The tectonic stress field in Tengchong volcano areas is oriented as NNE-NE-NEE, nearing horizontal compr essive stress field.

腾冲火山区构造应力场主要为北北东—北东—北东东向，接近水平的压应力场。

The residual stress formed on the surface of rolling bearing in superfinish hard turning will influence the fatigue life of rolling contacting after stress decay.

超精硬在滚动轴承表面形的残余压应力,经工作应力衰减后才为影响滚动接触疲劳寿命的应力状。

During two cooling methods, whether tension stress or compression stress, the retained austenite in steel reduced with stress increasing, had become from massive to streak or filminess.

在两种冷却方式下，应力还是压应力的作用，均使组织中残余奥氏体数量减少，形貌由无应力时的块状变为条状或薄膜状。

The tectonic stress field in Tengchong volcano areas is oriented as NNE-NE-NEE, nearing horizontal compr essive stress field.

腾冲火山区构造场主要为北北东—北东—北东东向，接近水平的压场。

The residual stress formed on the surface of rolling bearing in superfinish hard turning will influence the fatigue life of rolling contacting after stress decay.

态切削在滚动轴承表面形的残余压,经工作衰减后才为影响滚动接触疲劳寿命的状态。

During two cooling methods, whether tension stress or compression stress, the retained austenite in steel reduced with stress increasing, had become from massive to streak or filminess.

在两种冷却方式下，不论拉是压的作用，均使组织中残余奥氏体数量减少，形貌由无时的块状变为条状或薄膜状。

The tectonic stress field in Tengchong volcano areas is oriented as NNE-NE-NEE, nearing horizontal compr essive stress field.

腾冲火山区构造应力场主要为北北东—北东—北东东向，接近水平的压应力场。

The residual stress formed on the surface of rolling bearing in superfinish hard turning will influence the fatigue life of rolling contacting after stress decay.

超精硬态切削在滚动轴承表面形的残余压应力,经工作应力衰减后才为影响滚动接触疲劳寿命的应力态。

During two cooling methods, whether tension stress or compression stress, the retained austenite in steel reduced with stress increasing, had become from massive to streak or filminess.

在两种冷却方式下，不论拉应力还是压应力的作用，均使组织中残余奥氏体数量减少，形貌由无应力时的块变为条或薄膜。

The tectonic stress field in Tengchong volcano areas is oriented as NNE-NE-NEE, nearing horizontal compr essive stress field.

腾冲火山区构造力场主要为北北东—北东—北东东向，接近水平力场。

The residual stress formed on the surface of rolling bearing in superfinish hard turning will influence the fatigue life of rolling contacting after stress decay.

超精硬态切削在滚动轴承表面形残力,经工作力衰减后才为影响滚动接触疲劳寿力状态。

During two cooling methods, whether tension stress or compression stress, the retained austenite in steel reduced with stress increasing, had become from massive to streak or filminess.

在两种冷却方式下，不论拉力还是力作用，均使组织中残奥氏体数量减少，形貌由无力时块状变为条状或薄膜状。

The tectonic stress field in Tengchong volcano areas is oriented as NNE-NE-NEE, nearing horizontal compr essive stress field.

腾冲火山区构造应力场主要为北北东—北东—北东东向，接近水平的压应力场。

The residual stress formed on the surface of rolling bearing in superfinish hard turning will influence the fatigue life of rolling contacting after stress decay.

超精硬态切削在滚表面形的残余压应力,经工作应力衰减后才为影响滚接触疲劳寿命的应力状态。

During two cooling methods, whether tension stress or compression stress, the retained austenite in steel reduced with stress increasing, had become from massive to streak or filminess.

在两种式下，不论拉应力还是压应力的作用，均使组织中残余奥氏体数量减少，形貌由无应力时的块状变为条状或薄膜状。

The tectonic stress field in Tengchong volcano areas is oriented as NNE-NE-NEE, nearing horizontal compr essive stress field.

腾冲火山区构造应力场主要为北北东—北东—北东东向，接近水平的压应力场。

The residual stress formed on the surface of rolling bearing in superfinish hard turning will influence the fatigue life of rolling contacting after stress decay.

超精硬态切削在滚动面形的残余压应力,经工作应力衰减后才为影响滚动接触疲劳寿命的应力状态。

During two cooling methods, whether tension stress or compression stress, the retained austenite in steel reduced with stress increasing, had become from massive to streak or filminess.

在两方式下，不论拉应力还是压应力的作用，均使组织中残余奥氏体数量减少，形貌由无应力时的块状变为条状或薄膜状。

The tectonic stress field in Tengchong volcano areas is oriented as NNE-NE-NEE, nearing horizontal compr essive stress field.

腾冲火山区构造应力场主要为北北东—北东—北东东向，接近水平的压应力场。

The residual stress formed on the surface of rolling bearing in superfinish hard turning will influence the fatigue life of rolling contacting after stress decay.

超精硬态切削在滚动轴形的残余压应力,经工作应力衰减后才为影响滚动接触疲劳寿命的应力状态。

During two cooling methods, whether tension stress or compression stress, the retained austenite in steel reduced with stress increasing, had become from massive to streak or filminess.

在却方式下，不论拉应力还是压应力的作用，均使组织中残余奥氏体数量减少，形貌由无应力时的块状变为条状或薄膜状。

The tectonic stress field in Tengchong volcano areas is oriented as NNE-NE-NEE, nearing horizontal compr essive stress field.

腾冲火山区构造场主要为北北东—北东—北东东向，接近水平场。

The residual stress formed on the surface of rolling bearing in superfinish hard turning will influence the fatigue life of rolling contacting after stress decay.

超精硬态切削在滚动轴承表面形残余,经工作衰减后才为影响滚动接触疲劳寿命状态。

During two cooling methods, whether tension stress or compression stress, the retained austenite in steel reduced with stress increasing, had become from massive to streak or filminess.

在两种冷却方式下，不论拉还是作用，均使组织中残余奥氏体数量减少，形貌由无时块状变为条状或薄膜状。

The tectonic stress field in Tengchong volcano areas is oriented as NNE-NE-NEE, nearing horizontal compr essive stress field.

腾冲构造应场主要为北北东—北东—北东东向，接近水平压应场。

The residual stress formed on the surface of rolling bearing in superfinish hard turning will influence the fatigue life of rolling contacting after stress decay.

超精硬态切削在滚动轴承表面形残余压应,经工作应衰减后才为影响滚动接触疲劳寿命应状态。

During two cooling methods, whether tension stress or compression stress, the retained austenite in steel reduced with stress increasing, had become from massive to streak or filminess.

在两种冷却方式下，不论拉应还是压应作用，均使组织中残余奥氏体数量减少，形貌由无应块状变为条状或薄膜状。