The incorporation of air bubbles in the glass spoiled it.

玻璃含有气泡, 使它质量降低。

The water was bubbling gently in the pan.

水在锅里轻轻地冒着气泡。

After curing, the tire is without bubble and underfeeding and the tread pattern is clear.

固化后的轮胎花纹清晰,无气泡和缺料现象。

When wine is fermented, it gives off gas.

酒发酵时发出气泡。

All kinds of glass defect will occur during the melting production, such as airbladder, stria and concretiono.

玻璃在生产过程中，会产生各种各样的缺陷，比如:气泡、条纹和结石。这些缺陷都是在熔过程中发生的。

Research of the influences of Foam Expansion Ratio (FER) and the stability of foam to the cutterhead torque.

通过对试验结果的分析,得出气泡稳定性以及发泡倍率对刀盘扭矩的影响规律。

According to the causes,the surface defects can be divided into blister containing non-metallic inclusion,blister without non-metallic inclusion and “raindrop”,“gills”，“mountained”.

不含有非金属夹杂的气囊表面缺陷；由气泡产生的“雨点”状表面缺陷；“鱼鳞”状表面缺陷；“山水画”状表面缺陷。

Based on those experiments, a mathematic model of process of intumescence was established with the neglect of the transfer motion of the bubble.

在实验基础上，忽略气泡的，立了膨胀过程的数学模型。

CT scan performed at one week after treatment will show an area of necrosis, the cryolesion, which commonly has residual gas bubbles, not to be confused with infection.

术后一周的CT扫描显示坏疽部位和通常带有残余气泡的冷冻创口没有受到感染的影响。

The incorporation of air bubbles in the glass spoiled it.

玻璃含有, 使它质量降低。

The water was bubbling gently in the pan.

水在锅里轻轻地冒着。

After curing, the tire is without bubble and underfeeding and the tread pattern is clear.

化后的轮胎花纹清晰,无和缺料现象。

When wine is fermented, it gives off gas.

酒发酵时发出。

All kinds of glass defect will occur during the melting production, such as airbladder, stria and concretiono.

玻璃在生产过程中，会产生各种各样的缺陷，比如:、条纹和结石。这些缺陷都是在熔过程中发生的。

Research of the influences of Foam Expansion Ratio (FER) and the stability of foam to the cutterhead torque.

通过对试验结果的分析,得出稳定性以及发倍率对刀盘扭矩的影响规律。

According to the causes,the surface defects can be divided into blister containing non-metallic inclusion,blister without non-metallic inclusion and “raindrop”,“gills”，“mountained”.

不含有非金属夹杂的囊表面缺陷；由产生的“”表面缺陷；“鱼鳞”表面缺陷；“山水画”表面缺陷。

Based on those experiments, a mathematic model of process of intumescence was established with the neglect of the transfer motion of the bubble.

在实验基础上，忽略的迁移，建立了膨胀过程的数学模型。

CT scan performed at one week after treatment will show an area of necrosis, the cryolesion, which commonly has residual gas bubbles, not to be confused with infection.

术后一周的CT扫描显示坏疽部位和通常带有残余的冷冻创口没有受到感染的影响。

The incorporation of air bubbles in the glass spoiled it.

玻璃含有气, 使它质量降低。

The water was bubbling gently in the pan.

水在锅里轻轻地冒着气。

After curing, the tire is without bubble and underfeeding and the tread pattern is clear.

固化后轮胎花纹清晰,无气和缺料现象。

When wine is fermented, it gives off gas.

酒发酵时发出气。

All kinds of glass defect will occur during the melting production, such as airbladder, stria and concretiono.

玻璃在生产过程中，会产生各种各样缺陷，比如:气、条纹和结石。这些缺陷都是在熔过程中发生。

Research of the influences of Foam Expansion Ratio (FER) and the stability of foam to the cutterhead torque.

通过对试验结果分析,得出气稳定性以及发倍率对刀盘扭矩影响规律。

According to the causes,the surface defects can be divided into blister containing non-metallic inclusion,blister without non-metallic inclusion and “raindrop”,“gills”，“mountained”.

不含有非金属夹杂气囊表面缺陷；由气产生“雨点”状表面缺陷；“鱼鳞”状表面缺陷；“山水画”状表面缺陷。

Based on those experiments, a mathematic model of process of intumescence was established with the neglect of the transfer motion of the bubble.

在实验基础上，忽略气移，建立了膨胀过程数学模型。

CT scan performed at one week after treatment will show an area of necrosis, the cryolesion, which commonly has residual gas bubbles, not to be confused with infection.

术后一周CT扫描显示坏疽部位和通常带有残余气冷冻创口没有受到感染影响。

The incorporation of air bubbles in the glass spoiled it.

璃含有气泡, 使它质量降低。

The water was bubbling gently in the pan.

水在锅里轻轻地冒着气泡。

After curing, the tire is without bubble and underfeeding and the tread pattern is clear.

固化后的轮胎花纹清晰,无气泡和缺料现象。

When wine is fermented, it gives off gas.

酒发酵时发出气泡。

All kinds of glass defect will occur during the melting production, such as airbladder, stria and concretiono.

璃在生产过程中，会产生各种各样的缺陷，比如:气泡、条纹和结石。这些缺陷都是在熔过程中发生的。

Research of the influences of Foam Expansion Ratio (FER) and the stability of foam to the cutterhead torque.

通过对试结果的分析,得出气泡稳定性以及发泡倍率对刀盘扭矩的影响规律。

According to the causes,the surface defects can be divided into blister containing non-metallic inclusion,blister without non-metallic inclusion and “raindrop”,“gills”，“mountained”.

不含有非金属夹杂的气囊表面缺陷；由气泡产生的“雨点”状表面缺陷；“鱼鳞”状表面缺陷；“山水画”状表面缺陷。

Based on those experiments, a mathematic model of process of intumescence was established with the neglect of the transfer motion of the bubble.

在础上，忽略气泡的迁移，建立了膨胀过程的数学模型。

CT scan performed at one week after treatment will show an area of necrosis, the cryolesion, which commonly has residual gas bubbles, not to be confused with infection.

术后一周的CT扫描显示坏疽部位和通常带有残余气泡的冷冻创口没有受到感染的影响。

The incorporation of air bubbles in the glass spoiled it.

玻璃含有泡, 使它质量降低。

The water was bubbling gently in the pan.

水在锅里轻轻地冒着泡。

After curing, the tire is without bubble and underfeeding and the tread pattern is clear.

固化后的轮胎花纹清,泡和缺料现象。

When wine is fermented, it gives off gas.

酒发酵时发出泡。

All kinds of glass defect will occur during the melting production, such as airbladder, stria and concretiono.

玻璃在生产过程中，会产生各种各样的缺陷，比如:泡、条纹和结石。这些缺陷都是在熔过程中发生的。

Research of the influences of Foam Expansion Ratio (FER) and the stability of foam to the cutterhead torque.

通过对试验结果的分析,得出泡稳定性以及发泡倍率对刀盘扭矩的影响规律。

According to the causes,the surface defects can be divided into blister containing non-metallic inclusion,blister without non-metallic inclusion and “raindrop”,“gills”，“mountained”.

不含有非金属夹杂的缺陷；由泡产生的“雨点”状缺陷；“鱼鳞”状缺陷；“山水画”状缺陷。

Based on those experiments, a mathematic model of process of intumescence was established with the neglect of the transfer motion of the bubble.

在实验基础上，忽略泡的迁移，建立了膨胀过程的数学模型。

CT scan performed at one week after treatment will show an area of necrosis, the cryolesion, which commonly has residual gas bubbles, not to be confused with infection.

术后一周的CT扫描显示坏疽部位和通常带有残余泡的冷冻创口没有受到感染的影响。

The incorporation of air bubbles in the glass spoiled it.

玻璃含有泡, 使它质量降低。

The water was bubbling gently in the pan.

水在锅里轻轻地冒着泡。

After curing, the tire is without bubble and underfeeding and the tread pattern is clear.

固化后的轮胎花纹清,泡和缺料现象。

When wine is fermented, it gives off gas.

酒发酵时发出泡。

All kinds of glass defect will occur during the melting production, such as airbladder, stria and concretiono.

玻璃在生产过程中，会产生各种各样的缺陷，比如:泡、条纹和结石。这些缺陷都是在熔过程中发生的。

Research of the influences of Foam Expansion Ratio (FER) and the stability of foam to the cutterhead torque.

通过对试验结果的分析,得出泡稳定性以及发泡倍率对刀盘扭矩的影响规律。

According to the causes,the surface defects can be divided into blister containing non-metallic inclusion,blister without non-metallic inclusion and “raindrop”,“gills”，“mountained”.

不含有非金属夹杂的缺陷；由泡产生的“雨点”状缺陷；“鱼鳞”状缺陷；“山水画”状缺陷。

Based on those experiments, a mathematic model of process of intumescence was established with the neglect of the transfer motion of the bubble.

在实验基础上，忽略泡的迁移，建立了膨胀过程的数学模型。

CT scan performed at one week after treatment will show an area of necrosis, the cryolesion, which commonly has residual gas bubbles, not to be confused with infection.

术后一周的CT扫描显示坏疽部位和通常带有残余泡的冷冻创口没有受到感染的影响。

The incorporation of air bubbles in the glass spoiled it.

玻璃含有气泡, 使它质量降低。

The water was bubbling gently in the pan.

水在锅里轻轻地冒着气泡。

After curing, the tire is without bubble and underfeeding and the tread pattern is clear.

固化后的轮胎花纹清晰,无气泡和缺料现象。

When wine is fermented, it gives off gas.

酒发酵时发出气泡。

All kinds of glass defect will occur during the melting production, such as airbladder, stria and concretiono.

玻璃在生产过程中，会产生的缺陷，比如:气泡、条纹和结石。这些缺陷都是在熔过程中发生的。

Research of the influences of Foam Expansion Ratio (FER) and the stability of foam to the cutterhead torque.

通过对试验结果的分析,得出气泡以及发泡倍率对刀盘扭矩的影响规律。

According to the causes,the surface defects can be divided into blister containing non-metallic inclusion,blister without non-metallic inclusion and “raindrop”,“gills”，“mountained”.

不含有非金属夹杂的气囊表面缺陷；由气泡产生的“雨点”状表面缺陷；“鱼鳞”状表面缺陷；“山水画”状表面缺陷。

Based on those experiments, a mathematic model of process of intumescence was established with the neglect of the transfer motion of the bubble.

在实验基础上，忽略气泡的迁移，建立了膨胀过程的数学模型。

CT scan performed at one week after treatment will show an area of necrosis, the cryolesion, which commonly has residual gas bubbles, not to be confused with infection.

术后一周的CT扫描显示坏疽部位和通常带有残余气泡的冷冻创口没有受到感染的影响。

The incorporation of air bubbles in the glass spoiled it.

玻璃含有气, 使它质量降低。

The water was bubbling gently in the pan.

水在锅里轻轻地冒着气。

After curing, the tire is without bubble and underfeeding and the tread pattern is clear.

固化后的轮胎花纹清晰,无气和缺料现象。

When wine is fermented, it gives off gas.

酒发酵时发出气。

All kinds of glass defect will occur during the melting production, such as airbladder, stria and concretiono.

玻璃在生产过，产生各种各样的缺陷，比如:气、条纹和结石。这些缺陷都是在熔过发生的。

Research of the influences of Foam Expansion Ratio (FER) and the stability of foam to the cutterhead torque.

通过对试验结果的分析,得出气稳定性以及发对刀盘扭矩的影响规律。

According to the causes,the surface defects can be divided into blister containing non-metallic inclusion,blister without non-metallic inclusion and “raindrop”,“gills”，“mountained”.

不含有非金属夹杂的气囊表面缺陷；由气产生的“雨点”状表面缺陷；“鱼鳞”状表面缺陷；“山水画”状表面缺陷。

Based on those experiments, a mathematic model of process of intumescence was established with the neglect of the transfer motion of the bubble.

在实验基础上，忽略气的迁移，建立了膨胀过的数学模型。

CT scan performed at one week after treatment will show an area of necrosis, the cryolesion, which commonly has residual gas bubbles, not to be confused with infection.

术后一周的CT扫描显示坏疽部位和通常带有残余气的冷冻创口没有受到感染的影响。

The incorporation of air bubbles in the glass spoiled it.

玻璃含有气泡, 使它质量降低。

The water was bubbling gently in the pan.

水在锅里轻轻地冒着气泡。

After curing, the tire is without bubble and underfeeding and the tread pattern is clear.

固化后的轮胎花纹清晰,无气泡和缺料现象。

When wine is fermented, it gives off gas.

酒发酵时发出气泡。

All kinds of glass defect will occur during the melting production, such as airbladder, stria and concretiono.

玻璃在生产过程中，会产生的缺陷，比如:气泡、条纹和结石。这些缺陷都是在熔过程中发生的。

Research of the influences of Foam Expansion Ratio (FER) and the stability of foam to the cutterhead torque.

通过对试验结果的分析,得出气泡以及发泡倍率对刀盘扭矩的影响规律。

According to the causes,the surface defects can be divided into blister containing non-metallic inclusion,blister without non-metallic inclusion and “raindrop”,“gills”，“mountained”.

不含有非金属夹杂的气囊表面缺陷；由气泡产生的“雨点”状表面缺陷；“鱼鳞”状表面缺陷；“山水画”状表面缺陷。

Based on those experiments, a mathematic model of process of intumescence was established with the neglect of the transfer motion of the bubble.

在实验基础上，忽略气泡的迁移，建立了膨胀过程的数学模型。

CT scan performed at one week after treatment will show an area of necrosis, the cryolesion, which commonly has residual gas bubbles, not to be confused with infection.

术后一周的CT扫描显示坏疽部位和通常带有残余气泡的冷冻创口没有受到感染的影响。