"Half this number is less than 6 times the tens dight of the number by 4."

这个的一半比它的十位的6陪小于4.

The IMPOWER(string) returns a complex number raised to a power.

IMPOWER(字符串;) 函返回复的幂。

The parameters of digifax is adjust by the reference of wind tunnel test result.

针对风洞实验的结果对模拟的各项参设置进行调整。

The Six Sigma Black Belt should be able to read values from a cumulative frequency ogive.

6西格玛黑应计频次尖顶部读出。

A new method for predicting the motion of the hybrid monohull in regular wave is presented.

给出一种考虑粘性影响的单体复合船型运动预报的方法。

The constraint condition for the strain energy density function of incompressible hyperelasticity is proposed.

通过对各种有限元方法的分析比较，适当修改了已有的应变密度函的形式使之更适合计算。

57. The Six Sigma Black Belt should be able to read values from a cumulative frequency ogive.

六西格玛黑应该够计频次分布中读出。

If nonnumeric data is input, that read and any subsequent use of the stream will fail.

如果输入非型据，这次的读入以及流的后续使用都将失败。

The gust-cascade interaction noise was numerically simulated using computational aeroacoustics by solving the two-dimensional linearized Euler equations.

采用计算气动声学方法解二维线化欧拉方程对阵风与叶栅的干涉噪声进行了模拟。

The transient process that the axialflow in the centrifuge is established under a steady thermal driving isrevealed.

通过解得到了存在温度驱动情况下，离心机内形成小扰动流场的过程。

The fracturing process induced by different excavation sequence under final highwall with auger mining was numerically simulated.

对到界边坡下采用螺旋钻机开采煤柱不同开采顺序引起的破坏过程进行了模拟。

Arff. which contains terms and numerical data sets for test mining weka.

这是一个基于weka据挖掘的实验测试据集,格式为.arff,里面包含有名词性和型的据集,用于weka挖掘测试.-This is a weka data mining based on the experimental data sets format.

It is calculated as half of the value of the sampling rate.Passing this level causes aliasing distortion, or foldover.

它的计算方法是将采样率除以二，超过这个将会导致折叠失真，或称折叠。

The Distinct Element Method(DEM)is a discontinuum-based numerical method especially applicable to solve the discontinuity problems in jointed rock mass.

离散元法是基于不连续性假设的方法,它特别适合于解节理岩体中的非连续性问题。

The two-dimensional axisymmetric subsonic-transonic-supersonic flow in an experimental arcjet thruster is simulated numerically using flux vector splitting method.

摘要对一实验电弧加热式发动机二维轴对称亚跨超音速流动进行了模拟，所采用的方法是矢通量分裂算法。

The cross-section curvature ductility ratio for R.C inequiaxial T-shaped, L-shaped and cress-shaped columns is calculated by numerical method.

摘要采用非线性全过程分析方法，计算了钢筋混凝土不等肢T形、L形和十字形柱截面模型在多种工况下的截面曲率延性比。

The method simplifies the procedure of the trial function choice, and could be used in numerical calculation in geotechnique engineering.

该方法简化了试函的选择，适用于岩土工程中的各种计算。

Numerical simulations of laminar flow separation and reattachment occurred in an annular backstep passage are performed by the SIMPLER algorithm.

用SIMPLER算法对流过环形后台阶通道内的层流分离和再附着进行了模拟。

In the paper, study on displacement law of blank hole for forming cylindraceous with bottom border by numerical simulation technology.

通过仿真研究了底孔的圆筒形件成形后底孔的变形规律,在此基础上建立了底孔的圆筒形件成形后毛料中心孔变形规律的经验公式。

The construction of boundary type cubature is a problem that has been noticed for a very long time in numerical integration.

边界型积公式是积分法研究方向早就被注意的问题。

"Half this number is less than 6 times the tens dight of the number by 4."

这数值的半比它的十位数值的6陪小于4.

The IMPOWER(string) returns a complex number raised to a power.

IMPOWER(字符串;数值) 函数返回复数的幂。

The parameters of digifax is adjust by the reference of wind tunnel test result.

针对风洞实验的结果对数值模拟的各项参数设置进行调整。

The Six Sigma Black Belt should be able to read values from a cumulative frequency ogive.

6西格玛黑应能从累计频次尖顶部读出数值。

A new method for predicting the motion of the hybrid monohull in regular wave is presented.

给出种考虑粘性影响的单体复合船型运动预报的数值方法。

The constraint condition for the strain energy density function of incompressible hyperelasticity is proposed.

通过对各种有限元方法的分析比较，适当修改了已有的应变能密度函数的形式使之更适合数值计算。

57. The Six Sigma Black Belt should be able to read values from a cumulative frequency ogive.

六西格玛黑应该能够从累计频次分布中读出数值。

If nonnumeric data is input, that read and any subsequent use of the stream will fail.

如果输入非数值型数据，这次的读入以及流的后续使用都将失败。

The gust-cascade interaction noise was numerically simulated using computational aeroacoustics by solving the two-dimensional linearized Euler equations.

采用计算气动声学方法求解二维线化欧拉方程对阵风与叶栅的干涉噪声进行了数值模拟。

The transient process that the axialflow in the centrifuge is established under a steady thermal driving isrevealed.

通过数值求解得到了存在温度驱动情况下，离心机内形成小扰动流场的过程。

The fracturing process induced by different excavation sequence under final highwall with auger mining was numerically simulated.

对到界边坡下采用螺旋钻机开采煤柱不同开采顺序引起的破坏过程进行了数值模拟。

Arff. which contains terms and numerical data sets for test mining weka.

这基于weka数据挖掘的实验测试数据集,格式为.arff,里面包含有名词性和数值型的数据集,用于weka挖掘测试.-This is a weka data mining based on the experimental data sets format.

It is calculated as half of the value of the sampling rate.Passing this level causes aliasing distortion, or foldover.

它的计算方法将采样率除以二，超过这数值将会导致折叠失真，或称折叠。

The Distinct Element Method(DEM)is a discontinuum-based numerical method especially applicable to solve the discontinuity problems in jointed rock mass.

离散元法基于不连续性假设的数值方法,它特别适合于求解节理岩体中的非连续性问题。

The two-dimensional axisymmetric subsonic-transonic-supersonic flow in an experimental arcjet thruster is simulated numerically using flux vector splitting method.

摘要对实验电弧加热式发动机二维轴对称亚跨超音速流动进行了数值模拟，所采用的方法矢通量分裂算法。

The cross-section curvature ductility ratio for R.C inequiaxial T-shaped, L-shaped and cress-shaped columns is calculated by numerical method.

摘要采用非线性全过程数值分析方法，计算了钢筋混凝土不等肢T形、L形和十字形柱截面模型在多种工况下的截面曲率延性比。

The method simplifies the procedure of the trial function choice, and could be used in numerical calculation in geotechnique engineering.

该方法简化了试函数的选择，适用于岩土工程中的各种数值计算。

Numerical simulations of laminar flow separation and reattachment occurred in an annular backstep passage are performed by the SIMPLER algorithm.

用SIMPLER算法对流过环形后台阶通道内的层流分离和再附着进行了数值模拟。

In the paper, study on displacement law of blank hole for forming cylindraceous with bottom border by numerical simulation technology.

通过数值仿真研究了底孔的圆筒形件成形后底孔的变形规律,在此基础上建立了底孔的圆筒形件成形后毛料中心孔变形规律的经验公式。

The construction of boundary type cubature is a problem that has been noticed for a very long time in numerical integration.

边界型求积公式数值积分法研究方向早就被注意的问题。

"Half this number is less than 6 times the tens dight of the number by 4."

这个数值一半比它十位数值6陪小于4.

The IMPOWER(string) returns a complex number raised to a power.

IMPOWER(字符串;数值) 函数返回复数幂。

The parameters of digifax is adjust by the reference of wind tunnel test result.

针对风洞实验结果对数值模拟各项参数设置进行调整。

The Six Sigma Black Belt should be able to read values from a cumulative frequency ogive.

6西格玛黑应能从累计频次尖顶部读出数值。

A new method for predicting the motion of the hybrid monohull in regular wave is presented.

给出一种考虑粘性影响单体复合船型运动预报数值法。

The constraint condition for the strain energy density function of incompressible hyperelasticity is proposed.

通过对各种有限元法分析比较，适当修改了已有应变能密度函数形式之更适合数值计算。

57. The Six Sigma Black Belt should be able to read values from a cumulative frequency ogive.

六西格玛黑应该能够从累计频次分布中读出数值。

If nonnumeric data is input, that read and any subsequent use of the stream will fail.

如果输入非数值型数据，这次读入以及流后都将失败。

The gust-cascade interaction noise was numerically simulated using computational aeroacoustics by solving the two-dimensional linearized Euler equations.

采计算气动声学法求解二维线化欧拉程对阵风与叶栅干涉噪声进行了数值模拟。

The transient process that the axialflow in the centrifuge is established under a steady thermal driving isrevealed.

通过数值求解得到了存在温度驱动情况下，离心机内形成小扰动流场过程。

The fracturing process induced by different excavation sequence under final highwall with auger mining was numerically simulated.

对到界边坡下采螺旋钻机开采煤柱不同开采顺序引起破坏过程进行了数值模拟。

Arff. which contains terms and numerical data sets for test mining weka.

这是一个基于weka数据挖掘实验测试数据集,格式为.arff,里面包含有名词性和数值型数据集,于weka挖掘测试.-This is a weka data mining based on the experimental data sets format.

It is calculated as half of the value of the sampling rate.Passing this level causes aliasing distortion, or foldover.

它计算法是将采样率除以二，超过这个数值将会导致折叠失真，或称折叠。

The Distinct Element Method(DEM)is a discontinuum-based numerical method especially applicable to solve the discontinuity problems in jointed rock mass.

离散元法是基于不连性假设数值法,它特别适合于求解节理岩体中非连性问题。

The two-dimensional axisymmetric subsonic-transonic-supersonic flow in an experimental arcjet thruster is simulated numerically using flux vector splitting method.

摘要对一实验电弧加热式发动机二维轴对称亚跨超音速流动进行了数值模拟，所采法是矢通量分裂算法。

The cross-section curvature ductility ratio for R.C inequiaxial T-shaped, L-shaped and cress-shaped columns is calculated by numerical method.

摘要采非线性全过程数值分析法，计算了钢筋混凝土不等肢T形、L形和十字形柱截面模型在多种工况下截面曲率延性比。

The method simplifies the procedure of the trial function choice, and could be used in numerical calculation in geotechnique engineering.

该法简化了试函数选择，适于岩土工程中各种数值计算。

Numerical simulations of laminar flow separation and reattachment occurred in an annular backstep passage are performed by the SIMPLER algorithm.

SIMPLER算法对流过环形后台阶通道内层流分离和再附着进行了数值模拟。

In the paper, study on displacement law of blank hole for forming cylindraceous with bottom border by numerical simulation technology.

通过数值仿真研究了底孔圆筒形件成形后底孔变形规律,在此基础上建立了底孔圆筒形件成形后毛料中心孔变形规律经验公式。

The construction of boundary type cubature is a problem that has been noticed for a very long time in numerical integration.

边界型求积公式是数值积分法研究向早就被注意问题。

"Half this number is less than 6 times the tens dight of the number by 4."

这个数值的一半比它的十位数值的6陪小于4.

The IMPOWER(string) returns a complex number raised to a power.

IMPOWER(字符串;数值) 函数返回复数的幂。

The parameters of digifax is adjust by the reference of wind tunnel test result.

针对风洞实验的结果对数值模拟的各项参数设置进行调整。

The Six Sigma Black Belt should be able to read values from a cumulative frequency ogive.

6西格玛黑应能从累计频次尖顶部出数值。

A new method for predicting the motion of the hybrid monohull in regular wave is presented.

给出一种考虑粘性影响的单体复合船型运动预报的数值方法。

The constraint condition for the strain energy density function of incompressible hyperelasticity is proposed.

通过对各种有限元方法的分析比较，当修改了已有的应变能密度函数的形式使合数值计算。

57. The Six Sigma Black Belt should be able to read values from a cumulative frequency ogive.

六西格玛黑应该能够从累计频次分出数值。

If nonnumeric data is input, that read and any subsequent use of the stream will fail.

如果输入非数值型数据，这次的入以及流的后续使用都将失败。

The gust-cascade interaction noise was numerically simulated using computational aeroacoustics by solving the two-dimensional linearized Euler equations.

采用计算气动声学方法求解二维线化欧拉方程对阵风与叶栅的干涉噪声进行了数值模拟。

The transient process that the axialflow in the centrifuge is established under a steady thermal driving isrevealed.

通过数值求解得到了存在温度驱动情况下，离心机内形成小扰动流场的过程。

The fracturing process induced by different excavation sequence under final highwall with auger mining was numerically simulated.

对到界边坡下采用螺旋钻机开采煤柱不同开采顺序引起的破坏过程进行了数值模拟。

Arff. which contains terms and numerical data sets for test mining weka.

这是一个基于weka数据挖掘的实验测试数据集,格式为.arff,里面包含有名词性和数值型的数据集,用于weka挖掘测试.-This is a weka data mining based on the experimental data sets format.

It is calculated as half of the value of the sampling rate.Passing this level causes aliasing distortion, or foldover.

它的计算方法是将采样率除以二，超过这个数值将会导致折叠失真，或称折叠。

The Distinct Element Method(DEM)is a discontinuum-based numerical method especially applicable to solve the discontinuity problems in jointed rock mass.

离散元法是基于不连续性假设的数值方法,它特别合于求解节理岩体的非连续性问题。

The two-dimensional axisymmetric subsonic-transonic-supersonic flow in an experimental arcjet thruster is simulated numerically using flux vector splitting method.

摘要对一实验电弧加热式发动机二维轴对称亚跨超音速流动进行了数值模拟，所采用的方法是矢通量分裂算法。

The cross-section curvature ductility ratio for R.C inequiaxial T-shaped, L-shaped and cress-shaped columns is calculated by numerical method.

摘要采用非线性全过程数值分析方法，计算了钢筋混凝土不等肢T形、L形和十字形柱截面模型在多种工况下的截面曲率延性比。

The method simplifies the procedure of the trial function choice, and could be used in numerical calculation in geotechnique engineering.

该方法简化了试函数的选择，用于岩土工程的各种数值计算。

Numerical simulations of laminar flow separation and reattachment occurred in an annular backstep passage are performed by the SIMPLER algorithm.

用SIMPLER算法对流过环形后台阶通道内的层流分离和再附着进行了数值模拟。

In the paper, study on displacement law of blank hole for forming cylindraceous with bottom border by numerical simulation technology.

通过数值仿真研究了底孔的圆筒形件成形后底孔的变形规律,在此基础上建立了底孔的圆筒形件成形后毛料心孔变形规律的经验公式。

The construction of boundary type cubature is a problem that has been noticed for a very long time in numerical integration.

边界型求积公式是数值积分法研究方向早就被注意的问题。

"Half this number is less than 6 times the tens dight of the number by 4."

这个数值的一半比它的十位数值的6陪小于4.

The IMPOWER(string) returns a complex number raised to a power.

IMPOWER(字符串;数值) 函数返回复数的幂。

The parameters of digifax is adjust by the reference of wind tunnel test result.

针对风洞实验的结果对数值模拟的各项参数设置进行调整。

The Six Sigma Black Belt should be able to read values from a cumulative frequency ogive.

6西格玛黑应能从累计频次尖顶部数值。

A new method for predicting the motion of the hybrid monohull in regular wave is presented.

给一种考虑粘性影响的单体复合船型运动预报的数值方法。

The constraint condition for the strain energy density function of incompressible hyperelasticity is proposed.

通过对各种有限元方法的分析比较，适当修改了已有的应变能密度函数的形式适合数值计算。

57. The Six Sigma Black Belt should be able to read values from a cumulative frequency ogive.

六西格玛黑应该能够从累计频次分布数值。

If nonnumeric data is input, that read and any subsequent use of the stream will fail.

如果输入非数值型数据，这次的入以及流的后续用都将失败。

The gust-cascade interaction noise was numerically simulated using computational aeroacoustics by solving the two-dimensional linearized Euler equations.

采用计算气动声学方法求解二维线化欧拉方程对阵风与叶栅的干涉噪声进行了数值模拟。

The transient process that the axialflow in the centrifuge is established under a steady thermal driving isrevealed.

通过数值求解得到了存在温度驱动情况下，离心机内形成小扰动流场的过程。

The fracturing process induced by different excavation sequence under final highwall with auger mining was numerically simulated.

对到界边坡下采用螺旋钻机开采煤柱不同开采顺序引起的破坏过程进行了数值模拟。

Arff. which contains terms and numerical data sets for test mining weka.

这是一个基于weka数据挖掘的实验测试数据集,格式为.arff,里面包含有名词性和数值型的数据集,用于weka挖掘测试.-This is a weka data mining based on the experimental data sets format.

It is calculated as half of the value of the sampling rate.Passing this level causes aliasing distortion, or foldover.

它的计算方法是将采样率除以二，超过这个数值将会导致折叠失真，或称折叠。

The Distinct Element Method(DEM)is a discontinuum-based numerical method especially applicable to solve the discontinuity problems in jointed rock mass.

离散元法是基于不连续性假设的数值方法,它特别适合于求解节理岩体的非连续性问题。

The two-dimensional axisymmetric subsonic-transonic-supersonic flow in an experimental arcjet thruster is simulated numerically using flux vector splitting method.

摘要对一实验电弧加热式发动机二维轴对称亚跨超音速流动进行了数值模拟，所采用的方法是矢通量分裂算法。

The cross-section curvature ductility ratio for R.C inequiaxial T-shaped, L-shaped and cress-shaped columns is calculated by numerical method.

摘要采用非线性全过程数值分析方法，计算了钢筋混凝土不等肢T形、L形和十字形柱截面模型在多种工况下的截面曲率延性比。

The method simplifies the procedure of the trial function choice, and could be used in numerical calculation in geotechnique engineering.

该方法简化了试函数的选择，适用于岩土工程的各种数值计算。

Numerical simulations of laminar flow separation and reattachment occurred in an annular backstep passage are performed by the SIMPLER algorithm.

用SIMPLER算法对流过环形后台阶通道内的层流分离和再附着进行了数值模拟。

In the paper, study on displacement law of blank hole for forming cylindraceous with bottom border by numerical simulation technology.

通过数值仿真研究了底孔的圆筒形件成形后底孔的变形规律,在此基础上建立了底孔的圆筒形件成形后毛料心孔变形规律的经验公式。

The construction of boundary type cubature is a problem that has been noticed for a very long time in numerical integration.

边界型求积公式是数值积分法研究方向早就被注意的问题。

"Half this number is less than 6 times the tens dight of the number by 4."

这个数值一半它十位数值6陪小于4.

The IMPOWER(string) returns a complex number raised to a power.

IMPOWER(字符串;数值) 函数返回复数幂。

The parameters of digifax is adjust by the reference of wind tunnel test result.

针对风洞实验结果对数值模拟各项参数设置进行调整。

The Six Sigma Black Belt should be able to read values from a cumulative frequency ogive.

6西格玛黑应能从累计频次尖顶部读出数值。

A new method for predicting the motion of the hybrid monohull in regular wave is presented.

给出一种考虑粘性影响单体复合船型运动预报数值方法。

The constraint condition for the strain energy density function of incompressible hyperelasticity is proposed.

通过对各种有限元方法较，适当修改了已有应变能密度函数形式使之更适合数值计算。

57. The Six Sigma Black Belt should be able to read values from a cumulative frequency ogive.

六西格玛黑应该能够从累计频次布中读出数值。

If nonnumeric data is input, that read and any subsequent use of the stream will fail.

如果输入非数值型数据，这次读入以及续使用都将失败。

The gust-cascade interaction noise was numerically simulated using computational aeroacoustics by solving the two-dimensional linearized Euler equations.

采用计算气动声学方法求解二维线化欧拉方程对阵风与叶栅干涉噪声进行了数值模拟。

The transient process that the axialflow in the centrifuge is established under a steady thermal driving isrevealed.

通过数值求解得到了存在温度驱动情况下，离心机内形成小扰动场过程。

The fracturing process induced by different excavation sequence under final highwall with auger mining was numerically simulated.

对到界边坡下采用螺旋钻机开采煤柱不同开采顺序引起破坏过程进行了数值模拟。

Arff. which contains terms and numerical data sets for test mining weka.

这是一个基于weka数据挖掘实验测试数据集,格式为.arff,里面包含有名词性和数值型数据集,用于weka挖掘测试.-This is a weka data mining based on the experimental data sets format.

It is calculated as half of the value of the sampling rate.Passing this level causes aliasing distortion, or foldover.

它计算方法是将采样率除以二，超过这个数值将会导致折叠失真，或称折叠。

The Distinct Element Method(DEM)is a discontinuum-based numerical method especially applicable to solve the discontinuity problems in jointed rock mass.

离散元法是基于不连续性假设数值方法,它特别适合于求解节理岩体中非连续性问题。

The two-dimensional axisymmetric subsonic-transonic-supersonic flow in an experimental arcjet thruster is simulated numerically using flux vector splitting method.

摘要对一实验电弧加热式发动机二维轴对称亚跨超音速动进行了数值模拟，所采用方法是矢通量裂算法。

The cross-section curvature ductility ratio for R.C inequiaxial T-shaped, L-shaped and cress-shaped columns is calculated by numerical method.

摘要采用非线性全过程数值方法，计算了钢筋混凝土不等肢T形、L形和十字形柱截面模型在多种工况下截面曲率延性。

The method simplifies the procedure of the trial function choice, and could be used in numerical calculation in geotechnique engineering.

该方法简化了试函数选择，适用于岩土工程中各种数值计算。

Numerical simulations of laminar flow separation and reattachment occurred in an annular backstep passage are performed by the SIMPLER algorithm.

用SIMPLER算法对过环形台阶通道内层离和再附着进行了数值模拟。

In the paper, study on displacement law of blank hole for forming cylindraceous with bottom border by numerical simulation technology.

通过数值仿真研究了底孔圆筒形件成形底孔变形规律,在此基础上建立了底孔圆筒形件成形毛料中心孔变形规律经验公式。

The construction of boundary type cubature is a problem that has been noticed for a very long time in numerical integration.

边界型求积公式是数值积法研究方向早就被注意问题。

"Half this number is less than 6 times the tens dight of the number by 4."

这个数的一半比它的十位数的6陪小于4.

The IMPOWER(string) returns a complex number raised to a power.

IMPOWER(字符串;数) 函数返回复数的幂。

The parameters of digifax is adjust by the reference of wind tunnel test result.

针对风洞实验的结果对数模拟的各项参数设置进行调整。

The Six Sigma Black Belt should be able to read values from a cumulative frequency ogive.

6西格玛黑应能从累计频次尖顶部读数。

A new method for predicting the motion of the hybrid monohull in regular wave is presented.

一种考虑粘性影响的单体复合船型运动预报的数方法。

The constraint condition for the strain energy density function of incompressible hyperelasticity is proposed.

通过对各种有限元方法的分析比较，适当修改了已有的应变能密度函数的形式使之更适合数计算。

57. The Six Sigma Black Belt should be able to read values from a cumulative frequency ogive.

六西格玛黑应该能够从累计频次分布中读数。

If nonnumeric data is input, that read and any subsequent use of the stream will fail.

如果输入非数型数据，这次的读入以及流的后续使用都将失败。

The gust-cascade interaction noise was numerically simulated using computational aeroacoustics by solving the two-dimensional linearized Euler equations.

采用计算气动学方法求解二维线化欧拉方程对阵风与叶栅的干进行了数模拟。

The transient process that the axialflow in the centrifuge is established under a steady thermal driving isrevealed.

通过数求解得到了存在温度驱动情况下，离心机内形成小扰动流场的过程。

The fracturing process induced by different excavation sequence under final highwall with auger mining was numerically simulated.

对到界边坡下采用螺旋钻机开采煤柱不同开采顺序引起的破坏过程进行了数模拟。

Arff. which contains terms and numerical data sets for test mining weka.

这是一个基于weka数据挖掘的实验测试数据集,格式为.arff,里面包含有名词性和数型的数据集,用于weka挖掘测试.-This is a weka data mining based on the experimental data sets format.

It is calculated as half of the value of the sampling rate.Passing this level causes aliasing distortion, or foldover.

它的计算方法是将采样率除以二，超过这个数将会导致折叠失真，或称折叠。

The Distinct Element Method(DEM)is a discontinuum-based numerical method especially applicable to solve the discontinuity problems in jointed rock mass.

离散元法是基于不连续性假设的数方法,它特别适合于求解节理岩体中的非连续性问题。

The two-dimensional axisymmetric subsonic-transonic-supersonic flow in an experimental arcjet thruster is simulated numerically using flux vector splitting method.

摘要对一实验电弧加热式发动机二维轴对称亚跨超音速流动进行了数模拟，所采用的方法是矢通量分裂算法。

The cross-section curvature ductility ratio for R.C inequiaxial T-shaped, L-shaped and cress-shaped columns is calculated by numerical method.

摘要采用非线性全过程数分析方法，计算了钢筋混凝土不等肢T形、L形和十字形柱截面模型在多种工况下的截面曲率延性比。

The method simplifies the procedure of the trial function choice, and could be used in numerical calculation in geotechnique engineering.

该方法简化了试函数的选择，适用于岩土工程中的各种数计算。

Numerical simulations of laminar flow separation and reattachment occurred in an annular backstep passage are performed by the SIMPLER algorithm.

用SIMPLER算法对流过环形后台阶通道内的层流分离和再附着进行了数模拟。

In the paper, study on displacement law of blank hole for forming cylindraceous with bottom border by numerical simulation technology.

通过数仿真研究了底孔的圆筒形件成形后底孔的变形规律,在此基础上建立了底孔的圆筒形件成形后毛料中心孔变形规律的经验公式。

The construction of boundary type cubature is a problem that has been noticed for a very long time in numerical integration.

边界型求积公式是数积分法研究方向早就被注意的问题。

"Half this number is less than 6 times the tens dight of the number by 4."

这个数值一半比它十位数值6陪小于4.

The IMPOWER(string) returns a complex number raised to a power.

IMPOWER(字符串;数值) 函数返回复数幂。

The parameters of digifax is adjust by the reference of wind tunnel test result.

针对风洞实验结果对数值模拟各项参数设置进行调整。

The Six Sigma Black Belt should be able to read values from a cumulative frequency ogive.

6西格玛黑应能从累计频次尖顶部读出数值。

A new method for predicting the motion of the hybrid monohull in regular wave is presented.

给出一种考虑粘性影响单体复合船型运动数值法。

The constraint condition for the strain energy density function of incompressible hyperelasticity is proposed.

通过对各种有限元法分析比较，适当修改了已有应变能密度函数形式使之更适合数值计算。

57. The Six Sigma Black Belt should be able to read values from a cumulative frequency ogive.

六西格玛黑应该能够从累计频次分布中读出数值。

If nonnumeric data is input, that read and any subsequent use of the stream will fail.

如果输入非数值型数据，这次读入以及流后续使用都将失败。

The gust-cascade interaction noise was numerically simulated using computational aeroacoustics by solving the two-dimensional linearized Euler equations.

采用计算气动声学法解二维线化欧拉程对阵风与叶栅干涉噪声进行了数值模拟。

The transient process that the axialflow in the centrifuge is established under a steady thermal driving isrevealed.

通过数值解得到了存在温度驱动情况下，离心机内形成小扰动流场过程。

The fracturing process induced by different excavation sequence under final highwall with auger mining was numerically simulated.

对到界边坡下采用螺旋钻机开采煤柱不同开采顺序引起破坏过程进行了数值模拟。

Arff. which contains terms and numerical data sets for test mining weka.

这是一个基于weka数据挖掘实验测试数据集,格式为.arff,里面包含有名词性和数值型数据集,用于weka挖掘测试.-This is a weka data mining based on the experimental data sets format.

It is calculated as half of the value of the sampling rate.Passing this level causes aliasing distortion, or foldover.

它计算法是将采样率除以二，超过这个数值将会导致折叠失真，或称折叠。

The Distinct Element Method(DEM)is a discontinuum-based numerical method especially applicable to solve the discontinuity problems in jointed rock mass.

离散元法是基于不连续性假设数值法,它特别适合于解节理岩体中非连续性问题。

The two-dimensional axisymmetric subsonic-transonic-supersonic flow in an experimental arcjet thruster is simulated numerically using flux vector splitting method.

摘要对一实验电弧加热式发动机二维轴对称亚跨超音速流动进行了数值模拟，所采用法是矢通量分裂算法。

The cross-section curvature ductility ratio for R.C inequiaxial T-shaped, L-shaped and cress-shaped columns is calculated by numerical method.

摘要采用非线性全过程数值分析法，计算了钢筋混凝土不等肢T形、L形和十字形柱截面模型在多种工况下截面曲率延性比。

The method simplifies the procedure of the trial function choice, and could be used in numerical calculation in geotechnique engineering.

该法简化了试函数选择，适用于岩土工程中各种数值计算。

Numerical simulations of laminar flow separation and reattachment occurred in an annular backstep passage are performed by the SIMPLER algorithm.

用SIMPLER算法对流过环形后台阶通道内层流分离和再附着进行了数值模拟。

In the paper, study on displacement law of blank hole for forming cylindraceous with bottom border by numerical simulation technology.

通过数值仿真研究了底孔圆筒形件成形后底孔变形规律,在此基础上建立了底孔圆筒形件成形后毛料中心孔变形规律经验公式。

The construction of boundary type cubature is a problem that has been noticed for a very long time in numerical integration.

边界型积公式是数值积分法研究向早就被注意问题。

"Half this number is less than 6 times the tens dight of the number by 4."

这个数值的它的十位数值的6陪小于4.

The IMPOWER(string) returns a complex number raised to a power.

IMPOWER(字符串;数值) 函数返回复数的幂。

The parameters of digifax is adjust by the reference of wind tunnel test result.

针对风洞实验的结果对数值模拟的各项参数设置行调整。

The Six Sigma Black Belt should be able to read values from a cumulative frequency ogive.

6西格玛黑应能从累计频次尖顶部读出数值。

A new method for predicting the motion of the hybrid monohull in regular wave is presented.

给出种考虑粘性影响的单体复合船型运动预报的数值方法。

The constraint condition for the strain energy density function of incompressible hyperelasticity is proposed.

通对各种有限元方法的分析较，适当修改了已有的应变能密度函数的形式使之更适合数值计算。

57. The Six Sigma Black Belt should be able to read values from a cumulative frequency ogive.

六西格玛黑应该能够从累计频次分布中读出数值。

If nonnumeric data is input, that read and any subsequent use of the stream will fail.

如果输入非数值型数据，这次的读入以及流的后续使用都将失败。

The gust-cascade interaction noise was numerically simulated using computational aeroacoustics by solving the two-dimensional linearized Euler equations.

采用计算气动声学方法求解二维线化欧拉方对阵风与叶栅的干涉噪声行了数值模拟。

The transient process that the axialflow in the centrifuge is established under a steady thermal driving isrevealed.

通数值求解得到了存在温度驱动情况下，离心机内形成小扰动流场的。

The fracturing process induced by different excavation sequence under final highwall with auger mining was numerically simulated.

对到界边坡下采用螺旋钻机开采煤柱不同开采顺序引起的破坏行了数值模拟。

Arff. which contains terms and numerical data sets for test mining weka.

这是个基于weka数据挖掘的实验测试数据集,格式为.arff,里面包含有名词性和数值型的数据集,用于weka挖掘测试.-This is a weka data mining based on the experimental data sets format.

It is calculated as half of the value of the sampling rate.Passing this level causes aliasing distortion, or foldover.

它的计算方法是将采样率除以二，超这个数值将会导致折叠失真，或称折叠。

The Distinct Element Method(DEM)is a discontinuum-based numerical method especially applicable to solve the discontinuity problems in jointed rock mass.

离散元法是基于不连续性假设的数值方法,它特别适合于求解节理岩体中的非连续性问题。

The two-dimensional axisymmetric subsonic-transonic-supersonic flow in an experimental arcjet thruster is simulated numerically using flux vector splitting method.

摘要对实验电弧加热式发动机二维轴对称亚跨超音速流动行了数值模拟，所采用的方法是矢通量分裂算法。

The cross-section curvature ductility ratio for R.C inequiaxial T-shaped, L-shaped and cress-shaped columns is calculated by numerical method.

摘要采用非线性全数值分析方法，计算了钢筋混凝土不等肢T形、L形和十字形柱截面模型在多种工况下的截面曲率延性。

The method simplifies the procedure of the trial function choice, and could be used in numerical calculation in geotechnique engineering.

该方法简化了试函数的选择，适用于岩土工中的各种数值计算。

Numerical simulations of laminar flow separation and reattachment occurred in an annular backstep passage are performed by the SIMPLER algorithm.

用SIMPLER算法对流环形后台阶通道内的层流分离和再附着行了数值模拟。

In the paper, study on displacement law of blank hole for forming cylindraceous with bottom border by numerical simulation technology.

通数值仿真研究了底孔的圆筒形件成形后底孔的变形规律,在此基础上建立了底孔的圆筒形件成形后毛料中心孔变形规律的经验公式。

The construction of boundary type cubature is a problem that has been noticed for a very long time in numerical integration.

边界型求积公式是数值积分法研究方向早就被注意的问题。