Scouring is essential, for it removes the natural grease in the fiber, the suint, dirt and dust.

洗涤工序十分必要的，因为昆工序可以除纤维上的天然油脂、脂汗和尘土。

The article has described the structure and working principle of multiprocess composite die for automobile deafener closure.

介绍了汽车消声器隔板多工序冲压复合模具的结构、工作原理。

The effect of sulphuring, vacuum treatment and soaking on the quality of candied apples was studied.

本文研究了苹果脯生中护色、抽空处理、浸渍等关键工序对品质量的影响。

Fully utilize of material atteched energy makes a rational tachnological process,take material potential energy in causticization process for example.

叙述苛化工序物料势能利用的能量计算过程、节能效果及一点体会。

Mazindol was synthesized by four steps from chlorobenzene and phthalic anhydride in an overall yield of 23.4%.

以氯苯和邻苯二甲酸酐为起始原料，经四步工序合成马吲哚，总收率为23．4％。

This machine is applicable to samming process before the drying processing in the vacuum, shaving and splitting processing course.

本机适用于猪、牛、羊在真空干燥，削匀，剖层前的挤水工序。

Next on its trip to becoming a lumber product, the debarked log is evaluated by scanners with "electronic eyes".

成为品之前的二道工序，原木由带电子眼的扫描仪进行评估。

Waste beer yeast polypeptides were made from waste beer yeast by bromidic hydrolyzation, separation, purification and dryness etc.

以啤酒废酵母为原料,经菠萝蛋白酶酶解、分离、纯化、干燥等工序制得啤酒废酵母活性肽。

The result shows that the microbe pollution of shrimp meat and headless and putamina and in grading is very serious.

头、壳挑腺肠和分级工序中细菌的污染比较严重。

Increasing technological application and innovation in manufacturing industries result in more specialisation and distribution of processes on a global scale.

制造业日益增加科技和创新意念的应用，使工序更趋专门精细和分散于全球。

The machine can be used with microprocess or controlled limistop motors or servc motors made in japan,South korea and china.

特别适用于缝制商标、口袋、袖子等工序，能惊醒高质量、高效率的缝纫作业。

Taking rotary screen stenciling as an example, stenciling technology in screening printing was interpreted, including the common defects and solutions.

介绍网印制版各工序的工艺特点,并以圆网为主要对象阐述了制版工艺,并分析常见疵病的原因,提出解决方法。

VD and working procedure.Experiments showed that major of the LF step foreign inclusions are aluminium sesquioxide. spotted non-deforming inclusion and sulphuret.

VD及成工序现场取样.系统分析了各工序中夹杂物的行为.特征.数量.变化历程及影响因素.实验结果表明.

Sulfide ores with BaSO4 as the main gangue , two kinds of slags , speiss and As-Cu alloy have been identified.

在还原熔炼中添加了砷矿物，冶炼的最终品砷铜合金，还原熔炼生的砷冰铜（黄渣）等副品中的铜通过返料操作在冰铜熔炼工序得以回收。

The paper mainly introduces the construction process, the design point, the process control method and the construction organization of concatemer silo slip form.

重点叙述多联体筒仓滑模施工工艺流程、滑模设计要点、关键工序控制方法、施工组织方法。

The whole technological process all realize low temperature, photophobic, asepsis, dust free, even the fresh melon is carried out a factory treatment process.

整体工艺流程全部实现了低温、避光、无菌、无尘，就连鲜瓜的处理工序都实行了工厂化。

Through the design and application of auto-deslagging unit,it solves many problems occurred in manual deslagging and ensure pipe ends expansion procedure go on smoothly.

通过自动管端除渣机的设计与应用,解决人工除渣存在的诸多问题,保证了管端扩径工序的顺利进行。

The technique character of the baffle of inspirator was introduced.A feasible process plan was determined and the integral piercing blanking bending forming die was designed.

介绍了呼吸器挡板零件工艺特点,确定了合理的工艺方案,设计1副落料、冲孔、压弯三道工序一次成形的模具。

In the compression moulding technology, preheat and prepressing procedures are added to improve the flowability of the bond and physical and mechanical properties of the product.

在压缩模塑工艺中，增加预热、预压工序，提高粘合剂的流动性和品的物理机械性能。

This paper discusses basic concept and sort of filoplume, analyses the cause that infecting filoplume of cashmere yarn, and puts forward control measure in working procedure.

论述了毛羽的基本概念和分类,对影响羊绒沙线毛羽的原因进行了分析,并对细沙前后各工序提出了具体控制措施。

Scouring is essential, for it removes the natural grease in the fiber, the suint, dirt and dust.

洗涤工序是十分必要的，因为昆工序可以除去纤维上的天然油脂、脂汗和尘土。

The article has described the structure and working principle of multiprocess composite die for automobile deafener closure.

介绍了汽车消声器隔板多工序冲压复合模具的结构、工作原理。

The effect of sulphuring, vacuum treatment and soaking on the quality of candied apples was studied.

究了苹果脯生产中护色、抽空处理、浸渍等关键工序对产品质量的影响。

Fully utilize of material atteched energy makes a rational tachnological process,take material potential energy in causticization process for example.

叙述苛化工序物料势能利用的能量计算过程、节能效果及一点体会。

Mazindol was synthesized by four steps from chlorobenzene and phthalic anhydride in an overall yield of 23.4%.

以氯苯和邻苯二甲酸酐为起始原料，经四步工序合成马吲哚，总收率为23．4％。

This machine is applicable to samming process before the drying processing in the vacuum, shaving and splitting processing course.

机适用于猪、牛、羊皮在真空干燥，削匀，剖层前的挤水工序。

Next on its trip to becoming a lumber product, the debarked log is evaluated by scanners with "electronic eyes".

成为锯材产品之前的二道工序是，去皮原木由带电子眼的扫描仪进行评估。

Waste beer yeast polypeptides were made from waste beer yeast by bromidic hydrolyzation, separation, purification and dryness etc.

以啤酒废酵母为原料,经菠萝蛋白酶酶解、分离、纯化、干燥等工序制得啤酒废酵母活性肽。

The result shows that the microbe pollution of shrimp meat and headless and putamina and in grading is very serious.

去头、去壳挑腺肠和分级工序中细菌的污染比较严重。

Increasing technological application and innovation in manufacturing industries result in more specialisation and distribution of processes on a global scale.

制造业日益增加科技和创新意念的应用，使工序更趋专门精细和分散于全球。

The machine can be used with microprocess or controlled limistop motors or servc motors made in japan,South korea and china.

特别适用于缝制、袋、袖子等工序，能惊醒高质量、高效率的缝纫作业。

Taking rotary screen stenciling as an example, stenciling technology in screening printing was interpreted, including the common defects and solutions.

介绍网印制版各工序的工艺特点,并以圆网为主要对象阐述了制版工艺,并分析常见疵病的原因,提出解决方法。

VD and working procedure.Experiments showed that major of the LF step foreign inclusions are aluminium sesquioxide. spotted non-deforming inclusion and sulphuret.

VD及成材工序现场取样.系统分析了各工序中夹杂物的行为.特征.数量.变化历程及影响因素.实验结果表明.

Sulfide ores with BaSO4 as the main gangue , two kinds of slags , speiss and As-Cu alloy have been identified.

在还原熔炼中添加了砷矿物，冶炼的最终产品是砷铜合金，还原熔炼产生的砷冰铜（黄渣）等副产品中的铜通过返料操作在冰铜熔炼工序得以回收。

The paper mainly introduces the construction process, the design point, the process control method and the construction organization of concatemer silo slip form.

重点叙述多联体筒仓滑模施工工艺流程、滑模设计要点、关键工序控制方法、施工组织方法。

The whole technological process all realize low temperature, photophobic, asepsis, dust free, even the fresh melon is carried out a factory treatment process.

整体工艺流程全部实现了低温、避光、无菌、无尘，就连鲜瓜的处理工序都实行了工厂化。

Through the design and application of auto-deslagging unit,it solves many problems occurred in manual deslagging and ensure pipe ends expansion procedure go on smoothly.

通过自动管端除渣机的设计与应用,解决人工除渣存在的诸多问题,保证了管端扩径工序的顺利进行。

The technique character of the baffle of inspirator was introduced.A feasible process plan was determined and the integral piercing blanking bending forming die was designed.

介绍了呼吸器挡板零件工艺特点,确定了合理的工艺方案,设计1副落料、冲孔、压弯三道工序一次成形的模具。

In the compression moulding technology, preheat and prepressing procedures are added to improve the flowability of the bond and physical and mechanical properties of the product.

在压缩模塑工艺中，增加预热、预压工序，提高粘合剂的流动性和产品的物理机械性能。

This paper discusses basic concept and sort of filoplume, analyses the cause that infecting filoplume of cashmere yarn, and puts forward control measure in working procedure.

论述了毛羽的基概念和分类,对影响羊绒沙线毛羽的原因进行了分析,并对细沙前后各工序提出了具体控制措施。

Scouring is essential, for it removes the natural grease in the fiber, the suint, dirt and dust.

洗涤工序是十必要的，因为昆工序可以除去纤维上的天然油脂、脂汗和尘土。

The article has described the structure and working principle of multiprocess composite die for automobile deafener closure.

介绍了汽车消声器隔板多工序冲压复合模具的结构、工作原理。

The effect of sulphuring, vacuum treatment and soaking on the quality of candied apples was studied.

本文研究了苹果脯生产中护、处理、浸渍等关键工序对产品质量的影响。

Fully utilize of material atteched energy makes a rational tachnological process,take material potential energy in causticization process for example.

叙述苛化工序物料势能利用的能量计算过程、节能效果及一点体会。

Mazindol was synthesized by four steps from chlorobenzene and phthalic anhydride in an overall yield of 23.4%.

以氯苯和邻苯二甲酸酐为起始原料，经四步工序合成马吲哚，总收率为23．4％。

This machine is applicable to samming process before the drying processing in the vacuum, shaving and splitting processing course.

本机适用猪、牛、羊皮在真干燥，削匀，剖层前的挤水工序。

Next on its trip to becoming a lumber product, the debarked log is evaluated by scanners with "electronic eyes".

成为锯材产品之前的二道工序是，去皮原木由带电子眼的扫描仪进行评估。

Waste beer yeast polypeptides were made from waste beer yeast by bromidic hydrolyzation, separation, purification and dryness etc.

以啤酒废酵母为原料,经菠萝蛋白酶酶解、离、纯化、干燥等工序制得啤酒废酵母活性肽。

The result shows that the microbe pollution of shrimp meat and headless and putamina and in grading is very serious.

去头、去壳挑腺肠和级工序中细菌的污染比较严重。

Increasing technological application and innovation in manufacturing industries result in more specialisation and distribution of processes on a global scale.

制造业日益增加科技和创新意念的应用，使工序更趋专门精细和全球。

The machine can be used with microprocess or controlled limistop motors or servc motors made in japan,South korea and china.

特别适用缝制商标、口袋、袖子等工序，能惊醒高质量、高效率的缝纫作业。

Taking rotary screen stenciling as an example, stenciling technology in screening printing was interpreted, including the common defects and solutions.

介绍网印制版各工序的工艺特点,并以圆网为主要对象阐述了制版工艺,并析常见疵病的原因,提出解决方法。

VD and working procedure.Experiments showed that major of the LF step foreign inclusions are aluminium sesquioxide. spotted non-deforming inclusion and sulphuret.

VD及成材工序现场取样.系统析了各工序中夹杂物的行为.特征.数量.变化历程及影响因素.实验结果表明.

Sulfide ores with BaSO4 as the main gangue , two kinds of slags , speiss and As-Cu alloy have been identified.

在还原熔炼中添加了砷矿物，冶炼的最终产品是砷铜合金，还原熔炼产生的砷冰铜（黄渣）等副产品中的铜通过返料操作在冰铜熔炼工序得以回收。

The paper mainly introduces the construction process, the design point, the process control method and the construction organization of concatemer silo slip form.

重点叙述多联体筒仓滑模施工工艺流程、滑模设计要点、关键工序控制方法、施工组织方法。

The whole technological process all realize low temperature, photophobic, asepsis, dust free, even the fresh melon is carried out a factory treatment process.

整体工艺流程全部实现了低温、避光、无菌、无尘，就连鲜瓜的处理工序都实行了工厂化。

Through the design and application of auto-deslagging unit,it solves many problems occurred in manual deslagging and ensure pipe ends expansion procedure go on smoothly.

通过自动管端除渣机的设计与应用,解决人工除渣存在的诸多问题,保证了管端扩径工序的顺利进行。

The technique character of the baffle of inspirator was introduced.A feasible process plan was determined and the integral piercing blanking bending forming die was designed.

介绍了呼吸器挡板零件工艺特点,确定了合理的工艺方案,设计1副落料、冲孔、压弯三道工序一次成形的模具。

In the compression moulding technology, preheat and prepressing procedures are added to improve the flowability of the bond and physical and mechanical properties of the product.

在压缩模塑工艺中，增加预热、预压工序，提高粘合剂的流动性和产品的物理机械性能。

This paper discusses basic concept and sort of filoplume, analyses the cause that infecting filoplume of cashmere yarn, and puts forward control measure in working procedure.

论述了毛羽的基本概念和类,对影响羊绒沙线毛羽的原因进行了析,并对细沙前后各工序提出了具体控制措施。

Scouring is essential, for it removes the natural grease in the fiber, the suint, dirt and dust.

洗涤工序是十分必要的，因为昆工序可以除去纤维上的天然油脂、脂汗尘土。

The article has described the structure and working principle of multiprocess composite die for automobile deafener closure.

介绍了汽车消声器隔板多工序冲压复合模具的结构、工作原理。

The effect of sulphuring, vacuum treatment and soaking on the quality of candied apples was studied.

本文研究了苹果脯生产中护色、抽空处理、浸渍等关键工序对产品质量的。

Fully utilize of material atteched energy makes a rational tachnological process,take material potential energy in causticization process for example.

述苛化工序物料势能利用的能量计算过程、节能效果及一点体会。

Mazindol was synthesized by four steps from chlorobenzene and phthalic anhydride in an overall yield of 23.4%.

以氯苯邻苯二甲酸酐为起始原料，经四步工序合成马吲哚，总收率为23．4％。

This machine is applicable to samming process before the drying processing in the vacuum, shaving and splitting processing course.

本机适用于猪、牛、羊皮在真空干燥，削匀，剖层前的挤水工序。

Next on its trip to becoming a lumber product, the debarked log is evaluated by scanners with "electronic eyes".

成为锯材产品之前的二道工序是，去皮原木由带电子眼的扫描仪进行评估。

Waste beer yeast polypeptides were made from waste beer yeast by bromidic hydrolyzation, separation, purification and dryness etc.

以啤酒废酵母为原料,经菠萝蛋白酶酶解、分离、纯化、干燥等工序制得啤酒废酵母活性肽。

The result shows that the microbe pollution of shrimp meat and headless and putamina and in grading is very serious.

去头、去壳挑腺肠分级工序中细菌的污染比较严重。

Increasing technological application and innovation in manufacturing industries result in more specialisation and distribution of processes on a global scale.

制造业日益增加科技意念的应用，使工序更趋专门精细分散于全球。

The machine can be used with microprocess or controlled limistop motors or servc motors made in japan,South korea and china.

特别适用于缝制商标、口袋、袖子等工序，能惊醒高质量、高效率的缝纫作业。

Taking rotary screen stenciling as an example, stenciling technology in screening printing was interpreted, including the common defects and solutions.

介绍网印制版各工序的工艺特点,并以圆网为主要对象阐述了制版工艺,并分析常见疵病的原因,提出解决方法。

VD and working procedure.Experiments showed that major of the LF step foreign inclusions are aluminium sesquioxide. spotted non-deforming inclusion and sulphuret.

VD及成材工序现场取样.系统分析了各工序中夹杂物的行为.特征.数量.变化历程及因素.实验结果表明.

Sulfide ores with BaSO4 as the main gangue , two kinds of slags , speiss and As-Cu alloy have been identified.

在还原熔炼中添加了砷矿物，冶炼的最终产品是砷铜合金，还原熔炼产生的砷冰铜（黄渣）等副产品中的铜通过返料操作在冰铜熔炼工序得以回收。

The paper mainly introduces the construction process, the design point, the process control method and the construction organization of concatemer silo slip form.

重点述多联体筒仓滑模施工工艺流程、滑模设计要点、关键工序控制方法、施工组织方法。

The whole technological process all realize low temperature, photophobic, asepsis, dust free, even the fresh melon is carried out a factory treatment process.

整体工艺流程全部实现了低温、避光、无菌、无尘，就连鲜瓜的处理工序都实行了工厂化。

Through the design and application of auto-deslagging unit,it solves many problems occurred in manual deslagging and ensure pipe ends expansion procedure go on smoothly.

通过自动管端除渣机的设计与应用,解决人工除渣存在的诸多问题,保证了管端扩径工序的顺利进行。

The technique character of the baffle of inspirator was introduced.A feasible process plan was determined and the integral piercing blanking bending forming die was designed.

介绍了呼吸器挡板零件工艺特点,确定了合理的工艺方案,设计1副落料、冲孔、压弯三道工序一次成形的模具。

In the compression moulding technology, preheat and prepressing procedures are added to improve the flowability of the bond and physical and mechanical properties of the product.

在压缩模塑工艺中，增加预热、预压工序，提高粘合剂的流动性产品的物理机械性能。

This paper discusses basic concept and sort of filoplume, analyses the cause that infecting filoplume of cashmere yarn, and puts forward control measure in working procedure.

论述了毛羽的基本概念分类,对羊绒沙线毛羽的原因进行了分析,并对细沙前后各工序提出了具体控制措施。

Scouring is essential, for it removes the natural grease in the fiber, the suint, dirt and dust.

洗涤工序是十分必要的，因昆工序可以除去的天然油脂、脂汗和尘土。

The article has described the structure and working principle of multiprocess composite die for automobile deafener closure.

介绍了汽车消声器隔板多工序冲压复合模具的结构、工作原理。

The effect of sulphuring, vacuum treatment and soaking on the quality of candied apples was studied.

本文研究了苹果脯生产中护色、抽空处理、浸渍等关键工序对产品质量的影响。

Fully utilize of material atteched energy makes a rational tachnological process,take material potential energy in causticization process for example.

叙述苛化工序物料势能利用的能量计算过程、节能效果及一点体会。

Mazindol was synthesized by four steps from chlorobenzene and phthalic anhydride in an overall yield of 23.4%.

以氯苯和邻苯二甲酸酐起始原料，经四步工序合成马吲哚，总收率23．4％。

This machine is applicable to samming process before the drying processing in the vacuum, shaving and splitting processing course.

本机适用于猪、牛、羊皮在真空干燥，削匀，剖层前的挤水工序。

Next on its trip to becoming a lumber product, the debarked log is evaluated by scanners with "electronic eyes".

成锯材产品之前的二道工序是，去皮原木由带电子眼的扫描仪进行评估。

Waste beer yeast polypeptides were made from waste beer yeast by bromidic hydrolyzation, separation, purification and dryness etc.

以啤酒废酵母原料,经菠萝蛋白酶酶解、分离、纯化、干燥等工序制得啤酒废酵母活性肽。

The result shows that the microbe pollution of shrimp meat and headless and putamina and in grading is very serious.

去头、去壳挑腺肠和分级工序中细菌的污染比较严重。

Increasing technological application and innovation in manufacturing industries result in more specialisation and distribution of processes on a global scale.

制造业日益增加科技和创新意念的应用，使工序更趋专门精细和分散于全球。

The machine can be used with microprocess or controlled limistop motors or servc motors made in japan,South korea and china.

特别适用于缝制商标、口袋、袖子等工序，能惊醒高质量、高效率的缝纫作业。

Taking rotary screen stenciling as an example, stenciling technology in screening printing was interpreted, including the common defects and solutions.

介绍印制版各工序的工艺特点,并以主要对象阐述了制版工艺,并分析常见疵病的原因,提出解决方法。

VD and working procedure.Experiments showed that major of the LF step foreign inclusions are aluminium sesquioxide. spotted non-deforming inclusion and sulphuret.

VD及成材工序现场取样.系统分析了各工序中夹杂物的行.特征.数量.变化历程及影响因素.实验结果表明.

Sulfide ores with BaSO4 as the main gangue , two kinds of slags , speiss and As-Cu alloy have been identified.

在还原熔炼中添加了砷矿物，冶炼的最终产品是砷铜合金，还原熔炼产生的砷冰铜（黄渣）等副产品中的铜通过返料操作在冰铜熔炼工序得以回收。

The paper mainly introduces the construction process, the design point, the process control method and the construction organization of concatemer silo slip form.

重点叙述多联体筒仓滑模施工工艺流程、滑模设计要点、关键工序控制方法、施工组织方法。

The whole technological process all realize low temperature, photophobic, asepsis, dust free, even the fresh melon is carried out a factory treatment process.

整体工艺流程全部实现了低温、避光、无菌、无尘，就连鲜瓜的处理工序都实行了工厂化。

Through the design and application of auto-deslagging unit,it solves many problems occurred in manual deslagging and ensure pipe ends expansion procedure go on smoothly.

通过自动管端除渣机的设计与应用,解决人工除渣存在的诸多问题,保证了管端扩径工序的顺利进行。

The technique character of the baffle of inspirator was introduced.A feasible process plan was determined and the integral piercing blanking bending forming die was designed.

介绍了呼吸器挡板零件工艺特点,确定了合理的工艺方案,设计1副落料、冲孔、压弯三道工序一次成形的模具。

In the compression moulding technology, preheat and prepressing procedures are added to improve the flowability of the bond and physical and mechanical properties of the product.

在压缩模塑工艺中，增加预热、预压工序，提高粘合剂的流动性和产品的物理机械性能。

This paper discusses basic concept and sort of filoplume, analyses the cause that infecting filoplume of cashmere yarn, and puts forward control measure in working procedure.

论述了毛羽的基本概念和分类,对影响羊绒沙线毛羽的原因进行了分析,并对细沙前后各工序提出了具体控制措施。

Scouring is essential, for it removes the natural grease in the fiber, the suint, dirt and dust.

洗涤工序是十分必要，因为昆工序可以除去纤维上天然油脂、脂汗和尘土。

The article has described the structure and working principle of multiprocess composite die for automobile deafener closure.

介绍了汽车消声器隔板多工序冲压复合模具结构、工作原理。

The effect of sulphuring, vacuum treatment and soaking on the quality of candied apples was studied.

本文研究了苹果脯生产中护色、抽空处理、浸渍等关键工序对产品质影响。

Fully utilize of material atteched energy makes a rational tachnological process,take material potential energy in causticization process for example.

叙述苛化工序物料势能利用能过程、节能效果及一点体会。

Mazindol was synthesized by four steps from chlorobenzene and phthalic anhydride in an overall yield of 23.4%.

以氯苯和邻苯二甲酸酐为起始原料，经四步工序合成马吲哚，总收率为23．4％。

This machine is applicable to samming process before the drying processing in the vacuum, shaving and splitting processing course.

本机适用于猪、牛、羊皮在真空干燥，削匀，剖层前挤水工序。

Next on its trip to becoming a lumber product, the debarked log is evaluated by scanners with "electronic eyes".

成为锯材产品之前二道工序是，去皮原木由带电子眼扫描仪进行评估。

Waste beer yeast polypeptides were made from waste beer yeast by bromidic hydrolyzation, separation, purification and dryness etc.

以啤酒废酵母为原料,经菠萝蛋白酶酶解、分离、纯化、干燥等工序制得啤酒废酵母活性肽。

The result shows that the microbe pollution of shrimp meat and headless and putamina and in grading is very serious.

去头、去壳挑腺肠和分级工序中细菌比较严重。

Increasing technological application and innovation in manufacturing industries result in more specialisation and distribution of processes on a global scale.

制造业日益增加科技和创新意念应用，使工序更趋专门精细和分散于全球。

The machine can be used with microprocess or controlled limistop motors or servc motors made in japan,South korea and china.

特别适用于缝制商标、口袋、袖子等工序，能惊醒高质、高效率缝纫作业。

Taking rotary screen stenciling as an example, stenciling technology in screening printing was interpreted, including the common defects and solutions.

介绍网印制版各工序工艺特点,并以圆网为主要对象阐述了制版工艺,并分析常见疵病原因,提出解决方法。

VD and working procedure.Experiments showed that major of the LF step foreign inclusions are aluminium sesquioxide. spotted non-deforming inclusion and sulphuret.

VD及成材工序现场取样.系统分析了各工序中夹杂物行为.特征.数.变化历程及影响因素.实验结果表明.

Sulfide ores with BaSO4 as the main gangue , two kinds of slags , speiss and As-Cu alloy have been identified.

在还原熔炼中添加了砷矿物，冶炼最终产品是砷铜合金，还原熔炼产生砷冰铜（黄渣）等副产品中铜通过返料操作在冰铜熔炼工序得以回收。

The paper mainly introduces the construction process, the design point, the process control method and the construction organization of concatemer silo slip form.

重点叙述多联体筒仓滑模施工工艺流程、滑模设要点、关键工序控制方法、施工组织方法。

The whole technological process all realize low temperature, photophobic, asepsis, dust free, even the fresh melon is carried out a factory treatment process.

整体工艺流程全部实现了低温、避光、无菌、无尘，就连鲜瓜处理工序都实行了工厂化。

Through the design and application of auto-deslagging unit,it solves many problems occurred in manual deslagging and ensure pipe ends expansion procedure go on smoothly.

通过自动管端除渣机设与应用,解决人工除渣存在诸多问题,保证了管端扩径工序顺利进行。

The technique character of the baffle of inspirator was introduced.A feasible process plan was determined and the integral piercing blanking bending forming die was designed.

介绍了呼吸器挡板零件工艺特点,确定了合理工艺方案,设1副落料、冲孔、压弯三道工序一次成形模具。

In the compression moulding technology, preheat and prepressing procedures are added to improve the flowability of the bond and physical and mechanical properties of the product.

在压缩模塑工艺中，增加预热、预压工序，提高粘合剂流动性和产品物理机械性能。

This paper discusses basic concept and sort of filoplume, analyses the cause that infecting filoplume of cashmere yarn, and puts forward control measure in working procedure.

论述了毛羽基本概念和分类,对影响羊绒沙线毛羽原因进行了分析,并对细沙前后各工序提出了具体控制措施。

Scouring is essential, for it removes the natural grease in the fiber, the suint, dirt and dust.

洗涤工序是十分必要的，为昆工序可以除去纤维上的天然油脂、脂汗和尘土。

The article has described the structure and working principle of multiprocess composite die for automobile deafener closure.

介绍了汽车消声器隔板多工序冲压复合模具的结构、工作原理。

The effect of sulphuring, vacuum treatment and soaking on the quality of candied apples was studied.

本文研究了苹果脯生产中护色、抽空处理、浸渍等关键工序对产品质量的影响。

Fully utilize of material atteched energy makes a rational tachnological process,take material potential energy in causticization process for example.

叙述苛化工序物料势能利用的能量计算过程、节能效果及一点体会。

Mazindol was synthesized by four steps from chlorobenzene and phthalic anhydride in an overall yield of 23.4%.

以氯苯和邻苯二甲酸酐为起始原料，经四步工序合成马吲哚，总收率为23．4％。

This machine is applicable to samming process before the drying processing in the vacuum, shaving and splitting processing course.

本机适用于猪、牛、羊皮在真空干燥，削匀，剖层前的挤水工序。

Next on its trip to becoming a lumber product, the debarked log is evaluated by scanners with "electronic eyes".

成为锯材产品之前的二道工序是，去皮原木由带电子眼的扫描仪进行评估。

Waste beer yeast polypeptides were made from waste beer yeast by bromidic hydrolyzation, separation, purification and dryness etc.

以啤酒废酵母为原料,经菠萝蛋白酶酶解、分离、纯化、干燥等工序制得啤酒废酵母活性肽。

The result shows that the microbe pollution of shrimp meat and headless and putamina and in grading is very serious.

去头、去壳挑腺肠和分级工序中细菌的污染比较严重。

Increasing technological application and innovation in manufacturing industries result in more specialisation and distribution of processes on a global scale.

制造业日益增加科技和创新意念的应用，使工序更趋专门精细和分散于全球。

The machine can be used with microprocess or controlled limistop motors or servc motors made in japan,South korea and china.

特别适用于缝制商标、口袋、袖子等工序，能惊醒高质量、高效率的缝纫作业。

Taking rotary screen stenciling as an example, stenciling technology in screening printing was interpreted, including the common defects and solutions.

介绍网印制版各工序的工艺特点,并以圆网为主要对象阐述了制版工艺,并分析常见疵病的原,解决方法。

VD and working procedure.Experiments showed that major of the LF step foreign inclusions are aluminium sesquioxide. spotted non-deforming inclusion and sulphuret.

VD及成材工序现场取样.系统分析了各工序中夹杂物的行为.特征.数量.变化历程及影响素.实验结果表明.

Sulfide ores with BaSO4 as the main gangue , two kinds of slags , speiss and As-Cu alloy have been identified.

在还原熔炼中添加了砷矿物，冶炼的最终产品是砷铜合金，还原熔炼产生的砷冰铜（黄渣）等副产品中的铜通过返料操作在冰铜熔炼工序得以回收。

The paper mainly introduces the construction process, the design point, the process control method and the construction organization of concatemer silo slip form.

重点叙述多联体筒仓滑模施工工艺流程、滑模设计要点、关键工序控制方法、施工组织方法。

The whole technological process all realize low temperature, photophobic, asepsis, dust free, even the fresh melon is carried out a factory treatment process.

整体工艺流程全部实现了低温、避光、无菌、无尘，就连鲜瓜的处理工序都实行了工厂化。

Through the design and application of auto-deslagging unit,it solves many problems occurred in manual deslagging and ensure pipe ends expansion procedure go on smoothly.

通过自动管端除渣机的设计与应用,解决人工除渣存在的诸多问题,保证了管端扩径工序的顺利进行。

The technique character of the baffle of inspirator was introduced.A feasible process plan was determined and the integral piercing blanking bending forming die was designed.

介绍了呼吸器挡板零件工艺特点,确定了合理的工艺方案,设计1副落料、冲孔、压弯三道工序一次成形的模具。

In the compression moulding technology, preheat and prepressing procedures are added to improve the flowability of the bond and physical and mechanical properties of the product.

在压缩模塑工艺中，增加预热、预压工序，高粘合剂的流动性和产品的物理机械性能。

This paper discusses basic concept and sort of filoplume, analyses the cause that infecting filoplume of cashmere yarn, and puts forward control measure in working procedure.

论述了毛羽的基本概念和分类,对影响羊绒沙线毛羽的原进行了分析,并对细沙前后各工序了具体控制措施。

Scouring is essential, for it removes the natural grease in the fiber, the suint, dirt and dust.

洗涤工序是十分必要的，因为昆工序可以除去纤维上的天然油脂、脂汗和尘。

The article has described the structure and working principle of multiprocess composite die for automobile deafener closure.

了汽车消声器隔板多工序冲压复合模具的结构、工作原理。

The effect of sulphuring, vacuum treatment and soaking on the quality of candied apples was studied.

本文研究了苹果脯生产中护色、抽空处理、浸渍等关键工序对产品质量的影响。

Fully utilize of material atteched energy makes a rational tachnological process,take material potential energy in causticization process for example.

叙述苛化工序物料势能利用的能量计算过程、节能效果及一点体会。

Mazindol was synthesized by four steps from chlorobenzene and phthalic anhydride in an overall yield of 23.4%.

以氯苯和邻苯二甲酸酐为起始原料，经四步工序合成马吲哚，总收率为23．4％。

This machine is applicable to samming process before the drying processing in the vacuum, shaving and splitting processing course.

本机适用于猪、牛、羊皮在真空干燥，削匀，剖层前的挤水工序。

Next on its trip to becoming a lumber product, the debarked log is evaluated by scanners with "electronic eyes".

成为锯材产品之前的二道工序是，去皮原木由带电子眼的扫描仪进行评估。

Waste beer yeast polypeptides were made from waste beer yeast by bromidic hydrolyzation, separation, purification and dryness etc.

以啤酒废酵母为原料,经菠萝蛋白酶酶解、分离、纯化、干燥等工序得啤酒废酵母活性肽。

The result shows that the microbe pollution of shrimp meat and headless and putamina and in grading is very serious.

去头、去壳挑腺肠和分级工序中细菌的污染比较严重。

Increasing technological application and innovation in manufacturing industries result in more specialisation and distribution of processes on a global scale.

造业日益增加科技和创新意念的应用，使工序更趋专门精细和分散于全球。

The machine can be used with microprocess or controlled limistop motors or servc motors made in japan,South korea and china.

特别适用于缝商标、口袋、袖子等工序，能惊醒高质量、高效率的缝纫作业。

Taking rotary screen stenciling as an example, stenciling technology in screening printing was interpreted, including the common defects and solutions.

网印版工序的工艺特点,并以圆网为主要对象阐述了版工艺,并分析常见疵病的原因,提出解决方法。

VD and working procedure.Experiments showed that major of the LF step foreign inclusions are aluminium sesquioxide. spotted non-deforming inclusion and sulphuret.

VD及成材工序现场取样.系统分析了工序中夹杂物的行为.特征.数量.变化历程及影响因素.实验结果表明.

Sulfide ores with BaSO4 as the main gangue , two kinds of slags , speiss and As-Cu alloy have been identified.

在还原熔炼中添加了砷矿物，冶炼的最终产品是砷铜合金，还原熔炼产生的砷冰铜（黄渣）等副产品中的铜通过返料操作在冰铜熔炼工序得以回收。

The paper mainly introduces the construction process, the design point, the process control method and the construction organization of concatemer silo slip form.

重点叙述多联体筒仓滑模施工工艺流程、滑模设计要点、关键工序控方法、施工组织方法。

The whole technological process all realize low temperature, photophobic, asepsis, dust free, even the fresh melon is carried out a factory treatment process.

整体工艺流程全部实现了低温、避光、无菌、无尘，就连鲜瓜的处理工序都实行了工厂化。

Through the design and application of auto-deslagging unit,it solves many problems occurred in manual deslagging and ensure pipe ends expansion procedure go on smoothly.

通过自动管端除渣机的设计与应用,解决人工除渣存在的诸多问题,保证了管端扩径工序的顺利进行。

The technique character of the baffle of inspirator was introduced.A feasible process plan was determined and the integral piercing blanking bending forming die was designed.

了呼吸器挡板零件工艺特点,确定了合理的工艺方案,设计1副落料、冲孔、压弯三道工序一次成形的模具。

In the compression moulding technology, preheat and prepressing procedures are added to improve the flowability of the bond and physical and mechanical properties of the product.

在压缩模塑工艺中，增加预热、预压工序，提高粘合剂的流动性和产品的物理机械性能。

This paper discusses basic concept and sort of filoplume, analyses the cause that infecting filoplume of cashmere yarn, and puts forward control measure in working procedure.

论述了毛羽的基本概念和分类,对影响羊绒沙线毛羽的原因进行了分析,并对细沙前后工序提出了具体控措施。

Scouring is essential, for it removes the natural grease in the fiber, the suint, dirt and dust.

洗涤工序是十分必要的，因为昆工序可以除去纤维上的天然油脂、脂汗和尘土。

The article has described the structure and working principle of multiprocess composite die for automobile deafener closure.

介绍了汽车消声器隔板多工序冲压复合模具的结构、工作原理。

The effect of sulphuring, vacuum treatment and soaking on the quality of candied apples was studied.

本文研究了苹果脯生产中护色、抽空处理、浸渍等关键工序对产品质量的影响。

Fully utilize of material atteched energy makes a rational tachnological process,take material potential energy in causticization process for example.

叙工序物料势能利用的能量计算过程、节能效果及一点体会。

Mazindol was synthesized by four steps from chlorobenzene and phthalic anhydride in an overall yield of 23.4%.

以氯苯和邻苯二甲酸酐为起始原料，经四步工序合成马吲哚，总收率为23．4％。

This machine is applicable to samming process before the drying processing in the vacuum, shaving and splitting processing course.

本机适用于猪、牛、羊皮在真空干燥，削匀，剖层前的挤水工序。

Next on its trip to becoming a lumber product, the debarked log is evaluated by scanners with "electronic eyes".

成为锯材产品之前的二道工序是，去皮原木由带电子眼的扫描仪进行评估。

Waste beer yeast polypeptides were made from waste beer yeast by bromidic hydrolyzation, separation, purification and dryness etc.

以啤酒废酵母为原料,经菠萝蛋白酶酶解、分离、纯、干燥等工序制得啤酒废酵母活性肽。

The result shows that the microbe pollution of shrimp meat and headless and putamina and in grading is very serious.

去头、去壳挑腺肠和分级工序中细菌的污染比较严重。

Increasing technological application and innovation in manufacturing industries result in more specialisation and distribution of processes on a global scale.

制造业日益增和创新意念的应用，使工序更趋专门精细和分散于全球。

The machine can be used with microprocess or controlled limistop motors or servc motors made in japan,South korea and china.

特别适用于缝制商标、口袋、袖子等工序，能惊醒高质量、高效率的缝纫作业。

Taking rotary screen stenciling as an example, stenciling technology in screening printing was interpreted, including the common defects and solutions.

介绍网印制版各工序的工艺特点,并以圆网为主要对象阐了制版工艺,并分析常见疵病的原因,提出解决方法。

VD and working procedure.Experiments showed that major of the LF step foreign inclusions are aluminium sesquioxide. spotted non-deforming inclusion and sulphuret.

VD及成材工序现场取样.系统分析了各工序中夹杂物的行为.特征.数量.变历程及影响因素.实验结果表明.

Sulfide ores with BaSO4 as the main gangue , two kinds of slags , speiss and As-Cu alloy have been identified.

在还原熔炼中添了砷矿物，冶炼的最终产品是砷铜合金，还原熔炼产生的砷冰铜（黄渣）等副产品中的铜通过返料操作在冰铜熔炼工序得以回收。

The paper mainly introduces the construction process, the design point, the process control method and the construction organization of concatemer silo slip form.

重点叙多联体筒仓滑模施工工艺流程、滑模设计要点、关键工序控制方法、施工组织方法。

The whole technological process all realize low temperature, photophobic, asepsis, dust free, even the fresh melon is carried out a factory treatment process.

整体工艺流程全部实现了低温、避光、无菌、无尘，就连鲜瓜的处理工序都实行了工厂。

Through the design and application of auto-deslagging unit,it solves many problems occurred in manual deslagging and ensure pipe ends expansion procedure go on smoothly.

通过自动管端除渣机的设计与应用,解决人工除渣存在的诸多问题,保证了管端扩径工序的顺利进行。

The technique character of the baffle of inspirator was introduced.A feasible process plan was determined and the integral piercing blanking bending forming die was designed.

介绍了呼吸器挡板零件工艺特点,确定了合理的工艺方案,设计1副落料、冲孔、压弯三道工序一次成形的模具。

In the compression moulding technology, preheat and prepressing procedures are added to improve the flowability of the bond and physical and mechanical properties of the product.

在压缩模塑工艺中，增预热、预压工序，提高粘合剂的流动性和产品的物理机械性能。

This paper discusses basic concept and sort of filoplume, analyses the cause that infecting filoplume of cashmere yarn, and puts forward control measure in working procedure.

论了毛羽的基本概念和分类,对影响羊绒沙线毛羽的原因进行了分析,并对细沙前后各工序提出了具体控制措施。

Scouring is essential, for it removes the natural grease in the fiber, the suint, dirt and dust.

洗涤工序必要的，因为昆工序可以除去纤维上的天然油脂、脂汗和尘土。

The article has described the structure and working principle of multiprocess composite die for automobile deafener closure.

介绍了汽车消声器隔板多工序冲压复合模具的结构、工作原理。

The effect of sulphuring, vacuum treatment and soaking on the quality of candied apples was studied.

本文研究了苹果脯生产中护色、抽空处理、浸渍等关键工序对产品质量的影响。

Fully utilize of material atteched energy makes a rational tachnological process,take material potential energy in causticization process for example.

叙述苛化工序物料势能利用的能量计算过程、节能效果及一点体会。

Mazindol was synthesized by four steps from chlorobenzene and phthalic anhydride in an overall yield of 23.4%.

以氯苯和邻苯二甲酸酐为起始原料，经四步工序合成马吲哚，总收率为23．4％。

This machine is applicable to samming process before the drying processing in the vacuum, shaving and splitting processing course.

本机适用于猪、牛、羊皮在真空干燥，削匀，剖层前的挤水工序。

Next on its trip to becoming a lumber product, the debarked log is evaluated by scanners with "electronic eyes".

成为锯材产品之前的二道工序，去皮原木由带电子眼的扫描仪进行评估。

Waste beer yeast polypeptides were made from waste beer yeast by bromidic hydrolyzation, separation, purification and dryness etc.

以啤酒废酵母为原料,经菠萝蛋白酶酶解、离、纯化、干燥等工序制得啤酒废酵母活性肽。

The result shows that the microbe pollution of shrimp meat and headless and putamina and in grading is very serious.

去头、去壳挑腺肠和级工序中细菌的污染比较严重。

Increasing technological application and innovation in manufacturing industries result in more specialisation and distribution of processes on a global scale.

制造业日益增加科技和创新意念的应用，使工序更趋专门精细和散于全球。

The machine can be used with microprocess or controlled limistop motors or servc motors made in japan,South korea and china.

特别适用于缝制商标、口袋、袖子等工序，能惊醒高质量、高效率的缝纫作业。

Taking rotary screen stenciling as an example, stenciling technology in screening printing was interpreted, including the common defects and solutions.

介绍网印制版各工序的工艺特点,并以圆网为主要对象阐述了制版工艺,并见疵病的原因,提出解决方法。

VD and working procedure.Experiments showed that major of the LF step foreign inclusions are aluminium sesquioxide. spotted non-deforming inclusion and sulphuret.

VD及成材工序现场取样.系统了各工序中夹杂物的行为.特征.数量.变化历程及影响因素.实验结果表明.

Sulfide ores with BaSO4 as the main gangue , two kinds of slags , speiss and As-Cu alloy have been identified.

在还原熔炼中添加了砷矿物，冶炼的最终产品砷铜合金，还原熔炼产生的砷冰铜（黄渣）等副产品中的铜通过返料操作在冰铜熔炼工序得以回收。

The paper mainly introduces the construction process, the design point, the process control method and the construction organization of concatemer silo slip form.

重点叙述多联体筒仓滑模施工工艺流程、滑模设计要点、关键工序控制方法、施工组织方法。

The whole technological process all realize low temperature, photophobic, asepsis, dust free, even the fresh melon is carried out a factory treatment process.

整体工艺流程全部实现了低温、避光、无菌、无尘，就连鲜瓜的处理工序都实行了工厂化。

Through the design and application of auto-deslagging unit,it solves many problems occurred in manual deslagging and ensure pipe ends expansion procedure go on smoothly.

通过自动管端除渣机的设计与应用,解决人工除渣存在的诸多问题,保证了管端扩径工序的顺利进行。

The technique character of the baffle of inspirator was introduced.A feasible process plan was determined and the integral piercing blanking bending forming die was designed.

介绍了呼吸器挡板零件工艺特点,确定了合理的工艺方案,设计1副落料、冲孔、压弯三道工序一次成形的模具。

In the compression moulding technology, preheat and prepressing procedures are added to improve the flowability of the bond and physical and mechanical properties of the product.

在压缩模塑工艺中，增加预热、预压工序，提高粘合剂的流动性和产品的物理机械性能。

This paper discusses basic concept and sort of filoplume, analyses the cause that infecting filoplume of cashmere yarn, and puts forward control measure in working procedure.

论述了毛羽的基本概念和类,对影响羊绒沙线毛羽的原因进行了,并对细沙前后各工序提出了具体控制措施。