The fabrication processing of unidirectional short carbon and Nicalon fiberreinforced LAS composites was investigated.

研究短纤维增强玻璃陶瓷基复合材料制备工艺中的短纤维分散和单向纤维预浸片制备。

The ceramic plates of air valves against abration, corrosion, dust, dirt, and sand.

陶瓷阀板耐磨、耐腐蚀、耐固体颗粒侵蚀，寿命长，适合各种气体、液体阀门的密封。

The characteristic and influencing factors of tools wear were analyzed through turning fluorophlogopite machinable ceramics.

对氟金云母可加工陶瓷进行车削加工试验,分析切削中的刀具磨损特性,讨响刀具磨损率的因素。

The brickmaking,smelting,china,filature, weaving and such handiworks had appeared early in the Ming Period.

早在明代就有制砖、冶坊、陶瓷、缫丝、织布等手工业。

Some ceramic works of art are shown in this exhibition.

这次展览会上展出一些陶瓷艺术品。

The features and applications in superprecision turnings of piezoelectric ceramic inching motion devices are introduced.

介绍压电陶瓷微动机构的性能特点及在超密车削加工中的多种用途。

The high-speed steel tool was not suitable for turning fluorophlogopite,and ceramics tool was ...

车削氟金云母陶瓷对刀具磨损过程与切削金属相似。

Piezoceramics telescopic micro-actuator was used in design of micro-gripper of robot.

机器人微操作手设计采用压电伸缩陶瓷微位移器。

The worn surface morphology of ADZ ceramic was analyzed with a scanning electron microscope.

与去离子水相比,在小牛滑条件下ADZ陶瓷的摩擦因数和磨损率降低。

Porous ceramic materials on the base of strontium zirconate were developed with zirconium dioxide,baddeleyite powder,and granular polysterol.

采用二氧化锆、斜锆矿粉、碳酸锶及粒状聚苯乙烯制成锆酸锶多孔陶瓷材料。

Sinter type fastigiate-handle drills:Use for drilling hard and brickle material,...

简 介: 烧结锥柄钻头：适用于玻璃、陶瓷等硬性材料的钻孔。

We specialize in producing and selling all kinds of top grade ormolu of decoration, European furniture and daily use.

公司主要生产和销售各式高档家居陈设陶瓷、欧美系列家居及日用品。

Ultrafine zircon powder with high purity is a kind of brightening agent in glaze for making high-grade cleaning whiteware.

高纯超细锆英石粉是制造高档卫生洁具陶瓷所用釉料中的乳浊增白剂。

The effect of process parameters on the electric insulance of micro arc oxidated ceramic coat on aluminium plate is studied.

研究工艺参数对铝微弧氧化陶瓷层电绝缘性能的响规律。

Cupping A treatment inducing local decongestion by a heated cup made of bamboo, porcelain or glass being placed on the body.

拔火罐是以竹筒、陶瓷或玻璃制成的小罐，加热后吸附在身体表面，引起局部充的一种治疗方法。

In this paper .bridge-indentation method is adopted to precrack in ceramic specimens, and the advantage as well as disadvantage are discussed.

本文首先对桥压法预制原生裂纹进行研究,然后针对桥压法存在的问题提出一种简便而有效的陶瓷材料原生裂纹的预制方法——静态膨胀法。

In this process,microwave heating is used to make ceramic materials plastifying under a high temperature,so that a good machinability can be achieved.

该方法利用微波加热使陶瓷材料在较高温度下塑性化,从而获得到较好的加工性。

To raise ozone output of ozonator,it demands that ceramic plate materials for ozonator have good dielectric properties and quite high thermal conductivity.

为提高臭氧发生器的臭氧产量,要求臭氧发生器用的陶瓷基板材料具有较高的介电性能和热导率。

Writer discusses also the characteristic of silicon nitrid ceramic materials,and chooses this ceramic bearing used in the bottom of the reactor above.

述氮化硅陶瓷材料的特点，选择氮化硅陶瓷轴承作为有机硅室温胶搅拌釜底轴承并进行相应设计。

As a non-glazed type,boccaro ware achieves its visual effect from its form and structure rather than the decorations of glazed, colored drawing.

紫砂器是一种无釉陶，它并非以釉彩绘画的装饰来达到陶瓷艺术中美的效果，而是通过造型结构来表达其外观美。

The fabrication processing of unidirectional short carbon and Nicalon fiberreinforced LAS composites was investigated.

研究了短纤维增强玻璃陶瓷基复合料备工艺中的短纤维分散和单向纤维预备。

The ceramic plates of air valves against abration, corrosion, dust, dirt, and sand.

陶瓷阀板耐磨、耐腐蚀、耐固体颗粒侵蚀，寿命长，适合各种气体、液体阀门的密封。

The characteristic and influencing factors of tools wear were analyzed through turning fluorophlogopite machinable ceramics.

对氟金云母可加工陶瓷进行车削加工试验,分析了切削中的刀具磨损特,讨论了影响刀具磨损率的因素。

The brickmaking,smelting,china,filature, weaving and such handiworks had appeared early in the Ming Period.

早在明代就有砖、冶坊、陶瓷、缫丝、织布等手工业。

Some ceramic works of art are shown in this exhibition.

这次展览会上展出了一些陶瓷艺术品。

The features and applications in superprecision turnings of piezoelectric ceramic inching motion devices are introduced.

介绍了压电陶瓷微动机构的能特点及在超密车削加工中的多种用途。

The high-speed steel tool was not suitable for turning fluorophlogopite,and ceramics tool was ...

车削氟金云母陶瓷对刀具磨损过程与切削金属相似。

Piezoceramics telescopic micro-actuator was used in design of micro-gripper of robot.

机器人微操作手设计采用压电伸缩陶瓷微位移器。

The worn surface morphology of ADZ ceramic was analyzed with a scanning electron microscope.

与去离子水相比,在小牛血清润滑条件下ADZ陶瓷的摩擦因数和磨损率降低。

Porous ceramic materials on the base of strontium zirconate were developed with zirconium dioxide,baddeleyite powder,and granular polysterol.

采用二氧化锆、斜锆矿粉、碳酸锶及粒状聚苯乙烯成了锆酸锶多孔陶瓷料。

Sinter type fastigiate-handle drills:Use for drilling hard and brickle material,...

简 介: 烧结锥柄钻头：适用于玻璃、陶瓷等料的钻孔。

We specialize in producing and selling all kinds of top grade ormolu of decoration, European furniture and daily use.

公司主要生产和销售各式高档家居陈设陶瓷、欧美系列家居及日用品。

Ultrafine zircon powder with high purity is a kind of brightening agent in glaze for making high-grade cleaning whiteware.

高纯超细锆英石粉是造高档卫生洁具陶瓷所用釉料中的乳浊增白剂。

The effect of process parameters on the electric insulance of micro arc oxidated ceramic coat on aluminium plate is studied.

研究了工艺参数对铝微弧氧化陶瓷层电绝缘能的影响规律。

Cupping A treatment inducing local decongestion by a heated cup made of bamboo, porcelain or glass being placed on the body.

拔火罐是以竹筒、陶瓷或玻璃成的小罐，加热后吸附在身体表面，引起局部充血的一种治疗方法。

In this paper .bridge-indentation method is adopted to precrack in ceramic specimens, and the advantage as well as disadvantage are discussed.

本文首先对桥压法预原生裂纹进行了研究,然后针对桥压法存在的问题提出了一种简便而有效的陶瓷料原生裂纹的预方法——静态膨胀法。

In this process,microwave heating is used to make ceramic materials plastifying under a high temperature,so that a good machinability can be achieved.

该方法利用微波加热使陶瓷料在较高温度下塑化,从而获得到较好的加工。

To raise ozone output of ozonator,it demands that ceramic plate materials for ozonator have good dielectric properties and quite high thermal conductivity.

为了提高臭氧发生器的臭氧产量,要求臭氧发生器用的陶瓷基板料具有较高的介电能和热导率。

Writer discusses also the characteristic of silicon nitrid ceramic materials,and chooses this ceramic bearing used in the bottom of the reactor above.

论述了氮化硅陶瓷料的特点，选择了氮化硅陶瓷轴承作为有机硅室温胶搅拌釜底轴承并进行了相应设计。

As a non-glazed type,boccaro ware achieves its visual effect from its form and structure rather than the decorations of glazed, colored drawing.

紫砂器是一种无釉陶，它并非以釉彩绘画的装饰来达到陶瓷艺术中美的效果，而是通过造型结构来表达其外观美。

The fabrication processing of unidirectional short carbon and Nicalon fiberreinforced LAS composites was investigated.

研究了短纤维增强玻璃陶瓷基复合制备工艺中的短纤维分散和单向纤维制备。

The ceramic plates of air valves against abration, corrosion, dust, dirt, and sand.

陶瓷阀板耐磨、耐腐蚀、耐固体颗粒侵蚀，寿命长，适合各种气体、液体阀门的密封。

The characteristic and influencing factors of tools wear were analyzed through turning fluorophlogopite machinable ceramics.

对氟金云母可加工陶瓷进行车削加工试验,分析了切削中的刀具磨损特,讨论了影响刀具磨损率的因素。

The brickmaking,smelting,china,filature, weaving and such handiworks had appeared early in the Ming Period.

早在明代就有制砖、冶坊、陶瓷、缫丝、织布等手工业。

Some ceramic works of art are shown in this exhibition.

这次展览会上展出了一些陶瓷艺术品。

The features and applications in superprecision turnings of piezoelectric ceramic inching motion devices are introduced.

介绍了压电陶瓷微动机构的能特点及在超密车削加工中的多种用途。

The high-speed steel tool was not suitable for turning fluorophlogopite,and ceramics tool was ...

车削氟金云母陶瓷对刀具磨损过程与切削金属相似。

Piezoceramics telescopic micro-actuator was used in design of micro-gripper of robot.

机器人微操作手设计采用压电伸缩陶瓷微位移器。

The worn surface morphology of ADZ ceramic was analyzed with a scanning electron microscope.

与去离子水相比,在小牛血清润滑条件下ADZ陶瓷的摩擦因数和磨损率降低。

Porous ceramic materials on the base of strontium zirconate were developed with zirconium dioxide,baddeleyite powder,and granular polysterol.

采用二氧化锆、斜锆矿粉、碳酸锶及粒状聚苯乙烯制成了锆酸锶多孔陶瓷。

Sinter type fastigiate-handle drills:Use for drilling hard and brickle material,...

简 介: 烧结锥柄钻头：适用于玻璃、陶瓷等硬的钻孔。

We specialize in producing and selling all kinds of top grade ormolu of decoration, European furniture and daily use.

公司主要生产和销售各式高档家居陈设陶瓷、欧美系列家居及日用品。

Ultrafine zircon powder with high purity is a kind of brightening agent in glaze for making high-grade cleaning whiteware.

高纯超细锆英石粉是制造高档卫生洁具陶瓷所用釉中的乳浊增白剂。

The effect of process parameters on the electric insulance of micro arc oxidated ceramic coat on aluminium plate is studied.

研究了工艺参数对铝微弧氧化陶瓷层电绝缘能的影响规律。

Cupping A treatment inducing local decongestion by a heated cup made of bamboo, porcelain or glass being placed on the body.

拔火罐是以竹筒、陶瓷或玻璃制成的小罐，加热后吸附在身体表面，引起局部充血的一种治疗方法。

In this paper .bridge-indentation method is adopted to precrack in ceramic specimens, and the advantage as well as disadvantage are discussed.

本文首先对桥压法制原生裂纹进行了研究,然后针对桥压法存在的问题提出了一种简便而有效的陶瓷原生裂纹的制方法——静态膨胀法。

In this process,microwave heating is used to make ceramic materials plastifying under a high temperature,so that a good machinability can be achieved.

该方法利用微波加热使陶瓷在较高温度下塑化,从而获得到较好的加工。

To raise ozone output of ozonator,it demands that ceramic plate materials for ozonator have good dielectric properties and quite high thermal conductivity.

为了提高臭氧发生器的臭氧产量,要求臭氧发生器用的陶瓷基板具有较高的介电能和热导率。

Writer discusses also the characteristic of silicon nitrid ceramic materials,and chooses this ceramic bearing used in the bottom of the reactor above.

论述了氮化硅陶瓷的特点，选择了氮化硅陶瓷轴承作为有机硅室温胶搅拌釜底轴承并进行了相应设计。

As a non-glazed type,boccaro ware achieves its visual effect from its form and structure rather than the decorations of glazed, colored drawing.

紫砂器是一种无釉陶，它并非以釉彩绘画的装饰来达到陶瓷艺术中美的效果，而是通过造型结构来表达其外观美。

The fabrication processing of unidirectional short carbon and Nicalon fiberreinforced LAS composites was investigated.

研究了短纤维增强玻璃陶基复合材料制备工艺中的短纤维分散和单向纤维预浸片制备。

The ceramic plates of air valves against abration, corrosion, dust, dirt, and sand.

陶阀板耐磨、耐腐蚀、耐固体颗粒侵蚀，寿命长，适合各种气体、液体阀门的密封。

The characteristic and influencing factors of tools wear were analyzed through turning fluorophlogopite machinable ceramics.

对氟金云母可加工陶进行加工试验,分析了切中的刀具磨损特性,讨论了影响刀具磨损率的因素。

The brickmaking,smelting,china,filature, weaving and such handiworks had appeared early in the Ming Period.

早在明代就有制砖、冶坊、陶、缫丝、织布等手工业。

Some ceramic works of art are shown in this exhibition.

这次展览会上展出了一些陶艺术品。

The features and applications in superprecision turnings of piezoelectric ceramic inching motion devices are introduced.

介绍了压电陶机构的性能特点及在超密加工中的多种用。

The high-speed steel tool was not suitable for turning fluorophlogopite,and ceramics tool was ...

氟金云母陶对刀具磨损过程与切金属相似。

Piezoceramics telescopic micro-actuator was used in design of micro-gripper of robot.

机器人操作手设计采用压电伸缩陶位移器。

The worn surface morphology of ADZ ceramic was analyzed with a scanning electron microscope.

与去离子水相比,在小牛血清润滑条件下ADZ陶的摩擦因数和磨损率降低。

Porous ceramic materials on the base of strontium zirconate were developed with zirconium dioxide,baddeleyite powder,and granular polysterol.

采用二氧化锆、斜锆矿粉、碳酸锶及粒状聚苯乙烯制成了锆酸锶多孔陶材料。

Sinter type fastigiate-handle drills:Use for drilling hard and brickle material,...

简 介: 烧结锥柄钻头：适用于玻璃、陶等硬性材料的钻孔。

We specialize in producing and selling all kinds of top grade ormolu of decoration, European furniture and daily use.

公司主要生产和销售各式高档家居陈设陶、欧美系列家居及日用品。

Ultrafine zircon powder with high purity is a kind of brightening agent in glaze for making high-grade cleaning whiteware.

高纯超细锆英石粉是制造高档卫生洁具陶所用釉料中的乳浊增白剂。

The effect of process parameters on the electric insulance of micro arc oxidated ceramic coat on aluminium plate is studied.

研究了工艺参数对铝弧氧化陶层电绝缘性能的影响规律。

Cupping A treatment inducing local decongestion by a heated cup made of bamboo, porcelain or glass being placed on the body.

拔火罐是以竹筒、陶或玻璃制成的小罐，加热后吸附在身体表面，引起局部充血的一种治疗方法。

In this paper .bridge-indentation method is adopted to precrack in ceramic specimens, and the advantage as well as disadvantage are discussed.

本文首先对桥压法预制原生裂纹进行了研究,然后针对桥压法存在的问题提出了一种简便而有效的陶材料原生裂纹的预制方法——静态膨胀法。

In this process,microwave heating is used to make ceramic materials plastifying under a high temperature,so that a good machinability can be achieved.

该方法利用波加热使陶材料在较高温度下塑性化,从而获得到较好的加工性。

To raise ozone output of ozonator,it demands that ceramic plate materials for ozonator have good dielectric properties and quite high thermal conductivity.

为了提高臭氧发生器的臭氧产量,要求臭氧发生器用的陶基板材料具有较高的介电性能和热导率。

Writer discusses also the characteristic of silicon nitrid ceramic materials,and chooses this ceramic bearing used in the bottom of the reactor above.

论述了氮化硅陶材料的特点，选择了氮化硅陶轴承作为有机硅室温胶搅拌釜底轴承并进行了相应设计。

As a non-glazed type,boccaro ware achieves its visual effect from its form and structure rather than the decorations of glazed, colored drawing.

紫砂器是一种无釉陶，它并非以釉彩绘画的装饰来达到陶艺术中美的效果，而是通过造型结构来表达其外观美。

The fabrication processing of unidirectional short carbon and Nicalon fiberreinforced LAS composites was investigated.

研究了短纤维增强玻璃陶基复合材料制备工中的短纤维分散和单向纤维预浸片制备。

The ceramic plates of air valves against abration, corrosion, dust, dirt, and sand.

陶阀板耐、耐腐蚀、耐固体颗粒侵蚀，寿命长，适合各种气体、液体阀门的密封。

The characteristic and influencing factors of tools wear were analyzed through turning fluorophlogopite machinable ceramics.

对氟金云母可加工陶进行车削加工试验,分析了切削中的损特性,讨论了影响损率的因素。

The brickmaking,smelting,china,filature, weaving and such handiworks had appeared early in the Ming Period.

早在明代就有制砖、冶坊、陶、缫丝、织布等手工业。

Some ceramic works of art are shown in this exhibition.

这次展览会上展出了一些陶品。

The features and applications in superprecision turnings of piezoelectric ceramic inching motion devices are introduced.

介绍了压电陶微动机构的性能特点及在超密车削加工中的多种用途。

The high-speed steel tool was not suitable for turning fluorophlogopite,and ceramics tool was ...

车削氟金云母陶对损过程与切削金属相似。

Piezoceramics telescopic micro-actuator was used in design of micro-gripper of robot.

机器人微操作手设计采用压电伸缩陶微位移器。

The worn surface morphology of ADZ ceramic was analyzed with a scanning electron microscope.

与去离子水相比,在小牛血清润滑条件下ADZ陶的摩擦因数和损率降低。

Porous ceramic materials on the base of strontium zirconate were developed with zirconium dioxide,baddeleyite powder,and granular polysterol.

采用二氧化锆、斜锆矿粉、碳酸锶及粒状聚苯乙烯制成了锆酸锶多孔陶材料。

Sinter type fastigiate-handle drills:Use for drilling hard and brickle material,...

简 介: 烧结锥柄钻头：适用于玻璃、陶等硬性材料的钻孔。

We specialize in producing and selling all kinds of top grade ormolu of decoration, European furniture and daily use.

公司主要生产和销售各式高档家居陈设陶、欧美系列家居及日用品。

Ultrafine zircon powder with high purity is a kind of brightening agent in glaze for making high-grade cleaning whiteware.

高纯超细锆英石粉是制造高档卫生洁陶所用釉料中的乳浊增白剂。

The effect of process parameters on the electric insulance of micro arc oxidated ceramic coat on aluminium plate is studied.

研究了工参数对铝微弧氧化陶层电绝缘性能的影响规律。

Cupping A treatment inducing local decongestion by a heated cup made of bamboo, porcelain or glass being placed on the body.

拔火罐是以竹筒、陶或玻璃制成的小罐，加热后吸附在身体表面，引起局部充血的一种治疗方法。

In this paper .bridge-indentation method is adopted to precrack in ceramic specimens, and the advantage as well as disadvantage are discussed.

本文首先对桥压法预制原生裂纹进行了研究,然后针对桥压法存在的问题提出了一种简便而有效的陶材料原生裂纹的预制方法——静态膨胀法。

In this process,microwave heating is used to make ceramic materials plastifying under a high temperature,so that a good machinability can be achieved.

该方法利用微波加热使陶材料在较高温度下塑性化,从而获得到较好的加工性。

To raise ozone output of ozonator,it demands that ceramic plate materials for ozonator have good dielectric properties and quite high thermal conductivity.

为了提高臭氧发生器的臭氧产量,要求臭氧发生器用的陶基板材料有较高的介电性能和热导率。

Writer discusses also the characteristic of silicon nitrid ceramic materials,and chooses this ceramic bearing used in the bottom of the reactor above.

论述了氮化硅陶材料的特点，选择了氮化硅陶轴承作为有机硅室温胶搅拌釜底轴承并进行了相应设计。

As a non-glazed type,boccaro ware achieves its visual effect from its form and structure rather than the decorations of glazed, colored drawing.

紫砂器是一种无釉陶，它并非以釉彩绘画的装饰来达到陶中美的效果，而是通过造型结构来表达其外观美。

The fabrication processing of unidirectional short carbon and Nicalon fiberreinforced LAS composites was investigated.

研究短纤维增强玻璃基复合材料制备工艺中的短纤维分散和单向纤维预浸片制备。

The ceramic plates of air valves against abration, corrosion, dust, dirt, and sand.

阀板耐磨、耐腐蚀、耐固体颗粒侵蚀，寿命长，适合各种气体、液体阀门的密封。

The characteristic and influencing factors of tools wear were analyzed through turning fluorophlogopite machinable ceramics.

对氟金云可加工进行车削加工试验,分析切削中的刀具磨损特性,讨论影响刀具磨损率的因素。

The brickmaking,smelting,china,filature, weaving and such handiworks had appeared early in the Ming Period.

早在明代就有制砖、冶坊、、缫丝、织布等手工业。

Some ceramic works of art are shown in this exhibition.

这次展览会上展出一些艺术品。

The features and applications in superprecision turnings of piezoelectric ceramic inching motion devices are introduced.

压电微动机构的性能特点及在超密车削加工中的多种用途。

The high-speed steel tool was not suitable for turning fluorophlogopite,and ceramics tool was ...

车削氟金云对刀具磨损过程与切削金属相似。

Piezoceramics telescopic micro-actuator was used in design of micro-gripper of robot.

机器人微操作手设计采用压电伸缩微位移器。

The worn surface morphology of ADZ ceramic was analyzed with a scanning electron microscope.

与去离子水相比,在小牛血清润滑条件下ADZ的摩擦因数和磨损率降低。

Porous ceramic materials on the base of strontium zirconate were developed with zirconium dioxide,baddeleyite powder,and granular polysterol.

采用二氧化锆、斜锆矿粉、碳酸锶及粒状聚苯乙烯制成锆酸锶多孔材料。

Sinter type fastigiate-handle drills:Use for drilling hard and brickle material,...

简 : 烧结锥柄钻头：适用于玻璃、等硬性材料的钻孔。

We specialize in producing and selling all kinds of top grade ormolu of decoration, European furniture and daily use.

公司主要生产和销售各式高档家居陈设、欧美系列家居及日用品。

Ultrafine zircon powder with high purity is a kind of brightening agent in glaze for making high-grade cleaning whiteware.

高纯超细锆英石粉是制造高档卫生洁具所用釉料中的乳浊增白剂。

The effect of process parameters on the electric insulance of micro arc oxidated ceramic coat on aluminium plate is studied.

研究工艺参数对铝微弧氧化层电绝缘性能的影响规律。

Cupping A treatment inducing local decongestion by a heated cup made of bamboo, porcelain or glass being placed on the body.

拔火罐是以竹筒、或玻璃制成的小罐，加热后吸附在身体表面，引起局部充血的一种治疗方法。

In this paper .bridge-indentation method is adopted to precrack in ceramic specimens, and the advantage as well as disadvantage are discussed.

本文首先对桥压法预制原生裂纹进行研究,然后针对桥压法存在的问题提出一种简便而有效的材料原生裂纹的预制方法——静态膨胀法。

In this process,microwave heating is used to make ceramic materials plastifying under a high temperature,so that a good machinability can be achieved.

该方法利用微波加热使材料在较高温度下塑性化,从而获得到较好的加工性。

To raise ozone output of ozonator,it demands that ceramic plate materials for ozonator have good dielectric properties and quite high thermal conductivity.

为提高臭氧发生器的臭氧产量,要求臭氧发生器用的基板材料具有较高的电性能和热导率。

Writer discusses also the characteristic of silicon nitrid ceramic materials,and chooses this ceramic bearing used in the bottom of the reactor above.

论述氮化硅材料的特点，选择氮化硅轴承作为有机硅室温胶搅拌釜底轴承并进行相应设计。

As a non-glazed type,boccaro ware achieves its visual effect from its form and structure rather than the decorations of glazed, colored drawing.

紫砂器是一种无釉，它并非以釉彩绘画的装饰来达到艺术中美的效果，而是通过造型结构来表达其外观美。

The fabrication processing of unidirectional short carbon and Nicalon fiberreinforced LAS composites was investigated.

研究了短纤维增强玻璃陶瓷基复合材料制备工艺中的短纤维分散和单向纤维预浸片制备。

The ceramic plates of air valves against abration, corrosion, dust, dirt, and sand.

陶瓷阀板耐磨、耐腐蚀、耐固体颗粒侵蚀，寿命长，适合各种气体、液体阀门的密封。

The characteristic and influencing factors of tools wear were analyzed through turning fluorophlogopite machinable ceramics.

对氟金云母可加工陶瓷进行车削加工试验,分析了切削中的刀具磨损特性,讨论了影响刀具磨损率的因素。

The brickmaking,smelting,china,filature, weaving and such handiworks had appeared early in the Ming Period.

早在明代就有制砖、冶坊、陶瓷、缫丝、手工业。

Some ceramic works of art are shown in this exhibition.

这次展览会上展出了一些陶瓷艺术品。

The features and applications in superprecision turnings of piezoelectric ceramic inching motion devices are introduced.

介绍了压电陶瓷微动机构的性能特点及在超密车削加工中的多种用途。

The high-speed steel tool was not suitable for turning fluorophlogopite,and ceramics tool was ...

车削氟金云母陶瓷对刀具磨损过程与切削金属相似。

Piezoceramics telescopic micro-actuator was used in design of micro-gripper of robot.

机器人微操手计采用压电伸缩陶瓷微位移器。

The worn surface morphology of ADZ ceramic was analyzed with a scanning electron microscope.

与去离子水相比,在小牛血清润滑条件下ADZ陶瓷的摩擦因数和磨损率降低。

Porous ceramic materials on the base of strontium zirconate were developed with zirconium dioxide,baddeleyite powder,and granular polysterol.

采用二氧化锆、斜锆矿粉、碳酸锶及粒状聚苯乙烯制成了锆酸锶多孔陶瓷材料。

Sinter type fastigiate-handle drills:Use for drilling hard and brickle material,...

简 介: 烧结锥柄钻头：适用于玻璃、陶瓷硬性材料的钻孔。

We specialize in producing and selling all kinds of top grade ormolu of decoration, European furniture and daily use.

公司主要生产和销售各式高档家居陈陶瓷、欧美系列家居及日用品。

Ultrafine zircon powder with high purity is a kind of brightening agent in glaze for making high-grade cleaning whiteware.

高纯超细锆英石粉是制造高档卫生洁具陶瓷所用釉料中的乳浊增白剂。

The effect of process parameters on the electric insulance of micro arc oxidated ceramic coat on aluminium plate is studied.

研究了工艺参数对铝微弧氧化陶瓷层电绝缘性能的影响规律。

Cupping A treatment inducing local decongestion by a heated cup made of bamboo, porcelain or glass being placed on the body.

拔火罐是以竹筒、陶瓷或玻璃制成的小罐，加热后吸附在身体表面，引起局部充血的一种治疗方法。

In this paper .bridge-indentation method is adopted to precrack in ceramic specimens, and the advantage as well as disadvantage are discussed.

本文首先对桥压法预制原生裂纹进行了研究,然后针对桥压法存在的问题提出了一种简便而有效的陶瓷材料原生裂纹的预制方法——静态膨胀法。

In this process,microwave heating is used to make ceramic materials plastifying under a high temperature,so that a good machinability can be achieved.

该方法利用微波加热使陶瓷材料在较高温度下塑性化,从而获得到较好的加工性。

To raise ozone output of ozonator,it demands that ceramic plate materials for ozonator have good dielectric properties and quite high thermal conductivity.

为了提高臭氧发生器的臭氧产量,要求臭氧发生器用的陶瓷基板材料具有较高的介电性能和热导率。

Writer discusses also the characteristic of silicon nitrid ceramic materials,and chooses this ceramic bearing used in the bottom of the reactor above.

论述了氮化硅陶瓷材料的特点，选择了氮化硅陶瓷轴承为有机硅室温胶搅拌釜底轴承并进行了相应计。

As a non-glazed type,boccaro ware achieves its visual effect from its form and structure rather than the decorations of glazed, colored drawing.

紫砂器是一种无釉陶，它并非以釉彩绘画的装饰来达到陶瓷艺术中美的效果，而是通过造型结构来表达其外观美。

The fabrication processing of unidirectional short carbon and Nicalon fiberreinforced LAS composites was investigated.

研究短纤维增强玻璃陶瓷基复合材料制备工艺中的短纤维分散单向纤维预浸片制备。

The ceramic plates of air valves against abration, corrosion, dust, dirt, and sand.

陶瓷阀板耐磨、耐腐蚀、耐固体颗粒侵蚀，寿命长，适合各种气体、液体阀门的密封。

The characteristic and influencing factors of tools wear were analyzed through turning fluorophlogopite machinable ceramics.

对氟金云母可加工陶瓷进行车加工试验,分析中的刀具磨损特性,讨论影响刀具磨损率的素。

The brickmaking,smelting,china,filature, weaving and such handiworks had appeared early in the Ming Period.

早在明代就有制砖、冶坊、陶瓷、缫丝、织布等手工业。

Some ceramic works of art are shown in this exhibition.

这次展览会上展出一些陶瓷艺术品。

The features and applications in superprecision turnings of piezoelectric ceramic inching motion devices are introduced.

介绍压电陶瓷微动机构的性能特点及在超密车加工中的多种用途。

The high-speed steel tool was not suitable for turning fluorophlogopite,and ceramics tool was ...

车氟金云母陶瓷对刀具磨损过程与金属相似。

Piezoceramics telescopic micro-actuator was used in design of micro-gripper of robot.

机器人微操作手设计采用压电伸缩陶瓷微位移器。

The worn surface morphology of ADZ ceramic was analyzed with a scanning electron microscope.

与去离子水相比,在小牛血清润滑条件下ADZ陶瓷的摩擦磨损率降低。

Porous ceramic materials on the base of strontium zirconate were developed with zirconium dioxide,baddeleyite powder,and granular polysterol.

采用二氧化锆、斜锆矿粉、碳酸锶及粒状聚苯乙烯制成锆酸锶多孔陶瓷材料。

Sinter type fastigiate-handle drills:Use for drilling hard and brickle material,...

简 介: 烧结锥柄钻头：适用于玻璃、陶瓷等硬性材料的钻孔。

We specialize in producing and selling all kinds of top grade ormolu of decoration, European furniture and daily use.

公司主要生产销售各式高档家居陈设陶瓷、欧美系列家居及日用品。

Ultrafine zircon powder with high purity is a kind of brightening agent in glaze for making high-grade cleaning whiteware.

高纯超细锆英石粉是制造高档卫生洁具陶瓷所用釉料中的乳浊增白剂。

The effect of process parameters on the electric insulance of micro arc oxidated ceramic coat on aluminium plate is studied.

研究工艺参对铝微弧氧化陶瓷层电绝缘性能的影响规律。

Cupping A treatment inducing local decongestion by a heated cup made of bamboo, porcelain or glass being placed on the body.

拔火罐是以竹筒、陶瓷或玻璃制成的小罐，加热后吸附在身体表面，引起局部充血的一种治疗方法。

In this paper .bridge-indentation method is adopted to precrack in ceramic specimens, and the advantage as well as disadvantage are discussed.

本文首先对桥压法预制原生裂纹进行研究,然后针对桥压法存在的问题提出一种简便而有效的陶瓷材料原生裂纹的预制方法——静态膨胀法。

In this process,microwave heating is used to make ceramic materials plastifying under a high temperature,so that a good machinability can be achieved.

该方法利用微波加热使陶瓷材料在较高温度下塑性化,从而获得到较好的加工性。

To raise ozone output of ozonator,it demands that ceramic plate materials for ozonator have good dielectric properties and quite high thermal conductivity.

为提高臭氧发生器的臭氧产量,要求臭氧发生器用的陶瓷基板材料具有较高的介电性能热导率。

Writer discusses also the characteristic of silicon nitrid ceramic materials,and chooses this ceramic bearing used in the bottom of the reactor above.

论述氮化硅陶瓷材料的特点，选择氮化硅陶瓷轴承作为有机硅室温胶搅拌釜底轴承并进行相应设计。

As a non-glazed type,boccaro ware achieves its visual effect from its form and structure rather than the decorations of glazed, colored drawing.

紫砂器是一种无釉陶，它并非以釉彩绘画的装饰来达到陶瓷艺术中美的效果，而是通过造型结构来表达其外观美。

The fabrication processing of unidirectional short carbon and Nicalon fiberreinforced LAS composites was investigated.

研究了短纤维增强玻璃基复合材料制备工艺中的短纤维分散和单向纤维预浸片制备。

The ceramic plates of air valves against abration, corrosion, dust, dirt, and sand.

阀板耐磨、耐腐蚀、耐固体颗粒侵蚀，寿命长，适合各种气体、液体阀门的密封。

The characteristic and influencing factors of tools wear were analyzed through turning fluorophlogopite machinable ceramics.

对氟金云母可加工进行车削加工试验,分析了切削中的刀具磨损特性,讨论了影响刀具磨损率的因素。

The brickmaking,smelting,china,filature, weaving and such handiworks had appeared early in the Ming Period.

早在明代就有制砖、冶、、缫丝、织布等手工业。

Some ceramic works of art are shown in this exhibition.

这次展览会上展出了一些艺术品。

The features and applications in superprecision turnings of piezoelectric ceramic inching motion devices are introduced.

介绍了微动机构的性能特点及在超密车削加工中的多种途。

The high-speed steel tool was not suitable for turning fluorophlogopite,and ceramics tool was ...

车削氟金云母对刀具磨损过程与切削金属相似。

Piezoceramics telescopic micro-actuator was used in design of micro-gripper of robot.

机器人微操作手设计采伸缩微位移器。

The worn surface morphology of ADZ ceramic was analyzed with a scanning electron microscope.

与去离子水相比,在小牛血清润滑条件下ADZ的摩擦因数和磨损率降低。

Porous ceramic materials on the base of strontium zirconate were developed with zirconium dioxide,baddeleyite powder,and granular polysterol.

采二氧化锆、斜锆矿粉、碳酸锶及粒状聚苯乙烯制成了锆酸锶多孔材料。

Sinter type fastigiate-handle drills:Use for drilling hard and brickle material,...

简 介: 烧结锥柄钻头：适于玻璃、等硬性材料的钻孔。

We specialize in producing and selling all kinds of top grade ormolu of decoration, European furniture and daily use.

公司主要生产和销售各式高档家居陈设、欧美系列家居及日品。

Ultrafine zircon powder with high purity is a kind of brightening agent in glaze for making high-grade cleaning whiteware.

高纯超细锆英石粉是制造高档卫生洁具所釉料中的乳浊增白剂。

The effect of process parameters on the electric insulance of micro arc oxidated ceramic coat on aluminium plate is studied.

研究了工艺参数对铝微弧氧化层绝缘性能的影响规律。

Cupping A treatment inducing local decongestion by a heated cup made of bamboo, porcelain or glass being placed on the body.

拔火罐是以竹筒、或玻璃制成的小罐，加热后吸附在身体表面，引起局部充血的一种治疗方法。

In this paper .bridge-indentation method is adopted to precrack in ceramic specimens, and the advantage as well as disadvantage are discussed.

本文首先对桥法预制原生裂纹进行了研究,然后针对桥法存在的问题提出了一种简便而有效的材料原生裂纹的预制方法——静态膨胀法。

In this process,microwave heating is used to make ceramic materials plastifying under a high temperature,so that a good machinability can be achieved.

该方法利微波加热使材料在较高温度下塑性化,从而获得到较好的加工性。

To raise ozone output of ozonator,it demands that ceramic plate materials for ozonator have good dielectric properties and quite high thermal conductivity.

为了提高臭氧发生器的臭氧产量,要求臭氧发生器的基板材料具有较高的介性能和热导率。

Writer discusses also the characteristic of silicon nitrid ceramic materials,and chooses this ceramic bearing used in the bottom of the reactor above.

论述了氮化硅材料的特点，选择了氮化硅轴承作为有机硅室温胶搅拌釜底轴承并进行了相应设计。

As a non-glazed type,boccaro ware achieves its visual effect from its form and structure rather than the decorations of glazed, colored drawing.

紫砂器是一种无釉，它并非以釉彩绘画的装饰来达到艺术中美的效果，而是通过造型结构来表达其外观美。