Cast iron cannot compare with steel in strength.

铸铁在强度方面比不上钢。

Tell the foundry to cast another piston.

告诉铸铁间再铸一只。

The deformative charateristics of cementite of white cast iron during the rolling process was investigated.

究了惨碳体在白口铸铁轧制变形过程中变化特点。

The columnar zone of HCrCI was found by unidirection solidification formed by chill.

采用加冷铁方法可使高铬铸铁件定向凝固形成柱状晶。

Socket clevies is forgeable iron,hot galvanizing.Spring catch bronze or stainless steel.

碗头挂板为可锻铸铁件，热镀锌。弹簧销为青件或不锈钢件。

For processing the high tensile metals:carbon stell common alloy stell,hard bronze forgeable castiron.etc.

加工高抗张强度金属:碳素钢、硬青和可锻铸铁等。

The developed dual phase cast steel is applicable as scaleboard materials in a middle or smaller type of ball mill.

在给定低铬铸铁下试样条件下,当冲击载荷较小时,铸态复相耐磨钢具有良好冲击耐磨性。

The relationship between basicity of graphitiferous slag and microstructurcs of both slag and weld metal arc investigated for the same electrode with cast iron.

本文通过计算石墨型熔渣碱度,究了钢芯同质铸铁焊条熔渣碱度与熔渣微观结构和焊缝组织。

The nodulizing power of the La-Mg nodulizer and its influences on the chilling sensitivity of nodular cast iron and the property of anti-degeneration were studied.

究了镧镁球化剂球化能力及其对球墨铸铁白口敏感性和抗衰退性影响。

This paper has described the new process combined with the modification, inoculation and micro-alloyage technology in the manufacturing of high quality high-Cr white cast iron.

介绍将变质处理、孕育处理和微合金化技术结合使用于优质高铬白口铸铁生产新工艺。

When melting cast iron f or rollers in main frequency induction furnace,the recarburization of the molte n iron could be effectively achieved by using new types of recarburizer.

用工频电炉熔炼铸铁轧辊时,采用新型增碳剂可以有效地解决铁液增碳问题。

By observation and analysis of the test data, changing the plate steel endshield of motor into the disc iron one can improve the rigidness of endshield, and reduce the axial vibration of motor.

通过观察和检测数据分析,电动机平板式钢板端盖改为盘式铸铁端盖,可提高端盖刚度,降低电机轴向振动。

Cast iron cannot compare with steel in strength.

铸铁在强度方面比不上钢。

Tell the foundry to cast another piston.

告诉铸铁间再铸一只活塞。

The deformative charateristics of cementite of white cast iron during the rolling process was investigated.

研究了惨碳体在白口铸铁轧制变形过程中变化特点。

The columnar zone of HCrCI was found by unidirection solidification formed by chill.

采用加冷铁方法可使高铬铸铁件定向凝固形成柱状。

Socket clevies is forgeable iron,hot galvanizing.Spring catch bronze or stainless steel.

挂板为可锻铸铁件，热镀锌。弹簧销为青件或不锈钢件。

For processing the high tensile metals:carbon stell common alloy stell,hard bronze forgeable castiron.etc.

加工高抗张强度金属:碳素钢、硬青和可锻铸铁等。

The developed dual phase cast steel is applicable as scaleboard materials in a middle or smaller type of ball mill.

在给定低铬铸铁下试样条件下,当击载荷较小时,铸态复相耐磨钢具有良击耐磨性。

The relationship between basicity of graphitiferous slag and microstructurcs of both slag and weld metal arc investigated for the same electrode with cast iron.

本文通过计算石墨型熔渣碱度,研究了钢芯同质铸铁焊条熔渣碱度与熔渣微观结构和焊缝组织关系。

The nodulizing power of the La-Mg nodulizer and its influences on the chilling sensitivity of nodular cast iron and the property of anti-degeneration were studied.

研究了镧镁球化剂球化能力及其对球墨铸铁白口敏感性和抗衰退性影响。

This paper has described the new process combined with the modification, inoculation and micro-alloyage technology in the manufacturing of high quality high-Cr white cast iron.

介绍将变质处理、孕育处理和微合金化技术结合使用于优质高铬白口铸铁生产新工艺。

When melting cast iron f or rollers in main frequency induction furnace,the recarburization of the molte n iron could be effectively achieved by using new types of recarburizer.

用工频电炉熔炼铸铁轧辊时,采用新型增碳剂可以有效地解决铁液增碳问题。

By observation and analysis of the test data, changing the plate steel endshield of motor into the disc iron one can improve the rigidness of endshield, and reduce the axial vibration of motor.

通过观察和检测数据分析,电动机平板式钢板端盖改为盘式铸铁端盖,可提高端盖刚度,降低电机轴向振动。

Cast iron cannot compare with steel in strength.

铸铁在强度方面比不上钢。

Tell the foundry to cast another piston.

告诉铸铁间再铸一只活塞。

The deformative charateristics of cementite of white cast iron during the rolling process was investigated.

研究了惨碳体在铸铁轧制变形过程中的变化特点。

The columnar zone of HCrCI was found by unidirection solidification formed by chill.

采用加冷铁的方法可使高铬铸铁件定向凝固形成柱状晶。

Socket clevies is forgeable iron,hot galvanizing.Spring catch bronze or stainless steel.

碗头挂板为可锻铸铁件，热镀锌。弹簧销为青件或不锈钢件。

For processing the high tensile metals:carbon stell common alloy stell,hard bronze forgeable castiron.etc.

加工高抗张强度的金属:碳素钢、硬青和可锻铸铁等。

The developed dual phase cast steel is applicable as scaleboard materials in a middle or smaller type of ball mill.

在给定的低铬铸铁下试样条件下,当冲击载荷较小时,铸态复相耐磨钢具有良好的冲击耐磨性。

The relationship between basicity of graphitiferous slag and microstructurcs of both slag and weld metal arc investigated for the same electrode with cast iron.

本文通过计算石墨型熔渣碱度,研究了钢芯同质铸铁焊条熔渣的碱度与熔渣微观结构和焊缝组织的关系。

The nodulizing power of the La-Mg nodulizer and its influences on the chilling sensitivity of nodular cast iron and the property of anti-degeneration were studied.

研究了镧镁球化剂的球化能力及其对球墨铸铁感性和抗衰退性的影响。

This paper has described the new process combined with the modification, inoculation and micro-alloyage technology in the manufacturing of high quality high-Cr white cast iron.

介绍将变质处理、孕育处理和微合金化技术结合使用于优质高铬铸铁生产的新工艺。

When melting cast iron f or rollers in main frequency induction furnace,the recarburization of the molte n iron could be effectively achieved by using new types of recarburizer.

用工频电炉熔炼铸铁轧辊时,采用新型增碳剂可以有效地解决铁液的增碳问题。

By observation and analysis of the test data, changing the plate steel endshield of motor into the disc iron one can improve the rigidness of endshield, and reduce the axial vibration of motor.

通过观察和检测数据分析,电动机的平板式钢板端盖改为盘式铸铁端盖,可提高端盖刚度,降低电机轴向振动。

Cast iron cannot compare with steel in strength.

铸铁在强度方上钢。

Tell the foundry to cast another piston.

告诉铸铁间再铸一只活塞。

The deformative charateristics of cementite of white cast iron during the rolling process was investigated.

研究了惨碳体在白口铸铁轧制变形过程中的变化特点。

The columnar zone of HCrCI was found by unidirection solidification formed by chill.

采用加冷铁的方法可使高铬铸铁件定向凝固形成柱状晶。

Socket clevies is forgeable iron,hot galvanizing.Spring catch bronze or stainless steel.

碗头挂板为可锻铸铁件，热镀锌。弹簧销为青件或锈钢件。

For processing the high tensile metals:carbon stell common alloy stell,hard bronze forgeable castiron.etc.

加工高抗张强度的金属:碳素钢、硬青和可锻铸铁等。

The developed dual phase cast steel is applicable as scaleboard materials in a middle or smaller type of ball mill.

在给定的低铬铸铁下试样条件下,当冲击载荷较小时,铸态复相耐磨钢具有良好的冲击耐磨性。

The relationship between basicity of graphitiferous slag and microstructurcs of both slag and weld metal arc investigated for the same electrode with cast iron.

本文通过计算石墨型熔渣碱度,研究了钢芯同质铸铁焊条熔渣的碱度与熔渣微观结构和焊缝组织的关系。

The nodulizing power of the La-Mg nodulizer and its influences on the chilling sensitivity of nodular cast iron and the property of anti-degeneration were studied.

研究了镧镁球化剂的球化其对球墨铸铁白口敏感性和抗衰退性的影响。

This paper has described the new process combined with the modification, inoculation and micro-alloyage technology in the manufacturing of high quality high-Cr white cast iron.

介绍将变质处理、孕育处理和微合金化技术结合使用于优质高铬白口铸铁生产的新工艺。

When melting cast iron f or rollers in main frequency induction furnace,the recarburization of the molte n iron could be effectively achieved by using new types of recarburizer.

用工频电炉熔炼铸铁轧辊时,采用新型增碳剂可以有效地解决铁液的增碳问题。

By observation and analysis of the test data, changing the plate steel endshield of motor into the disc iron one can improve the rigidness of endshield, and reduce the axial vibration of motor.

通过观察和检测数据分析,电动机的平板式钢板端盖改为盘式铸铁端盖,可提高端盖刚度,降低电机轴向振动。

Cast iron cannot compare with steel in strength.

铸在强度方面比不上钢。

Tell the foundry to cast another piston.

告诉铸间再铸一只活塞。

The deformative charateristics of cementite of white cast iron during the rolling process was investigated.

研究了惨碳体在白口铸轧制形过程中特点。

The columnar zone of HCrCI was found by unidirection solidification formed by chill.

采用加冷方法可使高铬铸件定向凝固形成柱状晶。

Socket clevies is forgeable iron,hot galvanizing.Spring catch bronze or stainless steel.

碗头挂板为可锻铸件，热镀锌。弹簧销为青件或不锈钢件。

For processing the high tensile metals:carbon stell common alloy stell,hard bronze forgeable castiron.etc.

加工高抗张强度金属:碳素钢、硬青和可锻铸等。

The developed dual phase cast steel is applicable as scaleboard materials in a middle or smaller type of ball mill.

在给定低铬铸下试样件下,当冲击载荷较小时,铸态复相耐磨钢具有良好冲击耐磨性。

The relationship between basicity of graphitiferous slag and microstructurcs of both slag and weld metal arc investigated for the same electrode with cast iron.

本文通过计算石墨型熔渣碱度,研究了钢芯同质铸熔渣碱度与熔渣微观结构和缝组织关系。

The nodulizing power of the La-Mg nodulizer and its influences on the chilling sensitivity of nodular cast iron and the property of anti-degeneration were studied.

研究了镧镁球剂球能力及其对球墨铸白口敏感性和抗衰退性影响。

This paper has described the new process combined with the modification, inoculation and micro-alloyage technology in the manufacturing of high quality high-Cr white cast iron.

介绍将质处理、孕育处理和微合金技术结合使用于优质高铬白口铸生产新工艺。

When melting cast iron f or rollers in main frequency induction furnace,the recarburization of the molte n iron could be effectively achieved by using new types of recarburizer.

用工频电炉熔炼铸轧辊时,采用新型增碳剂可以有效地解决液增碳问题。

By observation and analysis of the test data, changing the plate steel endshield of motor into the disc iron one can improve the rigidness of endshield, and reduce the axial vibration of motor.

通过观察和检测数据分析,电动机平板式钢板端盖改为盘式铸端盖,可提高端盖刚度,降低电机轴向振动。

Cast iron cannot compare with steel in strength.

铸铁在强度方面比不上钢。

Tell the foundry to cast another piston.

告诉铸铁间再铸一只活塞。

The deformative charateristics of cementite of white cast iron during the rolling process was investigated.

研究了惨碳体在白口铸铁轧制变形过程中的变化特点。

The columnar zone of HCrCI was found by unidirection solidification formed by chill.

采用加冷铁的方法可使高铬铸铁件定向凝固形成柱状晶。

Socket clevies is forgeable iron,hot galvanizing.Spring catch bronze or stainless steel.

碗头挂板为可锻铸铁件，热镀锌。弹簧销为青件或不锈钢件。

For processing the high tensile metals:carbon stell common alloy stell,hard bronze forgeable castiron.etc.

加工高张强度的金属:碳素钢、硬青可锻铸铁等。

The developed dual phase cast steel is applicable as scaleboard materials in a middle or smaller type of ball mill.

在给定的低铬铸铁下试样条件下,当冲击载荷较小时,铸态复相耐磨钢具有良好的冲击耐磨性。

The relationship between basicity of graphitiferous slag and microstructurcs of both slag and weld metal arc investigated for the same electrode with cast iron.

本文通过计算石墨型熔渣碱度,研究了钢芯同质铸铁焊条熔渣的碱度与熔渣微观结构焊缝组织的关系。

The nodulizing power of the La-Mg nodulizer and its influences on the chilling sensitivity of nodular cast iron and the property of anti-degeneration were studied.

研究了镧镁球化剂的球化能力及其对球墨铸铁白口敏感性退性的影响。

This paper has described the new process combined with the modification, inoculation and micro-alloyage technology in the manufacturing of high quality high-Cr white cast iron.

介绍将变质处理、孕育处理微合金化技术结合使用于优质高铬白口铸铁生产的新工艺。

When melting cast iron f or rollers in main frequency induction furnace,the recarburization of the molte n iron could be effectively achieved by using new types of recarburizer.

用工频电炉熔炼铸铁轧辊时,采用新型增碳剂可以有效地解决铁液的增碳问题。

By observation and analysis of the test data, changing the plate steel endshield of motor into the disc iron one can improve the rigidness of endshield, and reduce the axial vibration of motor.

通过观察检测数据分析,电动机的平板式钢板端盖改为盘式铸铁端盖,可提高端盖刚度,降低电机轴向振动。

Cast iron cannot compare with steel in strength.

铸铁在强度方面比不上钢。

Tell the foundry to cast another piston.

告诉铸铁间再铸一只活塞。

The deformative charateristics of cementite of white cast iron during the rolling process was investigated.

研究了惨碳体在白口铸铁轧制变过程中的变化特点。

The columnar zone of HCrCI was found by unidirection solidification formed by chill.

采用加冷铁的方法可使高铬铸铁件定向成柱状晶。

Socket clevies is forgeable iron,hot galvanizing.Spring catch bronze or stainless steel.

碗头挂板为可锻铸铁件，热镀锌。弹簧销为青件或不锈钢件。

For processing the high tensile metals:carbon stell common alloy stell,hard bronze forgeable castiron.etc.

加工高抗张强度的金属:碳素钢、硬青和可锻铸铁等。

The developed dual phase cast steel is applicable as scaleboard materials in a middle or smaller type of ball mill.

在给定的低铬铸铁下试样条件下,当冲击载荷较小时,铸态复相耐磨钢具有良好的冲击耐磨。

The relationship between basicity of graphitiferous slag and microstructurcs of both slag and weld metal arc investigated for the same electrode with cast iron.

通过计算石墨型熔渣碱度,研究了钢芯同质铸铁焊条熔渣的碱度与熔渣微观结构和焊缝组织的关系。

The nodulizing power of the La-Mg nodulizer and its influences on the chilling sensitivity of nodular cast iron and the property of anti-degeneration were studied.

研究了镧镁球化剂的球化能力及其对球墨铸铁白口敏感和抗衰退的影响。

This paper has described the new process combined with the modification, inoculation and micro-alloyage technology in the manufacturing of high quality high-Cr white cast iron.

介绍将变质处理、孕育处理和微合金化技术结合使用于优质高铬白口铸铁生产的新工艺。

When melting cast iron f or rollers in main frequency induction furnace,the recarburization of the molte n iron could be effectively achieved by using new types of recarburizer.

用工频电炉熔炼铸铁轧辊时,采用新型增碳剂可以有效地解决铁液的增碳问题。

By observation and analysis of the test data, changing the plate steel endshield of motor into the disc iron one can improve the rigidness of endshield, and reduce the axial vibration of motor.

通过观察和检测数据分析,电动机的平板式钢板端盖改为盘式铸铁端盖,可提高端盖刚度,降低电机轴向振动。

Cast iron cannot compare with steel in strength.

在强度方面比不上钢。

Tell the foundry to cast another piston.

告诉间再一只活塞。

The deformative charateristics of cementite of white cast iron during the rolling process was investigated.

研究了惨碳体在白口轧制变形过程中的变。

The columnar zone of HCrCI was found by unidirection solidification formed by chill.

采用加冷的方法可使高铬件定向凝固形成柱状晶。

Socket clevies is forgeable iron,hot galvanizing.Spring catch bronze or stainless steel.

碗头挂板为可锻件，热镀锌。弹簧销为青件或不锈钢件。

For processing the high tensile metals:carbon stell common alloy stell,hard bronze forgeable castiron.etc.

加工高抗张强度的金属:碳素钢、硬青和可锻等。

The developed dual phase cast steel is applicable as scaleboard materials in a middle or smaller type of ball mill.

在给定的低铬下试样条件下,当冲击载荷较小时,态复相耐磨钢具有良好的冲击耐磨性。

The relationship between basicity of graphitiferous slag and microstructurcs of both slag and weld metal arc investigated for the same electrode with cast iron.

本文通过计算石墨型熔渣碱度,研究了钢芯同焊条熔渣的碱度与熔渣微观结构和焊缝组织的关系。

The nodulizing power of the La-Mg nodulizer and its influences on the chilling sensitivity of nodular cast iron and the property of anti-degeneration were studied.

研究了镧镁球剂的球能力及其对球墨白口敏感性和抗衰退性的影响。

This paper has described the new process combined with the modification, inoculation and micro-alloyage technology in the manufacturing of high quality high-Cr white cast iron.

介绍将变处理、孕育处理和微合金技术结合使用于优高铬白口生产的新工艺。

When melting cast iron f or rollers in main frequency induction furnace,the recarburization of the molte n iron could be effectively achieved by using new types of recarburizer.

用工频电炉熔炼轧辊时,采用新型增碳剂可以有效地解决液的增碳问题。

By observation and analysis of the test data, changing the plate steel endshield of motor into the disc iron one can improve the rigidness of endshield, and reduce the axial vibration of motor.

通过观察和检测数据分析,电动机的平板式钢板端盖改为盘式端盖,可提高端盖刚度,降低电机轴向振动。

Cast iron cannot compare with steel in strength.

铸铁在强方面比不上钢。

Tell the foundry to cast another piston.

告诉铸铁间再铸一只活塞。

The deformative charateristics of cementite of white cast iron during the rolling process was investigated.

研究了惨碳体在白口铸铁轧过程中的化特点。

The columnar zone of HCrCI was found by unidirection solidification formed by chill.

采用加冷铁的方法可使高铬铸铁件定向凝固成柱状晶。

Socket clevies is forgeable iron,hot galvanizing.Spring catch bronze or stainless steel.

碗头挂板为可锻铸铁件，热镀锌。弹簧销为青件或不锈钢件。

For processing the high tensile metals:carbon stell common alloy stell,hard bronze forgeable castiron.etc.

加工高抗张强的金属:碳素钢、硬青和可锻铸铁等。

The developed dual phase cast steel is applicable as scaleboard materials in a middle or smaller type of ball mill.

在给定的低铬铸铁下试样条件下,当冲击载荷较小时,铸态复相耐磨钢具有良好的冲击耐磨性。

The relationship between basicity of graphitiferous slag and microstructurcs of both slag and weld metal arc investigated for the same electrode with cast iron.

本文通过计算石墨型熔渣,研究了钢芯同质铸铁焊条熔渣的熔渣微观结构和焊缝组织的关系。

The nodulizing power of the La-Mg nodulizer and its influences on the chilling sensitivity of nodular cast iron and the property of anti-degeneration were studied.

研究了镧镁球化剂的球化能力及其对球墨铸铁白口敏感性和抗衰退性的影响。

This paper has described the new process combined with the modification, inoculation and micro-alloyage technology in the manufacturing of high quality high-Cr white cast iron.

介绍将质处理、孕育处理和微合金化技术结合使用于优质高铬白口铸铁生产的新工艺。

When melting cast iron f or rollers in main frequency induction furnace,the recarburization of the molte n iron could be effectively achieved by using new types of recarburizer.

用工频电炉熔炼铸铁轧辊时,采用新型增碳剂可以有效地解决铁液的增碳问题。

By observation and analysis of the test data, changing the plate steel endshield of motor into the disc iron one can improve the rigidness of endshield, and reduce the axial vibration of motor.

通过观察和检测数据分析,电动机的平板式钢板端盖改为盘式铸铁端盖,可提高端盖刚,降低电机轴向振动。

Cast iron cannot compare with steel in strength.

铸铁在强度方面比不上。

Tell the foundry to cast another piston.

告诉铸铁间再铸一只活塞。

The deformative charateristics of cementite of white cast iron during the rolling process was investigated.

研究了惨碳体在白口铸铁轧制变形过程中的变化特点。

The columnar zone of HCrCI was found by unidirection solidification formed by chill.

冷铁的方法可使高铬铸铁件定向凝固形成柱状晶。

Socket clevies is forgeable iron,hot galvanizing.Spring catch bronze or stainless steel.

碗头挂板为可锻铸铁件，热镀锌。弹簧销为青件或不锈件。

For processing the high tensile metals:carbon stell common alloy stell,hard bronze forgeable castiron.etc.

工高抗张强度的金属:碳素、硬青和可锻铸铁等。

The developed dual phase cast steel is applicable as scaleboard materials in a middle or smaller type of ball mill.

在给定的低铬铸铁下试样条件下,当冲击载荷较小时,铸态复相耐磨具有良好的冲击耐磨性。

The relationship between basicity of graphitiferous slag and microstructurcs of both slag and weld metal arc investigated for the same electrode with cast iron.

本文通过计算石墨型熔渣碱度,研究了质铸铁焊条熔渣的碱度与熔渣微观结构和焊缝组织的关系。

The nodulizing power of the La-Mg nodulizer and its influences on the chilling sensitivity of nodular cast iron and the property of anti-degeneration were studied.

研究了镧镁球化剂的球化能力及其对球墨铸铁白口敏感性和抗衰退性的影响。

This paper has described the new process combined with the modification, inoculation and micro-alloyage technology in the manufacturing of high quality high-Cr white cast iron.

介绍将变质处理、孕育处理和微合金化技术结合使于优质高铬白口铸铁生产的新工艺。

When melting cast iron f or rollers in main frequency induction furnace,the recarburization of the molte n iron could be effectively achieved by using new types of recarburizer.

工频电炉熔炼铸铁轧辊时,新型增碳剂可以有效地解决铁液的增碳问题。

By observation and analysis of the test data, changing the plate steel endshield of motor into the disc iron one can improve the rigidness of endshield, and reduce the axial vibration of motor.

通过观察和检测数据分析,电动机的平板式板端盖改为盘式铸铁端盖,可提高端盖刚度,降低电机轴向振动。