The characteristic and influencing factors of tools wear were analyzed through turning fluorophlogopite machinable ceramics.

对氟云母可加工陶进行车加工试验,分析了切中刀具磨损特性,讨论了影响刀具磨损率因素。

Some ceramic works of art are shown in this exhibition.

这次展览会上展出了一些陶艺术品。

The ceramic plates of air valves against abration, corrosion, dust, dirt, and sand.

陶阀板耐磨、耐腐蚀、耐固体颗粒侵蚀，寿命长，适合各种气体、液体阀门密封。

After all my care in packing it, many of the ceramics arrived broken.

尽管我包得非常小心,器运到时还是坏了许多。

A separate inlet with a ceramic frit is used to aerate the perfusate.

用玻璃料成一个独立进口暴露在灌流液中。

The surface glossiness of ceramic ware after glazing, especially the metallic sheen of lusterware.

通过往釉面上添加氧化物而产生光泽黏土品。

The high-speed steel tool was not suitable for turning fluorophlogopite,and ceramics tool was ...

车氟云母陶对刀具磨损过程与切相似。

The worn surface morphology of ADZ ceramic was analyzed with a scanning electron microscope.

与去离子水相比,在小牛血清润滑条件下ADZ陶摩擦因数和磨损率降低。

The features and applications in superprecision turnings of piezoelectric ceramic inching motion devices are introduced.

介绍了压电陶微动机构性能特点及在超精密车加工中多种用途。

Those ceramics are beautiful.

那些陶器很好看。

Porous ceramic materials on the base of strontium zirconate were developed with zirconium dioxide,baddeleyite powder,and granular polysterol.

采用二氧化锆、斜锆矿粉、碳酸锶及粒状聚苯乙烯成了锆酸锶多孔陶材料。

Lead is also used in some seramic (ceramic) and vinol (vinyl) products, candles, hair colorings and other goods.

铅也可能被用于陶器，乙烯基产品，蜡烛，染发剂和其他产品。

The effect of process parameters on the electric insulance of micro arc oxidated ceramic coat on aluminium plate is studied.

研究了工艺参数对铝微弧氧化陶层电绝缘性能影响规律。

In this paper .bridge-indentation method is adopted to precrack in ceramic specimens, and the advantage as well as disadvantage are discussed.

本文首先对桥压法预原生裂纹进行了研究,然后针对桥压法存在问题提出了一种简便而有效陶材料原生裂纹预方法——静态膨胀法。

Writer discusses also the characteristic of silicon nitrid ceramic materials,and chooses this ceramic bearing used in the bottom of the reactor above.

论述了氮化硅陶材料特点，选择了氮化硅陶轴承作为有机硅室温胶搅拌釜底轴承并进行了相应设计。

In this process,microwave heating is used to make ceramic materials plastifying under a high temperature,so that a good machinability can be achieved.

该方法利用微波加热使陶材料在较高温度下塑性化,从而获得到较好加工性。

To raise ozone output of ozonator,it demands that ceramic plate materials for ozonator have good dielectric properties and quite high thermal conductivity.

为了提高臭氧发生器臭氧产量,要求臭氧发生器用陶基板材料具有较高介电性能和热导率。

It is extensively practical and profession used in deaerate of raw materials, such as plastics, handicraft product, chemical engineering and porcelain and ceramics...etc.

该机广泛适用于塑胶、工艺品、化工、陶等原料需脱泡(真空)各个行业.

The extract of Sophora japonica L. was processed by inorganic ceramic membrane, and the whole solid, effective ingredinent and flux of mebrane were examined.

用孔径为0.2μm无机陶膜对槐米提取液进行微滤,对提取液微滤前后在总固体、性状、指标性成分、膜通量等方面变化进行对比分析。

It has been studied that concentrated raw ceramics single -material-china stone ultrafines is mixed and homogenized by technology of computerized process control in this paper.

本文对经精选陶单一原料—石,采用以计算机监控掺和与均化技术,进行试验研究进行了论述。

The characteristic and influencing factors of tools wear were analyzed through turning fluorophlogopite machinable ceramics.

对氟云母可加工陶进行车削加工试验,分析了切削中的刀具磨损特性,讨论了影响刀具磨损率的因素。

Some ceramic works of art are shown in this exhibition.

这次展览会上展出了一些陶艺术品。

The ceramic plates of air valves against abration, corrosion, dust, dirt, and sand.

陶阀板耐磨、耐腐蚀、耐固体颗粒侵蚀，寿命长，适合各种气体、液体阀门的密封。

After all my care in packing it, many of the ceramics arrived broken.

尽管我包得非常小心,运到时还是坏了许多。

A separate inlet with a ceramic frit is used to aerate the perfusate.

用玻璃料制成的一个独立进口暴露在灌流液中。

The surface glossiness of ceramic ware after glazing, especially the metallic sheen of lusterware.

通过往釉面上添加属氧化物属光泽的黏土制品。

The high-speed steel tool was not suitable for turning fluorophlogopite,and ceramics tool was ...

车削氟云母陶对刀具磨损过程与切削属相似。

The worn surface morphology of ADZ ceramic was analyzed with a scanning electron microscope.

与去离子水相比,在小牛血清润滑条件下ADZ陶的摩擦因数和磨损率降低。

The features and applications in superprecision turnings of piezoelectric ceramic inching motion devices are introduced.

介绍了压电陶微动机构的性能特点及在超精密车削加工中的多种用途。

Those ceramics are beautiful.

那些陶很好看。

Porous ceramic materials on the base of strontium zirconate were developed with zirconium dioxide,baddeleyite powder,and granular polysterol.

采用二氧化锆、斜锆矿粉、碳酸锶及粒状聚苯乙烯制成了锆酸锶多孔陶材料。

Lead is also used in some seramic (ceramic) and vinol (vinyl) products, candles, hair colorings and other goods.

铅也可能被用于陶，乙烯基品，蜡烛，染发剂和其他品。

The effect of process parameters on the electric insulance of micro arc oxidated ceramic coat on aluminium plate is studied.

研究了工艺参数对铝微弧氧化陶层电绝缘性能的影响规律。

In this paper .bridge-indentation method is adopted to precrack in ceramic specimens, and the advantage as well as disadvantage are discussed.

本文首先对桥压法预制原裂纹进行了研究,然后针对桥压法存在的问题提出了一种简便有效的陶材料原裂纹的预制方法——静态膨胀法。

Writer discusses also the characteristic of silicon nitrid ceramic materials,and chooses this ceramic bearing used in the bottom of the reactor above.

论述了氮化硅陶材料的特点，选择了氮化硅陶轴承作为有机硅室温胶搅拌釜底轴承并进行了相应设计。

In this process,microwave heating is used to make ceramic materials plastifying under a high temperature,so that a good machinability can be achieved.

该方法利用微波加热使陶材料在较高温度下塑性化,从获得到较好的加工性。

To raise ozone output of ozonator,it demands that ceramic plate materials for ozonator have good dielectric properties and quite high thermal conductivity.

为了提高臭氧发的臭氧量,要求臭氧发用的陶基板材料具有较高的介电性能和热导率。

It is extensively practical and profession used in deaerate of raw materials, such as plastics, handicraft product, chemical engineering and porcelain and ceramics...etc.

该机广泛适用于塑胶、工艺品、化工、陶等原料需脱泡(真空)的各个行业.

The extract of Sophora japonica L. was processed by inorganic ceramic membrane, and the whole solid, effective ingredinent and flux of mebrane were examined.

用孔径为0.2μm的无机陶膜对槐米提取液进行微滤,对提取液微滤前后在总固体、性状、指标性成分、膜通量等方面的变化进行对比分析。

It has been studied that concentrated raw ceramics single -material-china stone ultrafines is mixed and homogenized by technology of computerized process control in this paper.

本文对经精选的陶单一原料—石,采用以计算机监控的掺和与均化技术,进行的试验研究进行了论述。

The characteristic and influencing factors of tools wear were analyzed through turning fluorophlogopite machinable ceramics.

对氟云母可加工陶瓷进行车削加工试验,分析了切削中的刀具磨损特性,讨论了影响刀具磨损率的因素。

Some ceramic works of art are shown in this exhibition.

这次展览会上展出了一些陶瓷艺术品。

The ceramic plates of air valves against abration, corrosion, dust, dirt, and sand.

陶瓷阀板耐磨、耐腐蚀、耐固体颗粒侵蚀，寿命长，适合各种气体、液体阀门的密封。

After all my care in packing it, many of the ceramics arrived broken.

尽管我包得非常小心,瓷器运到时还是坏了许。

A separate inlet with a ceramic frit is used to aerate the perfusate.

璃料制成的一个独立进口暴露在灌流液中。

The surface glossiness of ceramic ware after glazing, especially the metallic sheen of lusterware.

通过往面上添加属氧化物而产生属光泽的黏土制品。

The high-speed steel tool was not suitable for turning fluorophlogopite,and ceramics tool was ...

车削氟云母陶瓷对刀具磨损过程与切削属相似。

The worn surface morphology of ADZ ceramic was analyzed with a scanning electron microscope.

与去离子水相比,在小牛血清润滑条件下ADZ陶瓷的摩擦因数和磨损率降低。

The features and applications in superprecision turnings of piezoelectric ceramic inching motion devices are introduced.

介绍了压电陶瓷微动机构的性能特点及在超精密车削加工中的种途。

Those ceramics are beautiful.

那些陶器很好看。

Porous ceramic materials on the base of strontium zirconate were developed with zirconium dioxide,baddeleyite powder,and granular polysterol.

采二氧化锆、斜锆矿粉、碳酸锶及粒状聚苯乙烯制成了锆酸锶孔陶瓷材料。

Lead is also used in some seramic (ceramic) and vinol (vinyl) products, candles, hair colorings and other goods.

铅也可能被于陶器，乙烯基产品，蜡烛，染发剂和其他产品。

The effect of process parameters on the electric insulance of micro arc oxidated ceramic coat on aluminium plate is studied.

研究了工艺参数对铝微弧氧化陶瓷层电绝缘性能的影响规律。

In this paper .bridge-indentation method is adopted to precrack in ceramic specimens, and the advantage as well as disadvantage are discussed.

本文首先对桥压法预制原生裂纹进行了研究,然后针对桥压法存在的问题提出了一种简便而有效的陶瓷材料原生裂纹的预制方法——静态膨胀法。

Writer discusses also the characteristic of silicon nitrid ceramic materials,and chooses this ceramic bearing used in the bottom of the reactor above.

论述了氮化硅陶瓷材料的特点，选择了氮化硅陶瓷轴承作为有机硅室温胶搅拌釜底轴承并进行了相应设计。

In this process,microwave heating is used to make ceramic materials plastifying under a high temperature,so that a good machinability can be achieved.

该方法利微波加热使陶瓷材料在较高温度下塑性化,从而获得到较好的加工性。

To raise ozone output of ozonator,it demands that ceramic plate materials for ozonator have good dielectric properties and quite high thermal conductivity.

为了提高臭氧发生器的臭氧产量,要求臭氧发生器的陶瓷基板材料具有较高的介电性能和热导率。

It is extensively practical and profession used in deaerate of raw materials, such as plastics, handicraft product, chemical engineering and porcelain and ceramics...etc.

该机广泛适于塑胶、工艺品、化工、陶瓷等原料需脱泡(真空)的各个行业.

The extract of Sophora japonica L. was processed by inorganic ceramic membrane, and the whole solid, effective ingredinent and flux of mebrane were examined.

孔径为0.2μm的无机陶瓷膜对槐米提取液进行微滤,对提取液微滤前后在总固体、性状、指标性成分、膜通量等方面的变化进行对比分析。

It has been studied that concentrated raw ceramics single -material-china stone ultrafines is mixed and homogenized by technology of computerized process control in this paper.

本文对经精选的陶瓷单一原料—瓷石,采以计算机监控的掺和与均化技术,进行的试验研究进行了论述。

The characteristic and influencing factors of tools wear were analyzed through turning fluorophlogopite machinable ceramics.

对氟云母可加工陶进行车削加工试验,分析切削中的刀具磨损特性,讨论影响刀具磨损率的因素。

Some ceramic works of art are shown in this exhibition.

这次览会上一些陶艺术品。

The ceramic plates of air valves against abration, corrosion, dust, dirt, and sand.

陶阀板耐磨、耐腐蚀、耐固体颗粒侵蚀，寿命长，适合各种气体、液体阀门的密封。

After all my care in packing it, many of the ceramics arrived broken.

尽管我包得非常小心,器运到时还是坏许多。

A separate inlet with a ceramic frit is used to aerate the perfusate.

用玻璃料制成的一个独立进口暴露在灌流液中。

The surface glossiness of ceramic ware after glazing, especially the metallic sheen of lusterware.

通过往釉面上添加属氧化物而产生属光泽的黏土制品。

The high-speed steel tool was not suitable for turning fluorophlogopite,and ceramics tool was ...

车削氟云母陶对刀具磨损过程与切削属相似。

The worn surface morphology of ADZ ceramic was analyzed with a scanning electron microscope.

与去离子水相比,在小牛血清润滑条件下ADZ陶的摩擦因数和磨损率降低。

The features and applications in superprecision turnings of piezoelectric ceramic inching motion devices are introduced.

介绍压电陶微动机构的性能特点及在超精密车削加工中的多种用途。

Those ceramics are beautiful.

那些陶器很好看。

Porous ceramic materials on the base of strontium zirconate were developed with zirconium dioxide,baddeleyite powder,and granular polysterol.

采用二氧化锆、斜锆矿粉、碳酸锶及粒状聚苯乙烯制成锆酸锶多孔陶材料。

Lead is also used in some seramic (ceramic) and vinol (vinyl) products, candles, hair colorings and other goods.

铅也可能被用于陶器，乙烯基产品，蜡烛，染发剂和其他产品。

The effect of process parameters on the electric insulance of micro arc oxidated ceramic coat on aluminium plate is studied.

研究工艺参数对铝微弧氧化陶层电绝缘性能的影响规律。

In this paper .bridge-indentation method is adopted to precrack in ceramic specimens, and the advantage as well as disadvantage are discussed.

本文首先对桥压法预制原生裂纹进行研究,然后针对桥压法存在的问题提一种简便而有效的陶材料原生裂纹的预制方法——静态膨胀法。

Writer discusses also the characteristic of silicon nitrid ceramic materials,and chooses this ceramic bearing used in the bottom of the reactor above.

论述氮化硅陶材料的特点，选择氮化硅陶轴承作为有机硅室温胶搅拌釜轴承并进行相应设计。

In this process,microwave heating is used to make ceramic materials plastifying under a high temperature,so that a good machinability can be achieved.

该方法利用微波加热使陶材料在较高温度下塑性化,从而获得到较好的加工性。

To raise ozone output of ozonator,it demands that ceramic plate materials for ozonator have good dielectric properties and quite high thermal conductivity.

为提高臭氧发生器的臭氧产量,要求臭氧发生器用的陶基板材料具有较高的介电性能和热导率。

It is extensively practical and profession used in deaerate of raw materials, such as plastics, handicraft product, chemical engineering and porcelain and ceramics...etc.

该机广泛适用于塑胶、工艺品、化工、陶等原料需脱泡(真空)的各个行业.

The extract of Sophora japonica L. was processed by inorganic ceramic membrane, and the whole solid, effective ingredinent and flux of mebrane were examined.

用孔径为0.2μm的无机陶膜对槐米提取液进行微滤,对提取液微滤前后在总固体、性状、指标性成分、膜通量等方面的变化进行对比分析。

It has been studied that concentrated raw ceramics single -material-china stone ultrafines is mixed and homogenized by technology of computerized process control in this paper.

本文对经精选的陶单一原料—石,采用以计算机监控的掺和与均化技术,进行的试验研究进行论述。

The characteristic and influencing factors of tools wear were analyzed through turning fluorophlogopite machinable ceramics.

对氟云母可加工进行车削加工试验,分析了切削中的刀具磨损特性,讨论了影响刀具磨损率的因素。

Some ceramic works of art are shown in this exhibition.

这次展览会上展出了一些艺术品。

The ceramic plates of air valves against abration, corrosion, dust, dirt, and sand.

阀板磨、、固体颗粒侵，寿命长，适合各种气体、液体阀门的密封。

After all my care in packing it, many of the ceramics arrived broken.

尽管我包得非常小心,器运到时还是坏了许多。

A separate inlet with a ceramic frit is used to aerate the perfusate.

用玻璃料制成的一个独立进口暴露在灌流液中。

The surface glossiness of ceramic ware after glazing, especially the metallic sheen of lusterware.

通过往釉面上添加属氧化物而产生属光泽的黏土制品。

The high-speed steel tool was not suitable for turning fluorophlogopite,and ceramics tool was ...

车削氟云母对刀具磨损过程与切削属相似。

The worn surface morphology of ADZ ceramic was analyzed with a scanning electron microscope.

与去离子水相比,在小牛血清润滑条件下ADZ的摩擦因数和磨损率降低。

The features and applications in superprecision turnings of piezoelectric ceramic inching motion devices are introduced.

介绍了压电微动机构的性能特点及在超精密车削加工中的多种用途。

Those ceramics are beautiful.

那些器很好看。

Porous ceramic materials on the base of strontium zirconate were developed with zirconium dioxide,baddeleyite powder,and granular polysterol.

采用二氧化锆、斜锆矿粉、碳酸锶及粒状聚苯乙烯制成了锆酸锶多孔材料。

Lead is also used in some seramic (ceramic) and vinol (vinyl) products, candles, hair colorings and other goods.

铅也可能被用于器，乙烯基产品，蜡烛，染发剂和其他产品。

The effect of process parameters on the electric insulance of micro arc oxidated ceramic coat on aluminium plate is studied.

研究了工艺参数对铝微弧氧化层电绝缘性能的影响规律。

In this paper .bridge-indentation method is adopted to precrack in ceramic specimens, and the advantage as well as disadvantage are discussed.

本文首先对桥压法预制原生裂纹进行了研究,然后针对桥压法存在的问题提出了一种简便而有效的材料原生裂纹的预制方法——静态膨胀法。

Writer discusses also the characteristic of silicon nitrid ceramic materials,and chooses this ceramic bearing used in the bottom of the reactor above.

论述了氮化硅材料的特点，选择了氮化硅轴承作为有机硅室温胶搅拌釜底轴承并进行了相应设计。

In this process,microwave heating is used to make ceramic materials plastifying under a high temperature,so that a good machinability can be achieved.

该方法利用微波加热使材料在较高温度下塑性化,从而获得到较好的加工性。

To raise ozone output of ozonator,it demands that ceramic plate materials for ozonator have good dielectric properties and quite high thermal conductivity.

为了提高臭氧发生器的臭氧产量,要求臭氧发生器用的基板材料具有较高的介电性能和热导率。

It is extensively practical and profession used in deaerate of raw materials, such as plastics, handicraft product, chemical engineering and porcelain and ceramics...etc.

该机广泛适用于塑胶、工艺品、化工、等原料需脱泡(真空)的各个行业.

The extract of Sophora japonica L. was processed by inorganic ceramic membrane, and the whole solid, effective ingredinent and flux of mebrane were examined.

用孔径为0.2μm的无机膜对槐米提取液进行微滤,对提取液微滤前后在总固体、性状、指标性成分、膜通量等方面的变化进行对比分析。

It has been studied that concentrated raw ceramics single -material-china stone ultrafines is mixed and homogenized by technology of computerized process control in this paper.

本文对经精选的单一原料—石,采用以计算机监控的掺和与均化技术,进行的试验研究进行了论述。

The characteristic and influencing factors of tools wear were analyzed through turning fluorophlogopite machinable ceramics.

对氟云母可加工陶瓷进行车削加工试验,分析了切削中刀具磨损特性,讨论了影响刀具磨损率。

Some ceramic works of art are shown in this exhibition.

这次展览会上展出了一些陶瓷艺术品。

The ceramic plates of air valves against abration, corrosion, dust, dirt, and sand.

陶瓷阀板耐磨、耐腐蚀、耐固体颗粒侵蚀，寿命长，适合各种气体、液体阀门密封。

After all my care in packing it, many of the ceramics arrived broken.

尽管我包得非常小心,瓷运到时还是坏了许多。

A separate inlet with a ceramic frit is used to aerate the perfusate.

用玻璃料制成一个独立进口暴露在灌流液中。

The surface glossiness of ceramic ware after glazing, especially the metallic sheen of lusterware.

通过往釉面上添加属氧化物而产生属光泽黏土制品。

The high-speed steel tool was not suitable for turning fluorophlogopite,and ceramics tool was ...

车削氟云母陶瓷对刀具磨损过程与切削属相似。

The worn surface morphology of ADZ ceramic was analyzed with a scanning electron microscope.

与去离子水相比,在小牛血清润滑条件下ADZ陶瓷摩擦数和磨损率降低。

The features and applications in superprecision turnings of piezoelectric ceramic inching motion devices are introduced.

介绍了压陶瓷微动机构性能特点及在超精密车削加工中多种用途。

Those ceramics are beautiful.

那些陶很好看。

Porous ceramic materials on the base of strontium zirconate were developed with zirconium dioxide,baddeleyite powder,and granular polysterol.

采用二氧化锆、斜锆矿粉、碳酸锶及粒状聚苯乙烯制成了锆酸锶多孔陶瓷材料。

Lead is also used in some seramic (ceramic) and vinol (vinyl) products, candles, hair colorings and other goods.

铅也可能被用于陶，乙烯基产品，蜡烛，染发剂和其他产品。

The effect of process parameters on the electric insulance of micro arc oxidated ceramic coat on aluminium plate is studied.

研究了工艺参数对铝微弧氧化陶瓷层绝缘性能影响规律。

In this paper .bridge-indentation method is adopted to precrack in ceramic specimens, and the advantage as well as disadvantage are discussed.

本文首先对桥压法预制原生裂纹进行了研究,然后针对桥压法存在问题提出了一种简便而有效陶瓷材料原生裂纹预制方法——静态膨胀法。

Writer discusses also the characteristic of silicon nitrid ceramic materials,and chooses this ceramic bearing used in the bottom of the reactor above.

论述了氮化硅陶瓷材料特点，选择了氮化硅陶瓷轴承作为有机硅室温胶搅拌釜底轴承并进行了相应设计。

In this process,microwave heating is used to make ceramic materials plastifying under a high temperature,so that a good machinability can be achieved.

该方法利用微波加热使陶瓷材料在较高温度下塑性化,从而获得到较好加工性。

To raise ozone output of ozonator,it demands that ceramic plate materials for ozonator have good dielectric properties and quite high thermal conductivity.

为了提高臭氧发生臭氧产量,要求臭氧发生用陶瓷基板材料具有较高介性能和热导率。

It is extensively practical and profession used in deaerate of raw materials, such as plastics, handicraft product, chemical engineering and porcelain and ceramics...etc.

该机广泛适用于塑胶、工艺品、化工、陶瓷等原料需脱泡(真空)各个行业.

The extract of Sophora japonica L. was processed by inorganic ceramic membrane, and the whole solid, effective ingredinent and flux of mebrane were examined.

用孔径为0.2μm无机陶瓷膜对槐米提取液进行微滤,对提取液微滤前后在总固体、性状、指标性成分、膜通量等方面变化进行对比分析。

It has been studied that concentrated raw ceramics single -material-china stone ultrafines is mixed and homogenized by technology of computerized process control in this paper.

本文对经精选陶瓷单一原料—瓷石,采用以计算机监控掺和与均化技术,进行试验研究进行了论述。

The characteristic and influencing factors of tools wear were analyzed through turning fluorophlogopite machinable ceramics.

对氟云母可加工进行车削加工试验,分析了切削中的刀具磨损特性,讨论了影响刀具磨损率的因素。

Some ceramic works of art are shown in this exhibition.

这次展览会上展出了一些艺术品。

The ceramic plates of air valves against abration, corrosion, dust, dirt, and sand.

阀板磨、腐、体颗粒侵，寿命长，适合各种气体、液体阀门的密封。

After all my care in packing it, many of the ceramics arrived broken.

尽管我包得非常小心,器运到时还是坏了许多。

A separate inlet with a ceramic frit is used to aerate the perfusate.

用玻料制成的一个独立进口暴露在灌流液中。

The surface glossiness of ceramic ware after glazing, especially the metallic sheen of lusterware.

通过往釉面上添加属氧化物而产生属光泽的黏土制品。

The high-speed steel tool was not suitable for turning fluorophlogopite,and ceramics tool was ...

车削氟云母对刀具磨损过程与切削属相似。

The worn surface morphology of ADZ ceramic was analyzed with a scanning electron microscope.

与去离子水相比,在小牛血清润滑条件下ADZ的摩擦因数和磨损率降低。

The features and applications in superprecision turnings of piezoelectric ceramic inching motion devices are introduced.

介绍了压电微动机构的性能特点及在超精密车削加工中的多种用途。

Those ceramics are beautiful.

那些器很好看。

Porous ceramic materials on the base of strontium zirconate were developed with zirconium dioxide,baddeleyite powder,and granular polysterol.

采用二氧化锆、斜锆矿粉、碳酸锶及粒状聚苯乙烯制成了锆酸锶多孔材料。

Lead is also used in some seramic (ceramic) and vinol (vinyl) products, candles, hair colorings and other goods.

铅也可能被用于器，乙烯基产品，蜡烛，染发剂和其他产品。

The effect of process parameters on the electric insulance of micro arc oxidated ceramic coat on aluminium plate is studied.

研究了工艺参数对铝微弧氧化层电绝缘性能的影响规律。

In this paper .bridge-indentation method is adopted to precrack in ceramic specimens, and the advantage as well as disadvantage are discussed.

本文首先对桥压法预制原生裂纹进行了研究,然后针对桥压法存在的问题提出了一种简便而有效的材料原生裂纹的预制方法——静态膨胀法。

Writer discusses also the characteristic of silicon nitrid ceramic materials,and chooses this ceramic bearing used in the bottom of the reactor above.

论述了氮化硅材料的特点，选择了氮化硅轴承作为有机硅室温胶搅拌釜底轴承并进行了相应设计。

In this process,microwave heating is used to make ceramic materials plastifying under a high temperature,so that a good machinability can be achieved.

该方法利用微波加热使材料在较高温度下塑性化,从而获得到较好的加工性。

To raise ozone output of ozonator,it demands that ceramic plate materials for ozonator have good dielectric properties and quite high thermal conductivity.

为了提高臭氧发生器的臭氧产量,要求臭氧发生器用的基板材料具有较高的介电性能和热导率。

It is extensively practical and profession used in deaerate of raw materials, such as plastics, handicraft product, chemical engineering and porcelain and ceramics...etc.

该机广泛适用于塑胶、工艺品、化工、等原料需脱泡(真空)的各个行业.

The extract of Sophora japonica L. was processed by inorganic ceramic membrane, and the whole solid, effective ingredinent and flux of mebrane were examined.

用孔径为0.2μm的无机膜对槐米提取液进行微滤,对提取液微滤前后在总体、性状、指标性成分、膜通量等方面的变化进行对比分析。

It has been studied that concentrated raw ceramics single -material-china stone ultrafines is mixed and homogenized by technology of computerized process control in this paper.

本文对经精选的单一原料—石,采用以计算机监控的掺和与均化技术,进行的试验研究进行了论述。

The characteristic and influencing factors of tools wear were analyzed through turning fluorophlogopite machinable ceramics.

对氟云母可加工瓷进行车削加工试验,分析了切削中刀具磨损特性,讨论了影响刀具磨损素。

Some ceramic works of art are shown in this exhibition.

这次展览会上展出了一些瓷艺术品。

The ceramic plates of air valves against abration, corrosion, dust, dirt, and sand.

瓷阀板耐磨、耐腐蚀、耐固体颗粒侵蚀，寿命长，适合各种气体、液体阀门密封。

After all my care in packing it, many of the ceramics arrived broken.

尽管我包得非常小心,瓷运到时还是坏了许多。

A separate inlet with a ceramic frit is used to aerate the perfusate.

用玻璃料制成一个独立进口暴露在灌流液中。

The surface glossiness of ceramic ware after glazing, especially the metallic sheen of lusterware.

通过往釉面上添加属氧化物而产生属光泽黏土制品。

The high-speed steel tool was not suitable for turning fluorophlogopite,and ceramics tool was ...

车削氟云母瓷对刀具磨损过程与切削属相似。

The worn surface morphology of ADZ ceramic was analyzed with a scanning electron microscope.

与去离子水相比,在小牛血清润滑条件下ADZ瓷摩擦数和磨损降低。

The features and applications in superprecision turnings of piezoelectric ceramic inching motion devices are introduced.

介绍了压电瓷微动机构性能特点及在超精密车削加工中多种用途。

Those ceramics are beautiful.

那些很好看。

Porous ceramic materials on the base of strontium zirconate were developed with zirconium dioxide,baddeleyite powder,and granular polysterol.

采用二氧化锆、斜锆矿粉、碳酸锶及粒状聚苯乙烯制成了锆酸锶多孔瓷材料。

Lead is also used in some seramic (ceramic) and vinol (vinyl) products, candles, hair colorings and other goods.

铅也可能被用于，乙烯基产品，蜡烛，染发剂和其他产品。

The effect of process parameters on the electric insulance of micro arc oxidated ceramic coat on aluminium plate is studied.

研究了工艺参数对铝微弧氧化瓷层电绝缘性能影响规律。

In this paper .bridge-indentation method is adopted to precrack in ceramic specimens, and the advantage as well as disadvantage are discussed.

本文首先对桥压法预制原生裂纹进行了研究,然后针对桥压法存在问题提出了一种简便而有效瓷材料原生裂纹预制方法——静态膨胀法。

Writer discusses also the characteristic of silicon nitrid ceramic materials,and chooses this ceramic bearing used in the bottom of the reactor above.

论述了氮化硅瓷材料特点，选择了氮化硅瓷轴承作为有机硅室温胶搅拌釜底轴承并进行了相应设计。

In this process,microwave heating is used to make ceramic materials plastifying under a high temperature,so that a good machinability can be achieved.

该方法利用微波加热使瓷材料在较高温度下塑性化,从而获得到较好加工性。

To raise ozone output of ozonator,it demands that ceramic plate materials for ozonator have good dielectric properties and quite high thermal conductivity.

为了提高臭氧发生臭氧产量,要求臭氧发生用瓷基板材料具有较高介电性能和热导。

It is extensively practical and profession used in deaerate of raw materials, such as plastics, handicraft product, chemical engineering and porcelain and ceramics...etc.

该机广泛适用于塑胶、工艺品、化工、瓷等原料需脱泡(真空)各个行业.

The extract of Sophora japonica L. was processed by inorganic ceramic membrane, and the whole solid, effective ingredinent and flux of mebrane were examined.

用孔径为0.2μm无机瓷膜对槐米提取液进行微滤,对提取液微滤前后在总固体、性状、指标性成分、膜通量等方面变化进行对比分析。

It has been studied that concentrated raw ceramics single -material-china stone ultrafines is mixed and homogenized by technology of computerized process control in this paper.

本文对经精选瓷单一原料—瓷石,采用以计算机监控掺和与均化技术,进行试验研究进行了论述。

The characteristic and influencing factors of tools wear were analyzed through turning fluorophlogopite machinable ceramics.

对氟云母可加工陶车削加工试验,分析了切削中的刀具磨损特性,讨论了影响刀具磨损率的因素。

Some ceramic works of art are shown in this exhibition.

这次展览会上展出了一些陶艺术品。

The ceramic plates of air valves against abration, corrosion, dust, dirt, and sand.

陶阀板耐磨、耐腐蚀、耐固体颗粒侵蚀，寿命长，适合各种气体、液体阀门的密封。

After all my care in packing it, many of the ceramics arrived broken.

尽管我包得非常小心,器运到时还是坏了许多。

A separate inlet with a ceramic frit is used to aerate the perfusate.

用玻璃料制成的一个独立口暴露在灌流液中。

The surface glossiness of ceramic ware after glazing, especially the metallic sheen of lusterware.

通过往釉面上添加属氧化物而产生属光泽的黏土制品。

The high-speed steel tool was not suitable for turning fluorophlogopite,and ceramics tool was ...

车削氟云母陶对刀具磨损过程与切削属相似。

The worn surface morphology of ADZ ceramic was analyzed with a scanning electron microscope.

与去离子水相比,在小牛血清润滑条件下ADZ陶的摩擦因数和磨损率降低。

The features and applications in superprecision turnings of piezoelectric ceramic inching motion devices are introduced.

介绍了压电陶微动机构的性能特点及在超精密车削加工中的多种用途。

Those ceramics are beautiful.

那些陶器很好看。

Porous ceramic materials on the base of strontium zirconate were developed with zirconium dioxide,baddeleyite powder,and granular polysterol.

采用二氧化锆、斜锆矿粉、碳酸锶及粒状聚苯乙烯制成了锆酸锶多孔陶材料。

Lead is also used in some seramic (ceramic) and vinol (vinyl) products, candles, hair colorings and other goods.

铅也可能被用于陶器，乙烯基产品，蜡烛，染发剂和其他产品。

The effect of process parameters on the electric insulance of micro arc oxidated ceramic coat on aluminium plate is studied.

研究了工艺参数对铝微弧氧化陶层电绝缘性能的影响规律。

In this paper .bridge-indentation method is adopted to precrack in ceramic specimens, and the advantage as well as disadvantage are discussed.

本文首先对桥压法预制原生裂纹了研究,然后针对桥压法存在的问题提出了一种简便而有效的陶材料原生裂纹的预制方法——静态膨胀法。

Writer discusses also the characteristic of silicon nitrid ceramic materials,and chooses this ceramic bearing used in the bottom of the reactor above.

论述了氮化硅陶材料的特点，选择了氮化硅陶轴承作为有机硅室温胶搅拌釜底轴承并了相应设计。

In this process,microwave heating is used to make ceramic materials plastifying under a high temperature,so that a good machinability can be achieved.

该方法利用微波加热使陶材料在较高温度下塑性化,从而获得到较好的加工性。

To raise ozone output of ozonator,it demands that ceramic plate materials for ozonator have good dielectric properties and quite high thermal conductivity.

为了提高臭氧发生器的臭氧产量,要求臭氧发生器用的陶基板材料具有较高的介电性能和热导率。

It is extensively practical and profession used in deaerate of raw materials, such as plastics, handicraft product, chemical engineering and porcelain and ceramics...etc.

该机广泛适用于塑胶、工艺品、化工、陶等原料需脱泡(真空)的各个业.

The extract of Sophora japonica L. was processed by inorganic ceramic membrane, and the whole solid, effective ingredinent and flux of mebrane were examined.

用孔径为0.2μm的无机陶膜对槐米提取液微滤,对提取液微滤前后在总固体、性状、指标性成分、膜通量等方面的变化对比分析。

It has been studied that concentrated raw ceramics single -material-china stone ultrafines is mixed and homogenized by technology of computerized process control in this paper.

本文对经精选的陶单一原料—石,采用以计算机监控的掺和与均化技术,的试验研究了论述。