The camshaft rotates in phase with the crankshaft, but at half its speed.

凸轮轴曲轴协调旋转, 但速度仅是曲轴的一半。

The main products are as follows, exhaust manifold, bent axle, camshaft, rubbing sassafras nestification, gearbox, support, flywheel, etc.

排气歧管、曲轴、凸轮轴、摩擦嵌套、变速箱、支架、飞轮等。

The failure of a gear shaft was analyzed by SEM analysis, macrograph, metallographical examination, mechanical test, chemical analysis and etc.

用扫描电镜、低倍、金相、力学化学分析等方法，分析了人字齿轮轴发生劈裂的原因。

The camshaft rotates in phase with the crankshaft, but at half its speed.

轮和协调旋转, 但速度仅是的一半。

The main products are as follows, exhaust manifold, bent axle, camshaft, rubbing sassafras nestification, gearbox, support, flywheel, etc.

排气歧管、、轮、摩擦嵌套、变速箱、支架、飞轮等。

The failure of a gear shaft was analyzed by SEM analysis, macrograph, metallographical examination, mechanical test, chemical analysis and etc.

摘要采用扫描电镜、低倍验、金相验、力学试验和化学分析等方法，分析了人字齿轮劈裂的原因。

The camshaft rotates in phase with the crankshaft, but at half its speed.

凸轮轴和曲轴协调旋转, 但速度仅是曲轴的一半。

The main products are as follows, exhaust manifold, bent axle, camshaft, rubbing sassafras nestification, gearbox, support, flywheel, etc.

排气歧管、曲轴、凸轮轴、摩擦嵌套、变速箱、支架、飞轮等。

The failure of a gear shaft was analyzed by SEM analysis, macrograph, metallographical examination, mechanical test, chemical analysis and etc.

摘要采用扫描、倍验、验、力学试验和化学分析等方法，分析了人字齿轮轴发生劈裂的原因。

The camshaft rotates in phase with the crankshaft, but at half its speed.

凸轮和曲旋转, 但速度仅是曲的一半。

The main products are as follows, exhaust manifold, bent axle, camshaft, rubbing sassafras nestification, gearbox, support, flywheel, etc.

排气歧管、曲、凸轮、摩擦嵌套、变速箱、支架、飞轮等。

The failure of a gear shaft was analyzed by SEM analysis, macrograph, metallographical examination, mechanical test, chemical analysis and etc.

摘要采用扫描电镜、低倍验、金相验、力学试验和化学分析等方法，分析了人字齿轮发生劈裂的原因。

The camshaft rotates in phase with the crankshaft, but at half its speed.

凸轮和调旋转, 但速度仅是的一半。

The main products are as follows, exhaust manifold, bent axle, camshaft, rubbing sassafras nestification, gearbox, support, flywheel, etc.

排气歧管、、凸轮、摩擦嵌套、变速箱、支架、飞轮等。

The failure of a gear shaft was analyzed by SEM analysis, macrograph, metallographical examination, mechanical test, chemical analysis and etc.

摘要采用扫描电镜、低倍验、金相验、力学试验和化学分析等方法，分析了人字齿轮发生劈裂的原因。

The camshaft rotates in phase with the crankshaft, but at half its speed.

凸轮轴和曲轴协调旋转, 但速度仅是曲轴的一半。

The main products are as follows, exhaust manifold, bent axle, camshaft, rubbing sassafras nestification, gearbox, support, flywheel, etc.

排气歧管、曲轴、凸轮轴、摩擦嵌套、变速箱、支架、飞轮等。

The failure of a gear shaft was analyzed by SEM analysis, macrograph, metallographical examination, mechanical test, chemical analysis and etc.

摘要采用扫描电镜、低倍验、金相验、力学试验和化学析等方法，析了人字齿轮轴发生劈裂的原因。

The camshaft rotates in phase with the crankshaft, but at half its speed.

凸轮轴和曲轴协调旋转, 但速度仅是曲轴的一半。

The main products are as follows, exhaust manifold, bent axle, camshaft, rubbing sassafras nestification, gearbox, support, flywheel, etc.

排气歧管、曲轴、凸轮轴、摩擦嵌套、变速箱、支架、飞轮等。

The failure of a gear shaft was analyzed by SEM analysis, macrograph, metallographical examination, mechanical test, chemical analysis and etc.

摘要采电镜、低倍、金相、试和化分析等方法，分析了人字齿轮轴发生劈裂的原因。

The camshaft rotates in phase with the crankshaft, but at half its speed.

凸轮轴和曲轴协调旋转, 但速度仅是曲轴的一半。

The main products are as follows, exhaust manifold, bent axle, camshaft, rubbing sassafras nestification, gearbox, support, flywheel, etc.

排气歧管、曲轴、凸轮轴、摩擦嵌套、变速箱、支架、飞轮等。

The failure of a gear shaft was analyzed by SEM analysis, macrograph, metallographical examination, mechanical test, chemical analysis and etc.

摘要采用扫描电镜、低倍验、金相验、力学试验和化学分析等方法，分析了字齿轮轴发生劈裂的原因。

The camshaft rotates in phase with the crankshaft, but at half its speed.

凸轮轴和曲轴协调旋转, 但速度仅是曲轴的一半。

The main products are as follows, exhaust manifold, bent axle, camshaft, rubbing sassafras nestification, gearbox, support, flywheel, etc.

排气歧管、曲轴、凸轮轴、摩擦嵌套、变速箱、支架、飞轮等。

The failure of a gear shaft was analyzed by SEM analysis, macrograph, metallographical examination, mechanical test, chemical analysis and etc.

摘要采用扫描电镜、低倍验、金相验、力学试验和化学分析等方法，分析了人字齿轮轴发生劈裂的原因。