Plymesh aeration pads are used to fluidize and to optimize the flow rate of powdered and pulverized products in silos and in bunkers.

使用复合网通风垫后，地上式青贮槽中粉末实现体化，到最佳化。

Methods Occlusion of the openings of main artery and side artery was performed through double-channeled air pocket tube,with normothermia,normal flowing rate and heart beating.

方法采用经肺动双腔气囊导管封堵主动侧动导管开口，常温、常规量，心脏不停跳缝闭动导管开口。

With three engineering examples, analyses the underheated problem because of deficiency of the pressure head and flow rate, and presents an effective solution to the problem.

摘要结合三个实例分析了供热管网末端用户因压头和量不足而导致不热问题，提出了切实解决方法。

While conducting hydraulic fracturing, the flow rate is required to be controlled to enable the hall-off to block off and uncord the eyelet based on the stimulation process.

封堵球分层压裂时，为了使暂堵球按照施工泵注程序对射孔孔眼进封堵和解封，需要对压裂施工泵注排量提出要求。

The maximum fuel flow rate of single nozzle of vehicle refueller is a very important parameter.To control this parameter exactly is valuable relatively for designing a new refueller successfully.

地面加油车单管最大加油量是一个非常重要参数，准确把握这个参数，对于整车合理设计大有意义。

Plymesh aeration pads are used to fluidize and to optimize the flow rate of powdered and pulverized products in silos and in bunkers.

使用复合网通风垫后，地上式青贮槽中的粉末现流体化，流速佳化。

Methods Occlusion of the openings of main artery and side artery was performed through double-channeled air pocket tube,with normothermia,normal flowing rate and heart beating.

方法采用经肺动双腔气囊导管封堵主动侧动导管开口，常温、常规流量，心脏不停跳缝闭动导管开口。

With three engineering examples, analyses the underheated problem because of deficiency of the pressure head and flow rate, and presents an effective solution to the problem.

摘要结合三个例分析了供热管网末端用户因压头和流量不足而导致的不热问题，提出了行的解决方法。

While conducting hydraulic fracturing, the flow rate is required to be controlled to enable the hall-off to block off and uncord the eyelet based on the stimulation process.

封堵球分层压裂时，为了使暂堵球按照施工泵注程序对射孔孔眼进行封堵和解封，需要对压裂施工的泵注排量提出要求。

The maximum fuel flow rate of single nozzle of vehicle refueller is a very important parameter.To control this parameter exactly is valuable relatively for designing a new refueller successfully.

地面加油车的单管大加油流量是一个非常重要的参数，准确把握这个参数，对于整车的合理设计大有意义。

Plymesh aeration pads are used to fluidize and to optimize the flow rate of powdered and pulverized products in silos and in bunkers.

使用复合网通风垫后，地上式青贮槽中的粉末可体化，速达到最佳化。

Methods Occlusion of the openings of main artery and side artery was performed through double-channeled air pocket tube,with normothermia,normal flowing rate and heart beating.

法采用经肺动双腔气囊导管堵主动侧动导管开口，常温、常规量，心脏不停跳缝闭动导管开口。

With three engineering examples, analyses the underheated problem because of deficiency of the pressure head and flow rate, and presents an effective solution to the problem.

摘要结合三个例分析了供热管网末端用户因压头和量不足而导致的不热问题，提出了切可行的解决法。

While conducting hydraulic fracturing, the flow rate is required to be controlled to enable the hall-off to block off and uncord the eyelet based on the stimulation process.

堵球分层压裂时，为了使暂堵球按照施工泵注程序对射孔孔眼进行堵和解，需要对压裂施工的泵注排量提出要求。

The maximum fuel flow rate of single nozzle of vehicle refueller is a very important parameter.To control this parameter exactly is valuable relatively for designing a new refueller successfully.

地面加油车的单管最大加油量是一个非常重要的参数，准确把握这个参数，对于整车的合理设计大有意义。

Plymesh aeration pads are used to fluidize and to optimize the flow rate of powdered and pulverized products in silos and in bunkers.

使用复合网通风垫后，地上式青贮槽中的粉末可实现体化，速达到最佳化。

Methods Occlusion of the openings of main artery and side artery was performed through double-channeled air pocket tube,with normothermia,normal flowing rate and heart beating.

方法采用经肺动双腔管封堵主动侧动管开口，常温、常规，心脏停跳缝闭动管开口。

With three engineering examples, analyses the underheated problem because of deficiency of the pressure head and flow rate, and presents an effective solution to the problem.

摘要结合三个实例分析了供热管网末端用户因压头和足而致的热问题，提出了切实可行的解决方法。

While conducting hydraulic fracturing, the flow rate is required to be controlled to enable the hall-off to block off and uncord the eyelet based on the stimulation process.

封堵球分层压裂时，为了使暂堵球按照施工泵注程序对射孔孔眼进行封堵和解封，需要对压裂施工的泵注排提出要求。

The maximum fuel flow rate of single nozzle of vehicle refueller is a very important parameter.To control this parameter exactly is valuable relatively for designing a new refueller successfully.

地面加油车的单管最大加油是一个非常重要的参数，准确把握这个参数，对于整车的合理设计大有意义。

Plymesh aeration pads are used to fluidize and to optimize the flow rate of powdered and pulverized products in silos and in bunkers.

使用复合网通风垫后，地上式青贮槽中的粉末可现体化，速达到最佳化。

Methods Occlusion of the openings of main artery and side artery was performed through double-channeled air pocket tube,with normothermia,normal flowing rate and heart beating.

方法采用经肺动双腔气囊导管封堵主动侧动导管开口，常温、常，心脏不停跳缝闭动导管开口。

With three engineering examples, analyses the underheated problem because of deficiency of the pressure head and flow rate, and presents an effective solution to the problem.

摘要结合例分析了供热管网末端用户因压头和不足而导致的不热问题，提出了切可行的解决方法。

While conducting hydraulic fracturing, the flow rate is required to be controlled to enable the hall-off to block off and uncord the eyelet based on the stimulation process.

封堵球分层压裂时，为了使暂堵球按照施工泵注程序对射孔孔眼进行封堵和解封，需要对压裂施工的泵注排提出要求。

The maximum fuel flow rate of single nozzle of vehicle refueller is a very important parameter.To control this parameter exactly is valuable relatively for designing a new refueller successfully.

地面加油车的单管最大加油是一非常重要的参数，准确把握这参数，对于整车的合理设计大有意义。

Plymesh aeration pads are used to fluidize and to optimize the flow rate of powdered and pulverized products in silos and in bunkers.

使用复合网通风垫后，地上式青贮槽中的粉末可实现体化，速达到最佳化。

Methods Occlusion of the openings of main artery and side artery was performed through double-channeled air pocket tube,with normothermia,normal flowing rate and heart beating.

方法采用经肺动双腔气囊堵主动侧动开口，常温、常规量，心脏不停跳缝闭动开口。

With three engineering examples, analyses the underheated problem because of deficiency of the pressure head and flow rate, and presents an effective solution to the problem.

摘要结合三个实例分析了供热网末端用户因压量不足而致的不热问题，提出了切实可行的解决方法。

While conducting hydraulic fracturing, the flow rate is required to be controlled to enable the hall-off to block off and uncord the eyelet based on the stimulation process.

堵球分层压裂时，为了使暂堵球按照施工泵注程序对射孔孔眼进行堵解，需要对压裂施工的泵注排量提出要求。

The maximum fuel flow rate of single nozzle of vehicle refueller is a very important parameter.To control this parameter exactly is valuable relatively for designing a new refueller successfully.

地面加油车的单最大加油量是一个非常重要的参数，准确把握这个参数，对于整车的合理设计大有意义。

Plymesh aeration pads are used to fluidize and to optimize the flow rate of powdered and pulverized products in silos and in bunkers.

用复合网通风垫后，地上式青贮槽中的粉末可实现流体化，流速达到最佳化。

Methods Occlusion of the openings of main artery and side artery was performed through double-channeled air pocket tube,with normothermia,normal flowing rate and heart beating.

方法采用经肺动双腔气囊导管封堵主动侧动导管开口，常温、常规流量，心脏不停跳缝闭动导管开口。

With three engineering examples, analyses the underheated problem because of deficiency of the pressure head and flow rate, and presents an effective solution to the problem.

摘要结合三个实例分析了供热管网末端用户因压头和流量不足而导致的不热问题，提出了切实可行的解决方法。

While conducting hydraulic fracturing, the flow rate is required to be controlled to enable the hall-off to block off and uncord the eyelet based on the stimulation process.

封堵球分层压裂时，为了暂堵球按照施工泵注射孔孔眼进行封堵和解封，需要压裂施工的泵注排量提出要求。

The maximum fuel flow rate of single nozzle of vehicle refueller is a very important parameter.To control this parameter exactly is valuable relatively for designing a new refueller successfully.

地面加油车的单管最大加油流量是一个非常重要的参数，准确把握这个参数，于整车的合理设计大有意义。

Plymesh aeration pads are used to fluidize and to optimize the flow rate of powdered and pulverized products in silos and in bunkers.

使用复合网通风垫后，地上式青贮槽中的粉末可实现流体化，流速达到最佳化。

Methods Occlusion of the openings of main artery and side artery was performed through double-channeled air pocket tube,with normothermia,normal flowing rate and heart beating.

方法采用经肺动双导管封堵主动侧动导管开口，常温、常规流，心脏停跳缝闭动导管开口。

With three engineering examples, analyses the underheated problem because of deficiency of the pressure head and flow rate, and presents an effective solution to the problem.

摘要结合三个实例分析了供热管网末端用户因压头和流而导致的热问题，提出了切实可行的解决方法。

While conducting hydraulic fracturing, the flow rate is required to be controlled to enable the hall-off to block off and uncord the eyelet based on the stimulation process.

封堵球分层压裂时，为了使暂堵球按照施工泵注程序对射孔孔眼进行封堵和解封，需要对压裂施工的泵注排提出要求。

The maximum fuel flow rate of single nozzle of vehicle refueller is a very important parameter.To control this parameter exactly is valuable relatively for designing a new refueller successfully.

地面加油车的单管最大加油流是一个非常重要的参数，准确把握这个参数，对于整车的合理设计大有意义。

Plymesh aeration pads are used to fluidize and to optimize the flow rate of powdered and pulverized products in silos and in bunkers.

使用复网通风垫后，地上式青贮槽中的粉末可实现体化，速达到最佳化。

Methods Occlusion of the openings of main artery and side artery was performed through double-channeled air pocket tube,with normothermia,normal flowing rate and heart beating.

方法采用经肺动双腔气囊导管封堵主动侧动导管开口，常温、常规，脏不停跳缝闭动导管开口。

With three engineering examples, analyses the underheated problem because of deficiency of the pressure head and flow rate, and presents an effective solution to the problem.

摘要结实例分析了供热管网末端用户因压头和不足而导致的不热问题，提出了切实可行的解决方法。

While conducting hydraulic fracturing, the flow rate is required to be controlled to enable the hall-off to block off and uncord the eyelet based on the stimulation process.

封堵球分层压裂时，为了使暂堵球按照施工泵注程序对射孔孔眼进行封堵和解封，需要对压裂施工的泵注排提出要求。

The maximum fuel flow rate of single nozzle of vehicle refueller is a very important parameter.To control this parameter exactly is valuable relatively for designing a new refueller successfully.

地面加油车的单管最大加油是一非常重要的参数，准确把握这参数，对于整车的理设计大有意义。