Made of shaping Polytetrafluorethylene Resin by moulding in ordinary temperature then through high heat sintering.

将聚四氟乙烯树脂在常温压法型后再经高温烧结制。

Smokey-grey painted walls and contrasting crisp white wainscoting and window moulding give modern edge to this traditional foyer space.

烟灰色的墙壁，雪白的护墙板和窗框，强烈的对比让这个门厅看上去很是时尚。

The machine can finish the moulding and processing of heteromorphosis iron craftwork with good consistency, and can process parts in batches and high efficiency.

本机可以完异铁艺工件的一次加工，铁艺工件一致性好，可实现批量生产，工作效率高。

In the compression moulding technology, preheat and prepressing procedures are added to improve the flowability of the bond and physical and mechanical properties of the product.

在压缩塑工艺中，增加预热、预压工序，提高粘合剂的流动性和产品的物理机械性能。

This paper compares the performance levels of selected GMS materials as antistat and mould release agents in homopolymer and random and impact copolymer PP injection moulding applications.

本文比较了几种甘油单硬脂酸(GMS)产品在均聚无规与耐冲击共聚PP的注塑应中作为抗静电剂和脱剂的效果。

The result shows that as long as the easing is determined, the armhole hypothenuse increment may be obtained and the twopiece sleeve drafting completed compatibly with the fabric and moulding.

研究结果表明，根据面料及造型的要求，先定吃势，求出袖笼直度增量，即可方便灵活、准确地制作西装袖图。

Made of shaping Polytetrafluorethylene Resin by moulding in ordinary temperature then through high heat sintering.

将聚烯树脂在常温下用压法成型后再经高温烧结制成。

Smokey-grey painted walls and contrasting crisp white wainscoting and window moulding give modern edge to this traditional foyer space.

烟灰色的墙壁，雪白的护墙和窗框，强烈的对比让这个门厅看上去很是时尚。

The machine can finish the moulding and processing of heteromorphosis iron craftwork with good consistency, and can process parts in batches and high efficiency.

本机可以完成异形铁艺工件的一次加工成形，铁艺工件一致性好，可实现批量生产，工作效率高。

In the compression moulding technology, preheat and prepressing procedures are added to improve the flowability of the bond and physical and mechanical properties of the product.

在压缩塑工艺中，增加预热、预压工序，提高粘合剂的流动性和产品的物理机械性能。

This paper compares the performance levels of selected GMS materials as antistat and mould release agents in homopolymer and random and impact copolymer PP injection moulding applications.

本文比较了几种甘油单硬脂酸(GMS)产品在均聚无规与耐冲击共聚PP的注塑应用中作为抗静电剂和脱剂的效果。

The result shows that as long as the easing is determined, the armhole hypothenuse increment may be obtained and the twopiece sleeve drafting completed compatibly with the fabric and moulding.

研究结果表明，根据面料及造型的要求，先定吃势，求出袖笼直度增量，即可方便灵活、准确地制作西装袖图。

Made of shaping Polytetrafluorethylene Resin by moulding in ordinary temperature then through high heat sintering.

将聚四氟乙烯树脂在常温下用压法成型后再经高温烧结制成。

Smokey-grey painted walls and contrasting crisp white wainscoting and window moulding give modern edge to this traditional foyer space.

烟灰色的墙壁，雪白的护墙板和窗框，强烈的对比让这个门厅看上去很是时尚。

The machine can finish the moulding and processing of heteromorphosis iron craftwork with good consistency, and can process parts in batches and high efficiency.

本机成异形铁艺工件的一次加工成形，铁艺工件一致性好，实现批量生产，工作效率高。

In the compression moulding technology, preheat and prepressing procedures are added to improve the flowability of the bond and physical and mechanical properties of the product.

在压缩塑工艺中，增加预热、预压工序，提高粘合剂的流动性和产品的物理机械性能。

This paper compares the performance levels of selected GMS materials as antistat and mould release agents in homopolymer and random and impact copolymer PP injection moulding applications.

本文比较了几种甘油单硬脂酸(GMS)产品在均聚无规与耐冲击共聚PP的注塑应用中作为抗静电剂和脱剂的效果。

The result shows that as long as the easing is determined, the armhole hypothenuse increment may be obtained and the twopiece sleeve drafting completed compatibly with the fabric and moulding.

研究结果表明，根据面料及造型的要求，先定吃势，求袖笼直度增量，即方便灵活、准确地制作西装袖图。

Made of shaping Polytetrafluorethylene Resin by moulding in ordinary temperature then through high heat sintering.

将聚四氟乙烯树脂在常温下用模法成型后再经高温烧结制成。

Smokey-grey painted walls and contrasting crisp white wainscoting and window moulding give modern edge to this traditional foyer space.

烟灰色的墙壁，雪白的护墙板和窗框，强烈的对比让这个门厅看是时尚。

The machine can finish the moulding and processing of heteromorphosis iron craftwork with good consistency, and can process parts in batches and high efficiency.

本机可以完成异形铁艺工件的一次加工成形，铁艺工件一致性好，可实现批量生产，工作效率高。

In the compression moulding technology, preheat and prepressing procedures are added to improve the flowability of the bond and physical and mechanical properties of the product.

在缩模塑工艺中，增加预热、预工序，提高粘合剂的流动性和产品的物理机械性能。

This paper compares the performance levels of selected GMS materials as antistat and mould release agents in homopolymer and random and impact copolymer PP injection moulding applications.

本文比较了几种甘油单硬脂酸(GMS)产品在均聚无规与耐冲击共聚PP的注塑应用中作为抗静电剂和脱模剂的效果。

The result shows that as long as the easing is determined, the armhole hypothenuse increment may be obtained and the twopiece sleeve drafting completed compatibly with the fabric and moulding.

研究结果表明，根据面料及造型的要求，先定吃势，求袖笼直度增量，即可方便灵活、准确地制作西装袖图。

Made of shaping Polytetrafluorethylene Resin by moulding in ordinary temperature then through high heat sintering.

将聚四氟乙烯树脂在常温下用法成型后再经高温烧结成。

Smokey-grey painted walls and contrasting crisp white wainscoting and window moulding give modern edge to this traditional foyer space.

烟灰色的墙壁，雪白的护墙板和窗框，强烈的对比让这个门厅看上去很是时尚。

The machine can finish the moulding and processing of heteromorphosis iron craftwork with good consistency, and can process parts in batches and high efficiency.

本机可以完成异形铁艺工件的一次加工成形，铁艺工件一致性好，可实现批量生产，工作效率高。

In the compression moulding technology, preheat and prepressing procedures are added to improve the flowability of the bond and physical and mechanical properties of the product.

在塑工艺中，增加预热、预工序，提高粘合剂的流动性和产品的物理机械性能。

This paper compares the performance levels of selected GMS materials as antistat and mould release agents in homopolymer and random and impact copolymer PP injection moulding applications.

本文比较了几种甘油单硬脂酸(GMS)产品在均聚无规与耐冲击共聚PP的注塑应用中作为抗静电剂和脱剂的效果。

The result shows that as long as the easing is determined, the armhole hypothenuse increment may be obtained and the twopiece sleeve drafting completed compatibly with the fabric and moulding.

研究结果表明，根据面料及造型的要求，先定吃势，求出袖笼直度增量，即可方便灵活、准确地作西装袖图。

Made of shaping Polytetrafluorethylene Resin by moulding in ordinary temperature then through high heat sintering.

将聚四氟乙烯树脂在常温下用法型后再经高温烧结制。

Smokey-grey painted walls and contrasting crisp white wainscoting and window moulding give modern edge to this traditional foyer space.

烟灰色的墙壁，雪白的护墙板和窗框，强烈的对比让这个门厅看上去很是时尚。

The machine can finish the moulding and processing of heteromorphosis iron craftwork with good consistency, and can process parts in batches and high efficiency.

本机可以完异形铁艺工件的一次加工形，铁艺工件一致性好，可实现批量生产，工作效率高。

In the compression moulding technology, preheat and prepressing procedures are added to improve the flowability of the bond and physical and mechanical properties of the product.

在缩塑工艺中，增加预热、预工序，提高粘合剂的流动性和产品的物理机械性能。

This paper compares the performance levels of selected GMS materials as antistat and mould release agents in homopolymer and random and impact copolymer PP injection moulding applications.

本文比较了几种甘油单硬脂酸(GMS)产品在均聚无规与耐冲击共聚PP的注塑应用中作为抗静电剂和脱剂的效果。

The result shows that as long as the easing is determined, the armhole hypothenuse increment may be obtained and the twopiece sleeve drafting completed compatibly with the fabric and moulding.

研究结果表明，根据面料及造型的要求，先定吃势，求出袖笼直度增量，即可方便灵活、准确地制作西装袖图。

Made of shaping Polytetrafluorethylene Resin by moulding in ordinary temperature then through high heat sintering.

将聚四氟乙烯树脂在常温下用法成型后再经高温烧结成。

Smokey-grey painted walls and contrasting crisp white wainscoting and window moulding give modern edge to this traditional foyer space.

烟灰色的墙壁，雪白的护墙板和窗框，强烈的对比让这个门厅看上去很是时尚。

The machine can finish the moulding and processing of heteromorphosis iron craftwork with good consistency, and can process parts in batches and high efficiency.

本机可以完成异形铁艺工件的一次加工成形，铁艺工件一致性好，可实现批量生产，工作效率高。

In the compression moulding technology, preheat and prepressing procedures are added to improve the flowability of the bond and physical and mechanical properties of the product.

在塑工艺中，增加预热、预工序，提高粘合剂的流动性和产品的物理机械性能。

This paper compares the performance levels of selected GMS materials as antistat and mould release agents in homopolymer and random and impact copolymer PP injection moulding applications.

本文比较了几种甘油单硬脂酸(GMS)产品在均聚无规与耐冲击共聚PP的注塑应用中作为抗静电剂和脱剂的效果。

The result shows that as long as the easing is determined, the armhole hypothenuse increment may be obtained and the twopiece sleeve drafting completed compatibly with the fabric and moulding.

研究结果表明，根据面料及造型的要求，先定吃势，求出袖笼直度增量，即可方便灵活、准确地作西装袖图。

Made of shaping Polytetrafluorethylene Resin by moulding in ordinary temperature then through high heat sintering.

将聚四氟乙烯常温下用模压法成后再经高温烧结制成。

Smokey-grey painted walls and contrasting crisp white wainscoting and window moulding give modern edge to this traditional foyer space.

烟灰色的墙壁，雪白的护墙板和窗框，强烈的对比让这个门厅看上去很是时尚。

The machine can finish the moulding and processing of heteromorphosis iron craftwork with good consistency, and can process parts in batches and high efficiency.

本机可以完成异形铁艺工件的一次加工成形，铁艺工件一致性好，可实现批量生产，工作效率高。

In the compression moulding technology, preheat and prepressing procedures are added to improve the flowability of the bond and physical and mechanical properties of the product.

压缩模塑工艺中，增加预热、预压工序，提高粘合剂的流动性和产品的物理机械性能。

This paper compares the performance levels of selected GMS materials as antistat and mould release agents in homopolymer and random and impact copolymer PP injection moulding applications.

本文比较了几种甘油单硬酸(GMS)产品均聚无规与耐冲击共聚PP的注塑应用中作为抗静电剂和脱模剂的效果。

The result shows that as long as the easing is determined, the armhole hypothenuse increment may be obtained and the twopiece sleeve drafting completed compatibly with the fabric and moulding.

研究结果表明，根据面料及的要求，先定吃势，求出袖笼直度增量，即可方便灵活、准确地制作西装袖图。

Made of shaping Polytetrafluorethylene Resin by moulding in ordinary temperature then through high heat sintering.

将聚四氟乙烯树脂在常温下用法型后再经高温烧结制。

Smokey-grey painted walls and contrasting crisp white wainscoting and window moulding give modern edge to this traditional foyer space.

烟灰色的墙壁，雪白的护墙板和窗框，强烈的对比让这个门厅看上去很是时尚。

The machine can finish the moulding and processing of heteromorphosis iron craftwork with good consistency, and can process parts in batches and high efficiency.

本机可以完异形铁艺工件的一次加工形，铁艺工件一致性好，可实现批量生产，工作效率高。

In the compression moulding technology, preheat and prepressing procedures are added to improve the flowability of the bond and physical and mechanical properties of the product.

在缩塑工艺中，增加预热、预工序，提高粘合剂的流动性和产品的物理机械性能。

This paper compares the performance levels of selected GMS materials as antistat and mould release agents in homopolymer and random and impact copolymer PP injection moulding applications.

本文比较了几种甘油单硬脂酸(GMS)产品在均聚无规与耐冲击共聚PP的注塑应用中作为抗静电剂和脱剂的效果。

The result shows that as long as the easing is determined, the armhole hypothenuse increment may be obtained and the twopiece sleeve drafting completed compatibly with the fabric and moulding.

研究结果表明，根据面料及造型的要求，先定吃势，求出袖笼直度增量，即可方便灵活、准确地制作西装袖图。

Made of shaping Polytetrafluorethylene Resin by moulding in ordinary temperature then through high heat sintering.

将聚四氟乙烯树脂在常温下压法成型后再经高温烧结制成。

Smokey-grey painted walls and contrasting crisp white wainscoting and window moulding give modern edge to this traditional foyer space.

烟灰色的墙壁，雪白的护墙板和窗框，强烈的对比让这个门厅看上去很是时尚。

The machine can finish the moulding and processing of heteromorphosis iron craftwork with good consistency, and can process parts in batches and high efficiency.

本机可以完成异形铁艺工件的一次加工成形，铁艺工件一致性好，可实现批量生产，工作效率高。

In the compression moulding technology, preheat and prepressing procedures are added to improve the flowability of the bond and physical and mechanical properties of the product.

在压工艺中，增加预热、预压工序，提高粘合剂的流动性和产品的物理机械性能。

This paper compares the performance levels of selected GMS materials as antistat and mould release agents in homopolymer and random and impact copolymer PP injection moulding applications.

本文比较了几种甘油单硬脂酸(GMS)产品在均聚无规与耐冲击共聚PP的注应中作为抗静电剂和脱剂的效果。

The result shows that as long as the easing is determined, the armhole hypothenuse increment may be obtained and the twopiece sleeve drafting completed compatibly with the fabric and moulding.

研究结果表明，根据面料及造型的要求，先定吃势，求出袖笼直度增量，即可方便灵活、准确地制作西装袖图。