He joined two blocks of wood with glue.

他用胶水把两块木头粘合起。

That is a padhesive with the powder Diecty,Compress tablets and replenisher,Disinteante,adhesive of the capsula.

要用作药物固体制剂，全粉末直压片的干燥粘合剂，胶囊填充剂,崩解剂，湿法造粒粘合剂和着色的延展剂。

Using self-prepared sodium naphthalide solution,PTFE micropore membrane was modified to improve its wetness and adhesiveness.

用自制的钠—萘处理液,改性聚四氟乙烯(PTFE)微孔膜,改善薄膜表面的润湿性和粘合性。

B-the layers of wood together with glue.

用乳胶把一层层木板粘合起。

All perpends are to be strictly true and square and the whole properly bonded together.

所有直角处必须精确和方正，且整体要粘合妥当。

Chlorhydrin rubber properties of physical and chemical. process technology. adhesivenessand use in cold reducting machines were mainly introduced.

要介绍了氯醇橡胶的机性能、工艺性能、粘合性能及在制冷压缩机密封中的应用。

The same forces and mechanisms responsible for size enlargement in roller compaction are responsible for bond formation during tabletting.

碾压中施加于颗粒增大的力和机理也用于压片的粘合成型。

The Board of the binders with paperboard adhesive between a collection, this intermolecular bonding of itself is referred to as coacervate.

渗透到纸板的黏合剂同纸板表面的黏合剂形成一个集合，这种粘合身分子的粘合称为凝聚粘合。

This paper has predicted indirectly by means of measuring the equivalent viscosity of resorcin-formaldehyde resin liquor(thereinafter referred to as RF resin).

通过测量在线取样的苯二酚-甲醛树脂(以下简称RF树脂)溶液的当量粘度,判断RF树脂的粘合性能。

Benzylic ether phenolic resin is one of the main components of foundry polyurethane binder; its structure and preparation condition determine the performances of polyurethane binder.

苯醚型酚醛树脂是铸造用聚氨酯粘合剂的要成份之一,它的结构及合成工艺条件决定了该类粘合剂性能。

In the compression moulding technology, preheat and prepressing procedures are added to improve the flowability of the bond and physical and mechanical properties of the product.

在压缩模塑工艺中，增加预热、预压工序，提高粘合剂的流动性和产的物理机性能。

When container with an inner aluminum-foil cover passes inductorium, heat will be immediately generated and makes the aluminum-foil layer stick tightly to the bottle mouth to avoid air leakage.

当装有铝箔内盖的容器经过感应圈时，即产生涡流瞬时发热，使铝箔面与瓶口紧密地粘合，达到气密封口的目的。

The composition and syntheses of a newly developed specific binding agent for cellulated paperboard and the influence of components of binding agent on adhesive power and drying speed are presented.

对蜂窝纸板专用粘合剂在合成路线,工艺配方等方面进行了讨论,并对该种粘合剂的组分对其在粘度和干燥速度等方面的影响进行了分析。

In order to overcome the disadvantage of low rubfastness of conventional pigment dyeing , a new type covering pigment with ultramicro azo dye as core and acrylate adhesive as shell was presented.

为克服常规涂料染色摩擦牢度低的弊病,作者提出采用以超微偶氮颜料为核,以丙烯酸酯类粘合剂为壳的新型颜料包覆体染色新的探索途径。

He joined two blocks of wood with glue.

他用胶水把两块木头粘合起来。

That is a padhesive with the powder Diecty,Compress tablets and replenisher,Disinteante,adhesive of the capsula.

本品主要用作药物固体制剂，全粉末直接压片的干燥粘合剂，胶囊填充剂,崩解剂，湿法造粒粘合剂和着色的延展剂。

Using self-prepared sodium naphthalide solution,PTFE micropore membrane was modified to improve its wetness and adhesiveness.

用自制的钠—萘处理液,改聚四氟乙烯(PTFE)微孔膜,改善薄膜表面的润湿和粘合。

B-the layers of wood together with glue.

用乳胶把一层层木板粘合起来。

All perpends are to be strictly true and square and the whole properly bonded together.

所有直角处必须精确和方正，且整体要粘合妥当。

Chlorhydrin rubber properties of physical and chemical. process technology. adhesivenessand use in cold reducting machines were mainly introduced.

主要介绍了胶的机、工、粘合及在制冷压缩机密封中的应用。

The same forces and mechanisms responsible for size enlargement in roller compaction are responsible for bond formation during tabletting.

碾压中施加于颗粒增大的力和机理也用于压片的粘合成型。

The Board of the binders with paperboard adhesive between a collection, this intermolecular bonding of itself is referred to as coacervate.

渗透到纸板的黏合剂同纸板表面的黏合剂间形成一个集合，这种粘合本身分子间的粘合称为凝聚粘合。

This paper has predicted indirectly by means of measuring the equivalent viscosity of resorcin-formaldehyde resin liquor(thereinafter referred to as RF resin).

通过测量在线取样的间苯二酚-甲醛树脂(以下简称RF树脂)溶液的当量粘度,来间接判断RF树脂的粘合。

Benzylic ether phenolic resin is one of the main components of foundry polyurethane binder; its structure and preparation condition determine the performances of polyurethane binder.

苯醚型酚醛树脂是铸造用聚氨酯粘合剂的主要成份之一,它的结构及合成工条件决定了该类粘合剂。

In the compression moulding technology, preheat and prepressing procedures are added to improve the flowability of the bond and physical and mechanical properties of the product.

在压缩模塑工中，增加预热、预压工序，提高粘合剂的流动和产品的物理机。

When container with an inner aluminum-foil cover passes inductorium, heat will be immediately generated and makes the aluminum-foil layer stick tightly to the bottle mouth to avoid air leakage.

当装有铝箔内盖的容器经过感应圈时，即产生涡流瞬时发热，使铝箔面与瓶口紧密地粘合，达到气密封口的目的。

The composition and syntheses of a newly developed specific binding agent for cellulated paperboard and the influence of components of binding agent on adhesive power and drying speed are presented.

对蜂窝纸板专用粘合剂在合成路线,工配方等方面进行了讨论,并对该种粘合剂的组分对其在粘度和干燥速度等方面的影响进行了分析。

In order to overcome the disadvantage of low rubfastness of conventional pigment dyeing , a new type covering pigment with ultramicro azo dye as core and acrylate adhesive as shell was presented.

为克服常规涂料染色摩擦牢度低的弊病,作者提出采用以超微偶氮颜料为核,以丙烯酸酯类粘合剂为壳的新型颜料包覆体染色新的探索途径。

He joined two blocks of wood with glue.

他用胶水把两块木头粘合起来。

That is a padhesive with the powder Diecty,Compress tablets and replenisher,Disinteante,adhesive of the capsula.

本品主要用作药物固体制剂，全粉末直接压片的干燥粘合剂，胶囊填充剂,崩解剂，湿法造粒粘合剂和着色的延展剂。

Using self-prepared sodium naphthalide solution,PTFE micropore membrane was modified to improve its wetness and adhesiveness.

用自制的钠—液,改性聚四氟乙烯(PTFE)微孔膜,改善薄膜表面的润湿性和粘合性。

B-the layers of wood together with glue.

用乳胶把层层木板粘合起来。

All perpends are to be strictly true and square and the whole properly bonded together.

所有直角必须精确和方正，且整体要粘合妥当。

Chlorhydrin rubber properties of physical and chemical. process technology. adhesivenessand use in cold reducting machines were mainly introduced.

主要介绍了氯醇橡胶的机性能、工艺性能、粘合性能及在制冷压缩机密封中的应用。

The same forces and mechanisms responsible for size enlargement in roller compaction are responsible for bond formation during tabletting.

碾压中施加于颗粒增大的力和机也用于压片的粘合成型。

The Board of the binders with paperboard adhesive between a collection, this intermolecular bonding of itself is referred to as coacervate.

渗透到纸板的黏合剂同纸板表面的黏合剂间形成合，这种粘合本身分子间的粘合称为凝聚粘合。

This paper has predicted indirectly by means of measuring the equivalent viscosity of resorcin-formaldehyde resin liquor(thereinafter referred to as RF resin).

通过测量在线取样的间苯二酚-甲醛树脂(以下简称RF树脂)溶液的当量粘度,来间接判断RF树脂的粘合性能。

Benzylic ether phenolic resin is one of the main components of foundry polyurethane binder; its structure and preparation condition determine the performances of polyurethane binder.

苯醚型酚醛树脂是铸造用聚氨酯粘合剂的主要成份之,它的结构及合成工艺条件决定了该类粘合剂性能。

In the compression moulding technology, preheat and prepressing procedures are added to improve the flowability of the bond and physical and mechanical properties of the product.

在压缩模塑工艺中，增加预热、预压工序，提高粘合剂的流动性和产品的物机性能。

When container with an inner aluminum-foil cover passes inductorium, heat will be immediately generated and makes the aluminum-foil layer stick tightly to the bottle mouth to avoid air leakage.

当装有铝箔内盖的容器经过感应圈时，即产生涡流瞬时发热，使铝箔面与瓶口紧密地粘合，达到气密封口的目的。

The composition and syntheses of a newly developed specific binding agent for cellulated paperboard and the influence of components of binding agent on adhesive power and drying speed are presented.

对蜂窝纸板专用粘合剂在合成路线,工艺配方等方面进行了讨论,并对该种粘合剂的组分对其在粘度和干燥速度等方面的影响进行了分析。

In order to overcome the disadvantage of low rubfastness of conventional pigment dyeing , a new type covering pigment with ultramicro azo dye as core and acrylate adhesive as shell was presented.

为克服常规涂料染色摩擦牢度低的弊病,作者提出采用以超微偶氮颜料为核,以丙烯酸酯类粘合剂为壳的新型颜料包覆体染色新的探索途径。

He joined two blocks of wood with glue.

他用胶水把两块木头粘合起来。

That is a padhesive with the powder Diecty,Compress tablets and replenisher,Disinteante,adhesive of the capsula.

本品主要用作药物固体制剂，全粉末直的干燥粘合剂，胶囊填充剂,崩解剂，湿法造粒粘合剂和着色的延展剂。

Using self-prepared sodium naphthalide solution,PTFE micropore membrane was modified to improve its wetness and adhesiveness.

用自制的钠—萘处理液,改性聚四氟乙烯(PTFE)微孔膜,改善薄膜表面的润湿性和粘合性。

B-the layers of wood together with glue.

用乳胶把一层层木板粘合起来。

All perpends are to be strictly true and square and the whole properly bonded together.

所有直角处必须精确和方正，且整体要粘合妥当。

Chlorhydrin rubber properties of physical and chemical. process technology. adhesivenessand use in cold reducting machines were mainly introduced.

主要介绍了氯醇橡胶的机性能、工艺性能、粘合性能及在制冷缩机密封中的应用。

The same forces and mechanisms responsible for size enlargement in roller compaction are responsible for bond formation during tabletting.

碾中施加于颗粒增大的力和机理也用于的粘合成型。

The Board of the binders with paperboard adhesive between a collection, this intermolecular bonding of itself is referred to as coacervate.

渗透到纸板的黏合剂同纸板表面的黏合剂间形成一个集合，这种粘合本身分子间的粘合称为凝聚粘合。

This paper has predicted indirectly by means of measuring the equivalent viscosity of resorcin-formaldehyde resin liquor(thereinafter referred to as RF resin).

通过测量在线取样的间苯二酚-甲(以下简称RF)溶液的当量粘度,来间判断RF的粘合性能。

Benzylic ether phenolic resin is one of the main components of foundry polyurethane binder; its structure and preparation condition determine the performances of polyurethane binder.

苯醚型酚是铸造用聚氨酯粘合剂的主要成份之一,它的结构及合成工艺条件决定了该类粘合剂性能。

In the compression moulding technology, preheat and prepressing procedures are added to improve the flowability of the bond and physical and mechanical properties of the product.

在缩模塑工艺中，增加预热、预工序，提高粘合剂的流动性和产品的物理机性能。

When container with an inner aluminum-foil cover passes inductorium, heat will be immediately generated and makes the aluminum-foil layer stick tightly to the bottle mouth to avoid air leakage.

当装有铝箔内盖的容器经过感应圈时，即产生涡流瞬时发热，使铝箔面与瓶口紧密地粘合，达到气密封口的目的。

The composition and syntheses of a newly developed specific binding agent for cellulated paperboard and the influence of components of binding agent on adhesive power and drying speed are presented.

对蜂窝纸板专用粘合剂在合成路线,工艺配方等方面进行了讨论,并对该种粘合剂的组分对其在粘度和干燥速度等方面的影响进行了分析。

In order to overcome the disadvantage of low rubfastness of conventional pigment dyeing , a new type covering pigment with ultramicro azo dye as core and acrylate adhesive as shell was presented.

为克服常规涂料染色摩擦牢度低的弊病,作者提出采用以超微偶氮颜料为核,以丙烯酸酯类粘合剂为壳的新型颜料包覆体染色新的探索途径。

He joined two blocks of wood with glue.

他用胶水把两块木头起来。

That is a padhesive with the powder Diecty,Compress tablets and replenisher,Disinteante,adhesive of the capsula.

本品主要用作药物固体剂，全粉末直接片的干燥剂，胶囊填充剂,崩解剂，湿法造粒剂和着色的延展剂。

Using self-prepared sodium naphthalide solution,PTFE micropore membrane was modified to improve its wetness and adhesiveness.

用自的钠—萘处理液,改性聚四氟乙烯(PTFE)微孔膜,改善薄膜表面的润湿性和性。

B-the layers of wood together with glue.

用乳胶把一层层木板起来。

All perpends are to be strictly true and square and the whole properly bonded together.

所有直角处必须精确和方正，且整体要当。

Chlorhydrin rubber properties of physical and chemical. process technology. adhesivenessand use in cold reducting machines were mainly introduced.

主要介绍了氯醇橡胶的机性能、工艺性能、性能及在缩机密封中的应用。

The same forces and mechanisms responsible for size enlargement in roller compaction are responsible for bond formation during tabletting.

碾中施加于颗粒增大的力和机理也用于片的成型。

The Board of the binders with paperboard adhesive between a collection, this intermolecular bonding of itself is referred to as coacervate.

渗透到纸板的黏剂同纸板表面的黏剂间形成一个集，这种本身分子间的称为凝聚。

This paper has predicted indirectly by means of measuring the equivalent viscosity of resorcin-formaldehyde resin liquor(thereinafter referred to as RF resin).

通过测量在线取样的间苯二酚-甲醛树脂(以下简称RF树脂)溶液的当量度,来间接判断RF树脂的性能。

Benzylic ether phenolic resin is one of the main components of foundry polyurethane binder; its structure and preparation condition determine the performances of polyurethane binder.

苯醚型酚醛树脂是铸造用聚氨酯剂的主要成份之一,它的结构及成工艺条件决定了该类剂性能。

In the compression moulding technology, preheat and prepressing procedures are added to improve the flowability of the bond and physical and mechanical properties of the product.

在缩模塑工艺中，增加预热、预工序，提高剂的流动性和产品的物理机性能。

When container with an inner aluminum-foil cover passes inductorium, heat will be immediately generated and makes the aluminum-foil layer stick tightly to the bottle mouth to avoid air leakage.

当装有铝箔内盖的容器经过感应圈时，即产生涡流瞬时发热，使铝箔面与瓶口紧密地，达到气密封口的目的。

The composition and syntheses of a newly developed specific binding agent for cellulated paperboard and the influence of components of binding agent on adhesive power and drying speed are presented.

对蜂窝纸板专用剂在成路线,工艺配方等方面进行了讨论,并对该种剂的组分对其在度和干燥速度等方面的影响进行了分析。

In order to overcome the disadvantage of low rubfastness of conventional pigment dyeing , a new type covering pigment with ultramicro azo dye as core and acrylate adhesive as shell was presented.

为克服常规涂料染色摩擦牢度低的弊病,作者提出采用以超微偶氮颜料为核,以丙烯酸酯类剂为壳的新型颜料包覆体染色新的探索途径。

He joined two blocks of wood with glue.

他用胶水把两块木头粘合起来。

That is a padhesive with the powder Diecty,Compress tablets and replenisher,Disinteante,adhesive of the capsula.

品主要用作药物固体制，全粉末直接压片的干燥粘合，胶囊填充,崩解，湿法造粒粘合和着色的。

Using self-prepared sodium naphthalide solution,PTFE micropore membrane was modified to improve its wetness and adhesiveness.

用自制的钠—萘处理液,改性聚四氟乙烯(PTFE)微孔膜,改善薄膜表面的润湿性和粘合性。

B-the layers of wood together with glue.

用乳胶把一层层木板粘合起来。

All perpends are to be strictly true and square and the whole properly bonded together.

所有直角处必须精确和方正，且整体要粘合妥当。

Chlorhydrin rubber properties of physical and chemical. process technology. adhesivenessand use in cold reducting machines were mainly introduced.

主要介绍了氯醇橡胶的机性能、工艺性能、粘合性能及在制冷压缩机密封中的应用。

The same forces and mechanisms responsible for size enlargement in roller compaction are responsible for bond formation during tabletting.

碾压中施加于颗粒增大的力和机理也用于压片的粘合成型。

The Board of the binders with paperboard adhesive between a collection, this intermolecular bonding of itself is referred to as coacervate.

渗透到纸板的黏合同纸板表面的黏合间形成一个集合，这种粘合子间的粘合称为凝聚粘合。

This paper has predicted indirectly by means of measuring the equivalent viscosity of resorcin-formaldehyde resin liquor(thereinafter referred to as RF resin).

通过测量在线取样的间苯二酚-甲醛树脂(以下简称RF树脂)溶液的当量粘度,来间接判断RF树脂的粘合性能。

Benzylic ether phenolic resin is one of the main components of foundry polyurethane binder; its structure and preparation condition determine the performances of polyurethane binder.

苯醚型酚醛树脂是铸造用聚氨酯粘合的主要成份之一,它的结构及合成工艺条件决定了该类粘合性能。

In the compression moulding technology, preheat and prepressing procedures are added to improve the flowability of the bond and physical and mechanical properties of the product.

在压缩模塑工艺中，增加预热、预压工序，提高粘合的流动性和产品的物理机性能。

When container with an inner aluminum-foil cover passes inductorium, heat will be immediately generated and makes the aluminum-foil layer stick tightly to the bottle mouth to avoid air leakage.

当装有铝箔内盖的容器经过感应圈时，即产生涡流瞬时发热，使铝箔面与瓶口紧密地粘合，达到气密封口的目的。

The composition and syntheses of a newly developed specific binding agent for cellulated paperboard and the influence of components of binding agent on adhesive power and drying speed are presented.

对蜂窝纸板专用粘合在合成路线,工艺配方等方面进行了讨论,并对该种粘合的组对其在粘度和干燥速度等方面的影响进行了析。

In order to overcome the disadvantage of low rubfastness of conventional pigment dyeing , a new type covering pigment with ultramicro azo dye as core and acrylate adhesive as shell was presented.

为克服常规涂料染色摩擦牢度低的弊病,作者提出采用以超微偶氮颜料为核,以丙烯酸酯类粘合为壳的新型颜料包覆体染色新的探索途径。

He joined two blocks of wood with glue.

他用胶水把两块木头粘合起来。

That is a padhesive with the powder Diecty,Compress tablets and replenisher,Disinteante,adhesive of the capsula.

品主要用作药物固体制，全粉末直接压片的干燥粘合，胶囊填充,崩解，湿法造粒粘合和着色的。

Using self-prepared sodium naphthalide solution,PTFE micropore membrane was modified to improve its wetness and adhesiveness.

用自制的钠—萘处理液,改性聚四氟乙烯(PTFE)微孔膜,改善薄膜表面的润湿性和粘合性。

B-the layers of wood together with glue.

用乳胶把一层层木板粘合起来。

All perpends are to be strictly true and square and the whole properly bonded together.

所有直角处必须精确和方正，且整体要粘合妥当。

Chlorhydrin rubber properties of physical and chemical. process technology. adhesivenessand use in cold reducting machines were mainly introduced.

主要介绍了氯醇橡胶的机性能、工艺性能、粘合性能及在制冷压缩机密封中的应用。

The same forces and mechanisms responsible for size enlargement in roller compaction are responsible for bond formation during tabletting.

碾压中施加于颗粒增大的力和机理也用于压片的粘合成型。

The Board of the binders with paperboard adhesive between a collection, this intermolecular bonding of itself is referred to as coacervate.

渗透到纸板的黏合同纸板表面的黏合间形成一个集合，这种粘合子间的粘合称为凝聚粘合。

This paper has predicted indirectly by means of measuring the equivalent viscosity of resorcin-formaldehyde resin liquor(thereinafter referred to as RF resin).

通过测量在线取样的间苯二酚-甲醛树脂(以下简称RF树脂)溶液的当量粘度,来间接判断RF树脂的粘合性能。

Benzylic ether phenolic resin is one of the main components of foundry polyurethane binder; its structure and preparation condition determine the performances of polyurethane binder.

苯醚型酚醛树脂是铸造用聚氨酯粘合的主要成份之一,它的结构及合成工艺条件决定了该类粘合性能。

In the compression moulding technology, preheat and prepressing procedures are added to improve the flowability of the bond and physical and mechanical properties of the product.

在压缩模塑工艺中，增加预热、预压工序，提高粘合的流动性和产品的物理机性能。

When container with an inner aluminum-foil cover passes inductorium, heat will be immediately generated and makes the aluminum-foil layer stick tightly to the bottle mouth to avoid air leakage.

当装有铝箔内盖的容器经过感应圈时，即产生涡流瞬时发热，使铝箔面与瓶口紧密地粘合，达到气密封口的目的。

The composition and syntheses of a newly developed specific binding agent for cellulated paperboard and the influence of components of binding agent on adhesive power and drying speed are presented.

对蜂窝纸板专用粘合在合成路线,工艺配方等方面进行了讨论,并对该种粘合的组对其在粘度和干燥速度等方面的影响进行了析。

In order to overcome the disadvantage of low rubfastness of conventional pigment dyeing , a new type covering pigment with ultramicro azo dye as core and acrylate adhesive as shell was presented.

为克服常规涂料染色摩擦牢度低的弊病,作者提出采用以超微偶氮颜料为核,以丙烯酸酯类粘合为壳的新型颜料包覆体染色新的探索途径。

He joined two blocks of wood with glue.

他用胶水把两块木头粘起来。

That is a padhesive with the powder Diecty,Compress tablets and replenisher,Disinteante,adhesive of the capsula.

本品主要用作药物固体制剂，全粉末直接压片干燥粘剂，胶囊填充剂,崩解剂，湿法造粒粘剂和着色延展剂。

Using self-prepared sodium naphthalide solution,PTFE micropore membrane was modified to improve its wetness and adhesiveness.

用自制钠—萘处理液,改性聚四氟乙烯(PTFE)微孔,改善面润湿性和粘性。

B-the layers of wood together with glue.

用乳胶把一层层木板粘起来。

All perpends are to be strictly true and square and the whole properly bonded together.

所有直角处必须精确和方正，且整体要粘妥当。

Chlorhydrin rubber properties of physical and chemical. process technology. adhesivenessand use in cold reducting machines were mainly introduced.

主要介绍了氯醇橡胶机性能、工艺性能、粘性能及在制冷压缩机密封中应用。

The same forces and mechanisms responsible for size enlargement in roller compaction are responsible for bond formation during tabletting.

碾压中施加于颗粒增大力和机理也用于压片粘成型。

The Board of the binders with paperboard adhesive between a collection, this intermolecular bonding of itself is referred to as coacervate.

渗透到纸板剂同纸板面剂间形成一个集，这种粘本身分子间粘称为凝聚粘。

This paper has predicted indirectly by means of measuring the equivalent viscosity of resorcin-formaldehyde resin liquor(thereinafter referred to as RF resin).

通过测量在线取样间苯二酚-甲醛树脂(以下简称RF树脂)溶液当量粘度,来间接判断RF树脂粘性能。

Benzylic ether phenolic resin is one of the main components of foundry polyurethane binder; its structure and preparation condition determine the performances of polyurethane binder.

苯醚型酚醛树脂是铸造用聚氨酯粘剂主要成份之一,它结构及成工艺条件决定了该类粘剂性能。

In the compression moulding technology, preheat and prepressing procedures are added to improve the flowability of the bond and physical and mechanical properties of the product.

在压缩模塑工艺中，增加预热、预压工序，提高粘剂流动性和产品物理机性能。

When container with an inner aluminum-foil cover passes inductorium, heat will be immediately generated and makes the aluminum-foil layer stick tightly to the bottle mouth to avoid air leakage.

当装有铝箔内盖容器经过感应圈时，即产生涡流瞬时发热，使铝箔面与瓶口紧密地粘，达到气密封口目。

The composition and syntheses of a newly developed specific binding agent for cellulated paperboard and the influence of components of binding agent on adhesive power and drying speed are presented.

对蜂窝纸板专用粘剂在成路线,工艺配方等方面进行了讨论,并对该种粘剂组分对其在粘度和干燥速度等方面影响进行了分析。

In order to overcome the disadvantage of low rubfastness of conventional pigment dyeing , a new type covering pigment with ultramicro azo dye as core and acrylate adhesive as shell was presented.

为克服常规涂料染色摩擦牢度低弊病,作者提出采用以超微偶氮颜料为核,以丙烯酸酯类粘剂为壳新型颜料包覆体染色新探索途径。

He joined two blocks of wood with glue.

他用胶水把两块木头粘合起来。

That is a padhesive with the powder Diecty,Compress tablets and replenisher,Disinteante,adhesive of the capsula.

本品主要用作药物固体制剂，全粉末直接压片的干燥粘合剂，胶囊填充剂,崩解剂，湿法造粒粘合剂和着色的延展剂。

Using self-prepared sodium naphthalide solution,PTFE micropore membrane was modified to improve its wetness and adhesiveness.

用自制的钠—萘处理液,改性四氟乙烯(PTFE)微孔膜,改善薄膜表面的润湿性和粘合性。

B-the layers of wood together with glue.

用乳胶把一层层木板粘合起来。

All perpends are to be strictly true and square and the whole properly bonded together.

所有直角处必须精确和方正，且整体要粘合妥当。

Chlorhydrin rubber properties of physical and chemical. process technology. adhesivenessand use in cold reducting machines were mainly introduced.

主要介绍了氯醇橡胶的机性能、工艺性能、粘合性能及在制冷压缩机密封中的应用。

The same forces and mechanisms responsible for size enlargement in roller compaction are responsible for bond formation during tabletting.

碾压中施加于颗粒增大的力和机理也用于压片的粘合成型。

The Board of the binders with paperboard adhesive between a collection, this intermolecular bonding of itself is referred to as coacervate.

渗透到纸板的黏合剂同纸板表面的黏合剂间形成一个集合，这种粘合本身分子间的粘合称为凝粘合。

This paper has predicted indirectly by means of measuring the equivalent viscosity of resorcin-formaldehyde resin liquor(thereinafter referred to as RF resin).

通过测量在线取样的间苯二酚-甲醛树脂(以下简称RF树脂)溶液的当量粘度,来间接判断RF树脂的粘合性能。

Benzylic ether phenolic resin is one of the main components of foundry polyurethane binder; its structure and preparation condition determine the performances of polyurethane binder.

苯醚型酚醛树脂是铸造用粘合剂的主要成份之一,它的结构及合成工艺条件决定了该类粘合剂性能。

In the compression moulding technology, preheat and prepressing procedures are added to improve the flowability of the bond and physical and mechanical properties of the product.

在压缩模塑工艺中，增加预热、预压工序，提高粘合剂的流动性和产品的物理机性能。

When container with an inner aluminum-foil cover passes inductorium, heat will be immediately generated and makes the aluminum-foil layer stick tightly to the bottle mouth to avoid air leakage.

当装有铝箔内盖的容器经过感应圈时，即产生涡流瞬时发热，使铝箔面与瓶口紧密地粘合，达到气密封口的目的。

The composition and syntheses of a newly developed specific binding agent for cellulated paperboard and the influence of components of binding agent on adhesive power and drying speed are presented.

对蜂窝纸板专用粘合剂在合成路线,工艺配方等方面进行了讨论,并对该种粘合剂的组分对其在粘度和干燥速度等方面的影响进行了分析。

In order to overcome the disadvantage of low rubfastness of conventional pigment dyeing , a new type covering pigment with ultramicro azo dye as core and acrylate adhesive as shell was presented.

为克服常规涂料染色摩擦牢度低的弊病,作者提出采用以超微偶氮颜料为核,以丙烯酸类粘合剂为壳的新型颜料包覆体染色新的探索途径。