The wax molds are dipped into waterglass solution, with surface coated by the solution.

将蜡件组浸入含有水玻璃等涂料缸中，涂上涂料。

He is a man of gentle mold.

他是个性格温和人。

Try to compact the sand into the mold.

设法把这沙土堆积到子里。

The sweatful practice sessions mold mighty football teams.

一串汗流浃背训练磨练出实力强大足球队。

One method to make casting sand mold directly from the bozzetto(mud-draft) of the sculpture is introduced.

介绍一种在雕塑泥稿外直接制作铸造砂方法。

Or deny it entry into your heart with excuss molded from doubt or insecurity.

或者际遇疑虑或不安全感借口来拒绝它进入你内心。

The reason of gas-hole defects occured in steel casting for molding eroduction line was analyzed.

结合多年生产实践,分析了湿砂水平造生产线上铸钢件产生原因,介绍了预防铸钢件措施。

But in fact, T. rex broke the tyrannosaur mold, nearly tripling in body mass over its predecessors.

不过，霸王龙确突破了暴龙类形象，体重也几乎是先前三倍。

Cold upset female die of fillister head is the key mold in the manufacturing process of heading bolt.

冷镦圆头凹是冷镦螺栓生产过程中关键具。

The molds having saccharifying enzyme capable of dehydrolyzing uncooked starch are Aspergillus niger, Aspergillus awamori,Rhizopus and endomycopsis fibuligera etc.

具有水解生淀粉能力糖化酶霉菌包括黑曲霉、泡盛曲霉、根霉、罗尔伏格菌和扣囊拟内孢霉等。

Design and manufacture methods of injection mold for the defecator body were introduced,and working process of mold was stated.

介绍了清净管体注射设计与制造方法,并阐述了具工作过程。

Its main parts was the half-calotte Metal-Rubber manufactured by the new technics of facture and advanced mold.

限位器主要构件为带边沿帽半球壳状金属橡胶件。

Bactria food poisoning:The mold, halococci and deformities rod, and staphylococcus aureus...etc. in sand hilus cause.

由沙门菌、嗜盐菌、变形杆菌、金黄色葡萄球菌等引起。

Abstract: Cold upset female die of fillister head is the key mold in the manufacturing process of heading bolt.

摘 要: 冷镦圆头凹是冷镦螺栓生产过程中关键具。

Aplanospore A nonmotile spore , characteristic of the pin molds and certain green algae of the phyla Clorophyta and Chrysomonada.

不能游动孢子，是绿藻门中某些绿藻特征。

Good experiences of plastic, sheet metal and magnalium alloy parts design - Good knowledge of injection mold, stamping die and die-casting mold.

★ 熟悉塑胶材料及其具，熟悉钣金冲压及其具，熟悉镁铝合金压铸工艺和结构设计。

The manual stamping or casting is used to mold eave tile, drip tile, tile with animals, nail head and glassless window.

琉璃瓦中勾头，滴水瓦件以及走兽、钉帽、花窗和正吻、垂兽等构件采用手工成或注浆成。

We have ensured our products’ trimness in appearance and excellence in quality through a centralized management system of storing finished mold products.

统一具存放管理措施，保证具外观上整洁及品质上精准。

SEM was used to observe nucleation site of Co particles, and energy spectrum analysed phase composition of white matter in endosexine of mold.

借助扫描电镜观察到细化叶片表面钴微粒形核核心,通过能谱分析手段,研究壳内表层白色物质相组成。

Early electrical workers used it as a coating to insulate coils, and molded it into stand-alone insulators by pressing together layers of shellac-impreg-nated paper.

早期电力工人将它用作涂料，隔离缠绕在一起线圈，还将注满了紫胶纸一层层地压紧制成单独绝缘物。

The wax molds are dipped into waterglass solution, with surface coated by the solution.

将蜡件组浸入有玻璃等涂料的缸中，涂上涂料。

He is a man of gentle mold.

他是个性格温和的人。

Try to compact the sand into the mold.

设法把这沙土堆积到模子里。

The sweatful practice sessions mold mighty football teams.

一串汗流浃背的训练磨练出实力强大的足球队。

One method to make casting sand mold directly from the bozzetto(mud-draft) of the sculpture is introduced.

介绍一种在雕塑泥稿外直接制作铸的方法。

Or deny it entry into your heart with excuss molded from doubt or insecurity.

或者际遇疑虑或不安全感的借口来拒绝它进入你的内心。

The reason of gas-hole defects occured in steel casting for molding eroduction line was analyzed.

结合多年的生产实践,分析了湿平生产线上铸钢件产生气孔的原因,介绍了预防铸钢件气孔的措施。

But in fact, T. rex broke the tyrannosaur mold, nearly tripling in body mass over its predecessors.

不过，霸王龙的确突破了暴龙类的形象，体重也几乎是先前的三倍。

Cold upset female die of fillister head is the key mold in the manufacturing process of heading bolt.

冷镦圆头凹模是冷镦螺栓生产过程中的关键模具。

The molds having saccharifying enzyme capable of dehydrolyzing uncooked starch are Aspergillus niger, Aspergillus awamori,Rhizopus and endomycopsis fibuligera etc.

具有解生淀粉能力的糖化酶的霉菌包括黑曲霉、泡盛曲霉、根霉、罗尔伏格菌和扣囊拟内孢霉等。

Design and manufacture methods of injection mold for the defecator body were introduced,and working process of mold was stated.

介绍了清净管体注射模的设计与制方法,并阐述了模具的工作过程。

Its main parts was the half-calotte Metal-Rubber manufactured by the new technics of facture and advanced mold.

限位器主要构件为带边沿帽的半球壳状金属橡胶件。

Bactria food poisoning:The mold, halococci and deformities rod, and staphylococcus aureus...etc. in sand hilus cause.

由沙门菌、嗜盐菌、变形杆菌、金黄色葡萄球菌等引起。

Abstract: Cold upset female die of fillister head is the key mold in the manufacturing process of heading bolt.

摘 要: 冷镦圆头凹模是冷镦螺栓生产过程中的关键模具。

Aplanospore A nonmotile spore , characteristic of the pin molds and certain green algae of the phyla Clorophyta and Chrysomonada.

不能游动的孢子，是绿藻门中某些绿藻的特征。

Good experiences of plastic, sheet metal and magnalium alloy parts design - Good knowledge of injection mold, stamping die and die-casting mold.

★ 熟悉塑胶材料及其模具，熟悉钣金冲压及其模具，熟悉镁铝合金的压铸工艺和结构设计。

The manual stamping or casting is used to mold eave tile, drip tile, tile with animals, nail head and glassless window.

琉璃瓦中的勾头，滴瓦件以及走兽、钉帽、花窗和正吻、垂兽等构件采用手工成或注浆成。

We have ensured our products’ trimness in appearance and excellence in quality through a centralized management system of storing finished mold products.

统一的模具存放管理措施，保证模具外观上的整洁及品质上的精准。

SEM was used to observe nucleation site of Co particles, and energy spectrum analysed phase composition of white matter in endosexine of mold.

借助扫描电镜观察到细化的叶片表面的钴微粒形核核心,通过能谱分析手段,研究壳内表层的白色物质的相组成。

Early electrical workers used it as a coating to insulate coils, and molded it into stand-alone insulators by pressing together layers of shellac-impreg-nated paper.

早期的电力工人将它用作涂料，隔离缠绕在一起的线圈，还将注满了紫胶的纸一层层地压紧制成单独的绝缘物。

The wax molds are dipped into waterglass solution, with surface coated by the solution.

将蜡件组浸入含有水玻璃等涂料缸中，涂上涂料。

He is a man of gentle mold.

他是个性格温和人。

Try to compact the sand into the mold.

设法把这沙土堆积到子里。

The sweatful practice sessions mold mighty football teams.

一串汗流浃背训练磨练出实力强大足球队。

One method to make casting sand mold directly from the bozzetto(mud-draft) of the sculpture is introduced.

介绍一种在雕塑泥稿外直接制作铸造砂型方法。

Or deny it entry into your heart with excuss molded from doubt or insecurity.

或者际遇疑虑或不安全感借口来拒绝它进入你内心。

The reason of gas-hole defects occured in steel casting for molding eroduction line was analyzed.

结合多年生产实践,分析了湿型砂水平造型生产线上铸钢件产生原因,介绍了预防铸钢件措施。

But in fact, T. rex broke the tyrannosaur mold, nearly tripling in body mass over its predecessors.

不过，霸王龙确突破了暴龙类形象，体重也几乎是先前三倍。

Cold upset female die of fillister head is the key mold in the manufacturing process of heading bolt.

冷镦圆头凹是冷镦螺栓生产过程中关键具。

The molds having saccharifying enzyme capable of dehydrolyzing uncooked starch are Aspergillus niger, Aspergillus awamori,Rhizopus and endomycopsis fibuligera etc.

具有水解生淀粉能力糖化酶霉菌包括黑曲霉、泡盛曲霉、根霉、罗尔伏格菌和扣囊拟内孢霉等。

Design and manufacture methods of injection mold for the defecator body were introduced,and working process of mold was stated.

介绍了清净管体注射设计与制造方法,并阐述了具工作过程。

Its main parts was the half-calotte Metal-Rubber manufactured by the new technics of facture and advanced mold.

限位器主要构件为带边沿帽半球壳状金属橡胶件。

Bactria food poisoning:The mold, halococci and deformities rod, and staphylococcus aureus...etc. in sand hilus cause.

由沙门菌、嗜盐菌、变形杆菌、金黄色葡萄球菌等引起。

Abstract: Cold upset female die of fillister head is the key mold in the manufacturing process of heading bolt.

摘 要: 冷镦圆头凹是冷镦螺栓生产过程中关键具。

Aplanospore A nonmotile spore , characteristic of the pin molds and certain green algae of the phyla Clorophyta and Chrysomonada.

不能游动孢子，是绿藻门中某些绿藻特征。

Good experiences of plastic, sheet metal and magnalium alloy parts design - Good knowledge of injection mold, stamping die and die-casting mold.

★ 熟悉塑胶材料及其具，熟悉钣金冲压及其具，熟悉镁铝合金压铸工艺和结构设计。

The manual stamping or casting is used to mold eave tile, drip tile, tile with animals, nail head and glassless window.

琉璃瓦中勾头，滴水瓦件以及走兽、钉帽、花窗和正吻、垂兽等构件采用手工成型或注浆成型。

We have ensured our products’ trimness in appearance and excellence in quality through a centralized management system of storing finished mold products.

统一具存放管理措施，保证具外观上整洁及品质上精准。

SEM was used to observe nucleation site of Co particles, and energy spectrum analysed phase composition of white matter in endosexine of mold.

借助扫描电镜观察到细化叶片表面钴微粒形核核心,通过能谱分析手段,研究型壳内表层白色物质相组成。

Early electrical workers used it as a coating to insulate coils, and molded it into stand-alone insulators by pressing together layers of shellac-impreg-nated paper.

早期电力工人将它用作涂料，隔离缠绕在一起线圈，还将注满了紫胶纸一层层地压紧制成单独绝缘物。

The wax molds are dipped into waterglass solution, with surface coated by the solution.

将蜡件组浸入含有水玻璃等涂料缸中，涂上涂料。

He is a man of gentle mold.

他是个性格温和人。

Try to compact the sand into the mold.

设法把这沙土堆积到模子里。

The sweatful practice sessions mold mighty football teams.

一串汗流浃背训练磨练出实力强大足球队。

One method to make casting sand mold directly from the bozzetto(mud-draft) of the sculpture is introduced.

介绍一种在雕塑泥稿外直接制作造砂型方法。

Or deny it entry into your heart with excuss molded from doubt or insecurity.

或者际遇疑虑或不安全感借口来拒绝它进入你内心。

The reason of gas-hole defects occured in steel casting for molding eroduction line was analyzed.

结合多年生产实践,分析了湿型砂水平造型生产线上钢件产生气孔原因,介绍了预防钢件气孔措施。

But in fact, T. rex broke the tyrannosaur mold, nearly tripling in body mass over its predecessors.

不过，霸王龙确突破了暴龙象，体重也几乎是先前三倍。

Cold upset female die of fillister head is the key mold in the manufacturing process of heading bolt.

冷镦圆头凹模是冷镦螺栓生产过程中关键模具。

The molds having saccharifying enzyme capable of dehydrolyzing uncooked starch are Aspergillus niger, Aspergillus awamori,Rhizopus and endomycopsis fibuligera etc.

具有水解生淀粉能力糖化酶霉菌包括黑曲霉、泡盛曲霉、根霉、罗尔伏格菌和扣囊拟内孢霉等。

Design and manufacture methods of injection mold for the defecator body were introduced,and working process of mold was stated.

介绍了清净管体注射模设计与制造方法,并阐述了模具工作过程。

Its main parts was the half-calotte Metal-Rubber manufactured by the new technics of facture and advanced mold.

限位器主要构件为带边沿帽半球壳状金属胶件。

Bactria food poisoning:The mold, halococci and deformities rod, and staphylococcus aureus...etc. in sand hilus cause.

由沙门菌、嗜盐菌、变杆菌、金黄色葡萄球菌等引起。

Abstract: Cold upset female die of fillister head is the key mold in the manufacturing process of heading bolt.

摘 要: 冷镦圆头凹模是冷镦螺栓生产过程中关键模具。

Aplanospore A nonmotile spore , characteristic of the pin molds and certain green algae of the phyla Clorophyta and Chrysomonada.

不能游动孢子，是绿藻门中某些绿藻特征。

Good experiences of plastic, sheet metal and magnalium alloy parts design - Good knowledge of injection mold, stamping die and die-casting mold.

★ 熟悉塑胶材料及其模具，熟悉钣金冲压及其模具，熟悉镁铝合金压工艺和结构设计。

The manual stamping or casting is used to mold eave tile, drip tile, tile with animals, nail head and glassless window.

琉璃瓦中勾头，滴水瓦件以及走兽、钉帽、花窗和正吻、垂兽等构件采用手工成型或注浆成型。

We have ensured our products’ trimness in appearance and excellence in quality through a centralized management system of storing finished mold products.

统一模具存放管理措施，保证模具外观上整洁及品质上精准。

SEM was used to observe nucleation site of Co particles, and energy spectrum analysed phase composition of white matter in endosexine of mold.

借助扫描电镜观察到细化叶片表面钴微粒核核心,通过能谱分析手段,研究型壳内表层白色物质相组成。

Early electrical workers used it as a coating to insulate coils, and molded it into stand-alone insulators by pressing together layers of shellac-impreg-nated paper.

早期电力工人将它用作涂料，隔离缠绕在一起线圈，还将注满了紫胶纸一层层地压紧制成单独绝缘物。

The wax molds are dipped into waterglass solution, with surface coated by the solution.

将蜡件组浸入含有水玻璃等涂料的缸中，涂上涂料。

He is a man of gentle mold.

他是个性格温和的人。

Try to compact the sand into the mold.

设法把这沙土堆积到模子里。

The sweatful practice sessions mold mighty football teams.

一串汗流浃背的训练磨练出实力强大的足球队。

One method to make casting sand mold directly from the bozzetto(mud-draft) of the sculpture is introduced.

介绍一种在雕泥稿外直接制作铸造砂型的方法。

Or deny it entry into your heart with excuss molded from doubt or insecurity.

或者际遇疑虑或不安全感的借口来拒绝它进入你的内心。

The reason of gas-hole defects occured in steel casting for molding eroduction line was analyzed.

结合多年的生产实践,分析了湿型砂水平造型生产线上铸钢件产生气孔的原因,介绍了预防铸钢件气孔的措施。

But in fact, T. rex broke the tyrannosaur mold, nearly tripling in body mass over its predecessors.

不过，霸王龙的确突破了暴龙类的形象，体重也几乎是先前的三倍。

Cold upset female die of fillister head is the key mold in the manufacturing process of heading bolt.

冷镦圆头凹模是冷镦螺栓生产过程中的关键模具。

The molds having saccharifying enzyme capable of dehydrolyzing uncooked starch are Aspergillus niger, Aspergillus awamori,Rhizopus and endomycopsis fibuligera etc.

具有水解生力的糖化酶的霉菌包括黑曲霉、泡盛曲霉、根霉、罗尔伏格菌和扣囊拟内孢霉等。

Design and manufacture methods of injection mold for the defecator body were introduced,and working process of mold was stated.

介绍了清净管体射模的设计与制造方法,并阐述了模具的工作过程。

Its main parts was the half-calotte Metal-Rubber manufactured by the new technics of facture and advanced mold.

限位器主要构件为带边沿帽的半球壳状金属橡胶件。

Bactria food poisoning:The mold, halococci and deformities rod, and staphylococcus aureus...etc. in sand hilus cause.

由沙门菌、嗜盐菌、变形杆菌、金黄色葡萄球菌等引起。

Abstract: Cold upset female die of fillister head is the key mold in the manufacturing process of heading bolt.

摘 要: 冷镦圆头凹模是冷镦螺栓生产过程中的关键模具。

Aplanospore A nonmotile spore , characteristic of the pin molds and certain green algae of the phyla Clorophyta and Chrysomonada.

不游动的孢子，是绿藻门中某些绿藻的特征。

Good experiences of plastic, sheet metal and magnalium alloy parts design - Good knowledge of injection mold, stamping die and die-casting mold.

★ 熟悉胶材料及其模具，熟悉钣金冲压及其模具，熟悉镁铝合金的压铸工艺和结构设计。

The manual stamping or casting is used to mold eave tile, drip tile, tile with animals, nail head and glassless window.

琉璃瓦中的勾头，滴水瓦件以及走兽、钉帽、花窗和正吻、垂兽等构件采用手工成型或浆成型。

We have ensured our products’ trimness in appearance and excellence in quality through a centralized management system of storing finished mold products.

统一的模具存放管理措施，保证模具外观上的整洁及品质上的精准。

SEM was used to observe nucleation site of Co particles, and energy spectrum analysed phase composition of white matter in endosexine of mold.

借助扫描电镜观察到细化的叶片表面的钴微粒形核核心,通过谱分析手段,研究型壳内表层的白色物质的相组成。

Early electrical workers used it as a coating to insulate coils, and molded it into stand-alone insulators by pressing together layers of shellac-impreg-nated paper.

早期的电力工人将它用作涂料，隔离缠绕在一起的线圈，还将满了紫胶的纸一层层地压紧制成单独的绝缘物。

The wax molds are dipped into waterglass solution, with surface coated by the solution.

将蜡件组浸入含有水玻璃等涂料的缸中，涂上涂料。

He is a man of gentle mold.

他是个性格温和的人。

Try to compact the sand into the mold.

设法把这沙土堆积到子里。

The sweatful practice sessions mold mighty football teams.

一串汗流浃背的训练磨练出实力强大的足球队。

One method to make casting sand mold directly from the bozzetto(mud-draft) of the sculpture is introduced.

介绍一种在雕塑泥稿外直接制作造砂型的方法。

Or deny it entry into your heart with excuss molded from doubt or insecurity.

或者际遇疑虑或不安全感的借口来拒绝它进入你的内心。

The reason of gas-hole defects occured in steel casting for molding eroduction line was analyzed.

结合多年的生产实践,分析了湿型砂水平造型生产线上钢件产生气孔的原因,介绍了预防钢件气孔的措施。

But in fact, T. rex broke the tyrannosaur mold, nearly tripling in body mass over its predecessors.

不过，霸王龙的确突破了暴龙类的形象，体重也几乎是先前的三倍。

Cold upset female die of fillister head is the key mold in the manufacturing process of heading bolt.

头凹是螺栓生产过程中的关键具。

The molds having saccharifying enzyme capable of dehydrolyzing uncooked starch are Aspergillus niger, Aspergillus awamori,Rhizopus and endomycopsis fibuligera etc.

具有水解生淀粉能力的糖化酶的霉菌包括黑曲霉、泡盛曲霉、根霉、罗尔伏格菌和扣囊拟内孢霉等。

Design and manufacture methods of injection mold for the defecator body were introduced,and working process of mold was stated.

介绍了清净管体注射的设计与制造方法,并阐述了具的工作过程。

Its main parts was the half-calotte Metal-Rubber manufactured by the new technics of facture and advanced mold.

限位器主要构件为带边沿帽的半球壳状金属橡胶件。

Bactria food poisoning:The mold, halococci and deformities rod, and staphylococcus aureus...etc. in sand hilus cause.

由沙门菌、嗜盐菌、变形杆菌、金黄色葡萄球菌等引起。

Abstract: Cold upset female die of fillister head is the key mold in the manufacturing process of heading bolt.

摘 要: 头凹是螺栓生产过程中的关键具。

Aplanospore A nonmotile spore , characteristic of the pin molds and certain green algae of the phyla Clorophyta and Chrysomonada.

不能游动的孢子，是绿藻门中某些绿藻的特征。

Good experiences of plastic, sheet metal and magnalium alloy parts design - Good knowledge of injection mold, stamping die and die-casting mold.

★ 熟悉塑胶材料及其具，熟悉钣金冲压及其具，熟悉镁铝合金的压工艺和结构设计。

The manual stamping or casting is used to mold eave tile, drip tile, tile with animals, nail head and glassless window.

琉璃瓦中的勾头，滴水瓦件以及走兽、钉帽、花窗和正吻、垂兽等构件采用手工成型或注浆成型。

We have ensured our products’ trimness in appearance and excellence in quality through a centralized management system of storing finished mold products.

统一的具存放管理措施，保证具外观上的整洁及品质上的精准。

SEM was used to observe nucleation site of Co particles, and energy spectrum analysed phase composition of white matter in endosexine of mold.

借助扫描电镜观察到细化的叶片表面的钴微粒形核核心,通过能谱分析手段,研究型壳内表层的白色物质的相组成。

Early electrical workers used it as a coating to insulate coils, and molded it into stand-alone insulators by pressing together layers of shellac-impreg-nated paper.

早期的电力工人将它用作涂料，隔离缠绕在一起的线圈，还将注满了紫胶的纸一层层地压紧制成单独的绝缘物。

The wax molds are dipped into waterglass solution, with surface coated by the solution.

将蜡件组浸入含有水玻璃等涂料缸中，涂上涂料。

He is a man of gentle mold.

他是个性格温和人。

Try to compact the sand into the mold.

设法把这沙土堆积到子里。

The sweatful practice sessions mold mighty football teams.

一串汗流浃背训练磨练出实力强大足球队。

One method to make casting sand mold directly from the bozzetto(mud-draft) of the sculpture is introduced.

介绍一种在雕塑泥稿外直接制作铸造砂型方法。

Or deny it entry into your heart with excuss molded from doubt or insecurity.

或者际遇疑虑或不安全感借口来拒绝它进入你内心。

The reason of gas-hole defects occured in steel casting for molding eroduction line was analyzed.

结合多年生产实践,分析了湿型砂水平造型生产线上铸钢件产生原因,介绍了预防铸钢件措施。

But in fact, T. rex broke the tyrannosaur mold, nearly tripling in body mass over its predecessors.

不过，霸王龙确突破了暴龙类形象，体重也几乎是先前三倍。

Cold upset female die of fillister head is the key mold in the manufacturing process of heading bolt.

冷镦圆头凹是冷镦螺栓生产过程中关键具。

The molds having saccharifying enzyme capable of dehydrolyzing uncooked starch are Aspergillus niger, Aspergillus awamori,Rhizopus and endomycopsis fibuligera etc.

具有水解生淀粉能力糖化酶霉菌包括黑曲霉、泡盛曲霉、根霉、罗尔伏格菌和扣囊拟内孢霉等。

Design and manufacture methods of injection mold for the defecator body were introduced,and working process of mold was stated.

介绍了清净管体注射设计与制造方法,并阐述了具工作过程。

Its main parts was the half-calotte Metal-Rubber manufactured by the new technics of facture and advanced mold.

限位器主要构件为带边沿帽半球壳状金属橡胶件。

Bactria food poisoning:The mold, halococci and deformities rod, and staphylococcus aureus...etc. in sand hilus cause.

由沙门菌、嗜盐菌、变形杆菌、金黄色葡萄球菌等引起。

Abstract: Cold upset female die of fillister head is the key mold in the manufacturing process of heading bolt.

摘 要: 冷镦圆头凹是冷镦螺栓生产过程中关键具。

Aplanospore A nonmotile spore , characteristic of the pin molds and certain green algae of the phyla Clorophyta and Chrysomonada.

不能游动孢子，是绿藻门中某些绿藻特征。

Good experiences of plastic, sheet metal and magnalium alloy parts design - Good knowledge of injection mold, stamping die and die-casting mold.

★ 熟悉塑胶材料及其具，熟悉钣金冲压及其具，熟悉镁铝合金压铸工艺和结构设计。

The manual stamping or casting is used to mold eave tile, drip tile, tile with animals, nail head and glassless window.

琉璃瓦中勾头，滴水瓦件以及走兽、钉帽、花窗和正吻、垂兽等构件采用手工成型或注浆成型。

We have ensured our products’ trimness in appearance and excellence in quality through a centralized management system of storing finished mold products.

统一具存放管理措施，保证具外观上整洁及品质上精准。

SEM was used to observe nucleation site of Co particles, and energy spectrum analysed phase composition of white matter in endosexine of mold.

借助扫描电镜观察到细化叶片表面钴微粒形核核心,通过能谱分析手段,研究型壳内表层白色物质相组成。

Early electrical workers used it as a coating to insulate coils, and molded it into stand-alone insulators by pressing together layers of shellac-impreg-nated paper.

早期电力工人将它用作涂料，隔离缠绕在一起线圈，还将注满了紫胶纸一层层地压紧制成单独绝缘物。

The wax molds are dipped into waterglass solution, with surface coated by the solution.

件组浸入含有水玻璃等涂料的缸中，涂上涂料。

He is a man of gentle mold.

他是个性格温和的人。

Try to compact the sand into the mold.

设法把这沙土堆积到模子里。

The sweatful practice sessions mold mighty football teams.

一串汗流浃背的训练磨练出实力强大的足球队。

One method to make casting sand mold directly from the bozzetto(mud-draft) of the sculpture is introduced.

介绍一种在雕塑泥稿外直接制作铸造砂型的方法。

Or deny it entry into your heart with excuss molded from doubt or insecurity.

或疑虑或不安全感的借口来拒绝它进入你的内心。

The reason of gas-hole defects occured in steel casting for molding eroduction line was analyzed.

结合多年的生产实践,分析了湿型砂水平造型生产线上铸钢件产生气孔的原因,介绍了预防铸钢件气孔的措施。

But in fact, T. rex broke the tyrannosaur mold, nearly tripling in body mass over its predecessors.

不过，霸王龙的确突破了暴龙类的形象，体重也几乎是先前的三倍。

Cold upset female die of fillister head is the key mold in the manufacturing process of heading bolt.

冷镦圆头凹模是冷镦螺栓生产过程中的关键模具。

The molds having saccharifying enzyme capable of dehydrolyzing uncooked starch are Aspergillus niger, Aspergillus awamori,Rhizopus and endomycopsis fibuligera etc.

具有水解生淀粉能力的糖化酶的霉菌包括黑曲霉、泡盛曲霉、根霉、罗尔伏格菌和扣囊拟内孢霉等。

Design and manufacture methods of injection mold for the defecator body were introduced,and working process of mold was stated.

介绍了清净管体注射模的设计与制造方法,并阐述了模具的工作过程。

Its main parts was the half-calotte Metal-Rubber manufactured by the new technics of facture and advanced mold.

限位器主要构件为带边沿帽的半球壳状金属橡胶件。

Bactria food poisoning:The mold, halococci and deformities rod, and staphylococcus aureus...etc. in sand hilus cause.

由沙门菌、嗜盐菌、变形杆菌、金黄色葡萄球菌等引起。

Abstract: Cold upset female die of fillister head is the key mold in the manufacturing process of heading bolt.

摘 要: 冷镦圆头凹模是冷镦螺栓生产过程中的关键模具。

Aplanospore A nonmotile spore , characteristic of the pin molds and certain green algae of the phyla Clorophyta and Chrysomonada.

不能游动的孢子，是绿藻门中某些绿藻的特征。

Good experiences of plastic, sheet metal and magnalium alloy parts design - Good knowledge of injection mold, stamping die and die-casting mold.

★ 熟悉塑胶材料及其模具，熟悉钣金冲压及其模具，熟悉镁铝合金的压铸工艺和结构设计。

The manual stamping or casting is used to mold eave tile, drip tile, tile with animals, nail head and glassless window.

琉璃瓦中的勾头，滴水瓦件以及走兽、钉帽、花窗和正吻、垂兽等构件采用手工成型或注浆成型。

We have ensured our products’ trimness in appearance and excellence in quality through a centralized management system of storing finished mold products.

统一的模具存放管理措施，保证模具外观上的整洁及品质上的精准。

SEM was used to observe nucleation site of Co particles, and energy spectrum analysed phase composition of white matter in endosexine of mold.

借助扫描电镜观察到细化的叶片表面的钴微粒形核核心,通过能谱分析手段,研究型壳内表层的白色物质的相组成。

Early electrical workers used it as a coating to insulate coils, and molded it into stand-alone insulators by pressing together layers of shellac-impreg-nated paper.

早期的电力工人它用作涂料，隔离缠绕在一起的线圈，还注满了紫胶的纸一层层地压紧制成单独的绝缘物。

The wax molds are dipped into waterglass solution, with surface coated by the solution.

将蜡件组浸入含有水玻璃等涂料的缸中，涂上涂料。

He is a man of gentle mold.

他是个性格温和的人。

Try to compact the sand into the mold.

设法把这沙土堆积到模子里。

The sweatful practice sessions mold mighty football teams.

一串汗流浃背的训练磨练出力强大的足球队。

One method to make casting sand mold directly from the bozzetto(mud-draft) of the sculpture is introduced.

介绍一种在雕塑泥稿外直接制作铸造砂的方法。

Or deny it entry into your heart with excuss molded from doubt or insecurity.

或者际遇疑虑或不安全感的借口来拒绝它进入你的内心。

The reason of gas-hole defects occured in steel casting for molding eroduction line was analyzed.

结合多年的践,分析了湿砂水平造线上铸钢件气孔的原因,介绍了预防铸钢件气孔的措施。

But in fact, T. rex broke the tyrannosaur mold, nearly tripling in body mass over its predecessors.

不过，霸王龙的确突破了暴龙类的形象，体重也几乎是先前的三倍。

Cold upset female die of fillister head is the key mold in the manufacturing process of heading bolt.

冷镦圆头凹模是冷镦螺栓过程中的关键模具。

The molds having saccharifying enzyme capable of dehydrolyzing uncooked starch are Aspergillus niger, Aspergillus awamori,Rhizopus and endomycopsis fibuligera etc.

具有水解淀粉能力的糖化酶的霉菌包括黑曲霉、泡盛曲霉、根霉、罗尔伏格菌和扣囊拟内孢霉等。

Design and manufacture methods of injection mold for the defecator body were introduced,and working process of mold was stated.

介绍了清净管体注射模的设计与制造方法,并阐述了模具的工作过程。

Its main parts was the half-calotte Metal-Rubber manufactured by the new technics of facture and advanced mold.

限位器主要构件为带边沿帽的半球壳状橡胶件。

Bactria food poisoning:The mold, halococci and deformities rod, and staphylococcus aureus...etc. in sand hilus cause.

由沙门菌、嗜盐菌、变形杆菌、黄色葡萄球菌等引起。

Abstract: Cold upset female die of fillister head is the key mold in the manufacturing process of heading bolt.

摘 要: 冷镦圆头凹模是冷镦螺栓过程中的关键模具。

Aplanospore A nonmotile spore , characteristic of the pin molds and certain green algae of the phyla Clorophyta and Chrysomonada.

不能游动的孢子，是绿藻门中某些绿藻的特征。

Good experiences of plastic, sheet metal and magnalium alloy parts design - Good knowledge of injection mold, stamping die and die-casting mold.

★ 熟悉塑胶材料及其模具，熟悉钣冲压及其模具，熟悉镁铝合的压铸工艺和结构设计。

The manual stamping or casting is used to mold eave tile, drip tile, tile with animals, nail head and glassless window.

琉璃瓦中的勾头，滴水瓦件以及走兽、钉帽、花窗和正吻、垂兽等构件采用手工成或注浆成。

We have ensured our products’ trimness in appearance and excellence in quality through a centralized management system of storing finished mold products.

统一的模具存放管理措施，保证模具外观上的整洁及品质上的精准。

SEM was used to observe nucleation site of Co particles, and energy spectrum analysed phase composition of white matter in endosexine of mold.

借助扫描电镜观察到细化的叶片表面的钴微粒形核核心,通过能谱分析手段,研究壳内表层的白色物质的相组成。

Early electrical workers used it as a coating to insulate coils, and molded it into stand-alone insulators by pressing together layers of shellac-impreg-nated paper.

早期的电力工人将它用作涂料，隔离缠绕在一起的线圈，还将注满了紫胶的纸一层层地压紧制成单独的绝缘物。