The gross rubber has a high plasticity and fluidity and gumminess of composition is increased.
其具有较高的塑
及流动
并使胶料粘
增加。
;成形
,柔软
塑
(指生物体对环境的适
)生>
义词
;
塑
理论
指数;增塑指数;塑
值The gross rubber has a high plasticity and fluidity and gumminess of composition is increased.
其具有较高的塑
及流动
并使胶料粘
增加。
It is related to metallurgy,thermology,and the theory of plasticity and developed on the basis of them.
它涉及金属学、传热学和塑
力学理论,并以此为基础,交

而成。
The influence of peptizer B on Mooney viscosity,plasticity and heat aging property of NR was investigated.
研究塑解剂B对NR门尼粘度、塑
和热老化
能的影响。
After experimental data processing, material's viscousness coefficient was acquired and a new method to determine fatigue limit by the threshold of plasticity energy dissipation was given.
通过对试验数据的分析,求出了材料的黏
系数,给出了利用塑
能耗的起点确定材料疲劳极限的方法。
The effect of the mesh density, the change of dynamic plasticity property of mild steel with strain rate and the spotweld mechanical property on the simulation results is analyzed.
分析了网格密度、身用低碳钢材料塑
特
随
变率的变化及焊点力学特
因素对仿真结果的影响。
声明:以上例句、词
分类均由互联网资源自动生成,部分未经过人工审核,其表达内容亦不代表本软件的观点;若
现问题,欢迎向我们指正。

性(指生物体对环境的适应性)生>

定;
性
性理论
性指
;
指
;
性值The gross rubber has a high plasticity and fluidity and gumminess of composition is increased.
其具有较高的
性及流动性并使胶料粘性
加。
It is related to metallurgy,thermology,and the theory of plasticity and developed on the basis of them.
它涉及金属学、传热学和
性力学理论,并以此为基础,交叉发展而成。
The influence of peptizer B on Mooney viscosity,plasticity and heat aging property of NR was investigated.
研究
解剂B对NR门尼粘度、
性和热老化性能的影响。
After experimental data processing, material's viscousness coefficient was acquired and a new method to determine fatigue limit by the threshold of plasticity energy dissipation was given.
通过对试验
据的分析,求出了材料的黏性系
,给出了利用
性能耗的起点确定材料疲劳极限的方法。
The effect of the mesh density, the change of dynamic plasticity property of mild steel with strain rate and the spotweld mechanical property on the simulation results is analyzed.
分析了网格密度、身用低碳钢材料
性特性随应变率的变化及焊点力学特性因素对仿真结果的影响。
声明:以上例句、词性分类均由互联网资源自动生成,部分未经过人工审核,其表达内容亦不代表本软件的观点;若发现问题,欢迎向我们指正。
;成形
,柔软


(指生物体对环境的适应
)生>
词
经元的;
;
经的;



理论
指数;增
指数;
值The gross rubber has a high plasticity and fluidity and gumminess of composition is increased.
其具有较高的
及流动
并使胶料粘
增加。
It is related to metallurgy,thermology,and the theory of plasticity and developed on the basis of them.
它涉及金属学、传热学和

学理论,并以此为基础,交叉发展而成。
The influence of peptizer B on Mooney viscosity,plasticity and heat aging property of NR was investigated.
研究
解剂B对NR门尼粘度、
和热老化
能的影响。
After experimental data processing, material's viscousness coefficient was acquired and a new method to determine fatigue limit by the threshold of plasticity energy dissipation was given.
通过对试验数据的分析,求出了材料的黏
系数,给出了利用
能耗的起点确定材料疲劳极限的方法。
The effect of the mesh density, the change of dynamic plasticity property of mild steel with strain rate and the spotweld mechanical property on the simulation results is analyzed.
分析了网格密度、身用低碳钢材料
特
随应变率的变化及焊点
学特
因素对仿真结果的影响。
声明:以上例句、词
分类均由互联网资源自动生成,部分未经过人工审核,其表达内容亦不代表本软件的观点;若发现问题,欢迎向我们指正。
形性,柔软性
塑性(指生物体对环境

性)生>
;
性;
;
;
;
;
;
塑性The gross rubber has a high plasticity and fluidity and gumminess of composition is increased.
其具有较高
塑性及流动性并使胶料粘性增加。
It is related to metallurgy,thermology,and the theory of plasticity and developed on the basis of them.
它涉及金属学、传热学和塑性力学理论,并以此为基础,交叉发

。
The influence of peptizer B on Mooney viscosity,plasticity and heat aging property of NR was investigated.
研究塑解剂B对NR门尼粘度、塑性和热老化性能
影响。
After experimental data processing, material's viscousness coefficient was acquired and a new method to determine fatigue limit by the threshold of plasticity energy dissipation was given.
通过对试验数据
分析,求出了材料
黏性系数,给出了利用塑性能耗
起点确定材料疲劳极限
方法。
The effect of the mesh density, the change of dynamic plasticity property of mild steel with strain rate and the spotweld mechanical property on the simulation results is analyzed.
分析了网格密度、身用低碳钢材料塑性特性随
变率
变化及焊点力学特性因素对仿真结果
影响。
声明:以上例句、词性分类均由互联网资源自动生
,部分未经过人工审核,其表达内容亦不代表本软件
观点;若发现问题,欢迎向我们指正。
塑性(指生物体对环境
适应性)生>
;
;
;
;
;
;
态静止,
态平衡,自我平衡,原状稳定;
塑性The gross rubber has a high plasticity and fluidity and gumminess of composition is increased.
其
有
高
塑性及流
性并使胶料粘性增加。
It is related to metallurgy,thermology,and the theory of plasticity and developed on the basis of them.
它涉及金属学、传热学和塑性力学理论,并以此为基础,交叉发展而成。
The influence of peptizer B on Mooney viscosity,plasticity and heat aging property of NR was investigated.
研究塑解剂B对NR门尼粘度、塑性和热老化性能
影响。
After experimental data processing, material's viscousness coefficient was acquired and a new method to determine fatigue limit by the threshold of plasticity energy dissipation was given.
通过对试验数据
分析,求出了材料
黏性系数,给出了利用塑性能耗
起点确定材料疲劳极限
方法。
The effect of the mesh density, the change of dynamic plasticity property of mild steel with strain rate and the spotweld mechanical property on the simulation results is analyzed.
分析了网格密度、身用低碳钢材料塑性特性随应变率
变化及焊点力学特性因素对仿真结果
影响。
声明:以上例句、词性分类均由互联网资源自
生成,部分未经过人工审核,其表达内容亦不代表本软件
观点;若发现问题,欢迎向我们指正。
塑性(指生物体对环境
适应性)生>
经元
;
;
;
经
;
;
;
塑性The gross rubber has a high plasticity and fluidity and gumminess of composition is increased.
其具有较高
塑性及流动性并

粘性增加。
It is related to metallurgy,thermology,and the theory of plasticity and developed on the basis of them.
它涉及金属学、传热学和塑性力学理论,并以此为基础,交叉发展而成。
The influence of peptizer B on Mooney viscosity,plasticity and heat aging property of NR was investigated.
研究塑解剂B对NR门尼粘度、塑性和热老化性能
影响。
After experimental data processing, material's viscousness coefficient was acquired and a new method to determine fatigue limit by the threshold of plasticity energy dissipation was given.
通过对试验数据
分析,求出了材
黏性系数,给出了利用塑性能耗
起点确定材
疲劳极限
方法。
The effect of the mesh density, the change of dynamic plasticity property of mild steel with strain rate and the spotweld mechanical property on the simulation results is analyzed.
分析了网格密度、身用低碳钢材
塑性特性随应变率
变化及焊点力学特性因素对仿真结果
影响。
声明:以上例句、词性分类均由互联网资源自动生成,部分未经过人工审核,其表达内容亦不代表本软件
观点;若发现问题,欢迎向我们指正。
塑性(指生物体对环境的适应性)生>
词
塑性The gross rubber has a high plasticity and fluidity and gumminess of composition is increased.
其具有较高的塑性及流动性并使胶料粘性增加。
It is related to metallurgy,thermology,and the theory of plasticity and developed on the basis of them.
它涉及金属学、传热学和塑性力学理论,并

基础,交叉发展而成。
The influence of peptizer B on Mooney viscosity,plasticity and heat aging property of NR was investigated.
研究塑解剂B对NR门尼粘度、塑性和热老化性能的影响。
After experimental data processing, material's viscousness coefficient was acquired and a new method to determine fatigue limit by the threshold of plasticity energy dissipation was given.
通过对试验数据的分析,求出了材料的黏性系数,给出了利用塑性能耗的起点确定材料疲劳极限的方法。
The effect of the mesh density, the change of dynamic plasticity property of mild steel with strain rate and the spotweld mechanical property on the simulation results is analyzed.
分析了网格密度、身用低碳钢材料塑性特性随应变率的变化及焊点力学特性因素对仿真结果的影响。
声明:
上例句、词性分类均由互
网资源自动生成,部分未经过人工审核,其表达内容亦不代表本软件的观点;若发现问题,欢迎向我们指正。
;成形
,柔软
塑
(指生物体对环境的适应
)生>
词
;
塑
理论
指数;增塑指数;塑
值The gross rubber has a high plasticity and fluidity and gumminess of composition is increased.
其具有较高的塑
及流动
并使胶料粘
增加。
It is related to metallurgy,thermology,and the theory of plasticity and developed on the basis of them.
它涉及金属学、传热学和塑
力学理论,并以此为基础,

展而成。
The influence of peptizer B on Mooney viscosity,plasticity and heat aging property of NR was investigated.
研究塑解剂B对NR门尼粘度、塑
和热老化
能的影响。
After experimental data processing, material's viscousness coefficient was acquired and a new method to determine fatigue limit by the threshold of plasticity energy dissipation was given.
通过对试验数据的分析,求出了材料的黏
系数,给出了利用塑
能耗的起点确定材料疲劳极限的方法。
The effect of the mesh density, the change of dynamic plasticity property of mild steel with strain rate and the spotweld mechanical property on the simulation results is analyzed.
分析了网格密度、身用低碳钢材料塑
特
随应变率的变化及焊点力学特
因素对仿真结果的影响。
声明:以上例句、词
分类均由互联网资源自动生成,部分未经过人工审核,其表达内容亦不代表本软件的观点;若
现问题,欢迎向我们指正。
塑性(指生物体对环境
适应性)生>
;
;
;
;
;

;
塑性The gross rubber has a high plasticity and fluidity and gumminess of composition is increased.
其具有

塑性及流动性并使胶料粘性增加。
It is related to metallurgy,thermology,and the theory of plasticity and developed on the basis of them.
它涉及金属学、传热学和塑性力学理论,并以此为基础,交叉发展而成。
The influence of peptizer B on Mooney viscosity,plasticity and heat aging property of NR was investigated.
研究塑解剂B对NR门尼粘度、塑性和热老化性能
影响。
After experimental data processing, material's viscousness coefficient was acquired and a new method to determine fatigue limit by the threshold of plasticity energy dissipation was given.
通过对试验数据
分析,求出了材料
黏性系数,给出了利用塑性能耗
起点确定材料疲劳极限
方法。
The effect of the mesh density, the change of dynamic plasticity property of mild steel with strain rate and the spotweld mechanical property on the simulation results is analyzed.
分析了网格密度、身用低碳钢材料塑性特性随应变率
变化及焊点力学特性因素对仿真结果
影响。
声明:以上例句、词性分类均由互联网资源自动生成,部分未经过人工审核,其
达内容亦不代
本软件
观点;若发现问题,欢迎向我们指正。