Now we need a vertex buffer.

现在我们需要一点缓冲。

The tangent, binormal, and normal attributes represent the coordinate axes of the tangent space surrounding each vertex.

切，副法和法代表了点的切空间的三轴。

An application programmer must supply a tangent, binormal, and normal at each vertex.

程序员必提供点的切、副法和法。

The main causes of dystocia of vertex presentation were occiput malpresentation, macrosomic infant, uterine atony, abnormal pelvic and genital tract.

头位难产的主要因素依次为胎头位置异常、巨大儿、宫缩乏力、软产道及骨产道异常。

Explain the difference between power and vertex power from basic definitions of optics, and analyze the measuring principle and error of focimeter.

从光学的基础定义出发，阐述光焦度和焦度的差别，并对焦度计的测量原理和误差进行正确分析。

In this paper, we study the minimum-weight feedback vertex set problem in outerplanar graphs and present a linear time algorithm to solve it.

本文主要考虑外平面图中的反馈点集并给出了一求外平面图最小点赋权反馈点集的性时间算法。

Objective：To confirm that the lensometer adjusted by the special lenses group for contact lenses cant express the back vertex power of contact lenses.

证实采用接触镜专用标准透镜组标定的焦度计不能准确测定被测角膜接触镜的焦度。

The kings prblems in semicomplete digraphs without vertices whose in-degree are zero and locally semicomplete digraph under some conditions are discussed chiefly in the paper.

其中,主要讨论了不包含内度为零的点的半完全有向图和满足若干条件下的局部半完全有向图中王的问题。

First, the vertexes are sequenced according to their curvature to form a descending order vertex array.The rearer vertex has smaller local curvature.

首先对所有点按照曲率大小进行排序，形成按照降序排列的点集，点越靠后，其周围局部曲率越小。

All graphs are finite simple undirected graph with no isolated vertices in this paper. It is completed the classification of graphs on which a semidihedral group acts edge-transitively.

运用图的自同构理论，获得了关于半二面体群边传递的图Γ的完全分类。

Now we need a vertex buffer.

现在我们需要一个顶点缓冲。

The tangent, binormal, and normal attributes represent the coordinate axes of the tangent space surrounding each vertex.

切线，副法线和法线代表了每个顶点切线空间三个轴。

An application programmer must supply a tangent, binormal, and normal at each vertex.

程序员必提供每个顶点切线、副法线和法线。

The main causes of dystocia of vertex presentation were occiput malpresentation, macrosomic infant, uterine atony, abnormal pelvic and genital tract.

导致头位难产主要因素依次为胎头位置异常、巨大儿、宫缩乏力、软产道及骨产道异常。

Explain the difference between power and vertex power from basic definitions of optics, and analyze the measuring principle and error of focimeter.

从光学定义出发，阐述光焦度和顶焦度差别，并对焦度计测量原理和误差进行正确分析。

In this paper, we study the minimum-weight feedback vertex set problem in outerplanar graphs and present a linear time algorithm to solve it.

本文主要考虑外平面图中反馈点集并给出了一个求外平面图最小顶点赋权反馈点集线性时间算法。

Objective：To confirm that the lensometer adjusted by the special lenses group for contact lenses cant express the back vertex power of contact lenses.

证实采用接触镜专用标准透镜标定焦度计不能准确测定被测角膜接触镜顶焦度。

The kings prblems in semicomplete digraphs without vertices whose in-degree are zero and locally semicomplete digraph under some conditions are discussed chiefly in the paper.

其中,主要讨论了不包含内度为零顶点半完全有向图和满足若干条件下局部半完全有向图中王问题。

First, the vertexes are sequenced according to their curvature to form a descending order vertex array.The rearer vertex has smaller local curvature.

首先对所有顶点按照曲率大小进行排序，形成按照降序排列顶点集，顶点越靠后，其周围局部曲率越小。

All graphs are finite simple undirected graph with no isolated vertices in this paper. It is completed the classification of graphs on which a semidihedral group acts edge-transitively.

运用图自同构理论，获得了关于半二面体群边传递图Γ完全分类。

Now we need a vertex buffer.

现在我们需要一个顶点缓冲。

The tangent, binormal, and normal attributes represent the coordinate axes of the tangent space surrounding each vertex.

切线，副法线和法线代表了每个顶点的切线空间的三个轴。

An application programmer must supply a tangent, binormal, and normal at each vertex.

程序员必提供每个顶点的切线、副法线和法线。

The main causes of dystocia of vertex presentation were occiput malpresentation, macrosomic infant, uterine atony, abnormal pelvic and genital tract.

导致头位难的主要因素依次为胎头位置异常、巨大儿、宫缩乏力、软骨异常。

Explain the difference between power and vertex power from basic definitions of optics, and analyze the measuring principle and error of focimeter.

从光学的基础定义出发，阐述光焦和顶焦的差别，并对焦计的测量原理和误差进行正确分析。

In this paper, we study the minimum-weight feedback vertex set problem in outerplanar graphs and present a linear time algorithm to solve it.

本文主要考虑外平面图中的反馈点集并给出了一个求外平面图最小顶点赋权反馈点集的线性时间算法。

Objective：To confirm that the lensometer adjusted by the special lenses group for contact lenses cant express the back vertex power of contact lenses.

证实采用接触镜专用标准透镜组标定的焦计不能准确测定被测角膜接触镜的顶焦。

The kings prblems in semicomplete digraphs without vertices whose in-degree are zero and locally semicomplete digraph under some conditions are discussed chiefly in the paper.

其中,主要讨论了不包含内为零的顶点的半完全有向图和满足若干条件下的局部半完全有向图中王的问题。

First, the vertexes are sequenced according to their curvature to form a descending order vertex array.The rearer vertex has smaller local curvature.

首先对所有顶点按照曲率大小进行排序，形成按照降序排列的顶点集，顶点越靠后，其周围局部曲率越小。

All graphs are finite simple undirected graph with no isolated vertices in this paper. It is completed the classification of graphs on which a semidihedral group acts edge-transitively.

运用图的自同构理论，获得了关于半二面体群边传递的图Γ的完全分类。

Now we need a vertex buffer.

们需要一个顶点缓冲。

The tangent, binormal, and normal attributes represent the coordinate axes of the tangent space surrounding each vertex.

切线，副法线和法线代表了每个顶点的切线空间的三个轴。

An application programmer must supply a tangent, binormal, and normal at each vertex.

程序员必提供每个顶点的切线、副法线和法线。

The main causes of dystocia of vertex presentation were occiput malpresentation, macrosomic infant, uterine atony, abnormal pelvic and genital tract.

导致头位难产的主要因素依次为胎头位置异常、巨大、乏力、软产道及骨产道异常。

Explain the difference between power and vertex power from basic definitions of optics, and analyze the measuring principle and error of focimeter.

从光学的基础定义出发，阐述光焦度和顶焦度的差别，并对焦度计的测量原理和误差进行正确分析。

In this paper, we study the minimum-weight feedback vertex set problem in outerplanar graphs and present a linear time algorithm to solve it.

本文主要考虑外平面图中的反馈点集并给出了一个求外平面图最小顶点赋权反馈点集的线性时间算法。

Objective：To confirm that the lensometer adjusted by the special lenses group for contact lenses cant express the back vertex power of contact lenses.

证实采用接触镜专用标准透镜组标定的焦度计不能准确测定被测角膜接触镜的顶焦度。

The kings prblems in semicomplete digraphs without vertices whose in-degree are zero and locally semicomplete digraph under some conditions are discussed chiefly in the paper.

其中,主要讨论了不包含内度为零的顶点的半完全有向图和满足若干条件下的局部半完全有向图中王的问题。

First, the vertexes are sequenced according to their curvature to form a descending order vertex array.The rearer vertex has smaller local curvature.

首先对所有顶点按照曲率大小进行排序，形成按照降序排列的顶点集，顶点越靠后，其周围局部曲率越小。

All graphs are finite simple undirected graph with no isolated vertices in this paper. It is completed the classification of graphs on which a semidihedral group acts edge-transitively.

运用图的自同构理论，获得了关于半二面体群边传递的图Γ的完全分类。

Now we need a vertex buffer.

现在我们需要一个顶缓冲。

The tangent, binormal, and normal attributes represent the coordinate axes of the tangent space surrounding each vertex.

切线，副法线和法线代表了每个顶的切线空间的三个轴。

An application programmer must supply a tangent, binormal, and normal at each vertex.

程序员必提供每个顶的切线、副法线和法线。

The main causes of dystocia of vertex presentation were occiput malpresentation, macrosomic infant, uterine atony, abnormal pelvic and genital tract.

导致头位难产的主要因素依次为胎头位置异常、巨大儿、宫缩乏力、软产道及骨产道异常。

Explain the difference between power and vertex power from basic definitions of optics, and analyze the measuring principle and error of focimeter.

从光学的基础定义出发，阐述光焦度和顶焦度的别，并对焦度计的测量原理和行正确分析。

In this paper, we study the minimum-weight feedback vertex set problem in outerplanar graphs and present a linear time algorithm to solve it.

本文主要考虑外平面图中的反馈集并给出了一个求外平面图最小顶赋权反馈集的线性时间算法。

Objective：To confirm that the lensometer adjusted by the special lenses group for contact lenses cant express the back vertex power of contact lenses.

证实采用接触镜专用标准透镜组标定的焦度计不能准确测定被测角膜接触镜的顶焦度。

The kings prblems in semicomplete digraphs without vertices whose in-degree are zero and locally semicomplete digraph under some conditions are discussed chiefly in the paper.

其中,主要讨论了不包含内度为零的顶的半完全有向图和满足若干条件下的局部半完全有向图中王的问题。

First, the vertexes are sequenced according to their curvature to form a descending order vertex array.The rearer vertex has smaller local curvature.

首先对所有顶按照曲率大小行排序，形成按照降序排列的顶集，顶越靠后，其周围局部曲率越小。

All graphs are finite simple undirected graph with no isolated vertices in this paper. It is completed the classification of graphs on which a semidihedral group acts edge-transitively.

运用图的自同构理论，获得了关于半二面体群边传递的图Γ的完全分类。

Now we need a vertex buffer.

现在我们需要一个顶缓冲。

The tangent, binormal, and normal attributes represent the coordinate axes of the tangent space surrounding each vertex.

切线，副法线和法线代表了每个顶的切线空间的三个轴。

An application programmer must supply a tangent, binormal, and normal at each vertex.

程序员必提供每个顶的切线、副法线和法线。

The main causes of dystocia of vertex presentation were occiput malpresentation, macrosomic infant, uterine atony, abnormal pelvic and genital tract.

导致头位难产的主要因素依次为胎头位置异常、巨大儿、宫缩乏力、软产道及骨产道异常。

Explain the difference between power and vertex power from basic definitions of optics, and analyze the measuring principle and error of focimeter.

从光学的基础定义出发，阐述光焦度和顶焦度的差别，并对焦度计的测量原理和误差进行正。

In this paper, we study the minimum-weight feedback vertex set problem in outerplanar graphs and present a linear time algorithm to solve it.

本文主要考虑外平面图中的反馈集并给出了一个求外平面图最小顶赋权反馈集的线性时间算法。

Objective：To confirm that the lensometer adjusted by the special lenses group for contact lenses cant express the back vertex power of contact lenses.

证实采用接触镜专用标准透镜组标定的焦度计不能准测定被测角膜接触镜的顶焦度。

The kings prblems in semicomplete digraphs without vertices whose in-degree are zero and locally semicomplete digraph under some conditions are discussed chiefly in the paper.

其中,主要讨论了不包含内度为零的顶的半完全有向图和满足若干条件下的局部半完全有向图中王的问题。

First, the vertexes are sequenced according to their curvature to form a descending order vertex array.The rearer vertex has smaller local curvature.

首先对所有顶按照曲率大小进行排序，形成按照降序排列的顶集，顶越靠后，其周围局部曲率越小。

All graphs are finite simple undirected graph with no isolated vertices in this paper. It is completed the classification of graphs on which a semidihedral group acts edge-transitively.

运用图的自同构理论，获得了关于半二面体群传递的图Γ的完全类。

Now we need a vertex buffer.

现在我们需要一个点缓冲。

The tangent, binormal, and normal attributes represent the coordinate axes of the tangent space surrounding each vertex.

切线，副法线和法线代表了每个点的切线空间的三个轴。

An application programmer must supply a tangent, binormal, and normal at each vertex.

程序员必提供每个点的切线、副法线和法线。

The main causes of dystocia of vertex presentation were occiput malpresentation, macrosomic infant, uterine atony, abnormal pelvic and genital tract.

导致头位难产的主要因素依次为胎头位置异常、巨大儿、宫缩乏力、软产道及骨产道异常。

Explain the difference between power and vertex power from basic definitions of optics, and analyze the measuring principle and error of focimeter.

从光学的基础定义发，阐述光焦度和焦度的差别，对焦度计的测量原理和误差进行正确分析。

In this paper, we study the minimum-weight feedback vertex set problem in outerplanar graphs and present a linear time algorithm to solve it.

本文主要考虑外平面图中的反馈点集了一个求外平面图最小点赋权反馈点集的线性时间算法。

Objective：To confirm that the lensometer adjusted by the special lenses group for contact lenses cant express the back vertex power of contact lenses.

证实采用接触镜专用标准透镜组标定的焦度计不能准确测定被测角膜接触镜的焦度。

The kings prblems in semicomplete digraphs without vertices whose in-degree are zero and locally semicomplete digraph under some conditions are discussed chiefly in the paper.

其中,主要讨论了不包含内度为零的点的半完全有向图和满足若干条件下的局部半完全有向图中王的问题。

First, the vertexes are sequenced according to their curvature to form a descending order vertex array.The rearer vertex has smaller local curvature.

首先对所有点按照曲率大小进行排序，形成按照降序排列的点集，点越靠后，其周围局部曲率越小。

All graphs are finite simple undirected graph with no isolated vertices in this paper. It is completed the classification of graphs on which a semidihedral group acts edge-transitively.

运用图的自同构理论，获得了关于半二面体群边传递的图Γ的完全分类。

Now we need a vertex buffer.

现在我们需要一个顶点缓冲。

The tangent, binormal, and normal attributes represent the coordinate axes of the tangent space surrounding each vertex.

切线，副法线和法线代表了每个顶点切线空间三个轴。

An application programmer must supply a tangent, binormal, and normal at each vertex.

程序员必提供每个顶点切线、副法线和法线。

The main causes of dystocia of vertex presentation were occiput malpresentation, macrosomic infant, uterine atony, abnormal pelvic and genital tract.

导致头位难产主要因素依次为胎头位置异常、巨大儿、宫缩乏力、软产道及骨产道异常。

Explain the difference between power and vertex power from basic definitions of optics, and analyze the measuring principle and error of focimeter.

从光学基础定义出发，阐述光焦度和顶焦度差别，并对焦度计理和误差进行正确分析。

In this paper, we study the minimum-weight feedback vertex set problem in outerplanar graphs and present a linear time algorithm to solve it.

本文主要考虑外平面图中反馈点集并给出了一个求外平面图最小顶点赋权反馈点集线性时间算法。

Objective：To confirm that the lensometer adjusted by the special lenses group for contact lenses cant express the back vertex power of contact lenses.

证实采用接触镜专用标准透镜组标定焦度计不能准确定被角膜接触镜顶焦度。

The kings prblems in semicomplete digraphs without vertices whose in-degree are zero and locally semicomplete digraph under some conditions are discussed chiefly in the paper.

其中,主要讨论了不包含内度为零顶点半完全有向图和满足若干条件下局部半完全有向图中王问题。

First, the vertexes are sequenced according to their curvature to form a descending order vertex array.The rearer vertex has smaller local curvature.

首先对所有顶点按照曲率大小进行排序，形成按照降序排列顶点集，顶点越靠后，其周围局部曲率越小。

All graphs are finite simple undirected graph with no isolated vertices in this paper. It is completed the classification of graphs on which a semidihedral group acts edge-transitively.

运用图自同构理论，获得了关于半二面体群边传递图Γ完全分类。

Now we need a vertex buffer.

现在我们需要一个顶点缓冲。

The tangent, binormal, and normal attributes represent the coordinate axes of the tangent space surrounding each vertex.

切线，副法线和法线代表了每个顶点的切线空间的三个轴。

An application programmer must supply a tangent, binormal, and normal at each vertex.

程序员必提供每个顶点的切线、副法线和法线。

The main causes of dystocia of vertex presentation were occiput malpresentation, macrosomic infant, uterine atony, abnormal pelvic and genital tract.

导致头位难产的主要因素依次为胎头位置异常、巨大儿、宫缩乏力、软产道及骨产道异常。

Explain the difference between power and vertex power from basic definitions of optics, and analyze the measuring principle and error of focimeter.

从光学的基础定义出发，阐述光焦度和顶焦度的差别，并对焦度计的测量原理和误差进行正确分析。

In this paper, we study the minimum-weight feedback vertex set problem in outerplanar graphs and present a linear time algorithm to solve it.

本文主要考虑外平的反馈点集并给出了一个求外平最小顶点赋权反馈点集的线性时间算法。

Objective：To confirm that the lensometer adjusted by the special lenses group for contact lenses cant express the back vertex power of contact lenses.

证实采用接触镜专用标准透镜组标定的焦度计不能准确测定被测角膜接触镜的顶焦度。

The kings prblems in semicomplete digraphs without vertices whose in-degree are zero and locally semicomplete digraph under some conditions are discussed chiefly in the paper.

其,主要讨论了不包含内度为零的顶点的半完全有向和满足若干条件下的局部半完全有向王的问题。

First, the vertexes are sequenced according to their curvature to form a descending order vertex array.The rearer vertex has smaller local curvature.

首先对所有顶点按照曲率大小进行排序，形成按照降序排列的顶点集，顶点越靠后，其周围局部曲率越小。

All graphs are finite simple undirected graph with no isolated vertices in this paper. It is completed the classification of graphs on which a semidihedral group acts edge-transitively.

运用的自同构理论，获得了关于半二体群边传递的Γ的完全分类。