Main defects and key technology in beamhouse effeeting.quality of pigskin garment leather producing were discussed in this paper.
本文讨论了目前国内猪正服装革存在的主要质量缺陷,以及鞣前准备中严重影响这些质量的关键工艺技术。
Main defects and key technology in beamhouse effeeting.quality of pigskin garment leather producing were discussed in this paper.
本文讨论了目前国内猪正服装革存在的主要质量缺陷,以及鞣前准备中严重影响这些质量的关键工艺技术。
The surface defect appeared mainly as air bubbles and ferroferric oxide drops which centred around the lower outer - field portion of the stoneware cup.
表观缺陷主要表现为釉泡和氧化铁粒,且其集中于杯体下部外侧面。
The pattern of fracture by impact penetration test and tensile fatigue test of thermite welding with stereoscan was observed,and the component of defect with energy spectrum was analyed.
微观缺陷主要包括微孔和夹,其中微孔由微气孔和微缩孔组成,夹
物按形态和尺寸分为团簇状夹
、锥状夹
、粒状夹
、
物夹
、丝状夹
和混合形夹
。
声明:以上例句、词性分类均由互联网资源自动生成,部分未经过人工审核,其表达内容亦不代表本软件的观点;若发现问题,欢迎向我们指正。
Main defects and key technology in beamhouse effeeting.quality of pigskin garment leather producing were discussed in this paper.
本文讨论了目前国内猪正服装革存在的主缺陷,以及鞣前准备中严重影响这些
的关键工艺技术。
The surface defect appeared mainly as air bubbles and ferroferric oxide drops which centred around the lower outer - field portion of the stoneware cup.
表观缺陷主表现为釉泡和氧化铁
粒,且其集中于杯体下部外侧面。
The pattern of fracture by impact penetration test and tensile fatigue test of thermite welding with stereoscan was observed,and the component of defect with energy spectrum was analyed.
微观缺陷主包括微孔和
,其中微孔由微气孔和微缩孔组
,
物按形态和尺寸分为团簇状
、锥状
、粒状
、积聚物
、丝状
和混合形
。
声明:以上例句、词性分类均由互联网资源自动生,部分未经过人工审核,其表达内容亦不代表本软件的观点;若发现问题,欢迎向我们指正。
Main defects and key technology in beamhouse effeeting.quality of pigskin garment leather producing were discussed in this paper.
本文讨论了目前国内猪正服装革存在的主要质量,以及鞣前准备中严重影响这些质量的关键工艺技术。
The surface defect appeared mainly as air bubbles and ferroferric oxide drops which centred around the lower outer - field portion of the stoneware cup.
表主要表现为釉泡和氧化铁
粒,且其集中于杯体下部外
。
The pattern of fracture by impact penetration test and tensile fatigue test of thermite welding with stereoscan was observed,and the component of defect with energy spectrum was analyed.
主要包括
孔和夹杂,其中
孔由
气孔和
缩孔组成,夹杂物按形态和尺寸分为团簇状夹杂、锥状夹杂、粒状夹杂、积聚物夹杂、丝状夹杂和混合形夹杂。
声明:以上例句、词性分类均由互联网资源自动生成,部分未经过人工审核,其表达内容亦不代表本软件的点;若发现问题,欢迎向我们指正。
Main defects and key technology in beamhouse effeeting.quality of pigskin garment leather producing were discussed in this paper.
本文讨论了目前国内猪正服装革存在主要质量缺陷,以及鞣前准备中严重影响这些质量
工艺技术。
The surface defect appeared mainly as air bubbles and ferroferric oxide drops which centred around the lower outer - field portion of the stoneware cup.
表观缺陷主要表现为釉泡和氧化铁粒,且其集中于杯体下部外侧面。
The pattern of fracture by impact penetration test and tensile fatigue test of thermite welding with stereoscan was observed,and the component of defect with energy spectrum was analyed.
观缺陷主要
孔和夹杂,其中
孔由
气孔和
缩孔组成,夹杂物按形态和尺寸分为团簇状夹杂、锥状夹杂、粒状夹杂、积聚物夹杂、丝状夹杂和混合形夹杂。
声明:以上例句、词性分类均由互联网资源自动生成,部分未经过人工审核,其表达内容亦不代表本软件观点;若发现问题,欢迎向我们指正。
Main defects and key technology in beamhouse effeeting.quality of pigskin garment leather producing were discussed in this paper.
本文讨论了目前国内猪正服装革存在的主要质,以及鞣前准备中严重影响这些质
的关键工艺技术。
The surface defect appeared mainly as air bubbles and ferroferric oxide drops which centred around the lower outer - field portion of the stoneware cup.
表观主要表现为釉泡和氧化铁
粒,且其集中于杯体下部外侧面。
The pattern of fracture by impact penetration test and tensile fatigue test of thermite welding with stereoscan was observed,and the component of defect with energy spectrum was analyed.
微观主要包括微
和夹杂,其中微
由微气
和微缩
,夹杂物按形态和尺寸分为团簇状夹杂、锥状夹杂、粒状夹杂、积聚物夹杂、丝状夹杂和混合形夹杂。
声明:以上例句、词性分类均由互联网资源自动生,部分未经过人工审核,其表达内容亦不代表本软件的观点;若发现问题,欢迎向我们指正。
Main defects and key technology in beamhouse effeeting.quality of pigskin garment leather producing were discussed in this paper.
本文讨论了目猪正服装革存在的主要质量缺陷,以及鞣
准备中严重影响这些质量的关键工艺技术。
The surface defect appeared mainly as air bubbles and ferroferric oxide drops which centred around the lower outer - field portion of the stoneware cup.
表观缺陷主要表现为釉泡和氧化铁粒,且其集中于杯体下部外侧面。
The pattern of fracture by impact penetration test and tensile fatigue test of thermite welding with stereoscan was observed,and the component of defect with energy spectrum was analyed.
微观缺陷主要包括微孔和夹杂,其中微孔由微气孔和微缩孔组成,夹杂物按形态和尺寸分为夹杂、锥
夹杂、粒
夹杂、积聚物夹杂、丝
夹杂和混合形夹杂。
声明:以上例句、词性分类均由互联网资源自动生成,部分未经过人工审核,其表达容亦不代表本软件的观点;若发现问题,欢迎向我们指正。
Main defects and key technology in beamhouse effeeting.quality of pigskin garment leather producing were discussed in this paper.
本文讨论了目前国内猪正服装革存在的主要质量缺陷,以及鞣前准备中严重影响这些质量的关键工艺技术。
The surface defect appeared mainly as air bubbles and ferroferric oxide drops which centred around the lower outer - field portion of the stoneware cup.
表观缺陷主要表现为釉泡和氧化铁粒,且其集中于杯体下部外侧面。
The pattern of fracture by impact penetration test and tensile fatigue test of thermite welding with stereoscan was observed,and the component of defect with energy spectrum was analyed.
微观缺陷主要包括微孔和夹,其中微孔由微气孔和微缩孔组成,夹
物按形态和尺寸分为团簇状夹
、锥状夹
、粒状夹
、
物夹
、丝状夹
和混合形夹
。
声明:以上例句、词性分类均由互联网资源自动生成,部分未经过人工审核,其表达内容亦不代表本软件的观点;若发现问题,欢迎向我们指正。
Main defects and key technology in beamhouse effeeting.quality of pigskin garment leather producing were discussed in this paper.
本文讨论了目前国内猪正服装革存在的主要质量陷,以及鞣前准备中严重影响这些质量的关键工艺技
。
The surface defect appeared mainly as air bubbles and ferroferric oxide drops which centred around the lower outer - field portion of the stoneware cup.
陷主要
现为釉泡和氧化铁
粒,且其集中于杯体下部外侧面。
The pattern of fracture by impact penetration test and tensile fatigue test of thermite welding with stereoscan was observed,and the component of defect with energy spectrum was analyed.
陷主要包括
孔和夹杂,其中
孔由
气孔和
缩孔组成,夹杂物按形态和尺寸分为团簇状夹杂、锥状夹杂、粒状夹杂、积聚物夹杂、丝状夹杂和混合形夹杂。
声明:以上例句、词性分类均由互联网资源自动生成,部分未经过人工审核,其达内容亦不代
本软件的
点;若发现问题,欢迎向我们指正。
Main defects and key technology in beamhouse effeeting.quality of pigskin garment leather producing were discussed in this paper.
本文讨论了目前国内猪正服装革存在的主要质量陷,以及鞣前准备中严重影响这些质量的关键工艺技
。
The surface defect appeared mainly as air bubbles and ferroferric oxide drops which centred around the lower outer - field portion of the stoneware cup.
陷主要
现为釉泡和氧化铁
粒,且其集中于杯体下部外侧面。
The pattern of fracture by impact penetration test and tensile fatigue test of thermite welding with stereoscan was observed,and the component of defect with energy spectrum was analyed.
陷主要包括
孔和夹杂,其中
孔由
气孔和
缩孔组成,夹杂物按形态和尺寸分为团簇状夹杂、锥状夹杂、粒状夹杂、积聚物夹杂、丝状夹杂和混合形夹杂。
声明:以上例句、词性分类均由互联网资源自动生成,部分未经过人工审核,其达内容亦不代
本软件的
点;若发现问题,欢迎向我们指正。