Main products are graphite block, graphite powder, kryptol, electrode, anode mud, protection residue etc.

公司主要生产块、粉、碳棒、电极、阳极糊、保护渣等。

In the article, the process conditions of wet surface modification of aphanitic graphite are studied.

选用不同的偶联剂对隐晶质粉进行面化学改性。

Carbon fiber has turbostratic graphite structure with eleclroconductive and diathermanous properties.

碳纤维属于乱结构,具有导电、导热性能。

Tartrate solution and zirconyl chloride were used as the matrix modifier for coating graphite tube.

采用酒酸-锆复合溶液作基体改进剂，锆涂热解管为原子化器。

It is proved that preduction of high-carbon graphite by chloridizing roast is better than by alcali.

指出氯化焙烧法生产碳较碱法为优。

The purpose of this paper is to study the radar absorbing effect of foamglass with graphite as vesicant.

本文的目的是研究作发泡剂的泡沫玻璃的微波吸收特性。

Several amorphic carbon films with different thickness were deposited on single crystal silicon by means of pulse laser ablating graphet target at room temprature.

用激光烧蚀靶方法在单晶硅面沉积了不同厚度的非晶碳膜。

The relationship between basicity of graphitiferous slag and microstructurcs of both slag and weld metal arc investigated for the same electrode with cast iron.

本文通过计算型熔渣碱度,研究了钢芯同质铸铁焊条熔渣的碱度与熔渣微观结构和焊缝组织的关系。

The reason for the fail of carbon nitride synthesis was analysed and relevant graphitoid carbon nitride and unformed carbon nitrides were introduced in the article.

分析了妨碍碳氮化物合成成功的原因,对相关的类的碳氮化合物和无定型的碳氮化合物作了介绍。

The result indicated that transformation of perlite was accelerated and the quantities of ferrolites was increased under the function of impulse electric field at second stage graphitization.

进而分析了脉冲电场作用下基体中晶核的数量增加,有效地缩短了珠光体分解时碳原子的扩散距离,从而加速了第二阶段化过程中珠光体的转变。

Main products are graphite block, graphite powder, kryptol, electrode, anode mud, protection residue etc.

公司主要墨块、墨粉、棒、电极、阳极糊、保护渣等。

In the article, the process conditions of wet surface modification of aphanitic graphite are studied.

选用不同的偶联剂对隐晶质墨粉进行表面化学改性。

Carbon fiber has turbostratic graphite structure with eleclroconductive and diathermanous properties.

纤维属于乱层墨结构,具有导电、导热性能。

Tartrate solution and zirconyl chloride were used as the matrix modifier for coating graphite tube.

采用酒酸-锆复合溶液作基体改进剂，锆涂层热解墨管为原子化器。

It is proved that preduction of high-carbon graphite by chloridizing roast is better than by alcali.

指出氯化焙烧法墨较碱法为优。

The purpose of this paper is to study the radar absorbing effect of foamglass with graphite as vesicant.

本文的目的是研究墨作发泡剂的泡沫玻璃的微波吸收特性。

Several amorphic carbon films with different thickness were deposited on single crystal silicon by means of pulse laser ablating graphet target at room temprature.

用激光烧蚀墨靶方法在单晶硅衬底表面沉积了不同厚度的非晶膜。

The relationship between basicity of graphitiferous slag and microstructurcs of both slag and weld metal arc investigated for the same electrode with cast iron.

本文通过计算墨型熔渣碱度,研究了钢芯同质铸铁焊条熔渣的碱度与熔渣微观结构和焊缝组织的关系。

The reason for the fail of carbon nitride synthesis was analysed and relevant graphitoid carbon nitride and unformed carbon nitrides were introduced in the article.

分析了妨碍氮化物合成成功的原因,对相关的类墨的氮化合物和无定型的氮化合物作了介绍。

The result indicated that transformation of perlite was accelerated and the quantities of ferrolites was increased under the function of impulse electric field at second stage graphitization.

进而分析了脉冲电场作用下基体中墨晶核的数量增加,有效地缩短了珠光体分解时原子的扩散距离,从而加速了第二阶段墨化过程中珠光体的转变。

Main products are graphite block, graphite powder, kryptol, electrode, anode mud, protection residue etc.

公司主要生产石墨块、石墨粉、碳棒、电极、阳极糊、保护渣等。

In the article, the process conditions of wet surface modification of aphanitic graphite are studied.

选不同的偶联剂对隐晶质石墨粉进行表面化学改性。

Carbon fiber has turbostratic graphite structure with eleclroconductive and diathermanous properties.

碳纤维属于乱层石墨结构,具有导电、导热性能。

Tartrate solution and zirconyl chloride were used as the matrix modifier for coating graphite tube.

石酸-锆复合溶液作基体改进剂，锆涂层热解石墨管为原子化器。

It is proved that preduction of high-carbon graphite by chloridizing roast is better than by alcali.

指出氯化焙法生产碳石墨较碱法为优。

The purpose of this paper is to study the radar absorbing effect of foamglass with graphite as vesicant.

本文的目的是研究石墨作发泡剂的泡沫玻璃的微波吸收特性。

Several amorphic carbon films with different thickness were deposited on single crystal silicon by means of pulse laser ablating graphet target at room temprature.

蚀石墨靶方法在单晶硅衬底表面沉积了不同厚度的非晶碳膜。

The relationship between basicity of graphitiferous slag and microstructurcs of both slag and weld metal arc investigated for the same electrode with cast iron.

本文通过计算石墨型熔渣碱度,研究了钢芯同质铸铁焊条熔渣的碱度与熔渣微观结构和焊缝组织的关系。

The reason for the fail of carbon nitride synthesis was analysed and relevant graphitoid carbon nitride and unformed carbon nitrides were introduced in the article.

分析了妨碍碳氮化物合成成功的原因,对相关的类石墨的碳氮化合物和无定型的碳氮化合物作了介绍。

The result indicated that transformation of perlite was accelerated and the quantities of ferrolites was increased under the function of impulse electric field at second stage graphitization.

进而分析了脉冲电场作下基体中石墨晶核的数量增加,有效地缩短了珠体分解时碳原子的扩散距离,从而加速了第二阶段石墨化过程中珠体的转变。

Main products are graphite block, graphite powder, kryptol, electrode, anode mud, protection residue etc.

公司主要生产石块、石、棒、电极、阳极糊、保护渣等。

In the article, the process conditions of wet surface modification of aphanitic graphite are studied.

选用不同偶联剂对隐晶质石进行表面化学改性。

Carbon fiber has turbostratic graphite structure with eleclroconductive and diathermanous properties.

纤维属于乱层石结构,具有导电、导热性能。

Tartrate solution and zirconyl chloride were used as the matrix modifier for coating graphite tube.

采用酒石酸-锆复合溶液作基体改进剂，锆涂层热解石管为原子化器。

It is proved that preduction of high-carbon graphite by chloridizing roast is better than by alcali.

指出氯化焙烧法生产石较法为优。

The purpose of this paper is to study the radar absorbing effect of foamglass with graphite as vesicant.

本文目是研究石作发泡剂泡沫玻璃微波吸收特性。

Several amorphic carbon films with different thickness were deposited on single crystal silicon by means of pulse laser ablating graphet target at room temprature.

用激光烧蚀石靶方法在单晶硅衬底表面沉积了不同厚非晶膜。

The relationship between basicity of graphitiferous slag and microstructurcs of both slag and weld metal arc investigated for the same electrode with cast iron.

本文通过计算石型熔渣,研究了钢芯同质铸铁焊条熔渣与熔渣微观结构和焊缝组织关系。

The reason for the fail of carbon nitride synthesis was analysed and relevant graphitoid carbon nitride and unformed carbon nitrides were introduced in the article.

分析了妨碍氮化物合成成功原因,对相关类石氮化合物和无定型氮化合物作了介绍。

The result indicated that transformation of perlite was accelerated and the quantities of ferrolites was increased under the function of impulse electric field at second stage graphitization.

进而分析了脉冲电场作用下基体中石晶核数量增加,有效地缩短了珠光体分解时原子扩散距离,从而加速了第二阶段石化过程中珠光体转变。

Main products are graphite block, graphite powder, kryptol, electrode, anode mud, protection residue etc.

公司主要生产石墨块、石墨粉、碳棒、电极、阳极糊、保护渣等。

In the article, the process conditions of wet surface modification of aphanitic graphite are studied.

选用不同的偶联剂对隐晶质石墨粉进行表面化学改性。

Carbon fiber has turbostratic graphite structure with eleclroconductive and diathermanous properties.

碳纤维属于乱层石墨结构,具有导电、导热性能。

Tartrate solution and zirconyl chloride were used as the matrix modifier for coating graphite tube.

采用酒石酸-锆复合溶液作基体改进剂，锆涂层热解石墨管为原子化器。

It is proved that preduction of high-carbon graphite by chloridizing roast is better than by alcali.

指出氯化焙烧法生产碳石墨较碱法为优。

The purpose of this paper is to study the radar absorbing effect of foamglass with graphite as vesicant.

本文的目的是研究石墨作发泡剂的泡沫玻璃的微波吸收特性。

Several amorphic carbon films with different thickness were deposited on single crystal silicon by means of pulse laser ablating graphet target at room temprature.

用激光烧蚀石墨靶方法在单晶硅衬底表面沉积不同厚度的非晶碳膜。

The relationship between basicity of graphitiferous slag and microstructurcs of both slag and weld metal arc investigated for the same electrode with cast iron.

本文通过计算石墨型熔渣碱度,研究钢芯同质铸铁焊条熔渣的碱度与熔渣微观结构和焊缝组织的关系。

The reason for the fail of carbon nitride synthesis was analysed and relevant graphitoid carbon nitride and unformed carbon nitrides were introduced in the article.

妨碍碳氮化物合成成功的原因,对相关的类石墨的碳氮化合物和无定型的碳氮化合物作介绍。

The result indicated that transformation of perlite was accelerated and the quantities of ferrolites was increased under the function of impulse electric field at second stage graphitization.

进而脉冲电场作用下基体中石墨晶核的数量增加,有效地缩短珠光体解时碳原子的扩散距离,从而加速第二阶段石墨化过程中珠光体的转变。

Main products are graphite block, graphite powder, kryptol, electrode, anode mud, protection residue etc.

公司主要生产石墨块、石墨、、电极、阳极糊、保护等。

In the article, the process conditions of wet surface modification of aphanitic graphite are studied.

选用不同偶联剂对隐晶质石墨进行表面化学改性。

Carbon fiber has turbostratic graphite structure with eleclroconductive and diathermanous properties.

纤维属于乱层石墨结构,具有导电、导热性能。

Tartrate solution and zirconyl chloride were used as the matrix modifier for coating graphite tube.

采用酒石酸-锆复合溶液作基体改进剂，锆涂层热解石墨管为原子化器。

It is proved that preduction of high-carbon graphite by chloridizing roast is better than by alcali.

指出氯化焙烧法生产石墨较法为优。

The purpose of this paper is to study the radar absorbing effect of foamglass with graphite as vesicant.

本文目是研究石墨作发泡剂泡沫玻璃微波吸收特性。

Several amorphic carbon films with different thickness were deposited on single crystal silicon by means of pulse laser ablating graphet target at room temprature.

用激光烧蚀石墨靶方法在单晶硅衬底表面沉积了不同厚度非晶膜。

The relationship between basicity of graphitiferous slag and microstructurcs of both slag and weld metal arc investigated for the same electrode with cast iron.

本文通过计算石墨型熔度,研究了钢芯同质铸铁焊条熔度与熔微观结构和焊缝组织关系。

The reason for the fail of carbon nitride synthesis was analysed and relevant graphitoid carbon nitride and unformed carbon nitrides were introduced in the article.

分析了妨碍氮化物合成成功原因,对相关类石墨氮化合物和无定型氮化合物作了介绍。

The result indicated that transformation of perlite was accelerated and the quantities of ferrolites was increased under the function of impulse electric field at second stage graphitization.

进而分析了脉冲电场作用下基体中石墨晶核数量增加,有效地缩短了珠光体分解时原子扩散距离,从而加速了第二阶段石墨化过程中珠光体转变。

Main products are graphite block, graphite powder, kryptol, electrode, anode mud, protection residue etc.

公司主要生产石墨块、石墨、、电极、阳极糊、保护等。

In the article, the process conditions of wet surface modification of aphanitic graphite are studied.

选用不同偶联剂对隐晶质石墨进行表面化学改性。

Carbon fiber has turbostratic graphite structure with eleclroconductive and diathermanous properties.

纤维属于乱层石墨结构,具有导电、导热性能。

Tartrate solution and zirconyl chloride were used as the matrix modifier for coating graphite tube.

采用酒石酸-锆复合溶液作基体改进剂，锆涂层热解石墨管为原子化器。

It is proved that preduction of high-carbon graphite by chloridizing roast is better than by alcali.

指出氯化焙烧法生产石墨较法为优。

The purpose of this paper is to study the radar absorbing effect of foamglass with graphite as vesicant.

本文目是研究石墨作发泡剂泡沫玻璃微波吸收特性。

Several amorphic carbon films with different thickness were deposited on single crystal silicon by means of pulse laser ablating graphet target at room temprature.

用激光烧蚀石墨靶方法在单晶硅衬底表面沉积了不同厚度非晶膜。

The relationship between basicity of graphitiferous slag and microstructurcs of both slag and weld metal arc investigated for the same electrode with cast iron.

本文通过计算石墨型熔度,研究了钢芯同质铸铁焊条熔度与熔微观结构和焊缝组织关系。

The reason for the fail of carbon nitride synthesis was analysed and relevant graphitoid carbon nitride and unformed carbon nitrides were introduced in the article.

分析了妨碍氮化物合成成功原因,对相关类石墨氮化合物和无定型氮化合物作了介绍。

The result indicated that transformation of perlite was accelerated and the quantities of ferrolites was increased under the function of impulse electric field at second stage graphitization.

进而分析了脉冲电场作用下基体中石墨晶核数量增加,有效地缩短了珠光体分解时原子扩散距离,从而加速了第二阶段石墨化过程中珠光体转变。

Main products are graphite block, graphite powder, kryptol, electrode, anode mud, protection residue etc.

公司主要生产石墨块、石墨粉、棒、电极、阳极糊、保护渣等。

In the article, the process conditions of wet surface modification of aphanitic graphite are studied.

选用的偶联剂对隐晶质石墨粉进行表面化学改性。

Carbon fiber has turbostratic graphite structure with eleclroconductive and diathermanous properties.

属于乱层石墨结构,具有导电、导热性能。

Tartrate solution and zirconyl chloride were used as the matrix modifier for coating graphite tube.

采用酒石酸-锆复合溶液作基体改进剂，锆涂层热解石墨管为原子化器。

It is proved that preduction of high-carbon graphite by chloridizing roast is better than by alcali.

指出氯化焙烧法生产石墨较碱法为优。

The purpose of this paper is to study the radar absorbing effect of foamglass with graphite as vesicant.

本文的目的是研究石墨作发泡剂的泡沫玻璃的微波吸收特性。

Several amorphic carbon films with different thickness were deposited on single crystal silicon by means of pulse laser ablating graphet target at room temprature.

用激光烧蚀石墨靶方法在单晶硅衬底表面沉积厚度的非晶膜。

The relationship between basicity of graphitiferous slag and microstructurcs of both slag and weld metal arc investigated for the same electrode with cast iron.

本文通过计算石墨型熔渣碱度,研究钢芯质铸铁焊条熔渣的碱度与熔渣微观结构和焊缝组织的关系。

The reason for the fail of carbon nitride synthesis was analysed and relevant graphitoid carbon nitride and unformed carbon nitrides were introduced in the article.

分析妨碍氮化物合成成功的原因,对相关的类石墨的氮化合物和无定型的氮化合物作介绍。

The result indicated that transformation of perlite was accelerated and the quantities of ferrolites was increased under the function of impulse electric field at second stage graphitization.

进而分析脉冲电场作用下基体中石墨晶核的数量增加,有效地缩短珠光体分解时原子的扩散距离,从而加速第二阶段石墨化过程中珠光体的转变。

Main products are graphite block, graphite powder, kryptol, electrode, anode mud, protection residue etc.

公司主要块、粉、棒、电极、阳极糊、保护渣等。

In the article, the process conditions of wet surface modification of aphanitic graphite are studied.

选用不同的偶联剂对隐晶质粉进行表面化学改性。

Carbon fiber has turbostratic graphite structure with eleclroconductive and diathermanous properties.

纤维属于乱层结构,具有导电、导热性能。

Tartrate solution and zirconyl chloride were used as the matrix modifier for coating graphite tube.

采用酒酸-锆复合溶液作基体改进剂，锆涂层热解管为原子化器。

It is proved that preduction of high-carbon graphite by chloridizing roast is better than by alcali.

指出氯化焙烧法较碱法为优。

The purpose of this paper is to study the radar absorbing effect of foamglass with graphite as vesicant.

本文的目的是研究作发泡剂的泡沫玻璃的微波吸收特性。

Several amorphic carbon films with different thickness were deposited on single crystal silicon by means of pulse laser ablating graphet target at room temprature.

用激光烧蚀靶方法在单晶硅衬底表面沉积了不同厚度的非晶膜。

The relationship between basicity of graphitiferous slag and microstructurcs of both slag and weld metal arc investigated for the same electrode with cast iron.

本文通过计算型熔渣碱度,研究了钢芯同质铸铁焊条熔渣的碱度与熔渣微观结构和焊缝组织的关系。

The reason for the fail of carbon nitride synthesis was analysed and relevant graphitoid carbon nitride and unformed carbon nitrides were introduced in the article.

分析了妨碍氮化物合成成功的原因,对相关的类的氮化合物和无定型的氮化合物作了介绍。

The result indicated that transformation of perlite was accelerated and the quantities of ferrolites was increased under the function of impulse electric field at second stage graphitization.

进而分析了脉冲电场作用下基体中晶核的数量增加,有效地缩短了珠光体分解时原子的扩散距离,从而加速了第二阶段化过程中珠光体的转变。