The reason of gas-hole defects occured in steel casting for molding eroduction line was analyzed.

结合多年的生产实践,分析了型水平造型生产线上铸钢件产生气孔的原因,介绍了预防铸钢件气孔的措施。

The results indicate the melt processible fluoroplastics PVDF has good processing property of injection molding.

结果显示可熔融氟塑料PVDF具有较好的注射成型加工性能。

This entirely reflects the author's thinking pattern of hetero-topia in his molding the image of China.

这些都反映了作者构筑中国形象时采用的是异托邦思维式。

Straw, a kind of natural biodegradable material, was used as reinforced fibers for preparing nonrecurring biodegradable flowerpots by compression molding technology.

采用廉价的秸秆为增强材料,以淀粉为基体材料,通过压成型制备出一次性可生物降解花盆。

Methods of enhancing dispersing mixability in dynamic molding process,the structure of the dynamic mixing extruder and its operation principles were introduced.

介绍了基于动态成型过程强化分散混炼的方法以及实现这些方法的动态混炼挤出的结构及工作原理。

The molding method,process,and the equipment of thermoset runnerless injection molding have been discussed in this paper.

论述了无流道热固性塑料注射成型的方法、工艺、设备和具设计方面的问题。

Developed excogitates of two decumbence and one hovizoutal molding die, realized increasing height of branch pipe of heat pressure tee and reducing radius of synodical arc of tee.

研制出两套立式具和一套卧式具,实现了用工艺方法增加热挤压三通支管高度,缩小三通相贯区内拐角处圆弧半径的目的。

Beam side form shall be installed after all work inspected and accepted such as beam rebar work, cushion block laying, steel inserts installation, steel doweling and pocket molding bed, etc.

绑扎梁筋，垫保护层垫块，安放埋件、插筋、预留孔胎等，经检查合格后扣梁侧。

The reason of gas-hole defects occured in steel casting for molding eroduction line was analyzed.

结合多年的生产实践,分析了湿型砂水平型生产线上钢件产生气孔的原因,介绍了预防钢件气孔的措施。

The results indicate the melt processible fluoroplastics PVDF has good processing property of injection molding.

结果显示可熔融氟塑料PVDF具有较好的注射成型加工性能。

This entirely reflects the author's thinking pattern of hetero-topia in his molding the image of China.

这些都反映了作者构筑中国形象时采用的是异托邦思维式。

Straw, a kind of natural biodegradable material, was used as reinforced fibers for preparing nonrecurring biodegradable flowerpots by compression molding technology.

采用廉价的秸秆为增强材料,以淀粉为基体材料,通过压成型制备出一次性可生物降解花盆。

Methods of enhancing dispersing mixability in dynamic molding process,the structure of the dynamic mixing extruder and its operation principles were introduced.

介绍了基于动态成型过程强化分散混炼的方法以及实现这些方法的动态混炼挤出机的结构及工作原理。

The molding method,process,and the equipment of thermoset runnerless injection molding have been discussed in this paper.

论述了无流道热固性塑料注射成型的方法、工艺、设备和具设计方面的问题。

Developed excogitates of two decumbence and one hovizoutal molding die, realized increasing height of branch pipe of heat pressure tee and reducing radius of synodical arc of tee.

研制出两套立式具和一套卧式具,实现了用工艺方法增加热挤压三通支管高度,缩小三通相贯区内拐角处圆弧半径的目的。

Beam side form shall be installed after all work inspected and accepted such as beam rebar work, cushion block laying, steel inserts installation, steel doweling and pocket molding bed, etc.

绑扎梁筋，垫保护层垫块，安放埋件、插筋、预留孔胎等，经检查合格后扣梁侧。

The reason of gas-hole defects occured in steel casting for molding eroduction line was analyzed.

结多年的实践,分析了湿型砂水平造型线上铸钢件气孔的原因,介绍了预防铸钢件气孔的措施。

The results indicate the melt processible fluoroplastics PVDF has good processing property of injection molding.

结果显示可熔融氟塑料PVDF具有较好的注射成型加工性能。

This entirely reflects the author's thinking pattern of hetero-topia in his molding the image of China.

这些都反映了作者构筑中国形象时采用的是异托邦思维模式。

Straw, a kind of natural biodegradable material, was used as reinforced fibers for preparing nonrecurring biodegradable flowerpots by compression molding technology.

采用廉价的秸秆为增强材料,以淀粉为基体材料,通过模压成型制备出一次性可物降解花盆。

Methods of enhancing dispersing mixability in dynamic molding process,the structure of the dynamic mixing extruder and its operation principles were introduced.

介绍了基于动态成型过程强化分散混炼的方法以及实现这些方法的动态混炼挤出机的结构及工作原理。

The molding method,process,and the equipment of thermoset runnerless injection molding have been discussed in this paper.

论述了无流道热固性塑料注射成型的方法、工艺、设备和模具设计方面的问题。

Developed excogitates of two decumbence and one hovizoutal molding die, realized increasing height of branch pipe of heat pressure tee and reducing radius of synodical arc of tee.

研制出两套立式模具和一套卧式模具,实现了用工艺方法增加热挤压三通支管高度,缩小三通相贯区内拐角处圆弧半径的目的。

Beam side form shall be installed after all work inspected and accepted such as beam rebar work, cushion block laying, steel inserts installation, steel doweling and pocket molding bed, etc.

绑扎梁筋，垫保护层垫块，安放埋件、插筋、预留孔胎模等，经检查格后扣梁侧模。

The reason of gas-hole defects occured in steel casting for molding eroduction line was analyzed.

结合多年的生产实践,分析了湿型砂水平造型生产线上铸钢件产生气孔的原因,介绍了预防铸钢件气孔的措施。

The results indicate the melt processible fluoroplastics PVDF has good processing property of injection molding.

结果显示可熔融氟塑料PVDF有较好的注射成型加工性能。

This entirely reflects the author's thinking pattern of hetero-topia in his molding the image of China.

这些都反映了作者构筑中国形象时采用的是异托邦思维式。

Straw, a kind of natural biodegradable material, was used as reinforced fibers for preparing nonrecurring biodegradable flowerpots by compression molding technology.

采用廉价的秸秆为增强材料,以淀粉为基体材料,通过成型制备出一次性可生物降解花盆。

Methods of enhancing dispersing mixability in dynamic molding process,the structure of the dynamic mixing extruder and its operation principles were introduced.

介绍了基于动态成型过程强化分散混炼的方法以及实现这些方法的动态混炼挤出机的结构及工作原理。

The molding method,process,and the equipment of thermoset runnerless injection molding have been discussed in this paper.

论述了无流道热固性塑料注射成型的方法、工艺、设备和设计方面的问题。

Developed excogitates of two decumbence and one hovizoutal molding die, realized increasing height of branch pipe of heat pressure tee and reducing radius of synodical arc of tee.

研制出两套立式和一套卧式,实现了用工艺方法增加热挤三通支管高,缩小三通相贯区内拐角处圆弧半径的目的。

Beam side form shall be installed after all work inspected and accepted such as beam rebar work, cushion block laying, steel inserts installation, steel doweling and pocket molding bed, etc.

绑扎梁筋，垫保护层垫块，安放埋件、插筋、预留孔胎等，经检查合格后扣梁侧。

The reason of gas-hole defects occured in steel casting for molding eroduction line was analyzed.

结合多年的实践,分析了湿砂水平造线上铸钢件气孔的原因,介绍了预防铸钢件气孔的措施。

The results indicate the melt processible fluoroplastics PVDF has good processing property of injection molding.

结果显示可熔融氟塑料PVDF具有较好的注射成加工性能。

This entirely reflects the author's thinking pattern of hetero-topia in his molding the image of China.

这些都反映了作者构筑中国形象时采用的是异托邦思维模式。

Straw, a kind of natural biodegradable material, was used as reinforced fibers for preparing nonrecurring biodegradable flowerpots by compression molding technology.

采用廉价的秸秆为增强材料,以淀粉为基体材料,通过模压成制备出一次性可物降解花盆。

Methods of enhancing dispersing mixability in dynamic molding process,the structure of the dynamic mixing extruder and its operation principles were introduced.

介绍了基于动态成过程强化分散混炼的方法以及实现这些方法的动态混炼挤出机的结构及工作原理。

The molding method,process,and the equipment of thermoset runnerless injection molding have been discussed in this paper.

论述了无流道热固性塑料注射成的方法、工艺、设备和模具设计方面的问题。

Developed excogitates of two decumbence and one hovizoutal molding die, realized increasing height of branch pipe of heat pressure tee and reducing radius of synodical arc of tee.

研制出两套立式模具和一套卧式模具,实现了用工艺方法增加热挤压三通支管高度,缩小三通相贯区内拐角处圆弧半径的目的。

Beam side form shall be installed after all work inspected and accepted such as beam rebar work, cushion block laying, steel inserts installation, steel doweling and pocket molding bed, etc.

绑扎梁筋，垫保护层垫块，放埋件、插筋、预留孔胎模等，经检查合格后扣梁侧模。

The reason of gas-hole defects occured in steel casting for molding eroduction line was analyzed.

结合多年的生产实践,分析了湿砂水平造生产线上铸钢件产生气孔的原因,介绍了预防铸钢件气孔的措施。

The results indicate the melt processible fluoroplastics PVDF has good processing property of injection molding.

结果显示可熔融氟塑料PVDF具有较好的注射成加工性能。

This entirely reflects the author's thinking pattern of hetero-topia in his molding the image of China.

这些都反映了作者构筑中国形象时采用的是异托邦思维式。

Straw, a kind of natural biodegradable material, was used as reinforced fibers for preparing nonrecurring biodegradable flowerpots by compression molding technology.

采用廉价的秸秆为增强材料,以淀粉为基体材料,通过压成制备出一次性可生物降解花盆。

Methods of enhancing dispersing mixability in dynamic molding process,the structure of the dynamic mixing extruder and its operation principles were introduced.

介绍了基于动态成过程强化分散混炼的方法以及实现这些方法的动态混炼挤出机的结构及工作原理。

The molding method,process,and the equipment of thermoset runnerless injection molding have been discussed in this paper.

论述了无流道热固性塑料注射成的方法、工艺、设备和具设计方面的问题。

Developed excogitates of two decumbence and one hovizoutal molding die, realized increasing height of branch pipe of heat pressure tee and reducing radius of synodical arc of tee.

研制出两套立式具和一套卧式具,实现了用工艺方法增加热挤压三通支管高度,缩小三通相贯区内拐角处圆弧半径的目的。

Beam side form shall be installed after all work inspected and accepted such as beam rebar work, cushion block laying, steel inserts installation, steel doweling and pocket molding bed, etc.

绑扎梁筋，垫保护层垫块，安放埋件、插筋、预留孔胎等，经检查合格后扣梁侧。

The reason of gas-hole defects occured in steel casting for molding eroduction line was analyzed.

结合多年的生产实践,分析了湿砂水平造生产线上铸钢件产生气孔的原因,介绍了预防铸钢件气孔的措施。

The results indicate the melt processible fluoroplastics PVDF has good processing property of injection molding.

结果显示可熔融氟塑料PVDF具有较好的注射成加工性能。

This entirely reflects the author's thinking pattern of hetero-topia in his molding the image of China.

这些都反映了作者构筑中国形象时采用的是异托邦思维式。

Straw, a kind of natural biodegradable material, was used as reinforced fibers for preparing nonrecurring biodegradable flowerpots by compression molding technology.

采用廉价的秸秆为增强材料,以淀粉为基体材料,通过成制备出一次性可生物降解花盆。

Methods of enhancing dispersing mixability in dynamic molding process,the structure of the dynamic mixing extruder and its operation principles were introduced.

介绍了基于动态成过程强化分散混炼的方法以及实现这些方法的动态混炼挤出机的结构及工作原理。

The molding method,process,and the equipment of thermoset runnerless injection molding have been discussed in this paper.

论述了无流道热固性塑料注射成的方法、工艺、设备和具设计方面的问题。

Developed excogitates of two decumbence and one hovizoutal molding die, realized increasing height of branch pipe of heat pressure tee and reducing radius of synodical arc of tee.

研制出两套立式具和一套卧式具,实现了用工艺方法增加热挤三通支管高度,缩小三通相贯区内拐角处圆弧半径的目的。

Beam side form shall be installed after all work inspected and accepted such as beam rebar work, cushion block laying, steel inserts installation, steel doweling and pocket molding bed, etc.

绑扎梁筋，垫保护层垫块，安放埋件、插筋、预留孔胎等，经检查合格后扣梁侧。

The reason of gas-hole defects occured in steel casting for molding eroduction line was analyzed.

结合多年的实践,分析了湿砂水平造线上铸钢件气孔的原因,介绍了预防铸钢件气孔的措施。

The results indicate the melt processible fluoroplastics PVDF has good processing property of injection molding.

结果显示可熔融氟塑料PVDF具有较好的注射成加工性能。

This entirely reflects the author's thinking pattern of hetero-topia in his molding the image of China.

这些都反映了作者构筑中国形象时采用的是异托邦思维模式。

Straw, a kind of natural biodegradable material, was used as reinforced fibers for preparing nonrecurring biodegradable flowerpots by compression molding technology.

采用廉价的秸秆为增强材料,以淀粉为基体材料,通过模压成制备出一次性可物降解花盆。

Methods of enhancing dispersing mixability in dynamic molding process,the structure of the dynamic mixing extruder and its operation principles were introduced.

介绍了基于动态成过程强化分散混炼的方法以及实现这些方法的动态混炼挤出机的结构及工作原理。

The molding method,process,and the equipment of thermoset runnerless injection molding have been discussed in this paper.

论述了无流道热固性塑料注射成的方法、工艺、设备和模具设计方面的问题。

Developed excogitates of two decumbence and one hovizoutal molding die, realized increasing height of branch pipe of heat pressure tee and reducing radius of synodical arc of tee.

研制出两套立式模具和一套卧式模具,实现了用工艺方法增加热挤压三通支管高度,缩小三通相贯区内拐角处圆弧半径的目的。

Beam side form shall be installed after all work inspected and accepted such as beam rebar work, cushion block laying, steel inserts installation, steel doweling and pocket molding bed, etc.

绑扎梁筋，垫保护层垫块，放埋件、插筋、预留孔胎模等，经检查合格后扣梁侧模。

The reason of gas-hole defects occured in steel casting for molding eroduction line was analyzed.

结合生产实践,分析了湿型砂水平造型生产线上铸钢件产生气孔原因,介绍了预防铸钢件气孔措施。

The results indicate the melt processible fluoroplastics PVDF has good processing property of injection molding.

结果显示可熔融氟塑料PVDF具有较好注射成型加工性能。

This entirely reflects the author's thinking pattern of hetero-topia in his molding the image of China.

这些都反映了作者构筑中国形象时采是异托邦思维模式。

Straw, a kind of natural biodegradable material, was used as reinforced fibers for preparing nonrecurring biodegradable flowerpots by compression molding technology.

采廉价秸秆为增强材料,以淀粉为基体材料,通过模压成型制备出一次性可生物降解花盆。

Methods of enhancing dispersing mixability in dynamic molding process,the structure of the dynamic mixing extruder and its operation principles were introduced.

介绍了基于动态成型过程强化分散混炼方法以及实现这些方法动态混炼挤出机结构及工作原理。

The molding method,process,and the equipment of thermoset runnerless injection molding have been discussed in this paper.

论述了无流道热固性塑料注射成型方法、工艺、设备和模具设计方面问题。

Developed excogitates of two decumbence and one hovizoutal molding die, realized increasing height of branch pipe of heat pressure tee and reducing radius of synodical arc of tee.

研制出两套立式模具和一套卧式模具,实现了工艺方法增加热挤压三通支管高度,缩小三通相贯区内拐角处圆弧半径目。

Beam side form shall be installed after all work inspected and accepted such as beam rebar work, cushion block laying, steel inserts installation, steel doweling and pocket molding bed, etc.

绑扎梁筋，垫保护层垫块，安放埋件、插筋、预留孔胎模等，经检查合格后扣梁侧模。

The reason of gas-hole defects occured in steel casting for molding eroduction line was analyzed.

年的生产实践,分析了湿型砂水平造型生产线上铸钢件产生气孔的原因,介绍了预防铸钢件气孔的措施。

The results indicate the melt processible fluoroplastics PVDF has good processing property of injection molding.

果显示可熔融氟塑料PVDF具有较好的射成型加工性能。

This entirely reflects the author's thinking pattern of hetero-topia in his molding the image of China.

这些都反映了作者构筑中国形象时采的是异托邦思维模式。

Straw, a kind of natural biodegradable material, was used as reinforced fibers for preparing nonrecurring biodegradable flowerpots by compression molding technology.

采廉价的秸秆为增强材料,以淀粉为基体材料,通过模压成型制备出一次性可生物降解花盆。

Methods of enhancing dispersing mixability in dynamic molding process,the structure of the dynamic mixing extruder and its operation principles were introduced.

介绍了基于动态成型过程强化分散混炼的方法以及实现这些方法的动态混炼挤出机的构及工作原理。

The molding method,process,and the equipment of thermoset runnerless injection molding have been discussed in this paper.

论述了无流道热固性塑料射成型的方法、工艺、设备和模具设计方面的问题。

Developed excogitates of two decumbence and one hovizoutal molding die, realized increasing height of branch pipe of heat pressure tee and reducing radius of synodical arc of tee.

研制出两套立式模具和一套卧式模具,实现了工艺方法增加热挤压三通支管高度,缩小三通相贯区内拐角处圆弧半径的目的。

Beam side form shall be installed after all work inspected and accepted such as beam rebar work, cushion block laying, steel inserts installation, steel doweling and pocket molding bed, etc.

绑扎梁筋，垫保护层垫块，安放埋件、插筋、预留孔胎模等，经检查格后扣梁侧模。