle or smaller type of ball mill.

在给定的低铬铸铁试样条件,击载荷较小时,铸态复相磨具有良好的击磨性。

The high wearing resistance of the samples after hydrocooling and air cooling was partially attributed to martensite transformation and work-hardening.

水冷和空冷的试样具有高磨性的重要原因是其在磨损过程中诱发了马氏体相变,出现加工硬化现象。

This paper deals with the wear resistance and anti-seizing behavior of sulfonitrided high speed steel by comparing with that without sulfonitriding.

研究了高硫氮共渗处理后的磨性及抗咬合性，并与未表面处理的试样进行了比较。

In order to strengthen its antifriction property, the material nature of the boards chooses a special formula of high molybdenum, high chromium and nickelic.

为增强其磨性，衬板采用的是高钼、高铬、高镍特种配方。

In this paper, the PVA of major component in the Sensitized emulsion was modified by the polyreaction with formaldehyde, butyl aldehyde, furfural and alcohol.

用甲醛、丁醛、糠醛对重氮感光胶中的主要成分聚乙烯醇进行改性,以增强感光胶的水性和磨性。

Casehardening involves a change of surface properties to produce ahard,wear-resistant shell about a tough,fracture-resistant core.

表面硬化包含一个硬度、磨性的壳以性的芯。

The developed dual phase cast steel is applicable as scaleboard materials in a middle or smaller type of ball mill.

在给定的低铬铸铁下试样条件下,当冲击载荷较小时,铸态复相磨钢具有良好的冲击磨性。

The high wearing resistance of the samples after hydrocooling and air cooling was partially attributed to martensite transformation and work-hardening.

经水冷和空冷的试样具有磨性的重要原因是其在磨损过程中诱发了马氏体相变,出现加工硬化现象。

This paper deals with the wear resistance and anti-seizing behavior of sulfonitrided high speed steel by comparing with that without sulfonitriding.

研究了速钢经硫氮共渗处理后的磨性抗咬合性，经表面处理的试样进行了比较。

In order to strengthen its antifriction property, the material nature of the boards chooses a special formula of high molybdenum, high chromium and nickelic.

为增强其磨性，衬板采用的是钼、铬、镍特种配方。

In this paper, the PVA of major component in the Sensitized emulsion was modified by the polyreaction with formaldehyde, butyl aldehyde, furfural and alcohol.

用甲醛、丁醛、糠醛对重氮感光胶中的主要成分聚乙烯醇进行改性,以增强感光胶的水性和磨性。

Casehardening involves a change of surface properties to produce ahard,wear-resistant shell about a tough,fracture-resistant core.

表面硬化包含一个高硬度、磨性的壳以及高韧性的芯。

The developed dual phase cast steel is applicable as scaleboard materials in a middle or smaller type of ball mill.

在给定的低铬铸铁下试样条件下,当冲击载荷较小时,铸态复相磨钢具有良好的冲击磨性。

The high wearing resistance of the samples after hydrocooling and air cooling was partially attributed to martensite transformation and work-hardening.

经水冷和空冷的试样具有高磨性的重要原因是其在磨损过程中诱发了马氏体相变,出现加工硬化现象。

This paper deals with the wear resistance and anti-seizing behavior of sulfonitrided high speed steel by comparing with that without sulfonitriding.

研究了高速钢经硫氮共渗处理后的磨性及抗咬合性，并与未经表面处理的试样进行了比较。

In order to strengthen its antifriction property, the material nature of the boards chooses a special formula of high molybdenum, high chromium and nickelic.

为增强其磨性，衬的是高钼、高铬、高镍特种配方。

In this paper, the PVA of major component in the Sensitized emulsion was modified by the polyreaction with formaldehyde, butyl aldehyde, furfural and alcohol.

甲醛、丁醛、糠醛对重氮感光胶中的主要成分聚乙烯醇进行改性,以增强感光胶的水性和磨性。

Casehardening involves a change of surface properties to produce ahard,wear-resistant shell about a tough,fracture-resistant core.

表面硬化包含一个高硬度、磨性的壳以及高韧性的芯。

The developed dual phase cast steel is applicable as scaleboard materials in a middle or smaller type of ball mill.

在给定的低铬铸样条件,当冲击载荷较小时,铸态复相磨钢具有良好的冲击磨性。

The high wearing resistance of the samples after hydrocooling and air cooling was partially attributed to martensite transformation and work-hardening.

经水冷和空冷的样具有高磨性的重要原因是其在磨损过程中诱发了马氏体相变,出现加工硬化现象。

This paper deals with the wear resistance and anti-seizing behavior of sulfonitrided high speed steel by comparing with that without sulfonitriding.

研究了高速钢经硫氮共后的磨性及抗咬合性，并与未经表面的样进行了比较。

In order to strengthen its antifriction property, the material nature of the boards chooses a special formula of high molybdenum, high chromium and nickelic.

为增强其磨性，衬板采用的是高钼、高铬、高镍特种配方。

In this paper, the PVA of major component in the Sensitized emulsion was modified by the polyreaction with formaldehyde, butyl aldehyde, furfural and alcohol.

用甲醛、丁醛、糠醛对重氮感光胶中的主要成分聚乙烯醇进行改性,以增强感光胶的水性和磨性。

Casehardening involves a change of surface properties to produce ahard,wear-resistant shell about a tough,fracture-resistant core.

表面硬化包含一个高硬度、性的壳以及高韧性的芯。

The developed dual phase cast steel is applicable as scaleboard materials in a middle or smaller type of ball mill.

在给定的低铬铸铁下试样条件下,当冲击载荷较小时,铸态复相具有良好的冲击性。

The high wearing resistance of the samples after hydrocooling and air cooling was partially attributed to martensite transformation and work-hardening.

经水冷和空冷的试样具有高性的重要原因是其在损过程中诱发了马氏体相,加工硬化象。

This paper deals with the wear resistance and anti-seizing behavior of sulfonitrided high speed steel by comparing with that without sulfonitriding.

研究了高速经硫氮共渗处理后的性及抗咬合性，并与未经表面处理的试样进行了比较。

In order to strengthen its antifriction property, the material nature of the boards chooses a special formula of high molybdenum, high chromium and nickelic.

为增强其性，衬板采用的是高钼、高铬、高镍特种配方。

In this paper, the PVA of major component in the Sensitized emulsion was modified by the polyreaction with formaldehyde, butyl aldehyde, furfural and alcohol.

用甲醛、丁醛、糠醛对重氮感光胶中的主要成分聚乙烯醇进行改性,以增强感光胶的水性和性。

Casehardening involves a change of surface properties to produce ahard,wear-resistant shell about a tough,fracture-resistant core.

表包含一个高度、磨性的壳以及高韧性的芯。

The developed dual phase cast steel is applicable as scaleboard materials in a middle or smaller type of ball mill.

在给定的低铬铸铁下试样条件下,当冲击载荷较小时,铸态复相磨钢具有良好的冲击磨性。

The high wearing resistance of the samples after hydrocooling and air cooling was partially attributed to martensite transformation and work-hardening.

经水冷和空冷的试样具有高磨性的重要原因是其在磨损过程中诱发了马氏体相变,出现加工现象。

This paper deals with the wear resistance and anti-seizing behavior of sulfonitrided high speed steel by comparing with that without sulfonitriding.

研究了高速钢经硫氮共渗处理后的磨性及抗咬合性，并与未经表处理的试样进行了比较。

In order to strengthen its antifriction property, the material nature of the boards chooses a special formula of high molybdenum, high chromium and nickelic.

其磨性，衬板采用的是高钼、高铬、高镍特种配方。

In this paper, the PVA of major component in the Sensitized emulsion was modified by the polyreaction with formaldehyde, butyl aldehyde, furfural and alcohol.

用甲醛、丁醛、糠醛对重氮感光胶中的主要成分聚乙烯醇进行改性,以感光胶的水性和磨性。

Casehardening involves a change of surface properties to produce ahard,wear-resistant shell about a tough,fracture-resistant core.

表面化包含一个高、磨性壳以及高韧性芯。

The developed dual phase cast steel is applicable as scaleboard materials in a middle or smaller type of ball mill.

在给定低铬铸铁下条件下,当冲击载荷较小时,铸态复相磨钢具有良好冲击磨性。

The high wearing resistance of the samples after hydrocooling and air cooling was partially attributed to martensite transformation and work-hardening.

经水冷和空冷具有高磨性重要原因是其在磨损过程中诱发了马氏体相变,出现加工化现象。

This paper deals with the wear resistance and anti-seizing behavior of sulfonitrided high speed steel by comparing with that without sulfonitriding.

研究了高速钢经硫氮共渗处理后磨性及抗咬合性，并与未经表面处理进行了比较。

In order to strengthen its antifriction property, the material nature of the boards chooses a special formula of high molybdenum, high chromium and nickelic.

为增强其磨性，衬板采用是高钼、高铬、高镍特种配方。

In this paper, the PVA of major component in the Sensitized emulsion was modified by the polyreaction with formaldehyde, butyl aldehyde, furfural and alcohol.

用甲醛、丁醛、糠醛对重氮感光胶中主要成分聚乙烯醇进行改性,以增强感光胶水性和磨性。

Casehardening involves a change of surface properties to produce ahard,wear-resistant shell about a tough,fracture-resistant core.

表面硬化包含一个高硬度、性的壳以及高韧性的芯。

The developed dual phase cast steel is applicable as scaleboard materials in a middle or smaller type of ball mill.

给定的低铬铸铁下试样条件下,当冲击载荷较小时,铸态复相钢具有良好的冲击性。

The high wearing resistance of the samples after hydrocooling and air cooling was partially attributed to martensite transformation and work-hardening.

经空的试样具有高性的重要原因是损过程中诱发了马氏体相变,出现加工硬化现象。

This paper deals with the wear resistance and anti-seizing behavior of sulfonitrided high speed steel by comparing with that without sulfonitriding.

研究了高速钢经硫氮共渗处理后的性及抗咬合性，并与未经表面处理的试样进行了比较。

In order to strengthen its antifriction property, the material nature of the boards chooses a special formula of high molybdenum, high chromium and nickelic.

为增强性，衬板采用的是高钼、高铬、高镍特种配方。

In this paper, the PVA of major component in the Sensitized emulsion was modified by the polyreaction with formaldehyde, butyl aldehyde, furfural and alcohol.

用甲醛、丁醛、糠醛对重氮感光胶中的主要成分聚乙烯醇进行改性,以增强感光胶的性性。