A modified form of sprue gate is also used on underfeed moulds and runnerless moulds.

在点浇口形式具或无流道具也用到另一种形式主流道。

The microstructure and property of the free cutting unquenched plastic die steels have been studied.

研究了易切削系非调质塑料具钢组织与性能。

The superconduct-heating tube mentioned in this paper is a new technology with good developmentprospect.

提到使用热超导管冷却具是一项全新技术,很有发展前景。

We make Storage Facility,Sheet Metal Processing,Mold Frisket,Cable Raceway,Stacker Bed.

本公司专业制造仓储备,免螺丝角钢架,电缆线槽,钢铁板加工,具架,栈板,位于台南.

Can undertake the design and manufacture all kinds of plastic pipe, heterotypic Mold and wood product processing.

可承接计制造各种塑料管材、异型 材具及产品加工。

Cold upset female die of fillister head is the key mold in the manufacturing process of heading bolt.

冷镦圆头凹是冷镦螺栓生产过程关键具。

The article has described the structure and working principle of multiprocess composite die for automobile deafener closure.

介绍了汽车消声器隔板多工序冲压复合具结构、工作原理。

Choose the outer surface of the goods as the parting plane to make goods demold successfully.

本具考虑到年产量、工厂备及塑件精度要求，选择了一四腔。

The molding method,process,and the equipment of thermoset runnerless injection molding have been discussed in this paper.

论述了无流道热固性塑料注射成型方法、工艺、备和具计方面问题。

Consequently, the stand or fall of patternmaking master technology will affect the integral quality of the mould directly.

因而，制师傅技术好坏将直接影响到具整体质量。

It has conquered the old method in machining the pipe of bus frame, which depend on aptotic mould formerly.

克服了依靠固定具仿形加工车辆骨架弧度管方法缺点。

Design and manufacture methods of injection mold for the defecator body were introduced,and working process of mold was stated.

介绍了清净管体注射计与制造方法,并阐述了具工作过程。

We also have:toolmaking department ,silk screen,pad printer,automatic spraying producing line and other facilities.

具厂、注塑机、丝印拉、移印机、激光雕刻机、手工喷油生产线、烫金机等备。

3 Lightly brush six 1 cup-capacity (6cm-diameter base) dariole moulds with a little butter and dust with sugar.

取6个小圆饼具（底部直径6厘米，容量为1杯），在里面轻刷一层黄油，上面撒上糖。

The process calculations such as layout chart of punching die for locatized plate, punching pressure, pressural center and etc.

分析了接线片结构特点和冲压工艺性,介绍了零件排样计方案、具结构及主要特点。

Abstract: Cold upset female die of fillister head is the key mold in the manufacturing process of heading bolt.

摘 要: 冷镦圆头凹是冷镦螺栓生产过程关键具。

We have ensured our products’ trimness in appearance and excellence in quality through a centralized management system of storing finished mold products.

统一具存放管理措施，保证具外观上整洁及品质上精准。

Die centering in press is obtained by milling a slot on the bottom subplate parallel to the direction of the feed.

通过在与进料方向平行底部底板上铣出一个狭槽来实现压床上具心调整。

Good experiences of plastic, sheet metal and magnalium alloy parts design - Good knowledge of injection mold, stamping die and die-casting mold.

★ 熟悉塑胶材料及其具，熟悉钣金冲压及其具，熟悉镁铝合金压铸工艺和结构计。

The machine body is in inclinable cast structure,making it convenient for punched items or scraps to slide down on the dies.

机身为可倾式铸造结构,倾斜时便于冲件或废料从具上滑下,转键式刚性离合器,滑块上装有压塌式保险装置。

A modified form of sprue gate is also used on underfeed moulds and runnerless moulds.

在点浇口形式的模具或流道模具也用到另一种形式主流道。

The microstructure and property of the free cutting unquenched plastic die steels have been studied.

研究易切削系非调质塑料模具钢的组织与性能。

The superconduct-heating tube mentioned in this paper is a new technology with good developmentprospect.

提到的使用热超导管冷却模具是一项全新技术,很有发展前景。

We make Storage Facility,Sheet Metal Processing,Mold Frisket,Cable Raceway,Stacker Bed.

本公司专业制造仓储,螺丝角钢架,电缆线槽,钢铁板加工,模具架,栈板,位于台南.

Can undertake the design and manufacture all kinds of plastic pipe, heterotypic Mold and wood product processing.

可承接计制造各种塑料管材、异型 材模具及产品加工。

Cold upset female die of fillister head is the key mold in the manufacturing process of heading bolt.

冷镦圆头凹模是冷镦螺栓生产过程的关键模具。

The article has described the structure and working principle of multiprocess composite die for automobile deafener closure.

介绍汽车消声器隔板多工序冲压复合模具的结构、工作原理。

Choose the outer surface of the goods as the parting plane to make goods demold successfully.

本模具考虑到年产量、工厂的及塑件的精度要求，选择一模四腔。

The molding method,process,and the equipment of thermoset runnerless injection molding have been discussed in this paper.

论流道热固性塑料注射成型的方法、工艺、和模具计方面的问题。

Consequently, the stand or fall of patternmaking master technology will affect the integral quality of the mould directly.

因而，制模师傅技术的好坏将直接影响到模具的整体质量。

It has conquered the old method in machining the pipe of bus frame, which depend on aptotic mould formerly.

克服依靠固定模具仿形加工车辆骨架弧度管方法的缺点。

Design and manufacture methods of injection mold for the defecator body were introduced,and working process of mold was stated.

介绍清净管体注射模的计与制造方法,并阐模具的工作过程。

We also have:toolmaking department ,silk screen,pad printer,automatic spraying producing line and other facilities.

模具厂、注塑机、丝印拉、移印机、激光雕刻机、手工喷油生产线、烫金机等。

3 Lightly brush six 1 cup-capacity (6cm-diameter base) dariole moulds with a little butter and dust with sugar.

取6个小圆饼模具（底部直径6厘米，容量为1杯），在里面轻刷一层黄油，上面撒上糖。

The process calculations such as layout chart of punching die for locatized plate, punching pressure, pressural center and etc.

分析接线片的结构特点和冲压工艺性,介绍零件的排样计方案、模具结构及主要特点。

Abstract: Cold upset female die of fillister head is the key mold in the manufacturing process of heading bolt.

摘 要: 冷镦圆头凹模是冷镦螺栓生产过程的关键模具。

We have ensured our products’ trimness in appearance and excellence in quality through a centralized management system of storing finished mold products.

统一的模具存放管理措施，保证模具外观上的整洁及品质上的精准。

Die centering in press is obtained by milling a slot on the bottom subplate parallel to the direction of the feed.

通过在与进料方向平行的底部底板上铣出一个狭槽来实现压床上模具心的调整。

Good experiences of plastic, sheet metal and magnalium alloy parts design - Good knowledge of injection mold, stamping die and die-casting mold.

★ 熟悉塑胶材料及其模具，熟悉钣金冲压及其模具，熟悉镁铝合金的压铸工艺和结构计。

The machine body is in inclinable cast structure,making it convenient for punched items or scraps to slide down on the dies.

机身为可倾式铸造结构,倾斜时便于冲件或废料从模具上滑下,转键式刚性离合器,滑块上装有压塌式保险装置。

A modified form of sprue gate is also used on underfeed moulds and runnerless moulds.

在点浇口形式或无流道也用到另一种形式主流道。

The microstructure and property of the free cutting unquenched plastic die steels have been studied.

研究了易切削系非调质塑料钢组织与性能。

The superconduct-heating tube mentioned in this paper is a new technology with good developmentprospect.

提到使用热超导管冷却是一项全新技术,很有发展前景。

We make Storage Facility,Sheet Metal Processing,Mold Frisket,Cable Raceway,Stacker Bed.

本公司专业制造仓储设备,免螺丝角钢架,电缆线槽,钢铁板加工,架,栈板,位于台南.

Can undertake the design and manufacture all kinds of plastic pipe, heterotypic Mold and wood product processing.

可承接设计制造各种塑料管、 及产品加工。

Cold upset female die of fillister head is the key mold in the manufacturing process of heading bolt.

冷镦圆头凹是冷镦螺栓生产过程关键。

The article has described the structure and working principle of multiprocess composite die for automobile deafener closure.

介绍了汽车消声器隔板多工序冲压复合结构、工作原理。

Choose the outer surface of the goods as the parting plane to make goods demold successfully.

本考虑到年产量、工厂设备及塑件精度要求，选择了一四腔。

The molding method,process,and the equipment of thermoset runnerless injection molding have been discussed in this paper.

论述了无流道热固性塑料注射成方法、工艺、设备和设计方面问题。

Consequently, the stand or fall of patternmaking master technology will affect the integral quality of the mould directly.

因而，制师傅技术好坏将直接影响到整体质量。

It has conquered the old method in machining the pipe of bus frame, which depend on aptotic mould formerly.

克服了依靠固定仿形加工车辆骨架弧度管方法缺点。

Design and manufacture methods of injection mold for the defecator body were introduced,and working process of mold was stated.

介绍了清净管体注射设计与制造方法,并阐述了工作过程。

We also have:toolmaking department ,silk screen,pad printer,automatic spraying producing line and other facilities.

厂、注塑机、丝印拉、移印机、激光雕刻机、手工喷油生产线、烫金机等设备。

3 Lightly brush six 1 cup-capacity (6cm-diameter base) dariole moulds with a little butter and dust with sugar.

取6个小圆饼（底部直径6厘米，容量为1杯），在里面轻刷一层黄油，上面撒上糖。

The process calculations such as layout chart of punching die for locatized plate, punching pressure, pressural center and etc.

分析了接线片结构特点和冲压工艺性,介绍了零件排样设计方案、结构及主要特点。

Abstract: Cold upset female die of fillister head is the key mold in the manufacturing process of heading bolt.

摘 要: 冷镦圆头凹是冷镦螺栓生产过程关键。

We have ensured our products’ trimness in appearance and excellence in quality through a centralized management system of storing finished mold products.

统一存放管理措施，保证外观上整洁及品质上精准。

Die centering in press is obtained by milling a slot on the bottom subplate parallel to the direction of the feed.

通过在与进料方向平行底部底板上铣出一个狭槽来实现压床上心调整。

Good experiences of plastic, sheet metal and magnalium alloy parts design - Good knowledge of injection mold, stamping die and die-casting mold.

★ 熟悉塑胶料及其，熟悉钣金冲压及其，熟悉镁铝合金压铸工艺和结构设计。

The machine body is in inclinable cast structure,making it convenient for punched items or scraps to slide down on the dies.

机身为可倾式铸造结构,倾斜时便于冲件或废料从上滑下,转键式刚性离合器,滑块上装有压塌式保险装置。

A modified form of sprue gate is also used on underfeed moulds and runnerless moulds.

在点浇口形式的模具或无流道模具也用到另一种形式主流道。

The microstructure and property of the free cutting unquenched plastic die steels have been studied.

研究了易切削系非调质塑料模具钢的组织与性能。

The superconduct-heating tube mentioned in this paper is a new technology with good developmentprospect.

提到的使用热超导管却模具是一项全新技术,很有发展前景。

We make Storage Facility,Sheet Metal Processing,Mold Frisket,Cable Raceway,Stacker Bed.

本公司专业制造仓储设备,免螺丝角钢架,电缆线槽,钢铁加,模具架,栈,位于台南.

Can undertake the design and manufacture all kinds of plastic pipe, heterotypic Mold and wood product processing.

可承接设计制造各种塑料管材、异型 材模具及产品加。

Cold upset female die of fillister head is the key mold in the manufacturing process of heading bolt.

圆头凹模是螺栓生产过程的关键模具。

The article has described the structure and working principle of multiprocess composite die for automobile deafener closure.

介绍了汽车消声器序冲压复合模具的结构、作原理。

Choose the outer surface of the goods as the parting plane to make goods demold successfully.

本模具考虑到年产量、厂的设备及塑件的精度要求，选择了一模四腔。

The molding method,process,and the equipment of thermoset runnerless injection molding have been discussed in this paper.

论述了无流道热固性塑料注射成型的方法、艺、设备和模具设计方面的问题。

Consequently, the stand or fall of patternmaking master technology will affect the integral quality of the mould directly.

因而，制模师傅技术的好坏将直接影响到模具的整体质量。

It has conquered the old method in machining the pipe of bus frame, which depend on aptotic mould formerly.

克服了依靠固定模具仿形加车辆骨架弧度管方法的缺点。

Design and manufacture methods of injection mold for the defecator body were introduced,and working process of mold was stated.

介绍了清净管体注射模的设计与制造方法,并阐述了模具的作过程。

We also have:toolmaking department ,silk screen,pad printer,automatic spraying producing line and other facilities.

模具厂、注塑机、丝印拉、移印机、激光雕刻机、手喷油生产线、烫金机等设备。

3 Lightly brush six 1 cup-capacity (6cm-diameter base) dariole moulds with a little butter and dust with sugar.

取6个小圆饼模具（底部直径6厘米，容量为1杯），在里面轻刷一层黄油，上面撒上糖。

The process calculations such as layout chart of punching die for locatized plate, punching pressure, pressural center and etc.

分析了接线片的结构特点和冲压艺性,介绍了零件的排样设计方案、模具结构及主要特点。

Abstract: Cold upset female die of fillister head is the key mold in the manufacturing process of heading bolt.

摘 要: 圆头凹模是螺栓生产过程的关键模具。

We have ensured our products’ trimness in appearance and excellence in quality through a centralized management system of storing finished mold products.

统一的模具存放管理措施，保证模具外观上的整洁及品质上的精准。

Die centering in press is obtained by milling a slot on the bottom subplate parallel to the direction of the feed.

通过在与进料方向平行的底部底上铣出一个狭槽来实现压床上模具心的调整。

Good experiences of plastic, sheet metal and magnalium alloy parts design - Good knowledge of injection mold, stamping die and die-casting mold.

★ 熟悉塑胶材料及其模具，熟悉钣金冲压及其模具，熟悉镁铝合金的压铸艺和结构设计。

The machine body is in inclinable cast structure,making it convenient for punched items or scraps to slide down on the dies.

机身为可倾式铸造结构,倾斜时便于冲件或废料从模具上滑下,转键式刚性离合器,滑块上装有压塌式保险装置。

A modified form of sprue gate is also used on underfeed moulds and runnerless moulds.

在点浇口形式的模具道模具也用到另一种形式主道。

The microstructure and property of the free cutting unquenched plastic die steels have been studied.

研究了易切削系非调质塑料模具钢的组织与性能。

The superconduct-heating tube mentioned in this paper is a new technology with good developmentprospect.

提到的使用热超导冷却模具是一项全新技术,很有发展前景。

We make Storage Facility,Sheet Metal Processing,Mold Frisket,Cable Raceway,Stacker Bed.

本公司专业制造仓储设备,免螺丝角钢架,电缆线槽,钢铁板加工,模具架,栈板,位于台南.

Can undertake the design and manufacture all kinds of plastic pipe, heterotypic Mold and wood product processing.

可承接设计制造各种塑料材、异型 材模具及产品加工。

Cold upset female die of fillister head is the key mold in the manufacturing process of heading bolt.

冷镦圆头凹模是冷镦螺栓生产过程的关键模具。

The article has described the structure and working principle of multiprocess composite die for automobile deafener closure.

介绍了汽车消声器隔板多工序冲压复合模具的结构、工作原理。

Choose the outer surface of the goods as the parting plane to make goods demold successfully.

本模具考虑到年产量、工厂的设备及塑件的精度要求，选择了一模四腔。

The molding method,process,and the equipment of thermoset runnerless injection molding have been discussed in this paper.

论述了道热固性塑料注射成型的法、工艺、设备和模具设计面的问题。

Consequently, the stand or fall of patternmaking master technology will affect the integral quality of the mould directly.

因而，制模师傅技术的好坏将直接影响到模具的整体质量。

It has conquered the old method in machining the pipe of bus frame, which depend on aptotic mould formerly.

克服了依靠固定模具仿形加工车辆骨架弧度法的缺点。

Design and manufacture methods of injection mold for the defecator body were introduced,and working process of mold was stated.

介绍了清净体注射模的设计与制造法,并阐述了模具的工作过程。

We also have:toolmaking department ,silk screen,pad printer,automatic spraying producing line and other facilities.

模具厂、注塑机、丝印拉、移印机、激光雕刻机、手工喷油生产线、烫金机等设备。

3 Lightly brush six 1 cup-capacity (6cm-diameter base) dariole moulds with a little butter and dust with sugar.

取6个小圆饼模具（底部直径6厘米，容量为1杯），在里面轻刷一层黄油，上面撒上糖。

The process calculations such as layout chart of punching die for locatized plate, punching pressure, pressural center and etc.

分析了接线片的结构特点和冲压工艺性,介绍了零件的排样设计案、模具结构及主要特点。

Abstract: Cold upset female die of fillister head is the key mold in the manufacturing process of heading bolt.

摘 要: 冷镦圆头凹模是冷镦螺栓生产过程的关键模具。

We have ensured our products’ trimness in appearance and excellence in quality through a centralized management system of storing finished mold products.

统一的模具存放理措施，保证模具外观上的整洁及品质上的精准。

Die centering in press is obtained by milling a slot on the bottom subplate parallel to the direction of the feed.

通过在与进料向平行的底部底板上铣出一个狭槽来实现压床上模具心的调整。

Good experiences of plastic, sheet metal and magnalium alloy parts design - Good knowledge of injection mold, stamping die and die-casting mold.

★ 熟悉塑胶材料及其模具，熟悉钣金冲压及其模具，熟悉镁铝合金的压铸工艺和结构设计。

The machine body is in inclinable cast structure,making it convenient for punched items or scraps to slide down on the dies.

机身为可倾式铸造结构,倾斜时便于冲件废料从模具上滑下,转键式刚性离合器,滑块上装有压塌式保险装置。

A modified form of sprue gate is also used on underfeed moulds and runnerless moulds.

在点浇口的或无流道也用到另一种流道。

The microstructure and property of the free cutting unquenched plastic die steels have been studied.

研究了易切削系非调质塑料钢的组织与性能。

The superconduct-heating tube mentioned in this paper is a new technology with good developmentprospect.

提到的使用热超导管冷却是一项全新技术,很有发展前景。

We make Storage Facility,Sheet Metal Processing,Mold Frisket,Cable Raceway,Stacker Bed.

本公司专业制造仓储设备,免螺丝角钢架,电缆线槽,钢铁板加工,架,栈板,位于台南.

Can undertake the design and manufacture all kinds of plastic pipe, heterotypic Mold and wood product processing.

可承接设计制造各种塑料管材、异型 材及产品加工。

Cold upset female die of fillister head is the key mold in the manufacturing process of heading bolt.

冷镦圆头凹是冷镦螺栓生产过程的关键。

The article has described the structure and working principle of multiprocess composite die for automobile deafener closure.

介绍了汽车消声器隔板多工序冲压复合的结构、工作原理。

Choose the outer surface of the goods as the parting plane to make goods demold successfully.

本考虑到年产量、工厂的设备及塑件的精度要求，选择了一四腔。

The molding method,process,and the equipment of thermoset runnerless injection molding have been discussed in this paper.

论述了无流道热固性塑料注射成型的方法、工艺、设备和设计方面的问题。

Consequently, the stand or fall of patternmaking master technology will affect the integral quality of the mould directly.

因而，制师傅技术的好坏将直接影响到的整体质量。

It has conquered the old method in machining the pipe of bus frame, which depend on aptotic mould formerly.

克服了依靠固仿加工车辆骨架弧度管方法的缺点。

Design and manufacture methods of injection mold for the defecator body were introduced,and working process of mold was stated.

介绍了清净管体注射的设计与制造方法,并阐述了的工作过程。

We also have:toolmaking department ,silk screen,pad printer,automatic spraying producing line and other facilities.

厂、注塑机、丝印拉、移印机、激光雕刻机、手工喷油生产线、烫金机等设备。

3 Lightly brush six 1 cup-capacity (6cm-diameter base) dariole moulds with a little butter and dust with sugar.

取6个小圆饼（底部直径6厘米，容量为1杯），在里面轻刷一层黄油，上面撒上糖。

The process calculations such as layout chart of punching die for locatized plate, punching pressure, pressural center and etc.

分析了接线片的结构特点和冲压工艺性,介绍了零件的排样设计方案、结构及要特点。

Abstract: Cold upset female die of fillister head is the key mold in the manufacturing process of heading bolt.

摘 要: 冷镦圆头凹是冷镦螺栓生产过程的关键。

We have ensured our products’ trimness in appearance and excellence in quality through a centralized management system of storing finished mold products.

统一的存放管理措施，保证外观上的整洁及品质上的精准。

Die centering in press is obtained by milling a slot on the bottom subplate parallel to the direction of the feed.

通过在与进料方向平行的底部底板上铣出一个狭槽来实现压床上心的调整。

Good experiences of plastic, sheet metal and magnalium alloy parts design - Good knowledge of injection mold, stamping die and die-casting mold.

★ 熟悉塑胶材料及其，熟悉钣金冲压及其，熟悉镁铝合金的压铸工艺和结构设计。

The machine body is in inclinable cast structure,making it convenient for punched items or scraps to slide down on the dies.

机身为可倾铸造结构,倾斜时便于冲件或废料从上滑下,转键刚性离合器,滑块上装有压塌保险装置。

A modified form of sprue gate is also used on underfeed moulds and runnerless moulds.

在点浇口形式的具或无流道具也用到另一种形式主流道。

The microstructure and property of the free cutting unquenched plastic die steels have been studied.

研究易切削系非调质塑料具钢的组织与性能。

The superconduct-heating tube mentioned in this paper is a new technology with good developmentprospect.

提到的使用热超导管却具一项全新技术,很有发展前景。

We make Storage Facility,Sheet Metal Processing,Mold Frisket,Cable Raceway,Stacker Bed.

本公司专业制造仓储设备,免螺丝角钢架,电缆线槽,钢铁板加工,具架,栈板,位于台南.

Can undertake the design and manufacture all kinds of plastic pipe, heterotypic Mold and wood product processing.

可承接设计制造各种塑料管材、异型 材具及产品加工。

Cold upset female die of fillister head is the key mold in the manufacturing process of heading bolt.

镦圆头凹镦螺栓生产过程的关键具。

The article has described the structure and working principle of multiprocess composite die for automobile deafener closure.

介绍消声器隔板多工序冲压复合具的结构、工作原理。

Choose the outer surface of the goods as the parting plane to make goods demold successfully.

本具考虑到年产量、工厂的设备及塑件的精度要求，选择一四腔。

The molding method,process,and the equipment of thermoset runnerless injection molding have been discussed in this paper.

论述无流道热固性塑料注射成型的方法、工艺、设备和具设计方面的问题。

Consequently, the stand or fall of patternmaking master technology will affect the integral quality of the mould directly.

因而，制师傅技术的好坏将直接影响到具的整体质量。

It has conquered the old method in machining the pipe of bus frame, which depend on aptotic mould formerly.

克服依靠固定具仿形加工辆骨架弧度管方法的缺点。

Design and manufacture methods of injection mold for the defecator body were introduced,and working process of mold was stated.

介绍清净管体注射的设计与制造方法,并阐述具的工作过程。

We also have:toolmaking department ,silk screen,pad printer,automatic spraying producing line and other facilities.

具厂、注塑机、丝印拉、移印机、激光雕刻机、手工喷油生产线、烫金机等设备。

3 Lightly brush six 1 cup-capacity (6cm-diameter base) dariole moulds with a little butter and dust with sugar.

取6个小圆饼具（底部直径6厘米，容量为1杯），在里面轻刷一层黄油，上面撒上糖。

The process calculations such as layout chart of punching die for locatized plate, punching pressure, pressural center and etc.

分析接线片的结构特点和冲压工艺性,介绍零件的排样设计方案、具结构及主要特点。

Abstract: Cold upset female die of fillister head is the key mold in the manufacturing process of heading bolt.

摘 要: 镦圆头凹镦螺栓生产过程的关键具。

We have ensured our products’ trimness in appearance and excellence in quality through a centralized management system of storing finished mold products.

统一的具存放管理措施，保证具外观上的整洁及品质上的精准。

Die centering in press is obtained by milling a slot on the bottom subplate parallel to the direction of the feed.

通过在与进料方向平行的底部底板上铣出一个狭槽来实现压床上具心的调整。

Good experiences of plastic, sheet metal and magnalium alloy parts design - Good knowledge of injection mold, stamping die and die-casting mold.

★ 熟悉塑胶材料及其具，熟悉钣金冲压及其具，熟悉镁铝合金的压铸工艺和结构设计。

The machine body is in inclinable cast structure,making it convenient for punched items or scraps to slide down on the dies.

机身为可倾式铸造结构,倾斜时便于冲件或废料从具上滑下,转键式刚性离合器,滑块上装有压塌式保险装置。

A modified form of sprue gate is also used on underfeed moulds and runnerless moulds.

在点浇口形式的模具或无流道模具也用另一种形式主流道。

The microstructure and property of the free cutting unquenched plastic die steels have been studied.

研究了易切削系非调质塑料模具钢的组织与性能。

The superconduct-heating tube mentioned in this paper is a new technology with good developmentprospect.

提的使用热超导管冷却模具是一项全新技术,很有发展前景。

We make Storage Facility,Sheet Metal Processing,Mold Frisket,Cable Raceway,Stacker Bed.

本公司专业制造仓储备,免螺丝角钢架,电缆线槽,钢铁板加工,模具架,栈板,位于台南.

Can undertake the design and manufacture all kinds of plastic pipe, heterotypic Mold and wood product processing.

可计制造各种塑料管材、异型 材模具及产品加工。

Cold upset female die of fillister head is the key mold in the manufacturing process of heading bolt.

冷镦圆头凹模是冷镦螺栓生产过程的关键模具。

The article has described the structure and working principle of multiprocess composite die for automobile deafener closure.

介绍了汽车消声器隔板多工序冲压复合模具的结构、工作原理。

Choose the outer surface of the goods as the parting plane to make goods demold successfully.

本模具年产量、工厂的备及塑件的精度要求，选择了一模四腔。

The molding method,process,and the equipment of thermoset runnerless injection molding have been discussed in this paper.

论述了无流道热固性塑料注射成型的方法、工艺、备和模具计方面的问题。

Consequently, the stand or fall of patternmaking master technology will affect the integral quality of the mould directly.

因而，制模师傅技术的好坏将直影响模具的整体质量。

It has conquered the old method in machining the pipe of bus frame, which depend on aptotic mould formerly.

克服了依靠固定模具仿形加工车辆骨架弧度管方法的缺点。

Design and manufacture methods of injection mold for the defecator body were introduced,and working process of mold was stated.

介绍了清净管体注射模的计与制造方法,并阐述了模具的工作过程。

We also have:toolmaking department ,silk screen,pad printer,automatic spraying producing line and other facilities.

模具厂、注塑机、丝印拉、移印机、激光雕刻机、手工喷油生产线、烫金机等备。

3 Lightly brush six 1 cup-capacity (6cm-diameter base) dariole moulds with a little butter and dust with sugar.

取6个小圆饼模具（底部直径6厘米，容量为1杯），在里面轻刷一层黄油，上面撒上糖。

The process calculations such as layout chart of punching die for locatized plate, punching pressure, pressural center and etc.

分析了线片的结构特点和冲压工艺性,介绍了零件的排样计方案、模具结构及主要特点。

Abstract: Cold upset female die of fillister head is the key mold in the manufacturing process of heading bolt.

摘 要: 冷镦圆头凹模是冷镦螺栓生产过程的关键模具。

We have ensured our products’ trimness in appearance and excellence in quality through a centralized management system of storing finished mold products.

统一的模具存放管理措施，保证模具外观上的整洁及品质上的精准。

Die centering in press is obtained by milling a slot on the bottom subplate parallel to the direction of the feed.

通过在与进料方向平行的底部底板上铣出一个狭槽来实现压床上模具心的调整。

Good experiences of plastic, sheet metal and magnalium alloy parts design - Good knowledge of injection mold, stamping die and die-casting mold.

★ 熟悉塑胶材料及其模具，熟悉钣金冲压及其模具，熟悉镁铝合金的压铸工艺和结构计。

The machine body is in inclinable cast structure,making it convenient for punched items or scraps to slide down on the dies.

机身为可倾式铸造结构,倾斜时便于冲件或废料从模具上滑下,转键式刚性离合器,滑块上装有压塌式保险装置。

A modified form of sprue gate is also used on underfeed moulds and runnerless moulds.

在点浇口形式的模具或无流道模具也用到另一种形式主流道。

The microstructure and property of the free cutting unquenched plastic die steels have been studied.

研究了易切调塑料模具钢的组织与性能。

The superconduct-heating tube mentioned in this paper is a new technology with good developmentprospect.

提到的使用热超导管冷却模具是一项全新技术,很有发展前景。

We make Storage Facility,Sheet Metal Processing,Mold Frisket,Cable Raceway,Stacker Bed.

本公司专业制造仓储设备,免螺丝角钢架,电缆线槽,钢铁板加工,模具架,栈板,位于台南.

Can undertake the design and manufacture all kinds of plastic pipe, heterotypic Mold and wood product processing.

可承接设计制造各种塑料管材、异型 材模具及产品加工。

Cold upset female die of fillister head is the key mold in the manufacturing process of heading bolt.

冷镦圆头凹模是冷镦螺栓生产过程的关键模具。

The article has described the structure and working principle of multiprocess composite die for automobile deafener closure.

介绍了汽车消声器隔板多工序冲压复合模具的结构、工作原理。

Choose the outer surface of the goods as the parting plane to make goods demold successfully.

本模具考虑到年产量、工厂的设备及塑件的精度要求，选择了一模四腔。

The molding method,process,and the equipment of thermoset runnerless injection molding have been discussed in this paper.

论述了无流道热固性塑料注射成型的方法、工艺、设备和模具设计方面的问题。

Consequently, the stand or fall of patternmaking master technology will affect the integral quality of the mould directly.

因而，制模师傅技术的好坏将直接影响到模具的量。

It has conquered the old method in machining the pipe of bus frame, which depend on aptotic mould formerly.

克服了依靠固定模具仿形加工车辆骨架弧度管方法的缺点。

Design and manufacture methods of injection mold for the defecator body were introduced,and working process of mold was stated.

介绍了清净管注射模的设计与制造方法,并阐述了模具的工作过程。

We also have:toolmaking department ,silk screen,pad printer,automatic spraying producing line and other facilities.

模具厂、注塑机、丝印拉、移印机、激光雕刻机、手工喷油生产线、烫金机等设备。

3 Lightly brush six 1 cup-capacity (6cm-diameter base) dariole moulds with a little butter and dust with sugar.

取6个小圆饼模具（底部直径6厘米，容量为1杯），在里面轻刷一层黄油，上面撒上糖。

The process calculations such as layout chart of punching die for locatized plate, punching pressure, pressural center and etc.

分析了接线片的结构特点和冲压工艺性,介绍了零件的排样设计方案、模具结构及主要特点。

Abstract: Cold upset female die of fillister head is the key mold in the manufacturing process of heading bolt.

摘 要: 冷镦圆头凹模是冷镦螺栓生产过程的关键模具。

We have ensured our products’ trimness in appearance and excellence in quality through a centralized management system of storing finished mold products.

统一的模具存放管理措施，保证模具外观上的洁及品上的精准。

Die centering in press is obtained by milling a slot on the bottom subplate parallel to the direction of the feed.

通过在与进料方向平行的底部底板上铣出一个狭槽来实现压床上模具心的调。

Good experiences of plastic, sheet metal and magnalium alloy parts design - Good knowledge of injection mold, stamping die and die-casting mold.

★ 熟悉塑胶材料及其模具，熟悉钣金冲压及其模具，熟悉镁铝合金的压铸工艺和结构设计。

The machine body is in inclinable cast structure,making it convenient for punched items or scraps to slide down on the dies.

机身为可倾式铸造结构,倾斜时便于冲件或废料从模具上滑下,转键式刚性离合器,滑块上装有压塌式保险装置。