The finite element models of axial tension member and eccentrical tension members are established with ANSYS finite element program.
4、用通用有限元分析软件ANSYS混凝土轴心和偏心受拉
有限元模型,进行分析并得到
受拉构件
应力云图、变形图及开裂图,并与理论分析结
进行
比较。
The finite element models of axial tension member and eccentrical tension members are established with ANSYS finite element program.
4、用通用有限元分析软件ANSYS混凝土轴心和偏心受拉
有限元模型,进行分析并得到
受拉构件
应力云图、变形图及开裂图,并与理论分析结
进行
比较。
During two cooling methods, whether tension stress or compression stress, the retained austenite in steel reduced with stress increasing, had become from massive to streak or filminess.
在两种冷却方式下,不论拉应力还是压应力作用,均使组织中残余奥氏体数量减少,形貌由无应力时
变为条
或薄膜
。
声明:以上例句、词性分类均由互联网资源自动生成,部分未经过人工审核,其表达内容亦不代表本软件观点;若发现问题,欢迎向我们指正。
The finite element models of axial tension member and eccentrical tension members are established with ANSYS finite element program.
4、用通用有限元软件ANSYS建立
混凝土轴心和偏心受拉的有限元模型,进
并得到
受拉构件的应力云图、变形图及开裂图,并与理
结
进
较。
During two cooling methods, whether tension stress or compression stress, the retained austenite in steel reduced with stress increasing, had become from massive to streak or filminess.
在两种冷却方式下,不拉应力还是压应力的作用,均使组织中残余奥氏体数量减少,形貌由无应力时的块状变为条状或薄膜状。
声明:以上例句、词性类均由互联网资源自动生成,部
未经过人工审核,其表达内容亦不代表本软件的观点;若发现问题,欢迎向我们指正。
The finite element models of axial tension member and eccentrical tension members are established with ANSYS finite element program.
4、用通用有限元分析软件ANSYS建立了混凝土轴心和偏心受拉的有限元模型,进行分析并得到了受拉构件的应力云图、变形图及开裂图,并与理论分析结进行了比较。
During two cooling methods, whether tension stress or compression stress, the retained austenite in steel reduced with stress increasing, had become from massive to streak or filminess.
在两种冷却方式下,不论拉应力还是压应力的作用,使组织中残余奥氏体数量减少,形貌
无应力时的块状变为条状或薄膜状。
声明:以上例句、词性分类联网资源自动生成,部分未经过人工审核,其表达内容亦不代表本软件的观点;若发现问题,欢迎向我们指正。
The finite element models of axial tension member and eccentrical tension members are established with ANSYS finite element program.
4、用通用有限元分析软件ANSYS了混凝土轴心和偏心受拉的有限元模型,进行分析并得到了受拉构件的应力云图、
形图及开裂图,并与理论分析结
进行了比较。
During two cooling methods, whether tension stress or compression stress, the retained austenite in steel reduced with stress increasing, had become from massive to streak or filminess.
在两种冷却方式下,不论拉应力还是压应力的作用,均使组织中残余奥氏体数量减少,形貌由无应力时的为条
或薄膜
。
声明:以上例句、词性分类均由互联网资源自动生成,部分未经过人工审核,其表达内容亦不代表本软件的观点;若发现问题,欢迎向我们指正。
The finite element models of axial tension member and eccentrical tension members are established with ANSYS finite element program.
4、用通用有限元分析软件ANSYS建立了混凝土轴心和偏心受拉的有限元模型,进行分析并得到了受拉构件的应力云、
及开裂
,并与理论分析结
进行了比较。
During two cooling methods, whether tension stress or compression stress, the retained austenite in steel reduced with stress increasing, had become from massive to streak or filminess.
在两种冷却方,
论拉应力还是压应力的作用,均使组织中残余奥氏体数量减少,
貌由无应力时的块状
为条状或薄膜状。
声明:以上例句、词性分类均由互联网资源自动生成,部分未经过人工审核,其表达内容亦代表本软件的观点;若发现问题,欢迎向我们指正。
The finite element models of axial tension member and eccentrical tension members are established with ANSYS finite element program.
4、用通用有分析软件ANSYS建立了混凝土轴心和偏心受拉的有
型,进行分析并得到了受拉构件的应力云图、变形图及开裂图,并与理论分析结
进行了比较。
During two cooling methods, whether tension stress or compression stress, the retained austenite in steel reduced with stress increasing, had become from massive to streak or filminess.
在两种冷却方式下,不论拉应力还是压应力的作用,均使组织中残体数量减少,形貌由无应力时的块状变为条状或薄膜状。
声明:以上例句、词性分类均由互联网资源自动生成,部分未经过人工审核,其表达内容亦不代表本软件的观点;若发现问题,欢迎向我们指正。
The finite element models of axial tension member and eccentrical tension members are established with ANSYS finite element program.
4、用通用有限元软件ANSYS建立了混凝土轴心和偏心受拉的有限元模型,进行
并得到了受拉构件的应力云图、变形图及开裂图,并与理论
结
进行了比较。
During two cooling methods, whether tension stress or compression stress, the retained austenite in steel reduced with stress increasing, had become from massive to streak or filminess.
在两种冷却方式下,不论拉应力还是压应力的作用,均使组织中残余奥氏体数量减少,形貌由无应力时的块变
或薄膜
。
声明:以上例句、词性类均由互联网资源自动生成,部
未经过人工审核,其表达内容亦不代表本软件的观点;若发现问题,欢迎向我们指正。
The finite element models of axial tension member and eccentrical tension members are established with ANSYS finite element program.
4、用通用有元分析软件ANSYS建立了混凝土轴心和偏心受拉
有
元模型,进行分析并得到了受拉构件
应力云图、变形图及开裂图,并与理论分析结
进行了比较。
During two cooling methods, whether tension stress or compression stress, the retained austenite in steel reduced with stress increasing, had become from massive to streak or filminess.
在两种冷却方式下,不论拉应力还是压应力作用,均使组织中残余奥
量减少,形貌由无应力时
块状变为条状或薄膜状。
声明:以上例句、词性分类均由互联网资源自动生成,部分未经过人工审核,其表达内容亦不代表本软件观点;若发现问题,欢迎向我们指正。
The finite element models of axial tension member and eccentrical tension members are established with ANSYS finite element program.
4、用通用有限元分析软件ANSYS建立了混凝土轴心和偏心受拉的有限元模型,进行分析并得到了受拉构件的应力云图、变形图图,并与理论分析结
进行了比较。
During two cooling methods, whether tension stress or compression stress, the retained austenite in steel reduced with stress increasing, had become from massive to streak or filminess.
在两种式下,不论拉应力还是压应力的作用,均使组织中残余奥氏体数量减少,形貌由无应力时的块状变为条状或薄膜状。
声明:以上例句、词性分类均由互联网资源自动生成,部分未经过人工审核,其表达内容亦不代表本软件的观点;若发现问题,欢迎向我们指正。
The finite element models of axial tension member and eccentrical tension members are established with ANSYS finite element program.
4、用通用有限元软件ANSYS建立了混凝土轴心和偏心受拉的有限元模型,进行
并得到了受拉构件的应力云图、变形图及开裂图,并与理论
结
进行了比较。
During two cooling methods, whether tension stress or compression stress, the retained austenite in steel reduced with stress increasing, had become from massive to streak or filminess.
在两种冷却方式下,不论拉应力还是压应力的作用,均使组织中残余奥氏体数量减少,形貌由无应力时的块变
或薄膜
。
声明:以上例句、词性类均由互联网资源自动生成,部
未经过人工审核,其表达内容亦不代表本软件的观点;若发现问题,欢迎向我们指正。