Portable Attritor mainly applies to the grinding treatment for the edge and part of the ground.

手提式研磨机，主要用于地面边角部位及局部地面研磨处理。

The freshly abraded specimen must then be washed in industrial spirit and Analar acetone.

然后，研磨好的新鲜试样必须在业精及纯丙酮中洗涤。

Nanograde sericite can be produced through the processes used in this study.

研磨后主要污染物为铁及铬，次要污染物为钛及镍。

P154 Multifunctional Ground Attritor applies to mattess and epoxy putty grinding and ground cleaning and wax-polishing.

P154型多功能地面研磨机,可以用于混凝土地面的打磨,环氧腻子层打磨及地面清洗打腊等。

Grinding paper with self bonding nappa base (for fixinf on cloth ) with grain P40 up to P100.

研磨的编织abrasive (sand) complect:1. 以寛115毫米的氯丁(二烯)橡胶为底的织物粘贴在上.Cloth 2.P40Z至P100的纸粘贴再皮革上.

"The simplest stonework is rubBle, roughly Broken stones Bound in mortar. Ashlar work consists of regularly cut Blocks with squared edges."

最简单的石料加品是粗石,在研磨机中粗略地破碎的石头。方石加品是由整齐地切割出方形边缘之石块所组成。

It s also used as a component for the fabrication fiber, and an creodont for the removal of exposed lead circurt board.

在金属加业中用来制所需的熔剂、金属的表面处理、制铝钛硼合金，和研磨盘的成分，以此降低操温度，还用棉花和人造纤维的阻燃剂及印刷电路中清除露出铅的侵蚀液。

Using solvent discharging valve gear in the small mill barrel can make no material draffy remain in the barrel consequently reduce the waste.

体积较小的研磨内桶结合泻溶剂阀，使桶内几乎没有残留物料，减少浪费，对于中小订单的客户，更有经济价值，满足更多客户的需求。

The deep formation has a high degree of hardness and abrasivity;the bit type selection is difficult and the ROP is low especially under the high density mud.

深部井段地层的硬度高、研磨性强，钻头选型困难，特别是在高密度条件下机械钻速低。

During their four seasons in Range Creek, the teams had plotted the GPS coordinates of every site they'd found and recorded the location of every potsherd, arrowhead, and metate.

对于牧溪谷的每个季节，该小组都已在每个地方设定了GPS，他们记录每一个有考古价值的陶片，箭头和研磨石被发现的体位置。

Portable Attritor mainly applies to the grinding treatment for the edge and part of the ground.

手提式研磨机，主要用边角部位及局部研磨处理。

The freshly abraded specimen must then be washed in industrial spirit and Analar acetone.

然后，研磨好的新鲜试样必须在工业酒精及纯丙酮中洗涤。

Nanograde sericite can be produced through the processes used in this study.

研磨后主要污染物为铁及铬，次要污染物为钛及镍。

P154 Multifunctional Ground Attritor applies to mattess and epoxy putty grinding and ground cleaning and wax-polishing.

P154型多功能研磨机,可以用混凝土的打磨,环氧腻子层打磨及清洗打腊等。

Grinding paper with self bonding nappa base (for fixinf on cloth ) with grain P40 up to P100.

研磨的编织abrasive (sand) complect:1. 以寛115毫米的氯丁(二烯)橡胶为底的织物粘贴在工上.Cloth 2.P40Z至P100的砂纸粘贴再皮革上.

"The simplest stonework is rubBle, roughly Broken stones Bound in mortar. Ashlar work consists of regularly cut Blocks with squared edges."

最简单的石料加工品是粗石,在研磨机中粗略破碎的石头。方石加工品是由整齐切割出方形边缘之石块所组成。

It s also used as a component for the fabrication fiber, and an creodont for the removal of exposed lead circurt board.

在金属加工工业中用来制作所需的熔、金属的表处理、制铝钛硼合金，作砂轮和研磨盘的成分，以此降低操作温度，还用作棉花和人造纤维的及印刷电路中清除露出铅的侵蚀液。

Using solvent discharging valve gear in the small mill barrel can make no material draffy remain in the barrel consequently reduce the waste.

体积较小的研磨内桶结合泻溶阀，使桶内几乎没有残留物料，减少浪费，对中小订单的客户，更有经济价值，满足更多客户的需求。

The deep formation has a high degree of hardness and abrasivity;the bit type selection is difficult and the ROP is low especially under the high density mud.

深部井段层的硬度高、研磨性强，钻头选型困难，特别是在高密度条件下机械钻速低。

During their four seasons in Range Creek, the teams had plotted the GPS coordinates of every site they'd found and recorded the location of every potsherd, arrowhead, and metate.

对牧溪谷的每个季节，该小组都已在每个方设定了GPS，他们记录每一个有考古价值的陶片，箭头和研磨石被发现的体位置。

Portable Attritor mainly applies to the grinding treatment for the edge and part of the ground.

手提式研磨机，主要用于边角部位局部研磨处理。

The freshly abraded specimen must then be washed in industrial spirit and Analar acetone.

然后，研磨好的新鲜试样必须在工业酒精纯丙酮中洗涤。

Nanograde sericite can be produced through the processes used in this study.

研磨后主要污染物为铁铬，次要污染物为钛镍。

P154 Multifunctional Ground Attritor applies to mattess and epoxy putty grinding and ground cleaning and wax-polishing.

P154型多功能研磨机,可以用于混凝土的打磨,环氧腻子层打磨清洗打腊等。

Grinding paper with self bonding nappa base (for fixinf on cloth ) with grain P40 up to P100.

研磨的编织abrasive (sand) complect:1. 以寛115毫米的氯丁(二烯)橡胶为底的织物粘贴在工上.Cloth 2.P40Z至P100的砂纸粘贴再皮革上.

"The simplest stonework is rubBle, roughly Broken stones Bound in mortar. Ashlar work consists of regularly cut Blocks with squared edges."

最简单的石料加工品是粗石,在研磨机中粗略的石头。方石加工品是由整齐切割出方形边缘之石块所组成。

It s also used as a component for the fabrication fiber, and an creodont for the removal of exposed lead circurt board.

在金属加工工业中用来制作所需的熔剂、金属的表处理、制铝钛硼合金，作砂轮和研磨盘的成分，以此降低操作温度，还用作棉花和人造纤维的阻燃剂印刷电路中清除露出铅的侵蚀液。

Using solvent discharging valve gear in the small mill barrel can make no material draffy remain in the barrel consequently reduce the waste.

体积较小的研磨内桶结合泻溶剂阀，使桶内几乎没有残留物料，减少浪费，对于中小订单的客户，更有经济价值，满足更多客户的需求。

The deep formation has a high degree of hardness and abrasivity;the bit type selection is difficult and the ROP is low especially under the high density mud.

深部井段层的硬度高、研磨性强，钻头选型困难，特别是在高密度条件下机械钻速低。

During their four seasons in Range Creek, the teams had plotted the GPS coordinates of every site they'd found and recorded the location of every potsherd, arrowhead, and metate.

对于牧溪谷的每个季节，该小组都已在每个方设定了GPS，他们记录每一个有考古价值的陶片，箭头和研磨石被发现的体位置。

Portable Attritor mainly applies to the grinding treatment for the edge and part of the ground.

手提式研磨机，主要用于地面边角部位及局部地面研磨处理。

The freshly abraded specimen must then be washed in industrial spirit and Analar acetone.

然后，研磨好的新鲜试样必须在业酒精及纯丙酮中洗涤。

Nanograde sericite can be produced through the processes used in this study.

研磨后主要污染物为铁及铬，次要污染物为钛及镍。

P154 Multifunctional Ground Attritor applies to mattess and epoxy putty grinding and ground cleaning and wax-polishing.

P154型多功能地面研磨机,可以用于混凝土地面的打磨,子层打磨及地面清洗打腊等。

Grinding paper with self bonding nappa base (for fixinf on cloth ) with grain P40 up to P100.

研磨的编织abrasive (sand) complect:1. 以寛115毫米的氯丁(二烯)橡胶为底的织物粘贴在上.Cloth 2.P40Z至P100的砂纸粘贴再皮革上.

"The simplest stonework is rubBle, roughly Broken stones Bound in mortar. Ashlar work consists of regularly cut Blocks with squared edges."

最简单的料品是粗,在研磨机中粗略地破碎的头。方品是由整齐地切割出方形边缘之块所组成。

It s also used as a component for the fabrication fiber, and an creodont for the removal of exposed lead circurt board.

在金属业中用来制作所需的熔剂、金属的表面处理、制铝钛硼合金，作砂轮和研磨盘的成分，以此降低操作温度，还用作棉花和人造纤维的阻燃剂及印刷电路中清除露出铅的侵蚀液。

Using solvent discharging valve gear in the small mill barrel can make no material draffy remain in the barrel consequently reduce the waste.

体积较小的研磨内桶结合泻溶剂阀，使桶内几乎没有残留物料，减少浪费，对于中小订单的客户，更有经济价值，满足更多客户的需求。

The deep formation has a high degree of hardness and abrasivity;the bit type selection is difficult and the ROP is low especially under the high density mud.

深部井段地层的硬度高、研磨性强，钻头选型困难，特别是在高密度条件下机械钻速低。

During their four seasons in Range Creek, the teams had plotted the GPS coordinates of every site they'd found and recorded the location of every potsherd, arrowhead, and metate.

对于牧溪谷的每个季节，该小组都已在每个地方设定了GPS，他们记录每一个有考古价值的陶片，箭头和研磨被发现的体位置。

Portable Attritor mainly applies to the grinding treatment for the edge and part of the ground.

手提式研磨机，主要用于地面边角部位及局部地面研磨处理。

The freshly abraded specimen must then be washed in industrial spirit and Analar acetone.

然后，研磨好的新鲜试样必须在工业酒精及纯丙酮中洗涤。

Nanograde sericite can be produced through the processes used in this study.

研磨后主要污染为铁及铬，次要污染为钛及镍。

P154 Multifunctional Ground Attritor applies to mattess and epoxy putty grinding and ground cleaning and wax-polishing.

P154型多功能地面研磨机,可以用于混凝土地面的打磨,环氧腻子层打磨及地面清洗打腊等。

Grinding paper with self bonding nappa base (for fixinf on cloth ) with grain P40 up to P100.

研磨的编abrasive (sand) complect:1. 以寛115毫米的氯丁(二烯)橡胶为底的贴在工上.Cloth 2.P40Z至P100的贴再皮革上.

"The simplest stonework is rubBle, roughly Broken stones Bound in mortar. Ashlar work consists of regularly cut Blocks with squared edges."

最简单的石料加工品是粗石,在研磨机中粗略地破碎的石头。方石加工品是由整齐地切割出方形边缘之石块所组成。

It s also used as a component for the fabrication fiber, and an creodont for the removal of exposed lead circurt board.

在金属加工工业中用来制作所需的熔剂、金属的表面处理、制铝钛硼合金，作轮和研磨盘的成分，以此降低操作温度，还用作棉花和人造纤维的阻燃剂及印刷电路中清除露出铅的侵蚀液。

Using solvent discharging valve gear in the small mill barrel can make no material draffy remain in the barrel consequently reduce the waste.

体积较小的研磨内桶结合泻溶剂阀，使桶内几乎没有残留料，减少浪费，对于中小订单的客户，更有经济价值，满足更多客户的需求。

The deep formation has a high degree of hardness and abrasivity;the bit type selection is difficult and the ROP is low especially under the high density mud.

深部井段地层的硬度高、研磨性强，钻头选型困难，特别是在高密度条件下机械钻速低。

During their four seasons in Range Creek, the teams had plotted the GPS coordinates of every site they'd found and recorded the location of every potsherd, arrowhead, and metate.

对于牧溪谷的每个季节，该小组都已在每个地方设定了GPS，他们记录每一个有考古价值的陶片，箭头和研磨石被发现的体位置。

Portable Attritor mainly applies to the grinding treatment for the edge and part of the ground.

手提式机，主要用于地面边角部位及局部地面处理。

The freshly abraded specimen must then be washed in industrial spirit and Analar acetone.

然后，好的新鲜试在工业酒精及纯丙酮中洗涤。

Nanograde sericite can be produced through the processes used in this study.

后主要污染物为铁及铬，次要污染物为钛及镍。

P154 Multifunctional Ground Attritor applies to mattess and epoxy putty grinding and ground cleaning and wax-polishing.

P154型多功能地面机,可以用于混凝土地面的打,环氧腻子层打及地面清洗打腊等。

Grinding paper with self bonding nappa base (for fixinf on cloth ) with grain P40 up to P100.

的编织abrasive (sand) complect:1. 以寛115毫米的氯丁(二烯)橡胶为底的织物粘贴在工上.Cloth 2.P40Z至P100的砂纸粘贴再皮革上.

"The simplest stonework is rubBle, roughly Broken stones Bound in mortar. Ashlar work consists of regularly cut Blocks with squared edges."

最简单的石料加工品是粗石,在机中粗略地破碎的石头。方石加工品是由整齐地切割出方形边缘之石块所组成。

It s also used as a component for the fabrication fiber, and an creodont for the removal of exposed lead circurt board.

在金属加工工业中用来制作所需的熔剂、金属的表面处理、制铝钛硼合金，作砂轮和的成分，以此降低操作温度，还用作棉花和人造纤维的阻燃剂及印刷电路中清除露出铅的侵蚀液。

Using solvent discharging valve gear in the small mill barrel can make no material draffy remain in the barrel consequently reduce the waste.

体积较小的内桶结合泻溶剂阀，使桶内几乎没有残留物料，减少浪费，对于中小订单的客户，更有经济价值，满足更多客户的需求。

The deep formation has a high degree of hardness and abrasivity;the bit type selection is difficult and the ROP is low especially under the high density mud.

深部井段地层的硬度高、性强，钻头选型困难，特别是在高密度条件下机械钻速低。

During their four seasons in Range Creek, the teams had plotted the GPS coordinates of every site they'd found and recorded the location of every potsherd, arrowhead, and metate.

对于牧溪谷的每个季节，该小组都已在每个地方设定了GPS，他们记录每一个有考古价值的陶片，箭头和石被发现的体位置。

Portable Attritor mainly applies to the grinding treatment for the edge and part of the ground.

手提式研机，主要用于地面边角部位及局部地面研处理。

The freshly abraded specimen must then be washed in industrial spirit and Analar acetone.

然后，研好新鲜试样必须在工业酒精及纯丙酮中洗涤。

Nanograde sericite can be produced through the processes used in this study.

研后主要污染物为铁及铬，次要污染物为钛及镍。

P154 Multifunctional Ground Attritor applies to mattess and epoxy putty grinding and ground cleaning and wax-polishing.

P154型多功能地面研机,可以用于混凝土地面,环氧腻子层及地面清洗腊等。

Grinding paper with self bonding nappa base (for fixinf on cloth ) with grain P40 up to P100.

研编织abrasive (sand) complect:1. 以寛115毫米氯丁(二烯)橡胶为底织物粘贴在工上.Cloth 2.P40Z至P100砂纸粘贴再皮革上.

"The simplest stonework is rubBle, roughly Broken stones Bound in mortar. Ashlar work consists of regularly cut Blocks with squared edges."

最简单石料加工粗石,在研机中粗略地破碎石头。方石加工整齐地切割出方形边缘之石块所组成。

It s also used as a component for the fabrication fiber, and an creodont for the removal of exposed lead circurt board.

在金属加工工业中用来制作所需熔剂、金属表面处理、制铝钛硼合金，作砂轮和研盘成分，以此降低操作温度，还用作棉花和人造纤维阻燃剂及印刷电路中清除露出铅侵蚀液。

Using solvent discharging valve gear in the small mill barrel can make no material draffy remain in the barrel consequently reduce the waste.

体积较小研内桶结合泻溶剂阀，使桶内几乎没有残留物料，减少浪费，对于中小订单客户，更有经济价值，满足更多客户需求。

The deep formation has a high degree of hardness and abrasivity;the bit type selection is difficult and the ROP is low especially under the high density mud.

深部井段地层硬度高、研性强，钻头选型困难，特别在高密度条件下机械钻速低。

During their four seasons in Range Creek, the teams had plotted the GPS coordinates of every site they'd found and recorded the location of every potsherd, arrowhead, and metate.

对于牧溪谷每个季节，该小组都已在每个地方设定了GPS，他们记录每一个有考古价值陶片，箭头和研石被发现体位置。

Portable Attritor mainly applies to the grinding treatment for the edge and part of the ground.

手提式研磨机，主要用于地面边角部位及局部地面研磨处。

The freshly abraded specimen must then be washed in industrial spirit and Analar acetone.

然后，研磨好的新鲜试样必须在工业酒精及纯丙涤。

Nanograde sericite can be produced through the processes used in this study.

研磨后主要污染物为铁及铬，次要污染物为钛及镍。

P154 Multifunctional Ground Attritor applies to mattess and epoxy putty grinding and ground cleaning and wax-polishing.

P154型多功能地面研磨机,可以用于混凝土地面的打磨,环氧腻子层打磨及地面清打腊等。

Grinding paper with self bonding nappa base (for fixinf on cloth ) with grain P40 up to P100.

研磨的编织abrasive (sand) complect:1. 以寛115毫米的氯丁(二烯)橡胶为底的织物粘贴在工上.Cloth 2.P40Z至P100的砂纸粘贴再皮革上.

"The simplest stonework is rubBle, roughly Broken stones Bound in mortar. Ashlar work consists of regularly cut Blocks with squared edges."

最简单的石料加工品是粗石,在研磨机粗略地破碎的石头。方石加工品是由整齐地切割出方形边缘之石块所组成。

It s also used as a component for the fabrication fiber, and an creodont for the removal of exposed lead circurt board.

在金属加工工业用来作所需的熔剂、金属的表面处、钛硼合金，作砂轮和研磨盘的成分，以此降低操作温度，还用作棉花和人造纤维的阻燃剂及印刷电路清除露出铅的侵蚀液。

Using solvent discharging valve gear in the small mill barrel can make no material draffy remain in the barrel consequently reduce the waste.

体积较小的研磨内桶结合泻溶剂阀，使桶内几乎没有残留物料，减少浪费，对于小订单的客户，更有经济价值，满足更多客户的需求。

The deep formation has a high degree of hardness and abrasivity;the bit type selection is difficult and the ROP is low especially under the high density mud.

深部井段地层的硬度高、研磨性强，钻头选型困难，特别是在高密度条件下机械钻速低。

During their four seasons in Range Creek, the teams had plotted the GPS coordinates of every site they'd found and recorded the location of every potsherd, arrowhead, and metate.

对于牧溪谷的每个季节，该小组都已在每个地方设定了GPS，他们记录每一个有考古价值的陶片，箭头和研磨石被发现的体位置。

Portable Attritor mainly applies to the grinding treatment for the edge and part of the ground.

手提式研磨机，主要用于地面边角部位及局部地面研磨处理。

The freshly abraded specimen must then be washed in industrial spirit and Analar acetone.

然后，研磨好新鲜试样必须在工业酒精及纯丙酮中洗涤。

Nanograde sericite can be produced through the processes used in this study.

研磨后主要污染物为铁及铬，次要污染物为钛及镍。

P154 Multifunctional Ground Attritor applies to mattess and epoxy putty grinding and ground cleaning and wax-polishing.

P154型多功能地面研磨机,可以用于混凝土地面打磨,环氧腻子层打磨及地面清洗打腊等。

Grinding paper with self bonding nappa base (for fixinf on cloth ) with grain P40 up to P100.

研磨编织abrasive (sand) complect:1. 以寛115毫米氯丁(二烯)橡胶为底织物粘贴在工上.Cloth 2.P40Z至P100砂纸粘贴再皮革上.

"The simplest stonework is rubBle, roughly Broken stones Bound in mortar. Ashlar work consists of regularly cut Blocks with squared edges."

最简单石料加工品是粗石,在研磨机中粗略地破碎石头。方石加工品是由整齐地切割出方形边缘之石块所组成。

It s also used as a component for the fabrication fiber, and an creodont for the removal of exposed lead circurt board.

在金属加工工业中用来制作所需熔剂、金属表面处理、制铝钛硼合金，作砂轮和研磨盘成分，以此降低操作温度，还用作棉花和人造纤维阻燃剂及印刷电路中清除露出铅液。

Using solvent discharging valve gear in the small mill barrel can make no material draffy remain in the barrel consequently reduce the waste.

体积较小研磨内桶结合泻溶剂阀，使桶内几乎没有残留物料，减少浪费，对于中小订单客户，更有经济价值，满足更多客户需求。

The deep formation has a high degree of hardness and abrasivity;the bit type selection is difficult and the ROP is low especially under the high density mud.

深部井段地层硬度高、研磨性强，钻头选型困难，特别是在高密度条件下机械钻速低。

During their four seasons in Range Creek, the teams had plotted the GPS coordinates of every site they'd found and recorded the location of every potsherd, arrowhead, and metate.

对于牧溪谷每个季节，该小组都已在每个地方设定了GPS，他们记录每一个有考古价值陶片，箭头和研磨石被发现体位置。