Research of the influences of Foam Expansion Ratio (FER) and the stability of foam to the cutterhead torque.

通过对验结果的分析,得出气泡稳定性以及发泡倍率对刀的影响规律。

Furthermore, the models for the analyses, such as pressure angle, curvature, kinetostatics, and input torque, of the mechanism are built.

且建立该凸轮构之各项特性分析的数学模式，包括压力角分析、曲率分析、运动静力分析，及推导系统输表示式。

A mechanics model of dynamometry bolt was given and it was shown that dynamometry bolt mainly bear tension and torque in real application.

给出巷道支护中测力锚杆的力学模型,指出测力锚杆实际应用中主要承受拉力、作用。

This paper introduces the torquemeter used in a testing laboratory of large-scale motor. The torquemeter with multidiameter axis meets both the requirement of measuring accuracy and universality.

本文对某大型验室在验过程中选用测量装置的情况进行介绍。该测量装置采用阶梯轴形式,对原装置进行改进,使之在满足测量精度的同时满足了测量量程较宽的要求。

Research of the influences of Foam Expansion Ratio (FER) and the stability of foam to the cutterhead torque.

通过对试验结果的分析,得出气泡稳定性以及发泡倍率对刀盘扭矩的影响规律。

Furthermore, the models for the analyses, such as pressure angle, curvature, kinetostatics, and input torque, of the mechanism are built.

且建立该凸轮机构之各项特性分析的数，包括压角分析、曲率分析、运动静分析，及推导系统输扭矩表示。

A mechanics model of dynamometry bolt was given and it was shown that dynamometry bolt mainly bear tension and torque in real application.

给出巷道支护中杆的型,指出杆实际应用中主要承受拉、扭矩作用。

This paper introduces the torquemeter used in a testing laboratory of large-scale motor. The torquemeter with multidiameter axis meets both the requirement of measuring accuracy and universality.

本文对某大型电机试验室在电机试验过程中选用扭矩量装置的情况进行介绍。该量装置采用阶梯轴形,对原装置进行改进,使之在满足量精度的同时满足了量量程较宽的要求。

Research of the influences of Foam Expansion Ratio (FER) and the stability of foam to the cutterhead torque.

过对试验结果的分析,得出气泡稳定性以及发泡倍率对刀盘扭矩的影响规律。

Furthermore, the models for the analyses, such as pressure angle, curvature, kinetostatics, and input torque, of the mechanism are built.

且建立凸轮机构之各项特性分析的数学模式，包括压力角分析、曲率分析、运动静力分析，及推导系统输扭矩表示式。

A mechanics model of dynamometry bolt was given and it was shown that dynamometry bolt mainly bear tension and torque in real application.

给出巷道支护中力锚杆的力学模型,指出力锚杆实际应用中主要承受拉力、扭矩作用。

This paper introduces the torquemeter used in a testing laboratory of large-scale motor. The torquemeter with multidiameter axis meets both the requirement of measuring accuracy and universality.

本文对某大型电机试验室在电机试验过程中选用扭矩量装置的情况进行介。量装置采用阶梯轴形式,对原装置进行改进,使之在满足量精度的同时满足了量量程较宽的要求。

Research of the influences of Foam Expansion Ratio (FER) and the stability of foam to the cutterhead torque.

通过对试验结果的分,得出气泡稳定性以及发泡倍率对刀盘扭矩的影响规律。

Furthermore, the models for the analyses, such as pressure angle, curvature, kinetostatics, and input torque, of the mechanism are built.

且建立该凸轮机构之各项特性分的数学模式，包括压力角分、曲率分、静力分，及推导系统输扭矩表示式。

A mechanics model of dynamometry bolt was given and it was shown that dynamometry bolt mainly bear tension and torque in real application.

给出巷道支力锚杆的力学模型,指出力锚杆实际应用主要承受拉力、扭矩作用。

This paper introduces the torquemeter used in a testing laboratory of large-scale motor. The torquemeter with multidiameter axis meets both the requirement of measuring accuracy and universality.

本文对某大型电机试验室在电机试验过程选用扭矩量装置的情况进行介绍。该量装置采用阶梯轴形式,对原装置进行改进,使之在满足量精度的同时满足了量量程较宽的要求。

Research of the influences of Foam Expansion Ratio (FER) and the stability of foam to the cutterhead torque.

通过对试验结果的分析,得出气泡稳定性以及发泡倍率对刀盘扭矩的影响规律。

Furthermore, the models for the analyses, such as pressure angle, curvature, kinetostatics, and input torque, of the mechanism are built.

且建立该凸轮机构之各项特性分析的数学模式，包括压力角分析、曲率分析、运动静力分析，及推导系统输扭矩表示式。

A mechanics model of dynamometry bolt was given and it was shown that dynamometry bolt mainly bear tension and torque in real application.

给出巷道支护中测力锚杆的力学模型,指出测力锚杆实际应用中主要承受拉力、扭矩作用。

This paper introduces the torquemeter used in a testing laboratory of large-scale motor. The torquemeter with multidiameter axis meets both the requirement of measuring accuracy and universality.

本文对某大型电机试验室在电机试验过程中选用扭矩测的情况进行介绍。该测采用阶梯轴形式,对原进行改进,使之在满足测精度的同时满足了测程较宽的要求。

Research of the influences of Foam Expansion Ratio (FER) and the stability of foam to the cutterhead torque.

通过对试验结果的分析,得出气泡稳定性以及发泡倍率对刀盘扭矩的影响规律。

Furthermore, the models for the analyses, such as pressure angle, curvature, kinetostatics, and input torque, of the mechanism are built.

且建立该凸轮机构之各项特性分析的数学模式，包括压力角分析、曲率分析、运动静力分析，及推导系统输扭矩表示式。

A mechanics model of dynamometry bolt was given and it was shown that dynamometry bolt mainly bear tension and torque in real application.

给出巷道支护中力锚杆的力学模型,指出力锚杆实际应用中主要承受拉力、扭矩作用。

This paper introduces the torquemeter used in a testing laboratory of large-scale motor. The torquemeter with multidiameter axis meets both the requirement of measuring accuracy and universality.

本文对某大型电机试验室在电机试验过程中选用扭矩置的情况进行介绍。该置采用阶梯轴形式,对原置进行改进,使之在满足精度的同时满足了程较宽的要求。

Research of the influences of Foam Expansion Ratio (FER) and the stability of foam to the cutterhead torque.

试验结果的分析,得出气泡稳定性以及发泡倍率刀盘扭矩的影响规律。

Furthermore, the models for the analyses, such as pressure angle, curvature, kinetostatics, and input torque, of the mechanism are built.

且建立该凸轮机构之各项特性分析的数学模式，包括压力角分析、曲率分析、运动静力分析，及推导系统输扭矩表示式。

A mechanics model of dynamometry bolt was given and it was shown that dynamometry bolt mainly bear tension and torque in real application.

给出巷道支护中测力锚杆的力学模型,指出测力锚杆实际应用中主要承受拉力、扭矩作用。

This paper introduces the torquemeter used in a testing laboratory of large-scale motor. The torquemeter with multidiameter axis meets both the requirement of measuring accuracy and universality.

本文某大型电机试验室在电机试验程中选用扭矩测量装置的情况进。该测量装置采用阶梯轴形式,原装置进改进,使之在满足测量精度的同时满足了测量量程较宽的要求。

Research of the influences of Foam Expansion Ratio (FER) and the stability of foam to the cutterhead torque.

通过对试验结果的分析,得出气泡稳定性以及发泡倍率对刀盘扭的影响规律。

Furthermore, the models for the analyses, such as pressure angle, curvature, kinetostatics, and input torque, of the mechanism are built.

且凸轮机构之各项特性分析的数学模式，包括压力角分析、曲率分析、运动静力分析，及推导系统输扭表示式。

A mechanics model of dynamometry bolt was given and it was shown that dynamometry bolt mainly bear tension and torque in real application.

给出巷道支护中测力锚杆的力学模型,指出测力锚杆实际应中主要承受拉力、扭。

This paper introduces the torquemeter used in a testing laboratory of large-scale motor. The torquemeter with multidiameter axis meets both the requirement of measuring accuracy and universality.

本文对某大型电机试验室在电机试验过程中选扭测量装置的情况进行介绍。测量装置采阶梯轴形式,对原装置进行改进,使之在满足测量精度的同时满足了测量量程较宽的要求。

Research of the influences of Foam Expansion Ratio (FER) and the stability of foam to the cutterhead torque.

通过对试验结果的分,气泡稳定性以及发泡倍率对刀盘扭的影响规律。

Furthermore, the models for the analyses, such as pressure angle, curvature, kinetostatics, and input torque, of the mechanism are built.

且建立该凸轮机构之各项特性分的数学模式，包括压力角分、曲率分、运动静力分，及推导系统输扭表示式。

A mechanics model of dynamometry bolt was given and it was shown that dynamometry bolt mainly bear tension and torque in real application.

给巷道支护中力锚杆的力学模型,指力锚杆实际应用中主要承受拉力、扭作用。

This paper introduces the torquemeter used in a testing laboratory of large-scale motor. The torquemeter with multidiameter axis meets both the requirement of measuring accuracy and universality.

本文对某大型电机试验室在电机试验过程中选用扭装置的情况进行介绍。该装置采用阶梯轴形式,对原装置进行改进,使之在满足精度的同时满足了程较宽的要求。