Using PMK programing controler simulates of the process control system and corrects parameter of controler in extractive tower.
利用PMK可编程调节器实现过程控制系统的,并
调节器进行参数整定。
Using PMK programing controler simulates of the process control system and corrects parameter of controler in extractive tower.
利用PMK可编程调节器实现过程控制系统的,并
调节器进行参数整定。
A new clue for architectural CAD and software design is proposed during the developing procedure, which is called three-moduler-in-one method.
在系统研制中,提出并实现了集建筑建模器-结构分析器-演示器于
体的三器
体化的建筑工程辅助设计和软件开发思路。
Finally, the optimization quantity of spare parts following exponential distribution are calculated with both this method and analysable method.The two results fit well.
最后利用数分布实例
解析
法和
法计算出的结果进行比较,从而
所提出的
法进行了检验。
As the most important component of automobilism simulator, the newgenerated real-time visual system is a completely new visual simulation and scene management system.
作为汽车驾驶模拟器的重要组成部分,汽车驾驶模拟器新代实时视景系统是
全新的视景
和场景管理系统。
Computer simulation demonstrate that the proposed algorithm can adapt to the identification of several different kinds of fabric as woven, stockinet, damask and mesh fabric.
通过机织布、针织布、斜纹布和网眼布等不同种类织物的
验证了该算法的有效性和适应性。
In order to adapt to real time simulation, the nodes of system and the predigestion was made according to the characteristic of reactor coolant system which will be simulated.
本论文针要
的冷却剂系统的特点,
系统进行了节点划分,并做了适当简化,以使其适应实时
的需要。
The dynamic equation of the transient response in a cracked rotor system was modelled, the numerical simulation solutions of the uncracked rotor and the cracked rotor were obtained.
摘要基于建立的裂纹转子瞬态回应动力学模型,得到了有无裂纹转子的数值解。
The effect of the mesh density, the change of dynamic plasticity property of mild steel with strain rate and the spotweld mechanical property on the simulation results is analyzed.
分析了网格密度、身用低碳钢材料塑性特性随应变率的变化及焊点力学特性因素结果的影响。
声明:以上例句、词性分类均由互联网资源自动生成,部分未经过人工审核,其表达内容亦不代表本软件的观点;若发现问题,欢迎向我们正。
Using PMK programing controler simulates of the process control system and corrects parameter of controler in extractive tower.
利用PMK可编程调节器实现过程控制系统的仿真,并调节器进行参数整定。
A new clue for architectural CAD and software design is proposed during the developing procedure, which is called three-moduler-in-one method.
在系统研制中,提出并实现了集建筑建模器-结构分析器-仿真演示器于一体的三器一体化的建筑工程辅助和软件开发思路。
Finally, the optimization quantity of spare parts following exponential distribution are calculated with both this method and analysable method.The two results fit well.
最后利用一个指数分布实例解析方法和仿真方法
算出的结果进行比较,
所提出的仿真方法进行了检验。
As the most important component of automobilism simulator, the newgenerated real-time visual system is a completely new visual simulation and scene management system.
作为汽车驾驶模拟器的重要组成部分,汽车驾驶模拟器新一代实时视景系统是一个全新的视景仿真和场景管理系统。
Computer simulation demonstrate that the proposed algorithm can adapt to the identification of several different kinds of fabric as woven, stockinet, damask and mesh fabric.
通过机织布、针织布、斜纹布和网眼布等不同种类织物的仿真验证了该算法的有效性和适应性。
In order to adapt to real time simulation, the nodes of system and the predigestion was made according to the characteristic of reactor coolant system which will be simulated.
本论文针要仿真的冷却剂系统的特点,
系统进行了节点划分,并做了适当简化,以使其适应实时仿真的需要。
The dynamic equation of the transient response in a cracked rotor system was modelled, the numerical simulation solutions of the uncracked rotor and the cracked rotor were obtained.
摘要基于建立的裂纹转子瞬态回应动力学模型,得到了有无裂纹转子的数值仿真解。
The effect of the mesh density, the change of dynamic plasticity property of mild steel with strain rate and the spotweld mechanical property on the simulation results is analyzed.
分析了网格密度、身用低碳钢材料塑性特性随应变率的变化及焊点力学特性因素仿真结果的影响。
声明:以上例句、词性分类均由互联网资源自动生成,部分未经过人工审核,其表达内容亦不代表本软件的观点;若发现问题,欢迎向我们指正。
Using PMK programing controler simulates of the process control system and corrects parameter of controler in extractive tower.
利用PMK可编程调节实现过程控制系统的仿真,并
调节
进行参数整定。
A new clue for architectural CAD and software design is proposed during the developing procedure, which is called three-moduler-in-one method.
在系统研制中,提出并实现了集建筑建-
构分析
-仿真演示
于一体的三
一体化的建筑工程辅助设计和软件开发思路。
Finally, the optimization quantity of spare parts following exponential distribution are calculated with both this method and analysable method.The two results fit well.
最后利用一个指数分布实例解析方法和仿真方法计算出的
果进行比较,从而
所提出的仿真方法进行了检验。
As the most important component of automobilism simulator, the newgenerated real-time visual system is a completely new visual simulation and scene management system.
作为汽车驾驶拟
的重
部分,汽车驾驶
拟
新一代实时视景系统是一个全新的视景仿真和场景管理系统。
Computer simulation demonstrate that the proposed algorithm can adapt to the identification of several different kinds of fabric as woven, stockinet, damask and mesh fabric.
通过机织布、针织布、斜纹布和网眼布等不同种类织物的仿真验证了该算法的有效性和适应性。
In order to adapt to real time simulation, the nodes of system and the predigestion was made according to the characteristic of reactor coolant system which will be simulated.
本论文针仿真的冷却剂系统的特点,
系统进行了节点划分,并做了适当简化,以使其适应实时仿真的需
。
The dynamic equation of the transient response in a cracked rotor system was modelled, the numerical simulation solutions of the uncracked rotor and the cracked rotor were obtained.
摘基于建立的裂纹转子瞬态回应动力学
型,得到了有无裂纹转子的数值仿真解。
The effect of the mesh density, the change of dynamic plasticity property of mild steel with strain rate and the spotweld mechanical property on the simulation results is analyzed.
分析了网格密度、身用低碳钢材料塑性特性随应变率的变化及焊点力学特性因素仿真
果的影响。
声明:以上例句、词性分类均由互联网资源自动生,部分未经过人工审核,其表达内容亦不代表本软件的观点;若发现问题,欢迎向我们指正。
Using PMK programing controler simulates of the process control system and corrects parameter of controler in extractive tower.
PMK
编程调节器实现过程控制系统的仿真,并
调节器进行参数整定。
A new clue for architectural CAD and software design is proposed during the developing procedure, which is called three-moduler-in-one method.
在系统研制中,提出并实现了集建筑建模器-结构分析器-仿真演示器于一体的三器一体化的建筑工程辅助设计和软件开发思路。
Finally, the optimization quantity of spare parts following exponential distribution are calculated with both this method and analysable method.The two results fit well.
最后一个指数分
实例
解析方法和仿真方法计算出的结果进行比较,从而
所提出的仿真方法进行了检验。
As the most important component of automobilism simulator, the newgenerated real-time visual system is a completely new visual simulation and scene management system.
作为汽车驾驶模拟器的重要组成部分,汽车驾驶模拟器新一代实时视景系统是一个全新的视景仿真和场景管理系统。
Computer simulation demonstrate that the proposed algorithm can adapt to the identification of several different kinds of fabric as woven, stockinet, damask and mesh fabric.
通过机织
、针织
、
和网眼
等不同种类织物的仿真验证了该算法的有效性和适应性。
In order to adapt to real time simulation, the nodes of system and the predigestion was made according to the characteristic of reactor coolant system which will be simulated.
本论文针要仿真的冷却剂系统的特点,
系统进行了节点划分,并做了适当简化,以使其适应实时仿真的需要。
The dynamic equation of the transient response in a cracked rotor system was modelled, the numerical simulation solutions of the uncracked rotor and the cracked rotor were obtained.
摘要基于建立的裂转子瞬态回应动力学模型,得到了有无裂
转子的数值仿真解。
The effect of the mesh density, the change of dynamic plasticity property of mild steel with strain rate and the spotweld mechanical property on the simulation results is analyzed.
分析了网格密度、身低碳钢材料塑性特性随应变率的变化及焊点力学特性因素
仿真结果的影响。
声明:以上例句、词性分类均由互联网资源自动生成,部分未经过人工审核,其表达内容亦不代表本软件的观点;若发现问题,欢迎向我们指正。
Using PMK programing controler simulates of the process control system and corrects parameter of controler in extractive tower.
利用PMK可编程调节器实现过程控制系统的仿真,并调节器进行参数整定。
A new clue for architectural CAD and software design is proposed during the developing procedure, which is called three-moduler-in-one method.
在系统研制中,提出并实现了集模器-结构
析器-仿真演示器于一体的三器一体化的
工程辅助设计和软件开发思路。
Finally, the optimization quantity of spare parts following exponential distribution are calculated with both this method and analysable method.The two results fit well.
最后利用一个指数布实例
解析方法和仿真方法计算出的结果进行比较,从而
所提出的仿真方法进行了检验。
As the most important component of automobilism simulator, the newgenerated real-time visual system is a completely new visual simulation and scene management system.
作为车驾驶模拟器的重要组成
,
车驾驶模拟器新一代实时视景系统是一个全新的视景仿真和场景管理系统。
Computer simulation demonstrate that the proposed algorithm can adapt to the identification of several different kinds of fabric as woven, stockinet, damask and mesh fabric.
通过机织布、针织布、斜纹布和网眼布等不同种类织物的仿真验证了该算法的有效性和适应性。
In order to adapt to real time simulation, the nodes of system and the predigestion was made according to the characteristic of reactor coolant system which will be simulated.
本论文针要仿真的冷却剂系统的特点,
系统进行了节点划
,并做了适当简化,以使其适应实时仿真的需要。
The dynamic equation of the transient response in a cracked rotor system was modelled, the numerical simulation solutions of the uncracked rotor and the cracked rotor were obtained.
摘要基于立的裂纹转子瞬态回应动力学模型,得到了有无裂纹转子的数值仿真解。
The effect of the mesh density, the change of dynamic plasticity property of mild steel with strain rate and the spotweld mechanical property on the simulation results is analyzed.
析了网格密度、身用低碳钢材料塑性特性随应变率的变化及焊点力学特性因素
仿真结果的影响。
声明:以上例句、词性类均由互联网资源自动生成,
未经过人工审核,其表达内容亦不代表本软件的观点;若发现问题,欢迎向我们指正。
Using PMK programing controler simulates of the process control system and corrects parameter of controler in extractive tower.
利用PMK可编程调节实现过程控制系统的仿真,并
调节
进行参数整定。
A new clue for architectural CAD and software design is proposed during the developing procedure, which is called three-moduler-in-one method.
在系统研制中,提出并实现了集建筑建模-结构分析
-仿真演
一体的三
一体化的建筑工程辅助设计和软件开发思路。
Finally, the optimization quantity of spare parts following exponential distribution are calculated with both this method and analysable method.The two results fit well.
最后利用一个指数分布实例解析方法和仿真方法计算出的结果进行比较,从而
所提出的仿真方法进行了检验。
As the most important component of automobilism simulator, the newgenerated real-time visual system is a completely new visual simulation and scene management system.
作驾驶模拟
的重要组成部分,
驾驶模拟
新一代实时视景系统是一个全新的视景仿真和场景管理系统。
Computer simulation demonstrate that the proposed algorithm can adapt to the identification of several different kinds of fabric as woven, stockinet, damask and mesh fabric.
通过机织布、针织布、斜纹布和网眼布等不同种类织物的仿真验证了该算法的有效性和适应性。
In order to adapt to real time simulation, the nodes of system and the predigestion was made according to the characteristic of reactor coolant system which will be simulated.
本论文针要仿真的冷却剂系统的特点,
系统进行了节点划分,并做了适当简化,以使其适应实时仿真的需要。
The dynamic equation of the transient response in a cracked rotor system was modelled, the numerical simulation solutions of the uncracked rotor and the cracked rotor were obtained.
摘要基建立的裂纹转子瞬态回应动力学模型,得到了有无裂纹转子的数值仿真解。
The effect of the mesh density, the change of dynamic plasticity property of mild steel with strain rate and the spotweld mechanical property on the simulation results is analyzed.
分析了网格密度、身用低碳钢材料塑性特性随应变率的变化及焊点力学特性因素仿真结果的影响。
声明:以上例句、词性分类均由互联网资源自动生成,部分未经过人工审核,其表达内容亦不代表本软件的观点;若发现问题,欢迎向我们指正。
Using PMK programing controler simulates of the process control system and corrects parameter of controler in extractive tower.
利用PMK可编程调节器现过程控
系
的仿真,并
调节器进行参数整定。
A new clue for architectural CAD and software design is proposed during the developing procedure, which is called three-moduler-in-one method.
在系中,提出并
现了集建筑建模器-结构分析器-仿真演示器于一体的三器一体化的建筑工程辅助设计和软件开发思路。
Finally, the optimization quantity of spare parts following exponential distribution are calculated with both this method and analysable method.The two results fit well.
最后利用一个指数分布例
解析方法和仿真方法计算出的结果进行比较,从而
所提出的仿真方法进行了检验。
As the most important component of automobilism simulator, the newgenerated real-time visual system is a completely new visual simulation and scene management system.
作为汽车驾驶模拟器的重要组成部分,汽车驾驶模拟器新一视景系
是一个全新的视景仿真和场景管理系
。
Computer simulation demonstrate that the proposed algorithm can adapt to the identification of several different kinds of fabric as woven, stockinet, damask and mesh fabric.
通过机织布、针织布、斜纹布和网眼布等不同种类织物的仿真验证了该算法的有效性和适应性。
In order to adapt to real time simulation, the nodes of system and the predigestion was made according to the characteristic of reactor coolant system which will be simulated.
本论文针要仿真的冷却剂系
的特点,
系
进行了节点划分,并做了适当简化,以使其适应
仿真的需要。
The dynamic equation of the transient response in a cracked rotor system was modelled, the numerical simulation solutions of the uncracked rotor and the cracked rotor were obtained.
摘要基于建立的裂纹转子瞬态回应动力学模型,得到了有无裂纹转子的数值仿真解。
The effect of the mesh density, the change of dynamic plasticity property of mild steel with strain rate and the spotweld mechanical property on the simulation results is analyzed.
分析了网格密度、身用低碳钢材料塑性特性随应变率的变化及焊点力学特性因素仿真结果的影响。
声明:以上例句、词性分类均由互联网资源自动生成,部分未经过人工审核,其表达内容亦不表本软件的观点;若发现问题,欢迎向我们指正。
Using PMK programing controler simulates of the process control system and corrects parameter of controler in extractive tower.
利用PMK可编程调节器实现过程控制系统的仿真,并调节器进行参
整定。
A new clue for architectural CAD and software design is proposed during the developing procedure, which is called three-moduler-in-one method.
在系统研制中,提出并实现了集建筑建模器-结构析器-仿真演示器于一体的三器一体化的建筑工程辅助设计
软件开发思路。
Finally, the optimization quantity of spare parts following exponential distribution are calculated with both this method and analysable method.The two results fit well.
最后利用一个指实例
解析
法
仿真
法计算出的结果进行比较,从而
所提出的仿真
法进行了检验。
As the most important component of automobilism simulator, the newgenerated real-time visual system is a completely new visual simulation and scene management system.
作为汽车驾驶模拟器的重要组成部,汽车驾驶模拟器新一代实时视景系统是一个全新的视景仿真
场景管理系统。
Computer simulation demonstrate that the proposed algorithm can adapt to the identification of several different kinds of fabric as woven, stockinet, damask and mesh fabric.
通过机织
、针织
、斜纹
网眼
等不同种类织物的仿真验证了该算法的有效性
适应性。
In order to adapt to real time simulation, the nodes of system and the predigestion was made according to the characteristic of reactor coolant system which will be simulated.
本论文针要仿真的冷却剂系统的特点,
系统进行了节点划
,并做了适当简化,以使其适应实时仿真的需要。
The dynamic equation of the transient response in a cracked rotor system was modelled, the numerical simulation solutions of the uncracked rotor and the cracked rotor were obtained.
摘要基于建立的裂纹转子瞬态回应动力学模型,得到了有无裂纹转子的值仿真解。
The effect of the mesh density, the change of dynamic plasticity property of mild steel with strain rate and the spotweld mechanical property on the simulation results is analyzed.
析了网格密度、身用低碳钢材料塑性特性随应变率的变化及焊点力学特性因素
仿真结果的影响。
声明:以上例句、词性类均由互联网资源自动生成,部
未经过人工审核,其表达内容亦不代表本软件的观点;若发现问题,欢迎向我们指正。
Using PMK programing controler simulates of the process control system and corrects parameter of controler in extractive tower.
利用PMK可编程调节器实现过程控制系统的仿真,并调节器进行参数整定。
A new clue for architectural CAD and software design is proposed during the developing procedure, which is called three-moduler-in-one method.
在系统研制中,提出并实现了集建筑建模器-结构分析器-仿真演示器于一体的三器一体化的建筑工程助
计和软件开发思路。
Finally, the optimization quantity of spare parts following exponential distribution are calculated with both this method and analysable method.The two results fit well.
最后利用一个指数分布实例解析方法和仿真方法计算出的结果进行比较,从
所提出的仿真方法进行了检验。
As the most important component of automobilism simulator, the newgenerated real-time visual system is a completely new visual simulation and scene management system.
作为汽车驾驶模拟器的重要组成部分,汽车驾驶模拟器新一代实时视景系统是一个全新的视景仿真和场景管理系统。
Computer simulation demonstrate that the proposed algorithm can adapt to the identification of several different kinds of fabric as woven, stockinet, damask and mesh fabric.
通过机织布、针织布、斜纹布和网眼布等不同种类织物的仿真验证了该算法的有效性和适应性。
In order to adapt to real time simulation, the nodes of system and the predigestion was made according to the characteristic of reactor coolant system which will be simulated.
本论文针要仿真的冷却剂系统的特点,
系统进行了节点划分,并做了适当简化,以使其适应实时仿真的需要。
The dynamic equation of the transient response in a cracked rotor system was modelled, the numerical simulation solutions of the uncracked rotor and the cracked rotor were obtained.
摘要基于建立的裂纹转子瞬态回应动力学模型,得到了有无裂纹转子的数值仿真解。
The effect of the mesh density, the change of dynamic plasticity property of mild steel with strain rate and the spotweld mechanical property on the simulation results is analyzed.
分析了网格密度、身用低碳钢材料塑性特性随应变率的变化及焊点力学特性因素仿真结果的影响。
声明:以上例句、词性分类均由互联网资源自动生成,部分未经过人工审核,其表达内容亦不代表本软件的观点;若发现问题,欢迎向我们指正。