Ethyl lauryl alcohol respectively react with hydrobromic acid to product bromohydrocarbon,sulfuric acid for catalyst。

以正十二醇和氢溴为原料,浓硫的催化,生产溴十二烷。

Bromooctane was synthesized from industrial hydrobromic acid(48%) and n-octanol using concentrated sulfuric acid as catalyst.

以工业废氢溴(48%)为原料,浓硫存,正辛醇进行反应合成1-溴辛烷。

The design parameters of anodic protection coolers and the reason why to choose a prepump process are presented.

介绍阳极保护浓硫冷却的设计参数,选用前流程的原因,重点讨论冷却水路的设计方案。

By the carbonification degree in the concentrated sulphuric acid, the mineral wax, such as paraffin wax added can be determined.

根据蜂蜡的烃类浓硫被炭化，加入的石蜡等矿物蜡不被炭化来测定此类掺杂物。

Isopropenyl acetate was synthesized from ketene and acetone by direct esterification using strong acidic cation-exchange resin to substitute H2SO4 as catalyst.

以乙烯酮和丙酮为原料,用强性离子交换树脂代替浓硫作为催化剂,直接酯化合成乙酰丙酮的间体乙异丙烯酯。

Methods Certain amounts of and Zn were put into the wastewater to produce hydrogen (H2) and the H2 reacted with S2-to form H2S, and sulfuret was separated from the wastewater.

方法废水样加入一定量的浓硫和锌粒,生成H2,利用H2和S2-结合生成H2S,以分离硫化物。

Ethyl lauryl alcohol respectively react with hydrobromic acid to product bromohydrocarbon,sulfuric acid for catalyst。

以正十二醇酸为原,在浓硫酸的催化下,生产十二烷。

Bromooctane was synthesized from industrial hydrobromic acid(48%) and n-octanol using concentrated sulfuric acid as catalyst.

以工业废酸(48%)为原,在浓硫酸存在下,与正辛醇进行反应合成1-辛烷。

The design parameters of anodic protection coolers and the reason why to choose a prepump process are presented.

介绍阳极保护浓硫酸冷却的设计参数,选前流程的原因,重点讨论冷却水路的设计方案。

By the carbonification degree in the concentrated sulphuric acid, the mineral wax, such as paraffin wax added can be determined.

根据蜂蜡中的烃类在浓硫酸中可被炭化，加入的石蜡等矿物蜡不被炭化来测定此类掺杂物。

Isopropenyl acetate was synthesized from ketene and acetone by direct esterification using strong acidic cation-exchange resin to substitute H2SO4 as catalyst.

以乙烯酮丙酮为原,酸性离子交换树脂代替浓硫酸作为催化剂,直接酯化合成乙酰丙酮的中间体乙酸异丙烯酯。

Methods Certain amounts of and Zn were put into the wastewater to produce hydrogen (H2) and the H2 reacted with S2-to form H2S, and sulfuret was separated from the wastewater.

方法在废水样中加入一定量的浓硫酸锌粒,生成H2,利H2S2-结合生成H2S,以分离硫化物。

Ethyl lauryl alcohol respectively react with hydrobromic acid to product bromohydrocarbon,sulfuric acid for catalyst。

以正十二醇和氢溴酸为原料,在浓硫酸的催化下,生产溴十二。

Bromooctane was synthesized from industrial hydrobromic acid(48%) and n-octanol using concentrated sulfuric acid as catalyst.

以工业废氢溴酸(48%)为原料,在浓硫酸存在下,与正辛醇进行反应合成1-溴辛。

The design parameters of anodic protection coolers and the reason why to choose a prepump process are presented.

阳极保护浓硫酸冷却的设参数,选用前流程的原因,重点讨论冷却水路的设。

By the carbonification degree in the concentrated sulphuric acid, the mineral wax, such as paraffin wax added can be determined.

根据蜂蜡中的烃类在浓硫酸中可被炭化，加入的石蜡等矿物蜡不被炭化来测定此类掺杂物。

Isopropenyl acetate was synthesized from ketene and acetone by direct esterification using strong acidic cation-exchange resin to substitute H2SO4 as catalyst.

以乙烯酮和丙酮为原料,用强酸性离子交换树脂代替浓硫酸作为催化剂,直接酯化合成乙酰丙酮的中间体乙酸异丙烯酯。

Methods Certain amounts of and Zn were put into the wastewater to produce hydrogen (H2) and the H2 reacted with S2-to form H2S, and sulfuret was separated from the wastewater.

法在废水样中加入一定量的浓硫酸和锌粒,生成H2,利用H2和S2-结合生成H2S,以分离硫化物。

Ethyl lauryl alcohol respectively react with hydrobromic acid to product bromohydrocarbon,sulfuric acid for catalyst。

以正十二和氢溴酸为原料,浓硫酸的催化下,生产溴十二烷。

Bromooctane was synthesized from industrial hydrobromic acid(48%) and n-octanol using concentrated sulfuric acid as catalyst.

以工业废氢溴酸(48%)为原料,浓硫酸存下,与正辛反应合成1-溴辛烷。

The design parameters of anodic protection coolers and the reason why to choose a prepump process are presented.

介绍阳极保护浓硫酸冷却的设计参数,选用前流程的原因,重点讨论冷却水路的设计方案。

By the carbonification degree in the concentrated sulphuric acid, the mineral wax, such as paraffin wax added can be determined.

根据蜂蜡中的浓硫酸中可被炭化，加入的石蜡等矿物蜡不被炭化来测定此掺杂物。

Isopropenyl acetate was synthesized from ketene and acetone by direct esterification using strong acidic cation-exchange resin to substitute H2SO4 as catalyst.

以乙烯酮和丙酮为原料,用强酸性离子交换树脂代替浓硫酸作为催化剂,直接酯化合成乙酰丙酮的中间体乙酸异丙烯酯。

Methods Certain amounts of and Zn were put into the wastewater to produce hydrogen (H2) and the H2 reacted with S2-to form H2S, and sulfuret was separated from the wastewater.

方法废水样中加入一定量的浓硫酸和锌粒,生成H2,利用H2和S2-结合生成H2S,以分离硫化物。

Ethyl lauryl alcohol respectively react with hydrobromic acid to product bromohydrocarbon,sulfuric acid for catalyst。

正十二醇和氢溴酸为原料,在浓硫酸的催化下,生产溴十二烷。

Bromooctane was synthesized from industrial hydrobromic acid(48%) and n-octanol using concentrated sulfuric acid as catalyst.

业废氢溴酸(48%)为原料,在浓硫酸存在下,与正辛醇进行反应合成1-溴辛烷。

The design parameters of anodic protection coolers and the reason why to choose a prepump process are presented.

介绍阳极保护浓硫酸冷却的设计参数,选用前流程的原因,重点讨论冷却水路的设计方案。

By the carbonification degree in the concentrated sulphuric acid, the mineral wax, such as paraffin wax added can be determined.

根据蜂蜡中的烃类在浓硫酸中可化，加入的石蜡等矿物蜡化来测定此类掺杂物。

Isopropenyl acetate was synthesized from ketene and acetone by direct esterification using strong acidic cation-exchange resin to substitute H2SO4 as catalyst.

乙烯酮和丙酮为原料,用强酸性离子交换树脂代替浓硫酸作为催化剂,直接酯化合成乙酰丙酮的中间体乙酸异丙烯酯。

Methods Certain amounts of and Zn were put into the wastewater to produce hydrogen (H2) and the H2 reacted with S2-to form H2S, and sulfuret was separated from the wastewater.

方法在废水样中加入一定量的浓硫酸和锌粒,生成H2,利用H2和S2-结合生成H2S,分离硫化物。

Ethyl lauryl alcohol respectively react with hydrobromic acid to product bromohydrocarbon,sulfuric acid for catalyst。

以正十二醇和氢溴酸为原料,在酸的催化下,生产溴十二烷。

Bromooctane was synthesized from industrial hydrobromic acid(48%) and n-octanol using concentrated sulfuric acid as catalyst.

以工业废氢溴酸(48%)为原料,在酸存在下,与正辛醇进行反应合成1-溴辛烷。

The design parameters of anodic protection coolers and the reason why to choose a prepump process are presented.

介绍阳极保护酸冷却的设计参数,选用前流程的原因,重点讨论冷却水路的设计方案。

By the carbonification degree in the concentrated sulphuric acid, the mineral wax, such as paraffin wax added can be determined.

根据蜂蜡中的烃类在酸中可被炭化，加入的石蜡等矿物蜡不被炭化来测定此类掺杂物。

Isopropenyl acetate was synthesized from ketene and acetone by direct esterification using strong acidic cation-exchange resin to substitute H2SO4 as catalyst.

以乙烯酮和丙酮为原料,用强酸性离子交换树脂代酸作为催化剂,直接酯化合成乙酰丙酮的中间体乙酸异丙烯酯。

Methods Certain amounts of and Zn were put into the wastewater to produce hydrogen (H2) and the H2 reacted with S2-to form H2S, and sulfuret was separated from the wastewater.

方法在废水样中加入一定量的酸和锌粒,生成H2,利用H2和S2-结合生成H2S,以分离化物。

Ethyl lauryl alcohol respectively react with hydrobromic acid to product bromohydrocarbon,sulfuric acid for catalyst。

以正十二醇和氢溴酸为原料,在浓硫酸催化下,生产溴十二烷。

Bromooctane was synthesized from industrial hydrobromic acid(48%) and n-octanol using concentrated sulfuric acid as catalyst.

以工业废氢溴酸(48%)为原料,在浓硫酸存在下,与正辛醇应合成1-溴辛烷。

The design parameters of anodic protection coolers and the reason why to choose a prepump process are presented.

介绍阳极保护浓硫酸冷却设计参数,选用前流程原因,重点讨论冷却水路设计方案。

By the carbonification degree in the concentrated sulphuric acid, the mineral wax, such as paraffin wax added can be determined.

根据蜂蜡中在浓硫酸中可被炭化，加入石蜡等矿物蜡不被炭化来测定此掺杂物。

Isopropenyl acetate was synthesized from ketene and acetone by direct esterification using strong acidic cation-exchange resin to substitute H2SO4 as catalyst.

以乙烯酮和丙酮为原料,用强酸性离子交换树脂代替浓硫酸作为催化剂,直接酯化合成乙酰丙酮中间体乙酸异丙烯酯。

Methods Certain amounts of and Zn were put into the wastewater to produce hydrogen (H2) and the H2 reacted with S2-to form H2S, and sulfuret was separated from the wastewater.

方法在废水样中加入一定量浓硫酸和锌粒,生成H2,利用H2和S2-结合生成H2S,以分离硫化物。

Ethyl lauryl alcohol respectively react with hydrobromic acid to product bromohydrocarbon,sulfuric acid for catalyst。

以正十二醇和氢溴酸原料,在浓硫酸的化下,生产溴十二烷。

Bromooctane was synthesized from industrial hydrobromic acid(48%) and n-octanol using concentrated sulfuric acid as catalyst.

以工业废氢溴酸(48%)原料,在浓硫酸存在下,与正辛醇进行反应合成1-溴辛烷。

The design parameters of anodic protection coolers and the reason why to choose a prepump process are presented.

介绍阳极保护浓硫酸冷却的设计参数,选用前流程的原因,重点讨论冷却水路的设计方案。

By the carbonification degree in the concentrated sulphuric acid, the mineral wax, such as paraffin wax added can be determined.

根据蜂蜡中的烃类在浓硫酸中可被炭化，加入的石蜡等矿物蜡不被炭化来测定此类掺杂物。

Isopropenyl acetate was synthesized from ketene and acetone by direct esterification using strong acidic cation-exchange resin to substitute H2SO4 as catalyst.

以乙烯酮和丙酮原料,用强酸性离子交换树脂代替浓硫酸化剂,直接酯化合成乙酰丙酮的中间体乙酸异丙烯酯。

Methods Certain amounts of and Zn were put into the wastewater to produce hydrogen (H2) and the H2 reacted with S2-to form H2S, and sulfuret was separated from the wastewater.

方法在废水样中加入一定量的浓硫酸和锌粒,生成H2,利用H2和S2-结合生成H2S,以分离硫化物。

Ethyl lauryl alcohol respectively react with hydrobromic acid to product bromohydrocarbon,sulfuric acid for catalyst。

以正十二醇和氢溴酸为原料,酸的催下,生产溴十二烷。

Bromooctane was synthesized from industrial hydrobromic acid(48%) and n-octanol using concentrated sulfuric acid as catalyst.

以工业废氢溴酸(48%)为原料,酸存下,与正辛醇进行反应合成1-溴辛烷。

The design parameters of anodic protection coolers and the reason why to choose a prepump process are presented.

介绍阳极保护酸冷却的设计参数,选用前流程的原因,重点讨论冷却水路的设计方案。

By the carbonification degree in the concentrated sulphuric acid, the mineral wax, such as paraffin wax added can be determined.

根据蜂蜡中的烃类酸中可被炭，的石蜡等矿物蜡不被炭来测定此类掺杂物。

Isopropenyl acetate was synthesized from ketene and acetone by direct esterification using strong acidic cation-exchange resin to substitute H2SO4 as catalyst.

以乙烯酮和丙酮为原料,用强酸性离子交换树脂代替酸作为催剂,直接酯合成乙酰丙酮的中间体乙酸异丙烯酯。

Methods Certain amounts of and Zn were put into the wastewater to produce hydrogen (H2) and the H2 reacted with S2-to form H2S, and sulfuret was separated from the wastewater.

方法废水样中一定量的酸和锌粒,生成H2,利用H2和S2-结合生成H2S,以分离物。