The external inspirator is available to drive the resonator to produce traveling wave.Under resonant frequency the distortion of resonator reached a peak.

外激励的驱动方式可以使扁环型谐振有效的行波分量，在谐振频率下，谐振腔的综合变形量最。

The technique character of the baffle of inspirator was introduced.A feasible process plan was determined and the integral piercing blanking bending forming die was designed.

介绍了呼吸器挡板零件工艺特点,确定了合理的工艺方案,1落料、冲孔、压弯三道工序一次成形的模具。

The external inspirator is available to drive the resonator to produce traveling wave.Under resonant frequency the distortion of resonator reached a peak.

励驱动方式可以使扁环型谐振管产生有效行波分量，在谐振频率下，谐振管腔综合变形量最。

The technique character of the baffle of inspirator was introduced.A feasible process plan was determined and the integral piercing blanking bending forming die was designed.

介绍了呼吸器挡板零件工艺特点,确定了合理工艺方案,设计1副落料、冲孔、压弯三道工序一次成形。

The external inspirator is available to drive the resonator to produce traveling wave.Under resonant frequency the distortion of resonator reached a peak.

外激励的驱动方式可以使扁环管产生有效的行波分量，在频率下，管腔的综合变形量最。

The technique character of the baffle of inspirator was introduced.A feasible process plan was determined and the integral piercing blanking bending forming die was designed.

介绍了呼吸器挡板零件工艺特点,确定了合理的工艺方案,设计1副、孔、压弯三道工序一次成形的模具。

The external inspirator is available to drive the resonator to produce traveling wave.Under resonant frequency the distortion of resonator reached a peak.

外激励的驱动方式可以使扁环型振管产生有效的行波分，振频率下，振管腔的综变形最。

The technique character of the baffle of inspirator was introduced.A feasible process plan was determined and the integral piercing blanking bending forming die was designed.

介绍呼吸器挡板零件工艺特点,确理的工艺方案,设计1副落料、冲孔、压弯三道工序一次成形的模具。

The external inspirator is available to drive the resonator to produce traveling wave.Under resonant frequency the distortion of resonator reached a peak.

外激励的驱动方式可以使扁环型谐产生有效的行波分量，在谐频率下，谐的综合变形量最。

The technique character of the baffle of inspirator was introduced.A feasible process plan was determined and the integral piercing blanking bending forming die was designed.

介绍了呼吸器挡件工艺特点,确定了合理的工艺方案,设计1副落料、冲孔、压弯三道工序一次成形的模具。

The external inspirator is available to drive the resonator to produce traveling wave.Under resonant frequency the distortion of resonator reached a peak.

外激励的驱动方式可以使扁环型谐振管产生有效的行波量，在谐振频率下，谐振管腔的综合变形量最。

The technique character of the baffle of inspirator was introduced.A feasible process plan was determined and the integral piercing blanking bending forming die was designed.

介绍了呼器挡板零件工艺特点,确定了合理的工艺方案,设计1副落料、冲孔、压弯三道工序一次成形的模具。

The external inspirator is available to drive the resonator to produce traveling wave.Under resonant frequency the distortion of resonator reached a peak.

外激励的驱动方式可以使扁环型谐振管产生有效的行波分量，在谐振频率下，谐振管腔的综合变形量最。

The technique character of the baffle of inspirator was introduced.A feasible process plan was determined and the integral piercing blanking bending forming die was designed.

介绍了呼吸器挡板零件工艺特点,确定了合理的工艺方案,设计1副落料、冲孔、压弯三道工序一次成形的模具。

The external inspirator is available to drive the resonator to produce traveling wave.Under resonant frequency the distortion of resonator reached a peak.

外励的驱动方式可以使扁环型谐振管产生有效的行波分量，在谐振频率下，谐振管腔的综合变形量最。

The technique character of the baffle of inspirator was introduced.A feasible process plan was determined and the integral piercing blanking bending forming die was designed.

介绍了呼吸器挡板零件工艺特点,确定了合理的工艺方案,设计1副落料、冲孔、压弯三道工序一次成形的模具。

The external inspirator is available to drive the resonator to produce traveling wave.Under resonant frequency the distortion of resonator reached a peak.

外激励的驱可以使扁环型谐振管产生有效的行波分量，在谐振频率下，谐振管腔的综合变形量最。

The technique character of the baffle of inspirator was introduced.A feasible process plan was determined and the integral piercing blanking bending forming die was designed.

介绍了呼吸器挡板零件艺特点,确定了合理的艺案,设计1副落料、冲孔、压弯三道次成形的模具。