Draw the plan on a grid.

用坐标方格画面图。

(8) The sketch map or ichnography on the location of the warehouse.

（八）仓库地理位置示意图及面图。

The shape of cross-section is an ellipse folded in half through one symmetry axis, and the axis keeps perpendicular with pinacoid-view.

断面形状为沿对称轴对折的椭圆，此对称轴始终垂直于轴截面，其方面图上的流道线无关。

In this paper, we study the minimum-weight feedback vertex set problem in outerplanar graphs and present a linear time algorithm to solve it.

本文主要考虑外面图的馈点集并给出了一个求外面图最小顶点权馈点集的线性时间算法。

On basis of this model, the modeling methods and modeling flow were discussed based on data source of geological observation, drillhole, ichnography and section map.

在此基础上，探讨了在基于地质观测数据、钻孔数据、面图数据、剖面图数据的断层建模方法和建模流程。

The drawing method for the double channel impeller is studied.It is found that there is an in-conformity between the dimensions of plane-view and pinacoid-view of fluid cross-section.

摘要研究了双流道污水泵叶轮常用的图纸表达方法，发现面图上的断面投影结果轴面图确定的断面形状尺寸不一致的问题。

Draw the plan on a grid.

方格画平面图。

(8) The sketch map or ichnography on the location of the warehouse.

（八）仓库地理位置示意图及平面图。

The shape of cross-section is an ellipse folded in half through one symmetry axis, and the axis keeps perpendicular with pinacoid-view.

断面形状为沿对称轴对折的椭圆，此对称轴始终垂直于轴截面，其方向与平面图上的流道线无关。

In this paper, we study the minimum-weight feedback vertex set problem in outerplanar graphs and present a linear time algorithm to solve it.

本文主要考虑外平面图的反馈点集并给出了一个求外平面图最小顶点赋权反馈点集的线性时间算法。

On basis of this model, the modeling methods and modeling flow were discussed based on data source of geological observation, drillhole, ichnography and section map.

在此基础上，探讨了在基于地质观测数据、钻孔数据、平面图数据、剖面图数据的断层方法流程。

The drawing method for the double channel impeller is studied.It is found that there is an in-conformity between the dimensions of plane-view and pinacoid-view of fluid cross-section.

摘要研究了双流道污水泵叶轮常的图纸表达方法，发现平面图上的断面投影结果与轴面图确定的断面形状尺寸不一致的问题。

Draw the plan on a grid.

用坐标方格画面图。

(8) The sketch map or ichnography on the location of the warehouse.

（八）仓库地理位置示意图及面图。

The shape of cross-section is an ellipse folded in half through one symmetry axis, and the axis keeps perpendicular with pinacoid-view.

断面形状为沿对称轴对折的椭圆，此对称轴始终垂直于轴截面，其方向与面图上的流道关。

In this paper, we study the minimum-weight feedback vertex set problem in outerplanar graphs and present a linear time algorithm to solve it.

本文主要考虑面图的反馈点集并给出了一个面图最小顶点赋权反馈点集的性时间算法。

On basis of this model, the modeling methods and modeling flow were discussed based on data source of geological observation, drillhole, ichnography and section map.

在此基础上，探讨了在基于地质观测数据、钻孔数据、面图数据、剖面图数据的断层建模方法和建模流程。

The drawing method for the double channel impeller is studied.It is found that there is an in-conformity between the dimensions of plane-view and pinacoid-view of fluid cross-section.

摘要研究了双流道污水泵叶轮常用的图纸表达方法，发现面图上的断面投影结果与轴面图确定的断面形状尺寸不一致的问题。

Draw the plan on a grid.

用坐标方格画平面图。

(8) The sketch map or ichnography on the location of the warehouse.

（八）仓库地理位置示意图及平面图。

The shape of cross-section is an ellipse folded in half through one symmetry axis, and the axis keeps perpendicular with pinacoid-view.

断面形状为沿对称轴对折的椭圆，此对称轴始终垂直于轴截面，其方向与平面图上的流道线无。

In this paper, we study the minimum-weight feedback vertex set problem in outerplanar graphs and present a linear time algorithm to solve it.

主要考虑外平面图的反馈点集并给出求外平面图最小顶点赋权反馈点集的线性时间算法。

On basis of this model, the modeling methods and modeling flow were discussed based on data source of geological observation, drillhole, ichnography and section map.

在此基础上，探讨在基于地质观测数据、钻孔数据、平面图数据、剖面图数据的断层建模方法和建模流程。

The drawing method for the double channel impeller is studied.It is found that there is an in-conformity between the dimensions of plane-view and pinacoid-view of fluid cross-section.

摘要研究双流道污水泵叶轮常用的图纸表达方法，发现平面图上的断面投影结果与轴面图确定的断面形状尺寸不致的问题。

Draw the plan on a grid.

用坐标方格画平图。

(8) The sketch map or ichnography on the location of the warehouse.

（八）仓库地理位置示意图及平图。

The shape of cross-section is an ellipse folded in half through one symmetry axis, and the axis keeps perpendicular with pinacoid-view.

状为沿对称轴对折的椭圆，此对称轴始终垂直于轴截，其方向与平图上的流道线无关。

In this paper, we study the minimum-weight feedback vertex set problem in outerplanar graphs and present a linear time algorithm to solve it.

本文主要考虑外平图的反馈点集并给出了一个求外平图最小顶点赋权反馈点集的线性时间算法。

On basis of this model, the modeling methods and modeling flow were discussed based on data source of geological observation, drillhole, ichnography and section map.

在此基础上，探讨了在基于地质观测、孔、平图、剖图的层建模方法和建模流程。

The drawing method for the double channel impeller is studied.It is found that there is an in-conformity between the dimensions of plane-view and pinacoid-view of fluid cross-section.

摘要研究了双流道污水泵叶轮常用的图纸表达方法，发现平图上的投影结果与轴图确定的状尺寸不一致的问题。

Draw the plan on a grid.

用坐标方格画平面图。

(8) The sketch map or ichnography on the location of the warehouse.

（八）仓库地理位置示意图及平面图。

The shape of cross-section is an ellipse folded in half through one symmetry axis, and the axis keeps perpendicular with pinacoid-view.

断面形状为沿折的椭圆，此始终垂直截面，其方向与平面图上的流道线无关。

In this paper, we study the minimum-weight feedback vertex set problem in outerplanar graphs and present a linear time algorithm to solve it.

本文主要考虑外平面图的反馈点集并给出了一个求外平面图最小顶点赋权反馈点集的线性时间算法。

On basis of this model, the modeling methods and modeling flow were discussed based on data source of geological observation, drillhole, ichnography and section map.

此础上，探讨了地质观测数据、钻孔数据、平面图数据、剖面图数据的断层建模方法和建模流程。

The drawing method for the double channel impeller is studied.It is found that there is an in-conformity between the dimensions of plane-view and pinacoid-view of fluid cross-section.

摘要研究了双流道污水泵叶轮常用的图纸表达方法，发现平面图上的断面投影结果与面图确定的断面形状尺寸不一致的问题。

Draw the plan on a grid.

用坐标方格画平面图。

(8) The sketch map or ichnography on the location of the warehouse.

（八）仓库地理位置示意图及平面图。

The shape of cross-section is an ellipse folded in half through one symmetry axis, and the axis keeps perpendicular with pinacoid-view.

断面形状为沿对称轴对折的椭圆，此对称轴始终轴截面，其方向与平面图上的流道线无关。

In this paper, we study the minimum-weight feedback vertex set problem in outerplanar graphs and present a linear time algorithm to solve it.

本文主要考虑外平面图的反馈点集并给出了一个求外平面图最小顶点赋权反馈点集的线算法。

On basis of this model, the modeling methods and modeling flow were discussed based on data source of geological observation, drillhole, ichnography and section map.

在此基础上，探讨了在基地质观测数据、钻孔数据、平面图数据、剖面图数据的断层建模方法和建模流程。

The drawing method for the double channel impeller is studied.It is found that there is an in-conformity between the dimensions of plane-view and pinacoid-view of fluid cross-section.

摘要研究了双流道污水泵叶轮常用的图纸表达方法，发现平面图上的断面投影结果与轴面图确定的断面形状尺寸不一致的问题。

Draw the plan on a grid.

用坐标方格画平图。

(8) The sketch map or ichnography on the location of the warehouse.

（八）仓库地理位置示意图及平图。

The shape of cross-section is an ellipse folded in half through one symmetry axis, and the axis keeps perpendicular with pinacoid-view.

断为沿对称轴对折的椭圆，此对称轴始终垂直于轴截，其方向与平图上的流道线无关。

In this paper, we study the minimum-weight feedback vertex set problem in outerplanar graphs and present a linear time algorithm to solve it.

本文主要考虑外平图的反馈点集并给出了一个求外平图最小顶点赋权反馈点集的线性时间算法。

On basis of this model, the modeling methods and modeling flow were discussed based on data source of geological observation, drillhole, ichnography and section map.

在此基础上，探讨了在基于地质观、钻孔、平图、剖图的断层建模方法和建模流程。

The drawing method for the double channel impeller is studied.It is found that there is an in-conformity between the dimensions of plane-view and pinacoid-view of fluid cross-section.

摘要研究了双流道污水泵叶轮常用的图纸表达方法，发现平图上的断投影结果与轴图确定的断尺寸不一致的问题。

Draw the plan on a grid.

用坐标格画平图。

(8) The sketch map or ichnography on the location of the warehouse.

（八）仓库地理位置示意图及平图。

The shape of cross-section is an ellipse folded in half through one symmetry axis, and the axis keeps perpendicular with pinacoid-view.

断形状为沿对称轴对折的椭圆，此对称轴始终垂直于轴截，向与平图上的流道线无关。

In this paper, we study the minimum-weight feedback vertex set problem in outerplanar graphs and present a linear time algorithm to solve it.

本文主要考虑外平图的反并给出了一个求外平图最小顶赋权反的线性时间算法。

On basis of this model, the modeling methods and modeling flow were discussed based on data source of geological observation, drillhole, ichnography and section map.

在此基础上，探讨了在基于地质观测数据、钻孔数据、平图数据、剖图数据的断层建模法和建模流程。

The drawing method for the double channel impeller is studied.It is found that there is an in-conformity between the dimensions of plane-view and pinacoid-view of fluid cross-section.

摘要研究了双流道污水泵叶轮常用的图纸表达法，发现平图上的断投影结果与轴图确定的断形状尺寸不一致的问题。