The parametric modeling method for loxodrome normal circular-arc spiral bevel gear was presented.

给出了斜航式法向圆弧螺旋锥齿轮的参化建方法。

In this thesis, a novel computational modeling approach to design constructible shapes is introduced.

其中阴影造形法是目前重建人脸立体资料的方法中，较安全且较便宜的一个方法。

Design storm hyetograph is the essential element for hydrologic modeling analysis and storm water drainage design.

设计暴雨雨型对水文式分析与暴雨排水设计是不可或缺的基本素。

Optimization and modeling of boric acid extraction from colemanite in water saturated with carbon dioxide and sulphur dioxide gases.

在二氧化碳及二氧化硫饱和水溶液中从硬硼钙石提取硼酸最优化方案的研究。

The conception model, assembly model and parts model of pneumatic hole impinger are established by the method of intelligent modeling.

采用智能产品建的方法,建立了气动潜孔冲击器的概念型、装配型和零件型。

The current development of simulated, moving bed and fixed-bed modeling have given a new impetus to molasses desugarization by ion exclusion.

拟流动床及固定床的改进为离子排斥法提糖注入了活力。

The model of UML-BD is to hierarchize and modularize the UML model of discrete event system by using DEVS modeling technology.

型是运用DEVS规范技术对离散事件系统的UML型进行层次化、块化。

To reduce subjective factor in geostatistical modeling,non-parametrical geostatistics has become popular.This paper presents four kinds of variogram model for non-parametrical geostatistics.

为了减轻人为因素在创建型中的作用,非参的地质统计学得到发展,文章重点介绍了非参地质统计学的4种变异函型。

Erbium ions concentration is obtained by the information of measured coefficients along with modeling of double-pass backward (DPB) superfluorescent fiber source (SFS).

再利用这些系和复行后向超萤光光纤光源的拟，得到掺铒光纤的浓度。

The limit of technical policies for complex rhythmite reconstruction is developed by establishing typical model and using numerical modeling predicting method and optimal segmentation.

通过建立典型型，运用值拟预测法和最优分割法，制定了复杂韵律层重组的技术政策界限。

On basis of this model, the modeling methods and modeling flow were discussed based on data source of geological observation, drillhole, ichnography and section map.

在此基础上，探讨了在基于地质观测据、钻孔据、平面图据、剖面图据的层建方法和建流程。

Starting with the basic equation of the hydraulic system this paper deals with the mechanism modeling for double triangle boom luffer and its hydraulic system.

从液压系统的基本方程入手，对双三角钻臂变幅机构进行了机理建。

With the request of geometry modeling system and application of the concept about complexes algebraictopology in the field of industrial production , the theory of non-manifold model come into being.

工业产品几何造型技术的发展求,以及代拓扑学复形等概念引入到几何造型中,因此产生了非流形几何造型理论。

It deals with lots of factors from the process of networks modeling, node demand calculation, initial flow distribution, and the optimal design to the drawing of pipe networks and isopiestic line.

文章分三部分分别论述了管网的优化计算、管网图形的绘制和等压线图的绘制方法。

The parametric modeling method for loxodrome normal circular-arc spiral bevel gear was presented.

给出了斜航式法向圆弧螺旋锥齿轮的参数化建方法。

In this thesis, a novel computational modeling approach to design constructible shapes is introduced.

其中阴影造形法是目前重建人脸立体资料的方法中，较安全且较便宜的一个方法。

Design storm hyetograph is the essential element for hydrologic modeling analysis and storm water drainage design.

计暴雨雨型对水文式分析与暴雨排水计是不可或缺的基本素。

Optimization and modeling of boric acid extraction from colemanite in water saturated with carbon dioxide and sulphur dioxide gases.

在二氧化碳及二氧化硫饱和水溶液中从硬硼钙石提取硼酸最优化方案的研究。

The conception model, assembly model and parts model of pneumatic hole impinger are established by the method of intelligent modeling.

采用智能产品建的方法,建立了气动潜孔冲击器的概念型、装配型和零件型。

The current development of simulated, moving bed and fixed-bed modeling have given a new impetus to molasses desugarization by ion exclusion.

拟流动床及固定床的改进为离子排斥法提糖注入了活力。

The model of UML-BD is to hierarchize and modularize the UML model of discrete event system by using DEVS modeling technology.

型是运用DEVS规范技术对离散事件系统的UML型进行层次化、块化。

To reduce subjective factor in geostatistical modeling,non-parametrical geostatistics has become popular.This paper presents four kinds of variogram model for non-parametrical geostatistics.

为了减轻人为因素在创建型中的作用,非参数的地质统计学得到发展,文章重点介绍了非参数地质统计学的4种变异函数型。

Erbium ions concentration is obtained by the information of measured coefficients along with modeling of double-pass backward (DPB) superfluorescent fiber source (SFS).

再利用这些系数和复行后向超萤光光纤光源的拟，得到掺铒光纤的浓度。

The limit of technical policies for complex rhythmite reconstruction is developed by establishing typical model and using numerical modeling predicting method and optimal segmentation.

通过建立典型型，运用数值拟预测法和最优分割法，制定了复杂韵律层重组的技术政策界限。

On basis of this model, the modeling methods and modeling flow were discussed based on data source of geological observation, drillhole, ichnography and section map.

在此基础上，探讨了在基于地质观测数据、钻孔数据、平面图数据、剖面图数据的层建方法和建流程。

Starting with the basic equation of the hydraulic system this paper deals with the mechanism modeling for double triangle boom luffer and its hydraulic system.

从液压系统的基本方程入手，对双三角钻臂变幅机构进行了机理建。

With the request of geometry modeling system and application of the concept about complexes algebraictopology in the field of industrial production , the theory of non-manifold model come into being.

工业产品几何造型技术的发展求,以及代数拓扑学复形等概念引入到几何造型中,因此产生了非流形几何造型理论。

It deals with lots of factors from the process of networks modeling, node demand calculation, initial flow distribution, and the optimal design to the drawing of pipe networks and isopiestic line.

文章分三部分分别论述了管网的优化计算、管网图形的绘制和等压线图的绘制方法。

The parametric modeling method for loxodrome normal circular-arc spiral bevel gear was presented.

给出了斜航式法向圆弧螺旋锥齿轮参数化方法。

In this thesis, a novel computational modeling approach to design constructible shapes is introduced.

其中阴影造形法是目前重人脸立体资料方法中，较安全且较便宜一个方法。

Design storm hyetograph is the essential element for hydrologic modeling analysis and storm water drainage design.

摘要设计暴雨雨型对水文式分析与暴雨排水设计是不可或缺基本要素。

Optimization and modeling of boric acid extraction from colemanite in water saturated with carbon dioxide and sulphur dioxide gases.

在二氧化碳及二氧化硫饱和水溶液中从硬硼钙石提取硼酸最优化方案研究。

The conception model, assembly model and parts model of pneumatic hole impinger are established by the method of intelligent modeling.

采用智能产品方法,立了气动潜孔冲击器概念型、装配型和零件型。

The current development of simulated, moving bed and fixed-bed modeling have given a new impetus to molasses desugarization by ion exclusion.

拟流动床及固定床改进为离子排斥法提糖注入了活力。

The model of UML-BD is to hierarchize and modularize the UML model of discrete event system by using DEVS modeling technology.

型是运用DEVS规范技术对离散事件系统UML型进行层次化、块化。

To reduce subjective factor in geostatistical modeling,non-parametrical geostatistics has become popular.This paper presents four kinds of variogram model for non-parametrical geostatistics.

为了减轻人为因素在创型中作用,非参数地质统计学得到发展,文章重点介绍了非参数地质统计学4种变异函数型。

Erbium ions concentration is obtained by the information of measured coefficients along with modeling of double-pass backward (DPB) superfluorescent fiber source (SFS).

再利用这些系数和复行后向超萤光光纤光源拟，得到掺铒光纤浓度。

The limit of technical policies for complex rhythmite reconstruction is developed by establishing typical model and using numerical modeling predicting method and optimal segmentation.

通过立典型型，运用数值拟预测法和最优分割法，制定了复杂韵律层重组技术政策界限。

On basis of this model, the modeling methods and modeling flow were discussed based on data source of geological observation, drillhole, ichnography and section map.

在此基础上，探讨了在基于地质观测数据、钻孔数据、平面图数据、剖面图数据断层方法和流程。

Starting with the basic equation of the hydraulic system this paper deals with the mechanism modeling for double triangle boom luffer and its hydraulic system.

从液压系统基本方程入手，对双三角钻臂变幅机构进行了机理。

With the request of geometry modeling system and application of the concept about complexes algebraictopology in the field of industrial production , the theory of non-manifold model come into being.

工业产品几何造型技术发展要求,以及代数拓扑学复形等概念引入到几何造型中,因此产生了非流形几何造型理论。

It deals with lots of factors from the process of networks modeling, node demand calculation, initial flow distribution, and the optimal design to the drawing of pipe networks and isopiestic line.

文章分三部分分别论述了管网优化计算、管网图形绘制和等压线图绘制方法。

The parametric modeling method for loxodrome normal circular-arc spiral bevel gear was presented.

给出了斜航式法向圆弧螺旋锥齿轮的参数化建方法。

In this thesis, a novel computational modeling approach to design constructible shapes is introduced.

其中阴影造形法是目前重建人脸立体资料的方法中，较安全且较便宜的一个方法。

Design storm hyetograph is the essential element for hydrologic modeling analysis and storm water drainage design.

摘要设计暴雨雨型对水文式分析与暴雨排水设计是不可或缺的基本要素。

Optimization and modeling of boric acid extraction from colemanite in water saturated with carbon dioxide and sulphur dioxide gases.

在二氧化碳及二氧化硫饱和水溶液中从硬硼钙石提取硼酸最优化方案的。

The conception model, assembly model and parts model of pneumatic hole impinger are established by the method of intelligent modeling.

用智能产品建的方法,建立了气动潜孔冲击器的概念型、装配型和零件型。

The current development of simulated, moving bed and fixed-bed modeling have given a new impetus to molasses desugarization by ion exclusion.

拟流动床及固定床的改进为离子排斥法提糖注入了活力。

The model of UML-BD is to hierarchize and modularize the UML model of discrete event system by using DEVS modeling technology.

型是运用DEVS规范技对离散事件系统的UML型进行层次化、块化。

To reduce subjective factor in geostatistical modeling,non-parametrical geostatistics has become popular.This paper presents four kinds of variogram model for non-parametrical geostatistics.

为了减轻人为因素在创建型中的作用,非参数的地质统计学得到发展,文章重点介绍了非参数地质统计学的4种变异函数型。

Erbium ions concentration is obtained by the information of measured coefficients along with modeling of double-pass backward (DPB) superfluorescent fiber source (SFS).

再利用这些系数和复行后向超萤光光纤光源的拟，得到掺铒光纤的浓度。

The limit of technical policies for complex rhythmite reconstruction is developed by establishing typical model and using numerical modeling predicting method and optimal segmentation.

通过建立典型型，运用数值拟预测法和最优分割法，制定了复杂韵律层重组的技政策界限。

On basis of this model, the modeling methods and modeling flow were discussed based on data source of geological observation, drillhole, ichnography and section map.

在此基础上，探讨了在基于地质观测数据、钻孔数据、平面数据、剖面数据的断层建方法和建流程。

Starting with the basic equation of the hydraulic system this paper deals with the mechanism modeling for double triangle boom luffer and its hydraulic system.

从液压系统的基本方程入手，对双三角钻臂变幅机构进行了机理建。

With the request of geometry modeling system and application of the concept about complexes algebraictopology in the field of industrial production , the theory of non-manifold model come into being.

工业产品几何造型技的发展要求,以及代数拓扑学复形等概念引入到几何造型中,因此产生了非流形几何造型理论。

It deals with lots of factors from the process of networks modeling, node demand calculation, initial flow distribution, and the optimal design to the drawing of pipe networks and isopiestic line.

文章分三部分分别论述了管网的优化计算、管网形的绘制和等压线的绘制方法。

The parametric modeling method for loxodrome normal circular-arc spiral bevel gear was presented.

出了斜航式法向圆弧螺旋锥齿轮的参数化建方法。

In this thesis, a novel computational modeling approach to design constructible shapes is introduced.

其中阴影形法是目前重建人脸立体资料的方法中，较安全且较便宜的一个方法。

Design storm hyetograph is the essential element for hydrologic modeling analysis and storm water drainage design.

摘要设计暴雨雨对水文式分析与暴雨排水设计是不可或缺的基本要素。

Optimization and modeling of boric acid extraction from colemanite in water saturated with carbon dioxide and sulphur dioxide gases.

在二氧化碳及二氧化硫饱和水溶液中从硬硼钙石提取硼酸最优化方案的研究。

The conception model, assembly model and parts model of pneumatic hole impinger are established by the method of intelligent modeling.

采用智能产品建的方法,建立了气动潜孔冲击器的概念、装配和零件。

The current development of simulated, moving bed and fixed-bed modeling have given a new impetus to molasses desugarization by ion exclusion.

拟流动床及固定床的改进为离子排斥法提糖注入了活力。

The model of UML-BD is to hierarchize and modularize the UML model of discrete event system by using DEVS modeling technology.

是运用DEVS规范技术对离散事件系统的UML进行层次化、块化。

To reduce subjective factor in geostatistical modeling,non-parametrical geostatistics has become popular.This paper presents four kinds of variogram model for non-parametrical geostatistics.

为了减轻人为因素在创建中的作用,非参数的地质统计学得到发展,文章重点介绍了非参数地质统计学的4种变异函数。

Erbium ions concentration is obtained by the information of measured coefficients along with modeling of double-pass backward (DPB) superfluorescent fiber source (SFS).

再利用这些系数和复行后向超萤光光纤光源的拟，得到掺铒光纤的浓度。

The limit of technical policies for complex rhythmite reconstruction is developed by establishing typical model and using numerical modeling predicting method and optimal segmentation.

通过建立典，运用数值拟预测法和最优分割法，制定了复杂韵律层重组的技术政策界限。

On basis of this model, the modeling methods and modeling flow were discussed based on data source of geological observation, drillhole, ichnography and section map.

在此基础上，探讨了在基于地质观测数据、钻孔数据、平面图数据、剖面图数据的断层建方法和建流程。

Starting with the basic equation of the hydraulic system this paper deals with the mechanism modeling for double triangle boom luffer and its hydraulic system.

从液压系统的基本方程入手，对双三角钻臂变幅机构进行了机理建。

With the request of geometry modeling system and application of the concept about complexes algebraictopology in the field of industrial production , the theory of non-manifold model come into being.

工业产品几技术的发展要求,以及代数拓扑学复形等概念引入到几中,因此产生了非流形几理论。

It deals with lots of factors from the process of networks modeling, node demand calculation, initial flow distribution, and the optimal design to the drawing of pipe networks and isopiestic line.

文章分三部分分别论述了管网的优化计算、管网图形的绘制和等压线图的绘制方法。

The parametric modeling method for loxodrome normal circular-arc spiral bevel gear was presented.

给出了斜航式法向圆弧螺旋锥齿轮的参化建方法。

In this thesis, a novel computational modeling approach to design constructible shapes is introduced.

其造形法是目前重建人脸立体资料的方法，较安全且较便宜的一个方法。

Design storm hyetograph is the essential element for hydrologic modeling analysis and storm water drainage design.

摘要设计暴雨雨型对水文式分析与暴雨排水设计是不可或缺的基本要素。

Optimization and modeling of boric acid extraction from colemanite in water saturated with carbon dioxide and sulphur dioxide gases.

在二氧化碳及二氧化硫饱和水溶液从硬硼钙石提取硼酸最优化方案的研究。

The conception model, assembly model and parts model of pneumatic hole impinger are established by the method of intelligent modeling.

采用智能产品建的方法,建立了气动潜孔冲击器的概念型、装配型和零件型。

The current development of simulated, moving bed and fixed-bed modeling have given a new impetus to molasses desugarization by ion exclusion.

拟流动床及固定床的改进为离子排斥法提糖注入了活力。

The model of UML-BD is to hierarchize and modularize the UML model of discrete event system by using DEVS modeling technology.

型是运用DEVS规范技术对离散事件系统的UML型进行层次化、块化。

To reduce subjective factor in geostatistical modeling,non-parametrical geostatistics has become popular.This paper presents four kinds of variogram model for non-parametrical geostatistics.

为了减轻人为因素在创建型的作用,非参的地质统计学得到发展,文章重点介绍了非参地质统计学的4种变异函型。

Erbium ions concentration is obtained by the information of measured coefficients along with modeling of double-pass backward (DPB) superfluorescent fiber source (SFS).

再利用这些系和复行后向超萤光光纤光源的拟，得到掺铒光纤的浓度。

The limit of technical policies for complex rhythmite reconstruction is developed by establishing typical model and using numerical modeling predicting method and optimal segmentation.

通过建立典型型，运用拟预测法和最优分割法，制定了复杂韵律层重组的技术政策界限。

On basis of this model, the modeling methods and modeling flow were discussed based on data source of geological observation, drillhole, ichnography and section map.

在此基础上，探讨了在基于地质观测据、钻孔据、平面图据、剖面图据的断层建方法和建流程。

Starting with the basic equation of the hydraulic system this paper deals with the mechanism modeling for double triangle boom luffer and its hydraulic system.

从液压系统的基本方程入手，对双三角钻臂变幅机构进行了机理建。

With the request of geometry modeling system and application of the concept about complexes algebraictopology in the field of industrial production , the theory of non-manifold model come into being.

工业产品几何造型技术的发展要求,以及代拓扑学复形等概念引入到几何造型,因此产生了非流形几何造型理论。

It deals with lots of factors from the process of networks modeling, node demand calculation, initial flow distribution, and the optimal design to the drawing of pipe networks and isopiestic line.

文章分三部分分别论述了管网的优化计算、管网图形的绘制和等压线图的绘制方法。

The parametric modeling method for loxodrome normal circular-arc spiral bevel gear was presented.

给出了斜航式法向圆弧螺旋锥齿轮的参数化建方法。

In this thesis, a novel computational modeling approach to design constructible shapes is introduced.

其中阴影造形法是目前重建人脸立体资料的方法中，较安全且较便宜的一个方法。

Design storm hyetograph is the essential element for hydrologic modeling analysis and storm water drainage design.

摘要设型对水文式分析与排水设是不可或缺的基本要素。

Optimization and modeling of boric acid extraction from colemanite in water saturated with carbon dioxide and sulphur dioxide gases.

在二氧化碳及二氧化硫饱和水溶液中从硬硼钙石提取硼酸最优化方案的研究。

The conception model, assembly model and parts model of pneumatic hole impinger are established by the method of intelligent modeling.

采用智能产品建的方法,建立了气动潜孔冲击器的概念型、装配型和零件型。

The current development of simulated, moving bed and fixed-bed modeling have given a new impetus to molasses desugarization by ion exclusion.

拟流动床及固定床的改进为离子排斥法提糖注入了活力。

The model of UML-BD is to hierarchize and modularize the UML model of discrete event system by using DEVS modeling technology.

型是运用DEVS规范技术对离散事件系统的UML型进行层次化、块化。

To reduce subjective factor in geostatistical modeling,non-parametrical geostatistics has become popular.This paper presents four kinds of variogram model for non-parametrical geostatistics.

为了减轻人为因素在创建型中的作用,非参数的地质统学得到发展,文章重点介绍了非参数地质统学的4种变异函数型。

Erbium ions concentration is obtained by the information of measured coefficients along with modeling of double-pass backward (DPB) superfluorescent fiber source (SFS).

再利用这些系数和复行后向超萤光光纤光源的拟，得到掺铒光纤的浓度。

The limit of technical policies for complex rhythmite reconstruction is developed by establishing typical model and using numerical modeling predicting method and optimal segmentation.

通过建立典型型，运用数值拟预测法和最优分割法，制定了复杂韵律层重组的技术政策界限。

On basis of this model, the modeling methods and modeling flow were discussed based on data source of geological observation, drillhole, ichnography and section map.

在此基础上，探讨了在基于地质观测数据、钻孔数据、平面图数据、剖面图数据的断层建方法和建流程。

Starting with the basic equation of the hydraulic system this paper deals with the mechanism modeling for double triangle boom luffer and its hydraulic system.

从液压系统的基本方程入手，对双三角钻臂变幅机构进行了机理建。

With the request of geometry modeling system and application of the concept about complexes algebraictopology in the field of industrial production , the theory of non-manifold model come into being.

工业产品几何造型技术的发展要求,以及代数拓扑学复形等概念引入到几何造型中,因此产生了非流形几何造型理论。

It deals with lots of factors from the process of networks modeling, node demand calculation, initial flow distribution, and the optimal design to the drawing of pipe networks and isopiestic line.

文章分三部分分别论述了管网的优化算、管网图形的绘制和等压线图的绘制方法。

The parametric modeling method for loxodrome normal circular-arc spiral bevel gear was presented.

给出了斜航式法向圆弧螺旋锥齿轮的参数方法。

In this thesis, a novel computational modeling approach to design constructible shapes is introduced.

其中阴影造形法是目前重人脸立体资料的方法中，较安全且较便宜的一个方法。

Design storm hyetograph is the essential element for hydrologic modeling analysis and storm water drainage design.

摘要设计暴雨雨型对水文式分析与暴雨排水设计是不可或缺的基本要素。

Optimization and modeling of boric acid extraction from colemanite in water saturated with carbon dioxide and sulphur dioxide gases.

在二氧碳及二氧硫饱和水溶液中从硬硼钙石提取硼酸最优方案的研究。

The conception model, assembly model and parts model of pneumatic hole impinger are established by the method of intelligent modeling.

采用智能产品的方法,立了气动潜孔冲击器的概念型、装配型和零件型。

The current development of simulated, moving bed and fixed-bed modeling have given a new impetus to molasses desugarization by ion exclusion.

流动床及固定床的改进为离子排斥法提糖注入了活力。

The model of UML-BD is to hierarchize and modularize the UML model of discrete event system by using DEVS modeling technology.

型是运用DEVS规范技术对离散事件系统的UML型进行层次、块。

To reduce subjective factor in geostatistical modeling,non-parametrical geostatistics has become popular.This paper presents four kinds of variogram model for non-parametrical geostatistics.

为了减轻人为因素在创型中的作用,非参数的地质统计学得到发展,文章重点介绍了非参数地质统计学的4种变异函数型。

Erbium ions concentration is obtained by the information of measured coefficients along with modeling of double-pass backward (DPB) superfluorescent fiber source (SFS).

再利用这些系数和复行后向超萤光光纤光源的，得到掺铒光纤的浓度。

The limit of technical policies for complex rhythmite reconstruction is developed by establishing typical model and using numerical modeling predicting method and optimal segmentation.

通过立典型型，运用数值预测法和最优分割法，制定了复杂韵律层重组的技术政策界限。

On basis of this model, the modeling methods and modeling flow were discussed based on data source of geological observation, drillhole, ichnography and section map.

在此基础上，探讨了在基于地质观测数据、钻孔数据、平面图数据、剖面图数据的断层方法和流程。

Starting with the basic equation of the hydraulic system this paper deals with the mechanism modeling for double triangle boom luffer and its hydraulic system.

从液压系统的基本方程入手，对双三角钻臂变幅构进行了理。

With the request of geometry modeling system and application of the concept about complexes algebraictopology in the field of industrial production , the theory of non-manifold model come into being.

工业产品几何造型技术的发展要求,以及代数拓扑学复形等概念引入到几何造型中,因此产生了非流形几何造型理论。

It deals with lots of factors from the process of networks modeling, node demand calculation, initial flow distribution, and the optimal design to the drawing of pipe networks and isopiestic line.

文章分三部分分别论述了管网的优计算、管网图形的绘制和等压线图的绘制方法。

The parametric modeling method for loxodrome normal circular-arc spiral bevel gear was presented.

给出了斜航式法向圆弧螺旋锥齿轮参数建方法。

In this thesis, a novel computational modeling approach to design constructible shapes is introduced.

其中阴影造形法是目前重建人脸立体资料方法中，较安全且较便个方法。

Design storm hyetograph is the essential element for hydrologic modeling analysis and storm water drainage design.

摘要设计暴雨雨型对水文式分析与暴雨排水设计是不可或缺基本要素。

Optimization and modeling of boric acid extraction from colemanite in water saturated with carbon dioxide and sulphur dioxide gases.

在二氧碳及二氧硫饱和水溶液中从硬硼钙石提取硼酸优方案研究。

The conception model, assembly model and parts model of pneumatic hole impinger are established by the method of intelligent modeling.

采用智能产品建方法,建立了气动潜孔冲击器概念型、装配型和零件型。

The current development of simulated, moving bed and fixed-bed modeling have given a new impetus to molasses desugarization by ion exclusion.

拟流动床及固定床改进为离子排斥法提糖注入了活力。

The model of UML-BD is to hierarchize and modularize the UML model of discrete event system by using DEVS modeling technology.

型是运用DEVS规范技术对离散事件系统UML型进行层次、块。

To reduce subjective factor in geostatistical modeling,non-parametrical geostatistics has become popular.This paper presents four kinds of variogram model for non-parametrical geostatistics.

为了减轻人为因素在创建型中作用,非参数地质统计学得到发展,文章重点介绍了非参数地质统计学4种变异函数型。

Erbium ions concentration is obtained by the information of measured coefficients along with modeling of double-pass backward (DPB) superfluorescent fiber source (SFS).

再利用这些系数和复行后向超萤光光纤光源拟，得到掺铒光纤浓度。

The limit of technical policies for complex rhythmite reconstruction is developed by establishing typical model and using numerical modeling predicting method and optimal segmentation.

通过建立典型型，运用数值拟预测法和优分割法，制定了复杂韵律层重组技术政策界限。

On basis of this model, the modeling methods and modeling flow were discussed based on data source of geological observation, drillhole, ichnography and section map.

在此基础上，探讨了在基于地质观测数据、钻孔数据、平面图数据、剖面图数据断层建方法和建流程。

Starting with the basic equation of the hydraulic system this paper deals with the mechanism modeling for double triangle boom luffer and its hydraulic system.

从液压系统基本方程入手，对双三角钻臂变幅机构进行了机理建。

With the request of geometry modeling system and application of the concept about complexes algebraictopology in the field of industrial production , the theory of non-manifold model come into being.

工业产品几何造型技术发展要求,以及代数拓扑学复形等概念引入到几何造型中,因此产生了非流形几何造型理论。

It deals with lots of factors from the process of networks modeling, node demand calculation, initial flow distribution, and the optimal design to the drawing of pipe networks and isopiestic line.

文章分三部分分别论述了管网优计算、管网图形绘制和等压线图绘制方法。