This article mainly researches on the causes and controlling of ultra-low carbon steel carburetion.

重点研究了鞍厂超低碳增碳原因及控制措施。

This paper studied emphatically the heat steadiness of naphthaline and compatibility of naphthaline with carbon steel.

本文着重对萘的热稳定性以及碳萘间的相容性进行实研究.

Al dip calorizing of carbon steel and structure and properties of surface layer of aluminized steel were described.

介绍了碳表面热浸镀铝工艺镀铝层组织结构特征。

Note the material and anticorrosion requirements of Sand Scraper, Harrower, Otherwise supplied according to carbon steel with normal anticorrosion.

分别注明刮砂机、耙砂机的材质要求，不注明表示均按碳普通订货。

By way of “raising high carbon content and post blowing” as well as recarburization practice can the high carbon steel of fine quality be refined in the converter.

通过“高拉补吹”、炉后增碳工艺，转炉能够冶出合格的高碳。

This article mainly researches on the causes and controlling of ultra-low carbon steel carburetion.

重点研究鞍钢二炼钢厂超低钢增原因及控制措施。

This paper studied emphatically the heat steadiness of naphthaline and compatibility of naphthaline with carbon steel.

本文着重对萘的热稳定以及钢萘间的进行实研究.

Al dip calorizing of carbon steel and structure and properties of surface layer of aluminized steel were described.

介钢表面热浸镀铝工艺和镀铝层组织结构特征。

Note the material and anticorrosion requirements of Sand Scraper, Harrower, Otherwise supplied according to carbon steel with normal anticorrosion.

分别注明刮砂机、耙砂机的材质和防腐要求，不注明表示均按钢和普通防腐订货。

By way of “raising high carbon content and post blowing” as well as recarburization practice can the high carbon steel of fine quality be refined in the converter.

通过“高拉补吹”、炉后增工艺，转炉能够冶炼出合格的高钢。

This article mainly researches on the causes and controlling of ultra-low carbon steel carburetion.

重点研究了鞍二炼厂超低碳增碳原因及控制措施。

This paper studied emphatically the heat steadiness of naphthaline and compatibility of naphthaline with carbon steel.

本文着重对萘的热稳定性以及碳萘间的相容性进行实研究.

Al dip calorizing of carbon steel and structure and properties of surface layer of aluminized steel were described.

介绍了碳表面热浸镀铝工艺和镀铝层组织结构特征。

Note the material and anticorrosion requirements of Sand Scraper, Harrower, Otherwise supplied according to carbon steel with normal anticorrosion.

分别注明刮砂机、耙砂机的材质和防腐要求，不注明表示均按碳和普通防腐订货。

By way of “raising high carbon content and post blowing” as well as recarburization practice can the high carbon steel of fine quality be refined in the converter.

通过“吹”、炉后增碳工艺，转炉能够冶炼出合格的碳。

This article mainly researches on the causes and controlling of ultra-low carbon steel carburetion.

重点研究了鞍二炼厂超低碳增碳原因及控制措施。

This paper studied emphatically the heat steadiness of naphthaline and compatibility of naphthaline with carbon steel.

本文着重对萘的热稳定性以及碳萘间的相容性进行实研究.

Al dip calorizing of carbon steel and structure and properties of surface layer of aluminized steel were described.

介绍了碳表面热浸镀铝工艺和镀铝层组织结构特征。

Note the material and anticorrosion requirements of Sand Scraper, Harrower, Otherwise supplied according to carbon steel with normal anticorrosion.

分别注明刮砂机、耙砂机的材质和防腐要求，不注明表示均按碳和普通防腐订货。

By way of “raising high carbon content and post blowing” as well as recarburization practice can the high carbon steel of fine quality be refined in the converter.

通过“吹”、炉后增碳工艺，转炉能够冶炼出合格的碳。

This article mainly researches on the causes and controlling of ultra-low carbon steel carburetion.

重点研究了鞍钢二炼钢厂超低碳钢增碳原因及控制措施。

This paper studied emphatically the heat steadiness of naphthaline and compatibility of naphthaline with carbon steel.

重对萘的热稳定性以及碳钢萘间的相容性进行实研究.

Al dip calorizing of carbon steel and structure and properties of surface layer of aluminized steel were described.

介绍了碳钢表面热浸镀铝工艺和镀铝层组织征。

Note the material and anticorrosion requirements of Sand Scraper, Harrower, Otherwise supplied according to carbon steel with normal anticorrosion.

分别注明刮砂机、耙砂机的材质和防腐要求，不注明表示均按碳钢和普通防腐订货。

By way of “raising high carbon content and post blowing” as well as recarburization practice can the high carbon steel of fine quality be refined in the converter.

通过“高拉补吹”、炉后增碳工艺，转炉能够冶炼出合格的高碳钢。

This article mainly researches on the causes and controlling of ultra-low carbon steel carburetion.

研究了鞍钢二炼钢厂超低碳钢增碳原因及控制措施。

This paper studied emphatically the heat steadiness of naphthaline and compatibility of naphthaline with carbon steel.

本文着对萘的热稳定性以及碳钢萘间的相容性进行实研究.

Al dip calorizing of carbon steel and structure and properties of surface layer of aluminized steel were described.

介绍了碳钢面热浸镀铝工艺和镀铝层组织结构特征。

Note the material and anticorrosion requirements of Sand Scraper, Harrower, Otherwise supplied according to carbon steel with normal anticorrosion.

分别注明刮砂机、耙砂机的材质和防腐要求，不注明按碳钢和普通防腐订货。

By way of “raising high carbon content and post blowing” as well as recarburization practice can the high carbon steel of fine quality be refined in the converter.

通过“高拉补吹”、炉后增碳工艺，转炉能够冶炼出合格的高碳钢。

This article mainly researches on the causes and controlling of ultra-low carbon steel carburetion.

点研究了鞍钢二炼钢厂超低碳钢增碳原因及控制措施。

This paper studied emphatically the heat steadiness of naphthaline and compatibility of naphthaline with carbon steel.

本对萘的热稳定性以及碳钢萘间的相容性进行实研究.

Al dip calorizing of carbon steel and structure and properties of surface layer of aluminized steel were described.

介绍了碳钢表面热浸镀铝工艺和镀铝层组特征。

Note the material and anticorrosion requirements of Sand Scraper, Harrower, Otherwise supplied according to carbon steel with normal anticorrosion.

分别注明刮砂机、耙砂机的材质和防腐要求，不注明表示均按碳钢和普通防腐订货。

By way of “raising high carbon content and post blowing” as well as recarburization practice can the high carbon steel of fine quality be refined in the converter.

通过“高拉补吹”、炉后增碳工艺，转炉能够冶炼出合格的高碳钢。

This article mainly researches on the causes and controlling of ultra-low carbon steel carburetion.

重点了鞍钢二炼钢厂超低碳钢增碳原因及控制措施。

This paper studied emphatically the heat steadiness of naphthaline and compatibility of naphthaline with carbon steel.

本文着重对萘的热稳定性以及碳钢萘间的相容性.

Al dip calorizing of carbon steel and structure and properties of surface layer of aluminized steel were described.

绍了碳钢表面热浸镀铝工艺和镀铝层组织结构特征。

Note the material and anticorrosion requirements of Sand Scraper, Harrower, Otherwise supplied according to carbon steel with normal anticorrosion.

分别注明刮砂机、耙砂机的材质和防腐要求，不注明表示均按碳钢和普通防腐订货。

By way of “raising high carbon content and post blowing” as well as recarburization practice can the high carbon steel of fine quality be refined in the converter.

通过“高拉补吹”、炉后增碳工艺，转炉能够冶炼出合格的高碳钢。

This article mainly researches on the causes and controlling of ultra-low carbon steel carburetion.

重点研究鞍钢二炼钢厂超低碳钢增碳原因及控制措施。

This paper studied emphatically the heat steadiness of naphthaline and compatibility of naphthaline with carbon steel.

本文着重对萘的热稳定以及碳钢萘间的相行实研究.

Al dip calorizing of carbon steel and structure and properties of surface layer of aluminized steel were described.

碳钢表面热浸镀铝工艺和镀铝层组织结构特征。

Note the material and anticorrosion requirements of Sand Scraper, Harrower, Otherwise supplied according to carbon steel with normal anticorrosion.

分别注明刮砂机、耙砂机的材质和防腐要求，不注明表示均按碳钢和普通防腐订货。

By way of “raising high carbon content and post blowing” as well as recarburization practice can the high carbon steel of fine quality be refined in the converter.

通过“高拉补吹”、炉后增碳工艺，转炉能够冶炼出合格的高碳钢。