The relative displacement between the front and retral loading location is emphasized.
着重研究了前后油缸加载点的相对位移。
The relative displacement between the front and retral loading location is emphasized.
着重研究了前后油缸加载点的相对位移。
Evaluations on the displacement of gnathion and gonion under different loads were made.
结果位移量与加载力值成系。
Otherwise, the plugin manager class will not be able to autoload your plugin!
否则,插件管理类插件管理类将不会自动加载你的插件!
The second is: increases the loading precision by designing high performable DSP controller.
特点二是设计高能的DSP控制器来提高加载精度。
Eli Martinez Jr. loads a wheelbarrow with wood that his family will burn in their two iron stoves which heat their house in Capulin.
礼小马丁内斯与木材加载在他们的两个铁,他的家人将独轮车火炉燃烧量他们在卡普林的房子。
Under the vertical loading condition, using three-dimension finite element analysis software investigated the stress of natural tooth, nichrome and rhotanium post inlay restoration teeth.
在垂直向加载的情况下,应用三维有限元分析软件分别对天然牙、镍铬合金、金钯合金带桩嵌体修复牙的应力进行分析。
Without assuming the form of unstrained state,the form of unstrained state corresponding to that of pre-stressed state can be obtained through this method directly.
该方法无需假定结构零状态几何,而次得到对应于初状态(即预应力态)几何的结构施工放样尺寸(即零状态几何),并通过分级加载对该方法的精度进行了检验。
If the class was loaded by the bootstrap class loader the set of packages loaded from CLASSPATH is searched to find the package of the class.
如果该类被引导类加载器装载,从CLASSPATH 中查找该类的包。
When this method is applied to the spiral bevel gears of an airplane engine, the results show that it is more reasonable than TCA and the precontrol method.
提出了种在初始设计阶段就
保证弧齿锥齿轮具有预期加载接触
能的主动设计方法,并将其用于某航空发动机中央传动弧齿锥齿轮的齿面综合。
声明:上例句、词
分类均由互联网资源自动生成,部分未经过人工审核,其表达内容亦不代表本软件的观点;若发现问题,欢迎向我们指正。
The relative displacement between the front and retral loading location is emphasized.
着重研究了前后油缸加载点的相对位移。
Evaluations on the displacement of gnathion and gonion under different loads were made.
结果位移量与加载力值成线性关系。
Otherwise, the plugin manager class will not be able to autoload your plugin!
否则,插件管理插件管理
会自动加载你的插件!
The second is: increases the loading precision by designing high performable DSP controller.
特点二是设计高性能的DSP控制器来提高加载精度。
Eli Martinez Jr. loads a wheelbarrow with wood that his family will burn in their two iron stoves which heat their house in Capulin.
礼小马丁内斯与木材加载在他们的两个铁,他的家人独轮车火炉燃烧
量他们在卡普林的房子。
Under the vertical loading condition, using three-dimension finite element analysis software investigated the stress of natural tooth, nichrome and rhotanium post inlay restoration teeth.
在垂直向加载的情况下,应用三维有限元分析软件分别对天然牙、镍铬合金、金钯合金带桩嵌体修复牙的应力进行分析。
Without assuming the form of unstrained state,the form of unstrained state corresponding to that of pre-stressed state can be obtained through this method directly.
法无需假定结构零状态几何,而可以一次得到对应于初状态(即预应力态)几何的结构施工放样尺寸(即零状态几何),并通过分级加载对
法的精度进行了检验。
If the class was loaded by the bootstrap class loader the set of packages loaded from CLASSPATH is searched to find the package of the class.
如果被引导
加载器装载,从CLASSPATH 中查找
的包。
When this method is applied to the spiral bevel gears of an airplane engine, the results show that it is more reasonable than TCA and the precontrol method.
提出了一种在初始设计阶段就可保证弧齿锥齿轮具有预期加载接触性能的主动设计法,并
其用于某航空发动机中央传动弧齿锥齿轮的齿面综合。
声明:以上例句、词性分均由互联网资源自动生成,部分未经过人工审核,其表达内容亦
代表本软件的观点;若发现问题,欢迎向我们指正。
The relative displacement between the front and retral loading location is emphasized.
着重研究了前后油缸加载点相对位移。
Evaluations on the displacement of gnathion and gonion under different loads were made.
结果位移量与加载力值成线关系。
Otherwise, the plugin manager class will not be able to autoload your plugin!
否则,插件管理类插件管理类将不会自动加载你插件!
The second is: increases the loading precision by designing high performable DSP controller.
特点二是设计高DSP控制器来提高加载精度。
Eli Martinez Jr. loads a wheelbarrow with wood that his family will burn in their two iron stoves which heat their house in Capulin.
礼小马丁内斯与木材加载在他们两个铁,他
家人将独轮车火炉燃烧
量他们在卡普林
房子。
Under the vertical loading condition, using three-dimension finite element analysis software investigated the stress of natural tooth, nichrome and rhotanium post inlay restoration teeth.
在垂直向加载情况下,应用三维有限元分析软件分别对天然牙、镍铬合
、
合
带桩嵌体修复牙
应力进行分析。
Without assuming the form of unstrained state,the form of unstrained state corresponding to that of pre-stressed state can be obtained through this method directly.
该方法无需假定结构零状态几何,而可以一次得到对应于初状态(即预应力态)几何结构施工放样尺寸(即零状态几何),并通过分级加载对该方法
精度进行了检验。
If the class was loaded by the bootstrap class loader the set of packages loaded from CLASSPATH is searched to find the package of the class.
如果该类被引导类加载器装载,从CLASSPATH 中查找该类包。
When this method is applied to the spiral bevel gears of an airplane engine, the results show that it is more reasonable than TCA and the precontrol method.
提出了一种在初始设计阶段就可保证弧齿锥齿轮具有预期加载接触主动设计方法,并将其用于某航空发动机中央传动弧齿锥齿轮
齿面综合。
声明:以上例句、词分类均由互联网资源自动生成,部分未经过人工审核,其表达内容亦不代表本软件
观点;若发现问题,欢迎向我们指正。
The relative displacement between the front and retral loading location is emphasized.
着重研究了前后油缸点的相
位移。
Evaluations on the displacement of gnathion and gonion under different loads were made.
结果位移量与值成线性关系。
Otherwise, the plugin manager class will not be able to autoload your plugin!
否则,插件管理类插件管理类将不会自动你的插件!
The second is: increases the loading precision by designing high performable DSP controller.
特点二是设计高性能的DSP控制器来提高精度。
Eli Martinez Jr. loads a wheelbarrow with wood that his family will burn in their two iron stoves which heat their house in Capulin.
礼小马丁内斯与木材在他们的两个铁,他的家人将独轮车火炉燃烧
量他们在卡普林的房子。
Under the vertical loading condition, using three-dimension finite element analysis software investigated the stress of natural tooth, nichrome and rhotanium post inlay restoration teeth.
在垂直向的情况下,
用三维有限元分析软件分别
天然牙、镍铬合金、金钯合金带桩嵌体修复牙的
进行分析。
Without assuming the form of unstrained state,the form of unstrained state corresponding to that of pre-stressed state can be obtained through this method directly.
该方法无需假定结构零状态几何,而可以一次得于初状态(即预
态)几何的结构施工放样尺寸(即零状态几何),并通过分级
该方法的精度进行了检验。
If the class was loaded by the bootstrap class loader the set of packages loaded from CLASSPATH is searched to find the package of the class.
如果该类被引导类器装
,从CLASSPATH 中查找该类的包。
When this method is applied to the spiral bevel gears of an airplane engine, the results show that it is more reasonable than TCA and the precontrol method.
提出了一种在初始设计阶段就可保证弧齿锥齿轮具有预期接触性能的主动设计方法,并将其用于某航空发动机中央传动弧齿锥齿轮的齿面综合。
声明:以上例句、词性分类均由互联网资源自动生成,部分未经过人工审核,其表达内容亦不代表本软件的观点;若发现问题,欢迎向我们指正。
The relative displacement between the front and retral loading location is emphasized.
着重研究了前后油缸加载点的相对位移。
Evaluations on the displacement of gnathion and gonion under different loads were made.
结果位移量与加载力值成线性关系。
Otherwise, the plugin manager class will not be able to autoload your plugin!
否则,插件管理类插件管理类将不会自动加载你的插件!
The second is: increases the loading precision by designing high performable DSP controller.
特点二是设计高性能的DSP控制器来提高加载精度。
Eli Martinez Jr. loads a wheelbarrow with wood that his family will burn in their two iron stoves which heat their house in Capulin.
礼小马丁内斯与木材加载在他们的两个铁,他的家人将独轮车火炉燃烧量他们在卡普林的房子。
Under the vertical loading condition, using three-dimension finite element analysis software investigated the stress of natural tooth, nichrome and rhotanium post inlay restoration teeth.
在垂直向加载的情况下,应用三维有限元分析软件分别对天然牙、镍铬合金、金钯合金带桩嵌体修复牙的应力进行分析。
Without assuming the form of unstrained state,the form of unstrained state corresponding to that of pre-stressed state can be obtained through this method directly.
该方法无需假定结构零状态几,而可以一次得到对应于初状态(即预应力态)几
的结构施工放样尺寸(即零状态几
),
过分级加载对该方法的精度进行了检验。
If the class was loaded by the bootstrap class loader the set of packages loaded from CLASSPATH is searched to find the package of the class.
如果该类被引导类加载器装载,从CLASSPATH 中查找该类的包。
When this method is applied to the spiral bevel gears of an airplane engine, the results show that it is more reasonable than TCA and the precontrol method.
提出了一种在初始设计阶段就可保证弧齿锥齿轮具有预期加载接触性能的主动设计方法,将其用于某航空发动机中央传动弧齿锥齿轮的齿面综合。
声明:以上句、词性分类均由互联网资源自动生成,部分未经过人工审核,其表达内容亦不代表本软件的观点;若发现问题,欢迎向我们指正。
The relative displacement between the front and retral loading location is emphasized.
着重研究了前后油缸加点的相
位移。
Evaluations on the displacement of gnathion and gonion under different loads were made.
结果位移量与加成线性关系。
Otherwise, the plugin manager class will not be able to autoload your plugin!
否则,插件管理类插件管理类将不会自动加你的插件!
The second is: increases the loading precision by designing high performable DSP controller.
特点二是设计高性能的DSP控制器来提高加精度。
Eli Martinez Jr. loads a wheelbarrow with wood that his family will burn in their two iron stoves which heat their house in Capulin.
礼小马丁内斯与木材加在他们的两个铁,他的家人将独轮车火炉燃烧
量他们在卡普林的房子。
Under the vertical loading condition, using three-dimension finite element analysis software investigated the stress of natural tooth, nichrome and rhotanium post inlay restoration teeth.
在垂直向加的情况下,应用三维有限元分析软件分别
天然牙、镍铬合金、金钯合金带桩嵌体修复牙的应
进行分析。
Without assuming the form of unstrained state,the form of unstrained state corresponding to that of pre-stressed state can be obtained through this method directly.
该方法无需假定结构零状态几何,而可以一次应于初状态(即预应
态)几何的结构施工放样尺寸(即零状态几何),并通过分级加
该方法的精度进行了检验。
If the class was loaded by the bootstrap class loader the set of packages loaded from CLASSPATH is searched to find the package of the class.
如果该类被引导类加器装
,从CLASSPATH 中查找该类的包。
When this method is applied to the spiral bevel gears of an airplane engine, the results show that it is more reasonable than TCA and the precontrol method.
提出了一种在初始设计阶段就可保证弧齿锥齿轮具有预期加接触性能的主动设计方法,并将其用于某航空发动机中央传动弧齿锥齿轮的齿面综合。
声明:以上例句、词性分类均由互联网资源自动生成,部分未经过人工审核,其表达内容亦不代表本软件的观点;若发现问题,欢迎向我们指正。
The relative displacement between the front and retral loading location is emphasized.
着重研究了前后油缸加载点相对位移。
Evaluations on the displacement of gnathion and gonion under different loads were made.
结果位移量与加载力值成线性关系。
Otherwise, the plugin manager class will not be able to autoload your plugin!
否则,插件管理类插件管理类不会自动加载你
插件!
The second is: increases the loading precision by designing high performable DSP controller.
特点二是设计高性能DSP控制器来提高加载精度。
Eli Martinez Jr. loads a wheelbarrow with wood that his family will burn in their two iron stoves which heat their house in Capulin.
礼小马丁内斯与木材加载在他们两个铁,他
独轮车火炉燃烧
量他们在卡普林
。
Under the vertical loading condition, using three-dimension finite element analysis software investigated the stress of natural tooth, nichrome and rhotanium post inlay restoration teeth.
在垂直向加载情况下,应用三维有限元分析软件分别对天然牙、镍铬合金、金钯合金带桩嵌体修复牙
应力进行分析。
Without assuming the form of unstrained state,the form of unstrained state corresponding to that of pre-stressed state can be obtained through this method directly.
该方法无需假定结构零状态几何,而可以一次得到对应于初状态(即预应力态)几何结构施工放样尺寸(即零状态几何),并通过分级加载对该方法
精度进行了检验。
If the class was loaded by the bootstrap class loader the set of packages loaded from CLASSPATH is searched to find the package of the class.
如果该类被引导类加载器装载,从CLASSPATH 中查找该类包。
When this method is applied to the spiral bevel gears of an airplane engine, the results show that it is more reasonable than TCA and the precontrol method.
提出了一种在初始设计阶段就可保证弧齿锥齿轮具有预期加载接触性能主动设计方法,并
其用于某航空发动机中央传动弧齿锥齿轮
齿面综合。
声明:以上例句、词性分类均由互联网资源自动生成,部分未经过工审核,其表达内容亦不代表本软件
观点;若发现问题,欢迎向我们指正。
The relative displacement between the front and retral loading location is emphasized.
着重研究了前后油缸加载点相对位移。
Evaluations on the displacement of gnathion and gonion under different loads were made.
结果位移量与加载力值成线性关系。
Otherwise, the plugin manager class will not be able to autoload your plugin!
否则,插件管理类插件管理类将不会自动加载你插件!
The second is: increases the loading precision by designing high performable DSP controller.
特点二是设计高性能DSP控制器来提高加载精度。
Eli Martinez Jr. loads a wheelbarrow with wood that his family will burn in their two iron stoves which heat their house in Capulin.
礼小马丁内斯与木材加载们
两个铁,
人将独轮车火炉燃烧
量
们
卡普林
房
。
Under the vertical loading condition, using three-dimension finite element analysis software investigated the stress of natural tooth, nichrome and rhotanium post inlay restoration teeth.
直向加载
情况下,应用三维有限元分析软件分别对天然牙、镍铬合金、金钯合金带桩嵌体修复牙
应力进行分析。
Without assuming the form of unstrained state,the form of unstrained state corresponding to that of pre-stressed state can be obtained through this method directly.
该方法无需假定结构零状态几何,而可以一次得到对应于初状态(即预应力态)几何结构施工放样尺寸(即零状态几何),并通过分级加载对该方法
精度进行了检验。
If the class was loaded by the bootstrap class loader the set of packages loaded from CLASSPATH is searched to find the package of the class.
如果该类被引导类加载器装载,从CLASSPATH 中查找该类包。
When this method is applied to the spiral bevel gears of an airplane engine, the results show that it is more reasonable than TCA and the precontrol method.
提出了一种初始设计阶段就可保证弧齿锥齿轮具有预期加载接触性能
主动设计方法,并将其用于某航空发动机中央传动弧齿锥齿轮
齿面综合。
声明:以上例句、词性分类均由互联网资源自动生成,部分未经过人工审核,其表达内容亦不代表本软件观点;若发现问题,欢迎向我们指正。
The relative displacement between the front and retral loading location is emphasized.
着重研究了前后油缸相对位移。
Evaluations on the displacement of gnathion and gonion under different loads were made.
果位移量与
力值成线性关系。
Otherwise, the plugin manager class will not be able to autoload your plugin!
否则,插件管理类插件管理类将不会自动你
插件!
The second is: increases the loading precision by designing high performable DSP controller.
特二是设计高性能
DSP控制器来提高
精度。
Eli Martinez Jr. loads a wheelbarrow with wood that his family will burn in their two iron stoves which heat their house in Capulin.
礼小马丁内斯与木材在他们
两个铁,他
家人将独轮车火炉燃烧
量他们在卡普林
房子。
Under the vertical loading condition, using three-dimension finite element analysis software investigated the stress of natural tooth, nichrome and rhotanium post inlay restoration teeth.
在垂直向情况下,应用三维有限元分析软件分别对天然牙、镍铬合金、金钯合金带桩嵌体修复牙
应力进行分析。
Without assuming the form of unstrained state,the form of unstrained state corresponding to that of pre-stressed state can be obtained through this method directly.
该方法无需假定零状态几何,而可以一次得到对应于初状态(即预应力态)几何
施工放样尺寸(即零状态几何),并通过分级
对该方法
精度进行了检验。
If the class was loaded by the bootstrap class loader the set of packages loaded from CLASSPATH is searched to find the package of the class.
如果该类被引导类器装
,从CLASSPATH 中查找该类
包。
When this method is applied to the spiral bevel gears of an airplane engine, the results show that it is more reasonable than TCA and the precontrol method.
提出了一种在初始设计阶段就可保证弧齿锥齿轮具有预期接触性能
主动设计方法,并将其用于某航空发动机中央传动弧齿锥齿轮
齿面综合。
声明:以上例句、词性分类均由互联网资源自动生成,部分未经过人工审核,其表达内容亦不代表本软件观
;若发现问题,欢迎向我们指正。