Trilobal polycarbosilane(PCS) fibers were prepared by melt spinning PCS precursor through Y-shaped spinnerret.

以聚碳硅烷（PCS）为原料，经不熔化和烧成制得三叶型碳化硅纤维。

Rare earth can influence for shape size,distribution and quantity of niobium carbonide,decrease activity of carbon and niobium i...

稀土对碳化铌形态、大小、分布、数量有影响,可降低碳、铌活度,阻碍碳化铌在奥氏体区析出。

Thermoresistant saggers containing silicon carbide and granular filler were produced through slip casting in plaster mould.

用石膏模浇注法生产出了含碳化硅和粒状填料耐热匣钵。

This paper describes the cutting test of hard alloy tip produced by using the new carbusintering technique.

对采用烧结碳化新工艺制取合金刀片进行了切削试验。

"aragonite: an orthorhombic mineral form of crystalline calcium carbonate, dimorphous with calcite."

文石结晶富钙碳化物一种正交晶矿物,具有方解石两种晶态。

The carbonization of exrtacting constituents of preheated Shenfu noncoking and Liulin dominant coking coal has been studied.

对预热神木不粘煤及柳林主煤中不同溶剂抽提组分碳化特性分别进行了比较研究。

"carburize:To treat, combine, or impregnate with carbon, as when casehardening steel."

使渗碳,碳化:使与碳一起处理,使与碳混合或使充满碳,如将钢火化.

Solo, free of the carbonite and suffering blindness from hibernation sickness, wildly swung a vibro-ax into an inattentive Fett's rocketpack.

韩在被碳化过后承受失明和冬眠症状，大力挥舞一只震动斧时意外敲进波巴喷射背包。

As the isocyan group is polymerized further, diphenyl carbondiimine may be formed, further polymerization of which forms a nitrogen-containing polycyclic aromatic compound.

异氰基化合物进一步二聚成二苯基碳化二亚胺，后者又聚合生成含氮杂环多环芳烃。

The benzene ring and alkene structural group are much more stable than structural group of sulfoacid for the carbonifying process of polystyrene.

在碳化过程中，聚苯乙烯阳离子交换树脂苯环结构和烯烃基团比磺酸基团稳定。

Although PM has solved the problem of carbide segregation and crassitude fundamentally, it has complicated technics and extortionate cost, so restricts its application.

粉末冶金虽然从根本上解决了碳化物偏析和粗大问题，但其工艺复杂，成本过高，应用受到限制。

Transformation mechanism of carbides and their effect on the stress rupture property were investigated in a Ni-base single crystal superalloy with microcontent of carbon.

研究了一种含微量(0.015%)碳镍基单晶高温合金在热处理和持久过程中碳化物演化机制以及各种碳化物对合金持久性能影响。

The crack initiates at stress concentration point in the root of weld, where has much more martenite, carbide and inclusion, and the serious hydrogen segregation.

裂纹均在焊缝根部应力集中处萌生，该处马氏体含量比较大，碳化物及夹杂物较多，氢偏聚现象严重。

The catalysts on studying can divide into two kinds: the transition metal bifunctional catalysts and the nitride, carbide and oxycarbide catalysts of transition metals.

目前,正丁烷脱氢异构催化剂可以分为两类,过渡金属双功能催化剂和过渡金属氮化物、碳化物和碳氧化物催化剂。

It holds that main causes promoting crack on martensite stainless steel are gross martensite and crystal boundary carburet and secondary phase distributed along crystal boundary.

文章认为，粗大马氏体组织、晶界碳化物以及沿晶界分布“第二相”组织是促使马氏体不锈钢产生裂纹主要原因。

It is proved that the pressmark of tooth root, the state of carbide and remanentelements in the material have different effects on the toughness of POwer hacksaw blades.

结果证明，机用锯条分齿压痕、基体碳化物状况以及材料中残存元素等对机用锯条韧性有不同程度影响。

Trilobal polycarbosilane(PCS) fibers were prepared by melt spinning PCS precursor through Y-shaped spinnerret.

以聚碳硅烷（PCS）为原料，经和烧成制得三叶型碳硅纤维。

Rare earth can influence for shape size,distribution and quantity of niobium carbonide,decrease activity of carbon and niobium i...

稀土对碳铌形态、大小、分布、数量有影响,可降低碳、铌活度,阻碍碳铌在奥氏体区的析出。

Thermoresistant saggers containing silicon carbide and granular filler were produced through slip casting in plaster mould.

用石膏模浇注法生产出了含碳硅和粒状填料的耐热匣钵。

This paper describes the cutting test of hard alloy tip produced by using the new carbusintering technique.

对采用烧结碳新工艺制取的硬质合金刀片进行了切削试验。

"aragonite: an orthorhombic mineral form of crystalline calcium carbonate, dimorphous with calcite."

文石结晶富钙碳物的一种正晶矿物,具有方解石的两种晶态。

The carbonization of exrtacting constituents of preheated Shenfu noncoking and Liulin dominant coking coal has been studied.

对预热神木粘煤及柳林主煤中同溶剂抽提组分的碳特性分别进行了比较研究。

"carburize:To treat, combine, or impregnate with carbon, as when casehardening steel."

使渗碳,碳:使与碳一起处理,使与碳混合或使充满碳,如将钢的表面粹火硬.

Solo, free of the carbonite and suffering blindness from hibernation sickness, wildly swung a vibro-ax into an inattentive Fett's rocketpack.

韩在被碳过后承受失明和冬眠症状，大力挥舞一只震动斧时意外敲进波巴的喷射背包。

As the isocyan group is polymerized further, diphenyl carbondiimine may be formed, further polymerization of which forms a nitrogen-containing polycyclic aromatic compound.

异氰基合物进一步二聚成二苯基碳二亚胺，后者又聚合生成含氮杂环的多环芳烃。

The benzene ring and alkene structural group are much more stable than structural group of sulfoacid for the carbonifying process of polystyrene.

在碳过程中，聚苯乙烯阳换树脂的苯环结构和烯烃基团比磺酸基团稳定。

Although PM has solved the problem of carbide segregation and crassitude fundamentally, it has complicated technics and extortionate cost, so restricts its application.

粉末冶金虽然从根本上解决了碳物偏析和粗大的问题，但其工艺复杂，成本过高，应用受到限制。

Transformation mechanism of carbides and their effect on the stress rupture property were investigated in a Ni-base single crystal superalloy with microcontent of carbon.

研究了一种含微量(0.015%)碳的镍基单晶高温合金在热处理和持久过程中的碳物演机制以及各种碳物对合金持久性能的影响。

The crack initiates at stress concentration point in the root of weld, where has much more martenite, carbide and inclusion, and the serious hydrogen segregation.

裂纹均在焊缝根部应力集中处萌生，该处马氏体含量比较大，碳物及夹杂物较多，氢的偏聚现象严重。

The catalysts on studying can divide into two kinds: the transition metal bifunctional catalysts and the nitride, carbide and oxycarbide catalysts of transition metals.

目前,正丁烷脱氢异构催剂可以分为两类,过渡金属双功能催剂和过渡金属氮物、碳物和碳氧物催剂。

It holds that main causes promoting crack on martensite stainless steel are gross martensite and crystal boundary carburet and secondary phase distributed along crystal boundary.

文章认为，粗大的马氏体组织、晶界碳物以及沿晶界分布的“第二相”组织是促使马氏体锈钢产生裂纹的主要原因。

It is proved that the pressmark of tooth root, the state of carbide and remanentelements in the material have different effects on the toughness of POwer hacksaw blades.

结果证明，机用锯条的分齿压痕、基体碳物状况以及材料中的残存元素等对机用锯条的韧性有同程度的影响。

Trilobal polycarbosilane(PCS) fibers were prepared by melt spinning PCS precursor through Y-shaped spinnerret.

以聚碳硅烷（PCS）为原料，经不熔化和烧成制得三叶型碳化硅纤维。

Rare earth can influence for shape size,distribution and quantity of niobium carbonide,decrease activity of carbon and niobium i...

稀土对碳化铌形态、大小、分布、数量有影响,可降低碳、铌活度,阻碍碳化铌在奥氏体区的析出。

Thermoresistant saggers containing silicon carbide and granular filler were produced through slip casting in plaster mould.

用石膏模浇注法生产出了含碳化硅和粒状填料的耐热匣钵。

This paper describes the cutting test of hard alloy tip produced by using the new carbusintering technique.

对采用烧结碳化新工艺制取的硬质合金刀片进行了切削试验。

"aragonite: an orthorhombic mineral form of crystalline calcium carbonate, dimorphous with calcite."

文石结晶富钙碳化物的一种正交晶矿物,具有方解石的两种晶态。

The carbonization of exrtacting constituents of preheated Shenfu noncoking and Liulin dominant coking coal has been studied.

对预热神木不粘煤及柳林主煤中不同溶剂抽提组分的碳化特性分别进行了比较研究。

"carburize:To treat, combine, or impregnate with carbon, as when casehardening steel."

使渗碳,碳化:使与碳一起处理,使与碳混合或使充满碳,如将钢的表面粹火硬化.

Solo, free of the carbonite and suffering blindness from hibernation sickness, wildly swung a vibro-ax into an inattentive Fett's rocketpack.

韩在被碳化过后承受失明和冬眠症状，大力挥舞一只震动斧时意外敲进波巴的喷射背包。

As the isocyan group is polymerized further, diphenyl carbondiimine may be formed, further polymerization of which forms a nitrogen-containing polycyclic aromatic compound.

异氰基化合物进一步二聚成二苯基碳化二亚胺，后者又聚合生成含氮杂环的多环芳烃。

The benzene ring and alkene structural group are much more stable than structural group of sulfoacid for the carbonifying process of polystyrene.

在碳化过程中，聚苯乙烯阳离子交换树脂的苯环结构和烯烃基团比磺酸基团。

Although PM has solved the problem of carbide segregation and crassitude fundamentally, it has complicated technics and extortionate cost, so restricts its application.

末冶金虽然从根本上解决了碳化物偏析和粗大的问题，但其工艺复杂，成本过高，应用受到限制。

Transformation mechanism of carbides and their effect on the stress rupture property were investigated in a Ni-base single crystal superalloy with microcontent of carbon.

研究了一种含微量(0.015%)碳的镍基单晶高温合金在热处理和持久过程中的碳化物演化机制以及各种碳化物对合金持久性能的影响。

The crack initiates at stress concentration point in the root of weld, where has much more martenite, carbide and inclusion, and the serious hydrogen segregation.

裂纹均在焊缝根部应力集中处萌生，该处马氏体含量比较大，碳化物及夹杂物较多，氢的偏聚现象严重。

The catalysts on studying can divide into two kinds: the transition metal bifunctional catalysts and the nitride, carbide and oxycarbide catalysts of transition metals.

目前,正丁烷脱氢异构催化剂可以分为两类,过渡金属双功能催化剂和过渡金属氮化物、碳化物和碳氧化物催化剂。

It holds that main causes promoting crack on martensite stainless steel are gross martensite and crystal boundary carburet and secondary phase distributed along crystal boundary.

文章认为，粗大的马氏体组织、晶界碳化物以及沿晶界分布的“第二相”组织是促使马氏体不锈钢产生裂纹的主要原因。

It is proved that the pressmark of tooth root, the state of carbide and remanentelements in the material have different effects on the toughness of POwer hacksaw blades.

结果证明，机用锯条的分齿压痕、基体碳化物状况以及材料中的残存元素等对机用锯条的韧性有不同程度的影响。

Trilobal polycarbosilane(PCS) fibers were prepared by melt spinning PCS precursor through Y-shaped spinnerret.

以聚硅烷（PCS）为原料，经不熔化和烧成制得三叶型化硅纤维。

Rare earth can influence for shape size,distribution and quantity of niobium carbonide,decrease activity of carbon and niobium i...

稀土对化铌形态、大小、分布、数量有影响,可降低、铌活度,阻碍化铌在奥氏体区的析出。

Thermoresistant saggers containing silicon carbide and granular filler were produced through slip casting in plaster mould.

用膏模浇注法生产出了含化硅和粒状填料的耐热匣钵。

This paper describes the cutting test of hard alloy tip produced by using the new carbusintering technique.

对采用烧化新工艺制取的硬质合金刀片进行了切削试验。

"aragonite: an orthorhombic mineral form of crystalline calcium carbonate, dimorphous with calcite."

晶富钙化物的一种正交晶矿物,具有方解的两种晶态。

The carbonization of exrtacting constituents of preheated Shenfu noncoking and Liulin dominant coking coal has been studied.

对预热神木不粘煤及柳林主煤中不同溶剂抽提组分的化特性分别进行了比较研究。

"carburize:To treat, combine, or impregnate with carbon, as when casehardening steel."

渗,化:一起处理,混合或充满,如将钢的表面粹火硬化.

Solo, free of the carbonite and suffering blindness from hibernation sickness, wildly swung a vibro-ax into an inattentive Fett's rocketpack.

韩在被化过后承受失明和冬眠症状，大力挥舞一只震动斧时意外敲进波巴的喷射背包。

As the isocyan group is polymerized further, diphenyl carbondiimine may be formed, further polymerization of which forms a nitrogen-containing polycyclic aromatic compound.

异氰基化合物进一步二聚成二苯基化二亚胺，后者又聚合生成含氮杂环的多环芳烃。

The benzene ring and alkene structural group are much more stable than structural group of sulfoacid for the carbonifying process of polystyrene.

在化过程中，聚苯乙烯阳离子交换树脂的苯环构和烯烃基团比磺酸基团稳定。

Although PM has solved the problem of carbide segregation and crassitude fundamentally, it has complicated technics and extortionate cost, so restricts its application.

粉末冶金虽然从根本上解决了化物偏析和粗大的问题，但其工艺复杂，成本过高，应用受到限制。

Transformation mechanism of carbides and their effect on the stress rupture property were investigated in a Ni-base single crystal superalloy with microcontent of carbon.

研究了一种含微量(0.015%)的镍基单晶高温合金在热处理和持久过程中的化物演化机制以及各种化物对合金持久性能的影响。

The crack initiates at stress concentration point in the root of weld, where has much more martenite, carbide and inclusion, and the serious hydrogen segregation.

裂纹均在焊缝根部应力集中处萌生，该处马氏体含量比较大，化物及夹杂物较多，氢的偏聚现象严重。

The catalysts on studying can divide into two kinds: the transition metal bifunctional catalysts and the nitride, carbide and oxycarbide catalysts of transition metals.

目前,正丁烷脱氢异构催化剂可以分为两类,过渡金属双功能催化剂和过渡金属氮化物、化物和氧化物催化剂。

It holds that main causes promoting crack on martensite stainless steel are gross martensite and crystal boundary carburet and secondary phase distributed along crystal boundary.

章认为，粗大的马氏体组织、晶界化物以及沿晶界分布的“第二相”组织是促马氏体不锈钢产生裂纹的主要原因。

It is proved that the pressmark of tooth root, the state of carbide and remanentelements in the material have different effects on the toughness of POwer hacksaw blades.

果证明，机用锯条的分齿压痕、基体化物状况以及材料中的残存元素等对机用锯条的韧性有不同程度的影响。

Trilobal polycarbosilane(PCS) fibers were prepared by melt spinning PCS precursor through Y-shaped spinnerret.

以聚碳硅烷（PCS）为原料，经不熔化和烧成制得三叶型碳化硅纤维。

Rare earth can influence for shape size,distribution and quantity of niobium carbonide,decrease activity of carbon and niobium i...

稀土对碳化铌形态、大小、分布、数量有影响,可降低碳、铌活度,阻碍碳化铌在奥氏析出。

Thermoresistant saggers containing silicon carbide and granular filler were produced through slip casting in plaster mould.

用石膏模浇注法生产出了含碳化硅和粒状填料耐热匣钵。

This paper describes the cutting test of hard alloy tip produced by using the new carbusintering technique.

对采用烧结碳化新工艺制取硬质合金刀片进行了切削试验。

"aragonite: an orthorhombic mineral form of crystalline calcium carbonate, dimorphous with calcite."

文石结晶富钙碳化物一种正交晶矿物,具有方解石两种晶态。

The carbonization of exrtacting constituents of preheated Shenfu noncoking and Liulin dominant coking coal has been studied.

对预热神木不粘煤及柳林主煤中不同溶剂抽提组分碳化特性分别进行了比较研究。

"carburize:To treat, combine, or impregnate with carbon, as when casehardening steel."

使渗碳,碳化:使与碳一起处理,使与碳混合或使充满碳,如将钢表面粹火硬化.

Solo, free of the carbonite and suffering blindness from hibernation sickness, wildly swung a vibro-ax into an inattentive Fett's rocketpack.

韩在被碳化过后承受失明和冬眠症状，大力挥舞一只震动斧时意外敲进波巴喷射背。

As the isocyan group is polymerized further, diphenyl carbondiimine may be formed, further polymerization of which forms a nitrogen-containing polycyclic aromatic compound.

基化合物进一步二聚成二苯基碳化二亚胺，后者又聚合生成含氮杂环多环芳烃。

The benzene ring and alkene structural group are much more stable than structural group of sulfoacid for the carbonifying process of polystyrene.

在碳化过程中，聚苯乙烯阳离子交换树脂苯环结构和烯烃基团比磺酸基团稳定。

Although PM has solved the problem of carbide segregation and crassitude fundamentally, it has complicated technics and extortionate cost, so restricts its application.

粉末冶金虽然从根本上解决了碳化物偏析和粗大问题，但其工艺复杂，成本过高，应用受到限制。

Transformation mechanism of carbides and their effect on the stress rupture property were investigated in a Ni-base single crystal superalloy with microcontent of carbon.

研究了一种含微量(0.015%)碳镍基单晶高温合金在热处理和持久过程中碳化物演化机制以及各种碳化物对合金持久性能影响。

The crack initiates at stress concentration point in the root of weld, where has much more martenite, carbide and inclusion, and the serious hydrogen segregation.

裂纹均在焊缝根部应力集中处萌生，该处马氏含量比较大，碳化物及夹杂物较多，氢偏聚现象严重。

The catalysts on studying can divide into two kinds: the transition metal bifunctional catalysts and the nitride, carbide and oxycarbide catalysts of transition metals.

目前,正丁烷脱氢构催化剂可以分为两类,过渡金属双功能催化剂和过渡金属氮化物、碳化物和碳氧化物催化剂。

It holds that main causes promoting crack on martensite stainless steel are gross martensite and crystal boundary carburet and secondary phase distributed along crystal boundary.

文章认为，粗大马氏组织、晶界碳化物以及沿晶界分布“第二相”组织是促使马氏不锈钢产生裂纹主要原因。

It is proved that the pressmark of tooth root, the state of carbide and remanentelements in the material have different effects on the toughness of POwer hacksaw blades.

结果证明，机用锯条分齿压痕、基碳化物状况以及材料中残存元素等对机用锯条韧性有不同程度影响。

Trilobal polycarbosilane(PCS) fibers were prepared by melt spinning PCS precursor through Y-shaped spinnerret.

以聚硅烷（PCS）为原料，经不熔和烧成制得三叶型硅纤维。

Rare earth can influence for shape size,distribution and quantity of niobium carbonide,decrease activity of carbon and niobium i...

稀土对铌形态、大小、分布、数量有影响,可降低、铌活度,阻碍铌在奥氏体区的析出。

Thermoresistant saggers containing silicon carbide and granular filler were produced through slip casting in plaster mould.

用石膏模浇注法生产出了含硅和粒状填料的耐热匣钵。

This paper describes the cutting test of hard alloy tip produced by using the new carbusintering technique.

对采用烧结新工艺制取的硬质合金刀片进行了切削试验。

"aragonite: an orthorhombic mineral form of crystalline calcium carbonate, dimorphous with calcite."

文石结晶富钙物的交晶矿物,具有方解石的两晶态。

The carbonization of exrtacting constituents of preheated Shenfu noncoking and Liulin dominant coking coal has been studied.

对预热神木不粘煤及柳林主煤中不同溶剂抽提组分的特性分别进行了比较研究。

"carburize:To treat, combine, or impregnate with carbon, as when casehardening steel."

使渗,:使与起处理,使与混合或使充满,如将钢的表面粹火硬.

Solo, free of the carbonite and suffering blindness from hibernation sickness, wildly swung a vibro-ax into an inattentive Fett's rocketpack.

韩在被过后承受失明和冬眠症状，大力挥舞只震动斧时意外敲进波巴的喷射背包。

As the isocyan group is polymerized further, diphenyl carbondiimine may be formed, further polymerization of which forms a nitrogen-containing polycyclic aromatic compound.

异氰基合物进步二聚成二苯基二亚胺，后者又聚合生成含氮杂环的多环芳烃。

The benzene ring and alkene structural group are much more stable than structural group of sulfoacid for the carbonifying process of polystyrene.

在过程中，聚苯乙烯阳离子交换树脂的苯环结构和烯烃基团比磺酸基团稳定。

Although PM has solved the problem of carbide segregation and crassitude fundamentally, it has complicated technics and extortionate cost, so restricts its application.

粉末冶金虽然从根本上解决了物偏析和粗大的问题，但其工艺复杂，成本过高，应用受到限制。

Transformation mechanism of carbides and their effect on the stress rupture property were investigated in a Ni-base single crystal superalloy with microcontent of carbon.

研究了含微量(0.015%)的镍基单晶高温合金在热处理和持久过程中的物演机制以及各物对合金持久性能的影响。

The crack initiates at stress concentration point in the root of weld, where has much more martenite, carbide and inclusion, and the serious hydrogen segregation.

裂纹均在焊缝根部应力集中处萌生，该处马氏体含量比较大，物及夹杂物较多，氢的偏聚现象严重。

The catalysts on studying can divide into two kinds: the transition metal bifunctional catalysts and the nitride, carbide and oxycarbide catalysts of transition metals.

目前,丁烷脱氢异构催剂可以分为两类,过渡金属双功能催剂和过渡金属氮物、物和氧物催剂。

It holds that main causes promoting crack on martensite stainless steel are gross martensite and crystal boundary carburet and secondary phase distributed along crystal boundary.

文章认为，粗大的马氏体组织、晶界物以及沿晶界分布的“第二相”组织是促使马氏体不锈钢产生裂纹的主要原因。

It is proved that the pressmark of tooth root, the state of carbide and remanentelements in the material have different effects on the toughness of POwer hacksaw blades.

结果证明，机用锯条的分齿压痕、基体物状况以及材料中的残存元素等对机用锯条的韧性有不同程度的影响。

Trilobal polycarbosilane(PCS) fibers were prepared by melt spinning PCS precursor through Y-shaped spinnerret.

以聚碳硅烷（PCS）为原料，经不熔化和烧成制得三叶型碳化硅纤维。

Rare earth can influence for shape size,distribution and quantity of niobium carbonide,decrease activity of carbon and niobium i...

稀土对碳化铌形态、大小、分布、数量有影响,可降低碳、铌活度,阻碍碳化铌在奥氏体区的析出。

Thermoresistant saggers containing silicon carbide and granular filler were produced through slip casting in plaster mould.

用石膏模浇注法生产出了含碳化硅和粒状填料的耐热匣钵。

This paper describes the cutting test of hard alloy tip produced by using the new carbusintering technique.

对采用烧结碳化新工艺制取的硬质合金刀片进行了切削试验。

"aragonite: an orthorhombic mineral form of crystalline calcium carbonate, dimorphous with calcite."

文石结晶富钙碳化物的一种正交晶矿物,具有方解石的两种晶态。

The carbonization of exrtacting constituents of preheated Shenfu noncoking and Liulin dominant coking coal has been studied.

对预热神木不粘煤及柳林主煤中不同溶剂抽提组分的碳化特性分别进行了比较研究。

"carburize:To treat, combine, or impregnate with carbon, as when casehardening steel."

使渗碳,碳化:使与碳一起处理,使与碳混合或使充满碳,如将钢的表面粹火硬化.

Solo, free of the carbonite and suffering blindness from hibernation sickness, wildly swung a vibro-ax into an inattentive Fett's rocketpack.

韩在被碳化过后承受失明和冬眠症状，大力挥舞一只震动斧时意外敲进波巴的喷射背包。

As the isocyan group is polymerized further, diphenyl carbondiimine may be formed, further polymerization of which forms a nitrogen-containing polycyclic aromatic compound.

异氰基化合物进一步二聚成二苯基碳化二亚胺，后者又聚合生成含氮杂环的多环芳烃。

The benzene ring and alkene structural group are much more stable than structural group of sulfoacid for the carbonifying process of polystyrene.

在碳化过程中，聚苯乙烯阳离子交换树脂的苯环结构和烯烃基比磺酸基。

Although PM has solved the problem of carbide segregation and crassitude fundamentally, it has complicated technics and extortionate cost, so restricts its application.

粉末冶金虽然从根本上解决了碳化物偏析和粗大的问题，但其工艺复杂，成本过高，应用受到限制。

Transformation mechanism of carbides and their effect on the stress rupture property were investigated in a Ni-base single crystal superalloy with microcontent of carbon.

研究了一种含微量(0.015%)碳的镍基单晶高温合金在热处理和持久过程中的碳化物演化机制以及各种碳化物对合金持久性能的影响。

The crack initiates at stress concentration point in the root of weld, where has much more martenite, carbide and inclusion, and the serious hydrogen segregation.

裂纹均在焊缝根部应力集中处萌生，该处马氏体含量比较大，碳化物及夹杂物较多，氢的偏聚现象严重。

The catalysts on studying can divide into two kinds: the transition metal bifunctional catalysts and the nitride, carbide and oxycarbide catalysts of transition metals.

目前,正丁烷脱氢异构催化剂可以分为两类,过渡金属双功能催化剂和过渡金属氮化物、碳化物和碳氧化物催化剂。

It holds that main causes promoting crack on martensite stainless steel are gross martensite and crystal boundary carburet and secondary phase distributed along crystal boundary.

文章认为，粗大的马氏体组织、晶界碳化物以及沿晶界分布的“第二相”组织是促使马氏体不锈钢产生裂纹的主要原因。

It is proved that the pressmark of tooth root, the state of carbide and remanentelements in the material have different effects on the toughness of POwer hacksaw blades.

结果证明，机用锯条的分齿压痕、基体碳化物状况以及材料中的残存元素等对机用锯条的韧性有不同程度的影响。

Trilobal polycarbosilane(PCS) fibers were prepared by melt spinning PCS precursor through Y-shaped spinnerret.

以聚碳硅（PCS）料，经不熔化和烧成制得三叶型碳化硅纤维。

Rare earth can influence for shape size,distribution and quantity of niobium carbonide,decrease activity of carbon and niobium i...

稀土对碳化铌形态、大小、分布、数量有影响,可降低碳、铌活度,阻碍碳化铌在奥氏体区析出。

Thermoresistant saggers containing silicon carbide and granular filler were produced through slip casting in plaster mould.

用石膏模浇注法生产出了含碳化硅和粒状填料耐热匣钵。

This paper describes the cutting test of hard alloy tip produced by using the new carbusintering technique.

对采用烧结碳化新工艺制取硬质合金刀片进行了切削试验。

"aragonite: an orthorhombic mineral form of crystalline calcium carbonate, dimorphous with calcite."

文石结晶富钙碳化物一种正交晶矿物,具有方解石两种晶态。

The carbonization of exrtacting constituents of preheated Shenfu noncoking and Liulin dominant coking coal has been studied.

对预热神木不粘煤及柳林主煤中不同溶剂抽提组分碳化特性分别进行了比较研究。

"carburize:To treat, combine, or impregnate with carbon, as when casehardening steel."

使渗碳,碳化:使与碳一起处理,使与碳混合或使充满碳,如将钢表面粹火硬化.

Solo, free of the carbonite and suffering blindness from hibernation sickness, wildly swung a vibro-ax into an inattentive Fett's rocketpack.

韩在被碳化过后承受失明和冬眠症状，大力挥舞一只震动斧时意外敲进波巴喷射背包。

As the isocyan group is polymerized further, diphenyl carbondiimine may be formed, further polymerization of which forms a nitrogen-containing polycyclic aromatic compound.

异氰基化合物进一步二聚成二基碳化二亚胺，后者又聚合生成含氮杂环多环芳烃。

The benzene ring and alkene structural group are much more stable than structural group of sulfoacid for the carbonifying process of polystyrene.

在碳化过程中，聚乙烯阳离子交换树环结构和烯烃基团比磺酸基团稳定。

Although PM has solved the problem of carbide segregation and crassitude fundamentally, it has complicated technics and extortionate cost, so restricts its application.

粉末冶金虽然从根本上解决了碳化物偏析和粗大问题，但其工艺复杂，成本过高，应用受到限制。

Transformation mechanism of carbides and their effect on the stress rupture property were investigated in a Ni-base single crystal superalloy with microcontent of carbon.

研究了一种含微量(0.015%)碳镍基单晶高温合金在热处理和持久过程中碳化物演化机制以及各种碳化物对合金持久性能影响。

The crack initiates at stress concentration point in the root of weld, where has much more martenite, carbide and inclusion, and the serious hydrogen segregation.

裂纹均在焊缝根部应力集中处萌生，该处马氏体含量比较大，碳化物及夹杂物较多，氢偏聚现象严重。

The catalysts on studying can divide into two kinds: the transition metal bifunctional catalysts and the nitride, carbide and oxycarbide catalysts of transition metals.

目前,正丁脱氢异构催化剂可以分两类,过渡金属双功能催化剂和过渡金属氮化物、碳化物和碳氧化物催化剂。

It holds that main causes promoting crack on martensite stainless steel are gross martensite and crystal boundary carburet and secondary phase distributed along crystal boundary.

文章认，粗大马氏体组织、晶界碳化物以及沿晶界分布“第二相”组织是促使马氏体不锈钢产生裂纹主要因。

It is proved that the pressmark of tooth root, the state of carbide and remanentelements in the material have different effects on the toughness of POwer hacksaw blades.

结果证明，机用锯条分齿压痕、基体碳化物状况以及材料中残存元素等对机用锯条韧性有不同程度影响。

Trilobal polycarbosilane(PCS) fibers were prepared by melt spinning PCS precursor through Y-shaped spinnerret.

以聚碳硅烷（PCS）为原料，经熔化和烧成制得三叶型碳化硅纤维。

Rare earth can influence for shape size,distribution and quantity of niobium carbonide,decrease activity of carbon and niobium i...

稀土对碳化铌形态、大小、分布、数量有影响,可降低碳、铌活度,阻碍碳化铌在奥氏体区的析出。

Thermoresistant saggers containing silicon carbide and granular filler were produced through slip casting in plaster mould.

用石膏模浇注法生产出了含碳化硅和粒状填料的耐热匣钵。

This paper describes the cutting test of hard alloy tip produced by using the new carbusintering technique.

对采用烧结碳化新工艺制取的硬质合金刀片进行了切削试验。

"aragonite: an orthorhombic mineral form of crystalline calcium carbonate, dimorphous with calcite."

文石结晶富钙碳化物的一种正交晶矿物,具有方解石的两种晶态。

The carbonization of exrtacting constituents of preheated Shenfu noncoking and Liulin dominant coking coal has been studied.

对预热神煤及柳林主煤中同溶组分的碳化特性分别进行了比较研究。

"carburize:To treat, combine, or impregnate with carbon, as when casehardening steel."

使渗碳,碳化:使与碳一起处理,使与碳混合或使充满碳,如将钢的表面粹火硬化.

Solo, free of the carbonite and suffering blindness from hibernation sickness, wildly swung a vibro-ax into an inattentive Fett's rocketpack.

韩在被碳化过后承受失明和冬眠症状，大力挥舞一只震动斧时意外敲进波巴的喷射背包。

As the isocyan group is polymerized further, diphenyl carbondiimine may be formed, further polymerization of which forms a nitrogen-containing polycyclic aromatic compound.

异氰基化合物进一步二聚成二苯基碳化二亚胺，后者又聚合生成含氮杂环的多环芳烃。

The benzene ring and alkene structural group are much more stable than structural group of sulfoacid for the carbonifying process of polystyrene.

在碳化过程中，聚苯乙烯阳离子交换树脂的苯环结构和烯烃基团比磺酸基团稳定。

Although PM has solved the problem of carbide segregation and crassitude fundamentally, it has complicated technics and extortionate cost, so restricts its application.

粉末冶金虽然从根本上解决了碳化物偏析和粗大的问题，但其工艺复杂，成本过高，应用受到限制。

Transformation mechanism of carbides and their effect on the stress rupture property were investigated in a Ni-base single crystal superalloy with microcontent of carbon.

研究了一种含微量(0.015%)碳的镍基单晶高温合金在热处理和持久过程中的碳化物演化机制以及各种碳化物对合金持久性能的影响。

The crack initiates at stress concentration point in the root of weld, where has much more martenite, carbide and inclusion, and the serious hydrogen segregation.

裂纹均在焊缝根部应力集中处萌生，该处马氏体含量比较大，碳化物及夹杂物较多，氢的偏聚现象严重。

The catalysts on studying can divide into two kinds: the transition metal bifunctional catalysts and the nitride, carbide and oxycarbide catalysts of transition metals.

目前,正丁烷脱氢异构催化可以分为两类,过渡金属双功能催化和过渡金属氮化物、碳化物和碳氧化物催化。

It holds that main causes promoting crack on martensite stainless steel are gross martensite and crystal boundary carburet and secondary phase distributed along crystal boundary.

文章认为，粗大的马氏体组织、晶界碳化物以及沿晶界分布的“第二相”组织是促使马氏体锈钢产生裂纹的主要原因。

It is proved that the pressmark of tooth root, the state of carbide and remanentelements in the material have different effects on the toughness of POwer hacksaw blades.

结果证明，机用锯条的分齿压痕、基体碳化物状况以及材料中的残存元素等对机用锯条的韧性有同程度的影响。