In this paper,a fuzzy hypersphere support vector machine(FHS-SVM) landmine detector was proposed.

本文提出了模糊超球面支持向量机(FHS-SVM)地雷检测器。

Some important theoretical issues of catadioptric omnidirectional systems for the spherical mirror are researched.

摘要对球面折反射全向视觉系统的某些理论问题进行了研究。

In this paper, model of aspherisation for higher-dioptry spectacle lens is investigated.

本文研究高屈光度眼用除离轴像散的非球面化模式。

The convex aspheric surface has self-aplanatic capability.The range that can be utilized in practice was studied.

分析了自球差方法检验凸二次非球面的实际可用范围。

A non-wrinkling limited graph for spherical surface parts of retiary metal sheet and metal sheet is obtained.

通过模拟得到了带孔板和无孔板成形球面件时不起皱成形极限与板厚的关系曲线。

Using biserial roller axletree with centripetal spherical support of the host axletree can reduce energy consumption by 30%.

主轴承受用双列向心还球面滚子轴承，可降低30%。

Concentric spheres are parallel.

心球面是平行的。

Isoperimetric inequality for sphere and ellipsoid is discussed, and the isoperimetric inequality of some region satisfying certain conditions is given.

全应力的变化范围常用应力椭球方程和应力椭球面来描述。

Calculating formulas and derived process of main angles of stator coil colloidization model at bottom end of spherical coordinate are introduced.

本文介绍了定子线圈胶化模在球面坐标系下端部几个主要角度的计算公式以及推导过程。

In the article we analyse the structure compose,the endure force status,the request of strength and stability on the domed bulkhead with nonaxisymmetry sphere-conical transitional annulated shell.

系统分析了带有非轴对称球锥过渡环壳的球面舱壁的结构组成、受力工况、强度与稳定性要求,用有限元方法对各参数进行了强度优化与稳定性优化。

In this paper, we show that the Pseudo-Symmetric property of spherical point set can be characterized by the eigen values of eigenpolynomial and it has the closeness under the metric sum operation.

本文证明了球面有限点集的伪对称性可以完全由其特征多项式的根来刻画，并得到了在度量加运算下伪对称性具有封闭性.

In this paper,a fuzzy hypersphere support vector machine(FHS-SVM) landmine detector was proposed.

本文提出了模糊超支持向量机(FHS-SVM)地雷检测器。

Some important theoretical issues of catadioptric omnidirectional systems for the spherical mirror are researched.

摘要对镜折反射全向视觉系统的某些理论问题进行了研究。

In this paper, model of aspherisation for higher-dioptry spectacle lens is investigated.

本文研究高屈光度眼用透镜消除离轴像散的非化模式。

The convex aspheric surface has self-aplanatic capability.The range that can be utilized in practice was studied.

分析了自消差方法检验凸二次非的实际可用范。

A non-wrinkling limited graph for spherical surface parts of retiary metal sheet and metal sheet is obtained.

模拟得到了带孔板和无孔板成形件时不起皱成形极限与板厚的关系曲线。

Using biserial roller axletree with centripetal spherical support of the host axletree can reduce energy consumption by 30%.

主轴承受用双列向心还滚子轴承，可降低能耗30%。

Concentric spheres are parallel.

同心是平行的。

Isoperimetric inequality for sphere and ellipsoid is discussed, and the isoperimetric inequality of some region satisfying certain conditions is given.

全应力的变化范常用应力椭方程和应力椭来描述。

Calculating formulas and derived process of main angles of stator coil colloidization model at bottom end of spherical coordinate are introduced.

本文介绍了定子线圈胶化模在坐标系下端部几个主要角度的计算公式以及推导程。

In the article we analyse the structure compose,the endure force status,the request of strength and stability on the domed bulkhead with nonaxisymmetry sphere-conical transitional annulated shell.

系统分析了带有非轴对称锥渡环壳的舱壁的结构组成、受力工况、强度与稳定性要求,用有限元方法对各参数进行了强度优化与稳定性优化。

In this paper, we show that the Pseudo-Symmetric property of spherical point set can be characterized by the eigen values of eigenpolynomial and it has the closeness under the metric sum operation.

本文证明了有限点集的伪对称性可以完全由其特征多项式的根来刻画，并得到了在度量加运算下伪对称性具有封闭性.

In this paper,a fuzzy hypersphere support vector machine(FHS-SVM) landmine detector was proposed.

本文提出了糊超球面支持量机(FHS-SVM)地雷检测器。

Some important theoretical issues of catadioptric omnidirectional systems for the spherical mirror are researched.

摘要对球面镜折反射全视觉系统的某些理论问题进行了研究。

In this paper, model of aspherisation for higher-dioptry spectacle lens is investigated.

本文研究高屈光度眼用透镜消除离轴像散的非球面。

The convex aspheric surface has self-aplanatic capability.The range that can be utilized in practice was studied.

分析了自消球差方法检验凸二次非球面的实际可用范围。

A non-wrinkling limited graph for spherical surface parts of retiary metal sheet and metal sheet is obtained.

通过拟得到了带孔板和无孔板成形球面件时不起皱成形极限与板厚的关系曲线。

Using biserial roller axletree with centripetal spherical support of the host axletree can reduce energy consumption by 30%.

主轴承受用双列球面滚子轴承，可降低能耗30%。

Concentric spheres are parallel.

同球面是平行的。

Isoperimetric inequality for sphere and ellipsoid is discussed, and the isoperimetric inequality of some region satisfying certain conditions is given.

全应力的变范围常用应力椭球方程和应力椭球面来描述。

Calculating formulas and derived process of main angles of stator coil colloidization model at bottom end of spherical coordinate are introduced.

本文介绍了定子线圈胶在球面坐标系下端部几个主要角度的计算公以及推导过程。

In the article we analyse the structure compose,the endure force status,the request of strength and stability on the domed bulkhead with nonaxisymmetry sphere-conical transitional annulated shell.

系统分析了带有非轴对称球锥过渡环壳的球面舱壁的结构组成、受力工况、强度与稳定性要求,用有限元方法对各参数进行了强度优与稳定性优。

In this paper, we show that the Pseudo-Symmetric property of spherical point set can be characterized by the eigen values of eigenpolynomial and it has the closeness under the metric sum operation.

本文证明了球面有限点集的伪对称性可以完全由其特征多项的根来刻画，并得到了在度量加运算下伪对称性具有封闭性.

In this paper,a fuzzy hypersphere support vector machine(FHS-SVM) landmine detector was proposed.

本文提出了模糊超球面支持向量机(FHS-SVM)地雷检测器。

Some important theoretical issues of catadioptric omnidirectional systems for the spherical mirror are researched.

摘要对球面镜折反射全向视觉系统某些理论问题进行了研究。

In this paper, model of aspherisation for higher-dioptry spectacle lens is investigated.

本文研究高屈光眼用透镜消除离轴像散非球面化模式。

The convex aspheric surface has self-aplanatic capability.The range that can be utilized in practice was studied.

分析了自消球差方法检验凸二次非球面实际可用范围。

A non-wrinkling limited graph for spherical surface parts of retiary metal sheet and metal sheet is obtained.

通过模拟得到了带孔板和无孔板成形球面件时不起皱成形极限与板厚关系曲线。

Using biserial roller axletree with centripetal spherical support of the host axletree can reduce energy consumption by 30%.

主轴承受用双列向心还球面滚子轴承，可降低能耗30%。

Concentric spheres are parallel.

同心球面是平行。

Isoperimetric inequality for sphere and ellipsoid is discussed, and the isoperimetric inequality of some region satisfying certain conditions is given.

全应力变化范围常用应力椭球方程和应力椭球面来描述。

Calculating formulas and derived process of main angles of stator coil colloidization model at bottom end of spherical coordinate are introduced.

本文介绍了定子线圈胶化模在球面坐标系下端部几个主要计算公式以及推导过程。

In the article we analyse the structure compose,the endure force status,the request of strength and stability on the domed bulkhead with nonaxisymmetry sphere-conical transitional annulated shell.

系统分析了带有非轴对称球锥过渡环壳球面舱壁结构组成、受力工况、强与稳定性要求,用有限元方法对各参数进行了强优化与稳定性优化。

In this paper, we show that the Pseudo-Symmetric property of spherical point set can be characterized by the eigen values of eigenpolynomial and it has the closeness under the metric sum operation.

本文证明了球面有限点集伪对称性可以完全由其特征多项式根来刻画，并得到了在量加运算下伪对称性具有封闭性.

In this paper,a fuzzy hypersphere support vector machine(FHS-SVM) landmine detector was proposed.

本文提出了糊超球面支持向量机(FHS-SVM)地雷检测器。

Some important theoretical issues of catadioptric omnidirectional systems for the spherical mirror are researched.

摘要对球面镜折反射全向视觉系统的某些理论问题进行了研究。

In this paper, model of aspherisation for higher-dioptry spectacle lens is investigated.

本文研究高屈光度眼用透镜消除离轴像散的非球面化式。

The convex aspheric surface has self-aplanatic capability.The range that can be utilized in practice was studied.

分析了自消球差方法检验凸二次非球面的实际可用范围。

A non-wrinkling limited graph for spherical surface parts of retiary metal sheet and metal sheet is obtained.

通过到了带孔和无孔球面件时不起皱极限与厚的关系曲线。

Using biserial roller axletree with centripetal spherical support of the host axletree can reduce energy consumption by 30%.

主轴承受用双列向心还球面滚子轴承，可降低能耗30%。

Concentric spheres are parallel.

同心球面是平行的。

Isoperimetric inequality for sphere and ellipsoid is discussed, and the isoperimetric inequality of some region satisfying certain conditions is given.

全应力的变化范围常用应力椭球方程和应力椭球面来描述。

Calculating formulas and derived process of main angles of stator coil colloidization model at bottom end of spherical coordinate are introduced.

本文介绍了定子线圈胶化在球面坐标系下端部几个主要角度的计算公式以及推导过程。

In the article we analyse the structure compose,the endure force status,the request of strength and stability on the domed bulkhead with nonaxisymmetry sphere-conical transitional annulated shell.

系统分析了带有非轴对称球锥过渡环壳的球面舱壁的结构组、受力工况、强度与稳定性要求,用有限元方法对各参数进行了强度优化与稳定性优化。

In this paper, we show that the Pseudo-Symmetric property of spherical point set can be characterized by the eigen values of eigenpolynomial and it has the closeness under the metric sum operation.

本文证明了球面有限点集的伪对称性可以完全由其特征多项式的根来刻画，并到了在度量加运算下伪对称性具有封闭性.

In this paper,a fuzzy hypersphere support vector machine(FHS-SVM) landmine detector was proposed.

本文提出了模糊超支持向量机(FHS-SVM)地雷检测器。

Some important theoretical issues of catadioptric omnidirectional systems for the spherical mirror are researched.

摘要对镜折反射全向视觉系统某些理论问题进行了研究。

In this paper, model of aspherisation for higher-dioptry spectacle lens is investigated.

本文研究高屈光度眼用透镜消除离轴像散非化模式。

The convex aspheric surface has self-aplanatic capability.The range that can be utilized in practice was studied.

分析了自消差方法检验凸二次非实际可用范围。

A non-wrinkling limited graph for spherical surface parts of retiary metal sheet and metal sheet is obtained.

通过模拟得到了带孔板和无孔板成件时不起皱成与板厚关系曲线。

Using biserial roller axletree with centripetal spherical support of the host axletree can reduce energy consumption by 30%.

主轴承受用双列向心还滚子轴承，可降低能耗30%。

Concentric spheres are parallel.

同心是平行。

Isoperimetric inequality for sphere and ellipsoid is discussed, and the isoperimetric inequality of some region satisfying certain conditions is given.

全应力变化范围常用应力椭方程和应力椭来描述。

Calculating formulas and derived process of main angles of stator coil colloidization model at bottom end of spherical coordinate are introduced.

本文介绍了定子线圈胶化模在坐标系下端部几个主要角度计算公式以及推导过程。

In the article we analyse the structure compose,the endure force status,the request of strength and stability on the domed bulkhead with nonaxisymmetry sphere-conical transitional annulated shell.

系统分析了带有非轴对称锥过渡环壳舱壁结构组成、受力工况、强度与稳定性要求,用有元方法对各参数进行了强度优化与稳定性优化。

In this paper, we show that the Pseudo-Symmetric property of spherical point set can be characterized by the eigen values of eigenpolynomial and it has the closeness under the metric sum operation.

本文证明了有点集伪对称性可以完全由其特征多项式根来刻画，并得到了在度量加运算下伪对称性具有封闭性.

In this paper,a fuzzy hypersphere support vector machine(FHS-SVM) landmine detector was proposed.

本文提出了模糊超支持向量机(FHS-SVM)地雷检测器。

Some important theoretical issues of catadioptric omnidirectional systems for the spherical mirror are researched.

摘要对镜折反射全向视觉系统的某些理论问题进行了研究。

In this paper, model of aspherisation for higher-dioptry spectacle lens is investigated.

本文研究高屈光度眼用透镜消除离轴像散的化模式。

The convex aspheric surface has self-aplanatic capability.The range that can be utilized in practice was studied.

分析了自消差方法检验凸二次的实际可用范围。

A non-wrinkling limited graph for spherical surface parts of retiary metal sheet and metal sheet is obtained.

通过模拟得到了带孔板和无孔板成形件时不起皱成形极限与板厚的关系曲线。

Using biserial roller axletree with centripetal spherical support of the host axletree can reduce energy consumption by 30%.

主轴承受用双列向心还子轴承，可降低能耗30%。

Concentric spheres are parallel.

同心是平行的。

Isoperimetric inequality for sphere and ellipsoid is discussed, and the isoperimetric inequality of some region satisfying certain conditions is given.

全应力的变化范围常用应力椭方程和应力椭来描述。

Calculating formulas and derived process of main angles of stator coil colloidization model at bottom end of spherical coordinate are introduced.

本文介绍了定子线圈胶化模在坐标系下端部几个主要角度的计算公式以及推导过程。

In the article we analyse the structure compose,the endure force status,the request of strength and stability on the domed bulkhead with nonaxisymmetry sphere-conical transitional annulated shell.

系统分析了带有轴对称锥过渡环壳的舱壁的结构组成、受力工况、强度与稳定性要求,用有限元方法对各参数进行了强度优化与稳定性优化。

In this paper, we show that the Pseudo-Symmetric property of spherical point set can be characterized by the eigen values of eigenpolynomial and it has the closeness under the metric sum operation.

本文证明了有限点集的伪对称性可以完全由其特征多项式的根来刻画，并得到了在度量加运算下伪对称性具有封闭性.

In this paper,a fuzzy hypersphere support vector machine(FHS-SVM) landmine detector was proposed.

提出了模糊超球面支持向量机(FHS-SVM)地雷检测器。

Some important theoretical issues of catadioptric omnidirectional systems for the spherical mirror are researched.

摘对球面镜折反射全向视觉系统的某些理论问题进行了研究。

In this paper, model of aspherisation for higher-dioptry spectacle lens is investigated.

研究高屈光度眼用透镜消除离轴像散的非球面化模式。

The convex aspheric surface has self-aplanatic capability.The range that can be utilized in practice was studied.

分析了自消球差方法检验凸二次非球面的实际可用范围。

A non-wrinkling limited graph for spherical surface parts of retiary metal sheet and metal sheet is obtained.

通过模拟得到了带孔板和无孔板成形球面件时不起皱成形极限与板厚的关系曲线。

Using biserial roller axletree with centripetal spherical support of the host axletree can reduce energy consumption by 30%.

轴承受用双列向心还球面滚子轴承，可降低能耗30%。

Concentric spheres are parallel.

同心球面是平行的。

Isoperimetric inequality for sphere and ellipsoid is discussed, and the isoperimetric inequality of some region satisfying certain conditions is given.

全应力的变化范围常用应力椭球方程和应力椭球面来描述。

Calculating formulas and derived process of main angles of stator coil colloidization model at bottom end of spherical coordinate are introduced.

介绍了定子线圈胶化模在球面坐标系下端部几个度的计算公式以及推导过程。

In the article we analyse the structure compose,the endure force status,the request of strength and stability on the domed bulkhead with nonaxisymmetry sphere-conical transitional annulated shell.

系统分析了带有非轴对称球锥过渡环壳的球面舱壁的结构组成、受力工况、强度与稳定性求,用有限元方法对各参数进行了强度优化与稳定性优化。

In this paper, we show that the Pseudo-Symmetric property of spherical point set can be characterized by the eigen values of eigenpolynomial and it has the closeness under the metric sum operation.

证明了球面有限点集的伪对称性可以完全由其特征多项式的根来刻画，并得到了在度量加运算下伪对称性具有封闭性.

In this paper,a fuzzy hypersphere support vector machine(FHS-SVM) landmine detector was proposed.

本文提出了模糊超面支持量机(FHS-SVM)地雷检测器。

Some important theoretical issues of catadioptric omnidirectional systems for the spherical mirror are researched.

摘要对面镜折反射觉系统的某些理论问题进行了研究。

In this paper, model of aspherisation for higher-dioptry spectacle lens is investigated.

本文研究高屈光度眼用透镜消除离轴像散的非面化模式。

The convex aspheric surface has self-aplanatic capability.The range that can be utilized in practice was studied.

分析了自消差方法检验凸二次非面的实际可用范围。

A non-wrinkling limited graph for spherical surface parts of retiary metal sheet and metal sheet is obtained.

通过模拟得到了带孔板和无孔板成形面件时不起皱成形极限与板厚的关系曲线。

Using biserial roller axletree with centripetal spherical support of the host axletree can reduce energy consumption by 30%.

主轴承受用双列心还面滚子轴承，可降低能耗30%。

Concentric spheres are parallel.

同心面是平行的。

Isoperimetric inequality for sphere and ellipsoid is discussed, and the isoperimetric inequality of some region satisfying certain conditions is given.

应的变化范围常用应方程和应面来描述。

Calculating formulas and derived process of main angles of stator coil colloidization model at bottom end of spherical coordinate are introduced.

本文介绍了定子线圈胶化模在面坐标系下端部几个主要角度的计算公式以及推导过程。

In the article we analyse the structure compose,the endure force status,the request of strength and stability on the domed bulkhead with nonaxisymmetry sphere-conical transitional annulated shell.

系统分析了带有非轴对称锥过渡环壳的面舱壁的结构组成、受工况、强度与稳定性要求,用有限元方法对各参数进行了强度优化与稳定性优化。

In this paper, we show that the Pseudo-Symmetric property of spherical point set can be characterized by the eigen values of eigenpolynomial and it has the closeness under the metric sum operation.

本文证明了面有限点集的伪对称性可以完由其特征多项式的根来刻画，并得到了在度量加运算下伪对称性具有封闭性.