Scouring is essential, for it removes the natural grease in the fiber, the suint, dirt and dust.

洗涤工序是十必要的，因为昆工序可以除去纤维上的天然油脂、脂汗和尘土。

The article has described the structure and working principle of multiprocess composite die for automobile deafener closure.

介绍了汽车消声器隔板多工序冲压复模具的结构、工作原理。

The effect of sulphuring, vacuum treatment and soaking on the quality of candied apples was studied.

本文研究了苹果脯生产中护色、抽空处理、浸渍等关键工序对产品质量的影响。

Fully utilize of material atteched energy makes a rational tachnological process,take material potential energy in causticization process for example.

叙述苛化工序物料势能利用的能量计算过程、节能效果及一点体会。

Mazindol was synthesized by four steps from chlorobenzene and phthalic anhydride in an overall yield of 23.4%.

以氯苯和邻苯二甲酸酐为起始原料，经四步工序吲哚，总收率为23．4％。

This machine is applicable to samming process before the drying processing in the vacuum, shaving and splitting processing course.

本机适用于猪、牛、羊皮在真空干燥，削匀，剖层前的挤水工序。

Next on its trip to becoming a lumber product, the debarked log is evaluated by scanners with "electronic eyes".

为锯材产品之前的二道工序是，去皮原木由带电子眼的扫描仪进行评估。

Waste beer yeast polypeptides were made from waste beer yeast by bromidic hydrolyzation, separation, purification and dryness etc.

以啤酒废酵母为原料,经菠萝蛋白酶酶解、、化、干燥等工序制得啤酒废酵母活性肽。

The result shows that the microbe pollution of shrimp meat and headless and putamina and in grading is very serious.

去头、去壳挑腺肠和级工序中细菌的污染比较严重。

Increasing technological application and innovation in manufacturing industries result in more specialisation and distribution of processes on a global scale.

制造业日益增加科技和创新意念的应用，使工序更趋专门精细和散于全球。

The machine can be used with microprocess or controlled limistop motors or servc motors made in japan,South korea and china.

特别适用于缝制商标、口袋、袖子等工序，能惊醒高质量、高效率的缝纫作业。

Taking rotary screen stenciling as an example, stenciling technology in screening printing was interpreted, including the common defects and solutions.

介绍网印制版各工序的工艺特点,并以圆网为主要对象阐述了制版工艺,并析常见疵病的原因,提出解决方法。

VD and working procedure.Experiments showed that major of the LF step foreign inclusions are aluminium sesquioxide. spotted non-deforming inclusion and sulphuret.

VD及材工序现场取样.系统析了各工序中夹杂物的行为.特征.数量.变化历程及影响因素.实验结果表明.

Sulfide ores with BaSO4 as the main gangue , two kinds of slags , speiss and As-Cu alloy have been identified.

在还原熔炼中添加了砷矿物，冶炼的最终产品是砷铜金，还原熔炼产生的砷冰铜（黄渣）等副产品中的铜通过返料操作在冰铜熔炼工序得以回收。

The paper mainly introduces the construction process, the design point, the process control method and the construction organization of concatemer silo slip form.

重点叙述多联体筒仓滑模施工工艺流程、滑模设计要点、关键工序控制方法、施工组织方法。

The whole technological process all realize low temperature, photophobic, asepsis, dust free, even the fresh melon is carried out a factory treatment process.

整体工艺流程全部实现了低温、避光、无菌、无尘，就连鲜瓜的处理工序都实行了工厂化。

Through the design and application of auto-deslagging unit,it solves many problems occurred in manual deslagging and ensure pipe ends expansion procedure go on smoothly.

通过自动管端除渣机的设计与应用,解决人工除渣存在的诸多问题,保证了管端扩径工序的顺利进行。

The technique character of the baffle of inspirator was introduced.A feasible process plan was determined and the integral piercing blanking bending forming die was designed.

介绍了呼吸器挡板零件工艺特点,确定了理的工艺方案,设计1副落料、冲孔、压弯三道工序一次形的模具。

In the compression moulding technology, preheat and prepressing procedures are added to improve the flowability of the bond and physical and mechanical properties of the product.

在压缩模塑工艺中，增加预热、预压工序，提高粘剂的流动性和产品的物理机械性能。

This paper discusses basic concept and sort of filoplume, analyses the cause that infecting filoplume of cashmere yarn, and puts forward control measure in working procedure.

论述了毛羽的基本概念和类,对影响羊绒沙线毛羽的原因进行了析,并对细沙前后各工序提出了具体控制措施。

Scouring is essential, for it removes the natural grease in the fiber, the suint, dirt and dust.

洗涤工序是十分必要的，因为昆工序可以除去纤维上的天然油脂、脂汗和尘土。

The article has described the structure and working principle of multiprocess composite die for automobile deafener closure.

介绍了汽车消声器隔板多工序冲压复合模具的结构、工作原理。

The effect of sulphuring, vacuum treatment and soaking on the quality of candied apples was studied.

本文研究了苹果脯生产中护色、抽空处理、浸渍等关键工序对产品质量的影响。

Fully utilize of material atteched energy makes a rational tachnological process,take material potential energy in causticization process for example.

叙述苛化工序能利用的能量计算过程、节能效果及一点体会。

Mazindol was synthesized by four steps from chlorobenzene and phthalic anhydride in an overall yield of 23.4%.

以氯苯和邻苯二甲酸酐为起始原，经四步工序合成马吲哚，总收率为23．4％。

This machine is applicable to samming process before the drying processing in the vacuum, shaving and splitting processing course.

本机适用于猪、牛、羊皮在真空干燥，削匀，剖层前的挤水工序。

Next on its trip to becoming a lumber product, the debarked log is evaluated by scanners with "electronic eyes".

成为锯材产品之前的二道工序是，去皮原木由带电子眼的扫描仪进行评估。

Waste beer yeast polypeptides were made from waste beer yeast by bromidic hydrolyzation, separation, purification and dryness etc.

以啤酒废酵母为原,经菠萝蛋白酶酶解、分离、纯化、干燥等工序制得啤酒废酵母活性肽。

The result shows that the microbe pollution of shrimp meat and headless and putamina and in grading is very serious.

去头、去壳挑腺肠和分级工序中细菌的污染比较严重。

Increasing technological application and innovation in manufacturing industries result in more specialisation and distribution of processes on a global scale.

制业益增加科技和创新意念的应用，使工序更趋专门精细和分散于全球。

The machine can be used with microprocess or controlled limistop motors or servc motors made in japan,South korea and china.

特别适用于缝制商标、口袋、袖子等工序，能惊醒高质量、高效率的缝纫作业。

Taking rotary screen stenciling as an example, stenciling technology in screening printing was interpreted, including the common defects and solutions.

介绍网印制版各工序的工艺特点,并以圆网为主要对象阐述了制版工艺,并分析常见疵病的原因,提出解决方法。

VD and working procedure.Experiments showed that major of the LF step foreign inclusions are aluminium sesquioxide. spotted non-deforming inclusion and sulphuret.

VD及成材工序现场取样.系统分析了各工序中夹杂的行为.特征.数量.变化历程及影响因素.实验结果表明.

Sulfide ores with BaSO4 as the main gangue , two kinds of slags , speiss and As-Cu alloy have been identified.

在还原熔炼中添加了砷矿，冶炼的最终产品是砷铜合金，还原熔炼产生的砷冰铜（黄渣）等副产品中的铜通过返操作在冰铜熔炼工序得以回收。

The paper mainly introduces the construction process, the design point, the process control method and the construction organization of concatemer silo slip form.

重点叙述多联体筒仓滑模施工工艺流程、滑模设计要点、关键工序控制方法、施工组织方法。

The whole technological process all realize low temperature, photophobic, asepsis, dust free, even the fresh melon is carried out a factory treatment process.

整体工艺流程全部实现了低温、避光、无菌、无尘，就连鲜瓜的处理工序都实行了工厂化。

Through the design and application of auto-deslagging unit,it solves many problems occurred in manual deslagging and ensure pipe ends expansion procedure go on smoothly.

通过自动管端除渣机的设计与应用,解决人工除渣存在的诸多问题,保证了管端扩径工序的顺利进行。

The technique character of the baffle of inspirator was introduced.A feasible process plan was determined and the integral piercing blanking bending forming die was designed.

介绍了呼吸器挡板零件工艺特点,确定了合理的工艺方案,设计1副落、冲孔、压弯三道工序一次成形的模具。

In the compression moulding technology, preheat and prepressing procedures are added to improve the flowability of the bond and physical and mechanical properties of the product.

在压缩模塑工艺中，增加预热、预压工序，提高粘合剂的流动性和产品的理机械性能。

This paper discusses basic concept and sort of filoplume, analyses the cause that infecting filoplume of cashmere yarn, and puts forward control measure in working procedure.

论述了毛羽的基本概念和分类,对影响羊绒沙线毛羽的原因进行了分析,并对细沙前后各工序提出了具体控制措施。

Scouring is essential, for it removes the natural grease in the fiber, the suint, dirt and dust.

洗涤工序是十分必要的，因为昆工序可除去纤维上的天然油脂、脂汗和尘土。

The article has described the structure and working principle of multiprocess composite die for automobile deafener closure.

介绍了汽车消声器隔板多工序冲压复合模具的结构、工作原理。

The effect of sulphuring, vacuum treatment and soaking on the quality of candied apples was studied.

本文研究了苹果脯生产中护色、抽处理、浸渍等关键工序对产品质量的影响。

Fully utilize of material atteched energy makes a rational tachnological process,take material potential energy in causticization process for example.

叙述苛化工序物料势能利用的能量计算过程、节能效果及一点体会。

Mazindol was synthesized by four steps from chlorobenzene and phthalic anhydride in an overall yield of 23.4%.

氯苯和邻苯二甲酸酐为起始原料，经四步工序合成马吲哚，总收率为23．4％。

This machine is applicable to samming process before the drying processing in the vacuum, shaving and splitting processing course.

本机适用于猪、牛、羊皮干燥，削匀，剖层前的挤水工序。

Next on its trip to becoming a lumber product, the debarked log is evaluated by scanners with "electronic eyes".

成为锯材产品之前的二道工序是，去皮原木由带电子眼的扫描仪进行评。

Waste beer yeast polypeptides were made from waste beer yeast by bromidic hydrolyzation, separation, purification and dryness etc.

酒废酵母为原料,经菠萝蛋白酶酶解、分离、纯化、干燥等工序制得酒废酵母活性肽。

The result shows that the microbe pollution of shrimp meat and headless and putamina and in grading is very serious.

去头、去壳挑腺肠和分级工序中细菌的污染比较严重。

Increasing technological application and innovation in manufacturing industries result in more specialisation and distribution of processes on a global scale.

制造业日益增加科技和创新意念的应用，使工序更趋专门精细和分散于全球。

The machine can be used with microprocess or controlled limistop motors or servc motors made in japan,South korea and china.

特别适用于缝制商标、口袋、袖子等工序，能惊醒高质量、高效率的缝纫作业。

Taking rotary screen stenciling as an example, stenciling technology in screening printing was interpreted, including the common defects and solutions.

介绍网印制版各工序的工艺特点,并圆网为主要对象阐述了制版工艺,并分析常见疵病的原因,提出解决方法。

VD and working procedure.Experiments showed that major of the LF step foreign inclusions are aluminium sesquioxide. spotted non-deforming inclusion and sulphuret.

VD及成材工序现场取样.系统分析了各工序中夹杂物的行为.特征.数量.变化历程及影响因素.实验结果表明.

Sulfide ores with BaSO4 as the main gangue , two kinds of slags , speiss and As-Cu alloy have been identified.

还原熔炼中添加了砷矿物，冶炼的最终产品是砷铜合金，还原熔炼产生的砷冰铜（黄渣）等副产品中的铜通过返料操作冰铜熔炼工序得回收。

The paper mainly introduces the construction process, the design point, the process control method and the construction organization of concatemer silo slip form.

重点叙述多联体筒仓滑模施工工艺流程、滑模设计要点、关键工序控制方法、施工组织方法。

The whole technological process all realize low temperature, photophobic, asepsis, dust free, even the fresh melon is carried out a factory treatment process.

整体工艺流程全部实现了低温、避光、无菌、无尘，就连鲜瓜的处理工序都实行了工厂化。

Through the design and application of auto-deslagging unit,it solves many problems occurred in manual deslagging and ensure pipe ends expansion procedure go on smoothly.

通过自动管端除渣机的设计与应用,解决人工除渣存的诸多问题,保证了管端扩径工序的顺利进行。

The technique character of the baffle of inspirator was introduced.A feasible process plan was determined and the integral piercing blanking bending forming die was designed.

介绍了呼吸器挡板零件工艺特点,确定了合理的工艺方案,设计1副落料、冲孔、压弯三道工序一次成形的模具。

In the compression moulding technology, preheat and prepressing procedures are added to improve the flowability of the bond and physical and mechanical properties of the product.

压缩模塑工艺中，增加预热、预压工序，提高粘合剂的流动性和产品的物理机械性能。

This paper discusses basic concept and sort of filoplume, analyses the cause that infecting filoplume of cashmere yarn, and puts forward control measure in working procedure.

论述了毛羽的基本概念和分类,对影响羊绒沙线毛羽的原因进行了分析,并对细沙前后各工序提出了具体控制措施。

Scouring is essential, for it removes the natural grease in the fiber, the suint, dirt and dust.

洗涤是十分必要的，因为昆可以除去纤维上的天然油脂、脂汗和尘土。

The article has described the structure and working principle of multiprocess composite die for automobile deafener closure.

介绍了汽车消声器隔板多冲压复合模具的结构、作原理。

The effect of sulphuring, vacuum treatment and soaking on the quality of candied apples was studied.

本文研究了苹果脯生中护色、抽空处理、浸渍等关键品质量的影响。

Fully utilize of material atteched energy makes a rational tachnological process,take material potential energy in causticization process for example.

叙述苛化物料势能利的能量计算过程、节能效果及一点体会。

Mazindol was synthesized by four steps from chlorobenzene and phthalic anhydride in an overall yield of 23.4%.

以氯苯和邻苯二甲酸酐为起始原料，经四步合成马吲哚，总收率为23．4％。

This machine is applicable to samming process before the drying processing in the vacuum, shaving and splitting processing course.

本机适于猪、牛、羊皮在真空干燥，削匀，剖层前的挤水。

Next on its trip to becoming a lumber product, the debarked log is evaluated by scanners with "electronic eyes".

成为锯材品之前的二道是，去皮原木由带电子眼的扫描仪进行评估。

Waste beer yeast polypeptides were made from waste beer yeast by bromidic hydrolyzation, separation, purification and dryness etc.

以啤酒废酵母为原料,经菠萝蛋白酶酶解、分离、纯化、干燥等制得啤酒废酵母活性肽。

The result shows that the microbe pollution of shrimp meat and headless and putamina and in grading is very serious.

去头、去壳挑腺肠和分级中细菌的污染比较严重。

Increasing technological application and innovation in manufacturing industries result in more specialisation and distribution of processes on a global scale.

制造业日益增加科技和创新意念的应，更趋专门精细和分散于全球。

The machine can be used with microprocess or controlled limistop motors or servc motors made in japan,South korea and china.

特别适于缝制商标、口袋、袖子等，能惊醒高质量、高效率的缝纫作业。

Taking rotary screen stenciling as an example, stenciling technology in screening printing was interpreted, including the common defects and solutions.

介绍网印制版各的艺特点,并以圆网为主要象阐述了制版艺,并分析常见疵病的原因,提出解决方法。

VD and working procedure.Experiments showed that major of the LF step foreign inclusions are aluminium sesquioxide. spotted non-deforming inclusion and sulphuret.

VD及成材现场取样.系统分析了各中夹杂物的行为.特征.数量.变化历程及影响因素.实验结果表明.

Sulfide ores with BaSO4 as the main gangue , two kinds of slags , speiss and As-Cu alloy have been identified.

在还原熔炼中添加了砷矿物，冶炼的最终品是砷铜合金，还原熔炼生的砷冰铜（黄渣）等副品中的铜通过返料操作在冰铜熔炼得以回收。

The paper mainly introduces the construction process, the design point, the process control method and the construction organization of concatemer silo slip form.

重点叙述多联体筒仓滑模施艺流程、滑模设计要点、关键控制方法、施组织方法。

The whole technological process all realize low temperature, photophobic, asepsis, dust free, even the fresh melon is carried out a factory treatment process.

整体艺流程全部实现了低温、避光、无菌、无尘，就连鲜瓜的处理都实行了厂化。

Through the design and application of auto-deslagging unit,it solves many problems occurred in manual deslagging and ensure pipe ends expansion procedure go on smoothly.

通过自动管端除渣机的设计与应,解决人除渣存在的诸多问题,保证了管端扩径的顺利进行。

The technique character of the baffle of inspirator was introduced.A feasible process plan was determined and the integral piercing blanking bending forming die was designed.

介绍了呼吸器挡板零件艺特点,确定了合理的艺方案,设计1副落料、冲孔、压弯三道一次成形的模具。

In the compression moulding technology, preheat and prepressing procedures are added to improve the flowability of the bond and physical and mechanical properties of the product.

在压缩模塑艺中，增加预热、预压，提高粘合剂的流动性和品的物理机械性能。

This paper discusses basic concept and sort of filoplume, analyses the cause that infecting filoplume of cashmere yarn, and puts forward control measure in working procedure.

论述了毛羽的基本概念和分类,影响羊绒沙线毛羽的原因进行了分析,并细沙前后各提出了具体控制措施。

Scouring is essential, for it removes the natural grease in the fiber, the suint, dirt and dust.

洗涤序是十分必要，因为昆序可以除去纤维上天然油脂、脂汗和尘土。

The article has described the structure and working principle of multiprocess composite die for automobile deafener closure.

介绍了汽车消声器隔序冲压复合模具结构、作原理。

The effect of sulphuring, vacuum treatment and soaking on the quality of candied apples was studied.

本文研究了苹果脯生产中护色、抽空处理、浸渍等关键序对产品质量影响。

Fully utilize of material atteched energy makes a rational tachnological process,take material potential energy in causticization process for example.

叙述苛化序物料势能利用能量计算过程、节能效果及一点体会。

Mazindol was synthesized by four steps from chlorobenzene and phthalic anhydride in an overall yield of 23.4%.

以氯苯和邻苯二甲酸酐为起始原料，经四步序合成马吲哚，总收为23．4％。

This machine is applicable to samming process before the drying processing in the vacuum, shaving and splitting processing course.

本机适用于猪、牛、羊皮在真空干燥，削匀，剖层前挤水序。

Next on its trip to becoming a lumber product, the debarked log is evaluated by scanners with "electronic eyes".

成为锯材产品之前二道序是，去皮原木由带电子眼扫描仪进行评估。

Waste beer yeast polypeptides were made from waste beer yeast by bromidic hydrolyzation, separation, purification and dryness etc.

以啤酒废酵母为原料,经菠萝蛋白酶酶解、分离、纯化、干燥等序制得啤酒废酵母活性肽。

The result shows that the microbe pollution of shrimp meat and headless and putamina and in grading is very serious.

去头、去壳挑腺肠和分级序中细菌污染比较严重。

Increasing technological application and innovation in manufacturing industries result in more specialisation and distribution of processes on a global scale.

制造业日益增加科技和创新意念应用，使序更趋专门精细和分散于全球。

The machine can be used with microprocess or controlled limistop motors or servc motors made in japan,South korea and china.

特别适用于制商标、口袋、袖子等序，能惊醒高质量、高效纫作业。

Taking rotary screen stenciling as an example, stenciling technology in screening printing was interpreted, including the common defects and solutions.

介绍网印制版各序艺特点,并以圆网为主要对象阐述了制版艺,并分析常见疵病原因,提出解决方法。

VD and working procedure.Experiments showed that major of the LF step foreign inclusions are aluminium sesquioxide. spotted non-deforming inclusion and sulphuret.

VD及成材序现场取样.系统分析了各序中夹杂物行为.特征.数量.变化历程及影响因素.实验结果表明.

Sulfide ores with BaSO4 as the main gangue , two kinds of slags , speiss and As-Cu alloy have been identified.

在还原熔炼中添加了砷矿物，冶炼最终产品是砷铜合金，还原熔炼产生砷冰铜（黄渣）等副产品中铜通过返料操作在冰铜熔炼序得以回收。

The paper mainly introduces the construction process, the design point, the process control method and the construction organization of concatemer silo slip form.

重点叙述联体筒仓滑模施艺流程、滑模设计要点、关键序控制方法、施组织方法。

The whole technological process all realize low temperature, photophobic, asepsis, dust free, even the fresh melon is carried out a factory treatment process.

整体艺流程全部实现了低温、避光、无菌、无尘，就连鲜瓜处理序都实行了厂化。

Through the design and application of auto-deslagging unit,it solves many problems occurred in manual deslagging and ensure pipe ends expansion procedure go on smoothly.

通过自动管端除渣机设计与应用,解决人除渣存在诸问题,保证了管端扩径序顺利进行。

The technique character of the baffle of inspirator was introduced.A feasible process plan was determined and the integral piercing blanking bending forming die was designed.

介绍了呼吸器挡零件艺特点,确定了合理艺方案,设计1副落料、冲孔、压弯三道序一次成形模具。

In the compression moulding technology, preheat and prepressing procedures are added to improve the flowability of the bond and physical and mechanical properties of the product.

在压缩模塑艺中，增加预热、预压序，提高粘合剂流动性和产品物理机械性能。

This paper discusses basic concept and sort of filoplume, analyses the cause that infecting filoplume of cashmere yarn, and puts forward control measure in working procedure.

论述了毛羽基本概念和分类,对影响羊绒沙线毛羽原因进行了分析,并对细沙前后各序提出了具体控制措施。

Scouring is essential, for it removes the natural grease in the fiber, the suint, dirt and dust.

洗涤十分必要的，因为昆可以除去纤维上的天然油脂、脂汗和尘土。

The article has described the structure and working principle of multiprocess composite die for automobile deafener closure.

介绍了汽车消声器隔板多冲压复合模具的结构、作原理。

The effect of sulphuring, vacuum treatment and soaking on the quality of candied apples was studied.

本文研究了苹果脯生产中护色、抽空处理、浸渍等关键对产品质量的影响。

Fully utilize of material atteched energy makes a rational tachnological process,take material potential energy in causticization process for example.

叙述苛化物料势能利用的能量计算过程、节能效果及一点体会。

Mazindol was synthesized by four steps from chlorobenzene and phthalic anhydride in an overall yield of 23.4%.

以氯苯和邻苯二甲酸酐为起始原料，经四步合成马吲哚，总收率为23．4％。

This machine is applicable to samming process before the drying processing in the vacuum, shaving and splitting processing course.

本机适用于猪、牛、羊皮在真空干燥，削匀，剖层前的挤水。

Next on its trip to becoming a lumber product, the debarked log is evaluated by scanners with "electronic eyes".

成为锯材产品之前的二道，去皮原木由带电子眼的扫描仪进行评估。

Waste beer yeast polypeptides were made from waste beer yeast by bromidic hydrolyzation, separation, purification and dryness etc.

以啤酒废酵母为原料,经菠萝蛋白酶酶解、分离、纯化、干燥等制得啤酒废酵母活性肽。

The result shows that the microbe pollution of shrimp meat and headless and putamina and in grading is very serious.

去头、去壳挑腺肠和分级中细菌的污染比较严重。

Increasing technological application and innovation in manufacturing industries result in more specialisation and distribution of processes on a global scale.

制造业日益增加科技和创新意念的应用，使更趋专门精细和分散于全球。

The machine can be used with microprocess or controlled limistop motors or servc motors made in japan,South korea and china.

特别适用于缝制商标、口袋、袖子等，能惊醒高质量、高效率的缝纫作业。

Taking rotary screen stenciling as an example, stenciling technology in screening printing was interpreted, including the common defects and solutions.

介绍网印制版各的艺特点,并以圆网为主要对象阐述了制版艺,并分析病的原因,提出解决方法。

VD and working procedure.Experiments showed that major of the LF step foreign inclusions are aluminium sesquioxide. spotted non-deforming inclusion and sulphuret.

VD及成材现场取样.系统分析了各中夹杂物的行为.特征.数量.变化历程及影响因素.实验结果表明.

Sulfide ores with BaSO4 as the main gangue , two kinds of slags , speiss and As-Cu alloy have been identified.

在还原熔炼中添加了砷矿物，冶炼的最终产品砷铜合金，还原熔炼产生的砷冰铜（黄渣）等副产品中的铜通过返料操作在冰铜熔炼得以回收。

The paper mainly introduces the construction process, the design point, the process control method and the construction organization of concatemer silo slip form.

重点叙述多联体筒仓滑模施艺流程、滑模设计要点、关键控制方法、施组织方法。

The whole technological process all realize low temperature, photophobic, asepsis, dust free, even the fresh melon is carried out a factory treatment process.

整体艺流程全部实现了低温、避光、无菌、无尘，就连鲜瓜的处理都实行了厂化。

Through the design and application of auto-deslagging unit,it solves many problems occurred in manual deslagging and ensure pipe ends expansion procedure go on smoothly.

通过自动管端除渣机的设计与应用,解决人除渣存在的诸多问题,保证了管端扩径的顺利进行。

The technique character of the baffle of inspirator was introduced.A feasible process plan was determined and the integral piercing blanking bending forming die was designed.

介绍了呼吸器挡板零件艺特点,确定了合理的艺方案,设计1副落料、冲孔、压弯三道一次成形的模具。

In the compression moulding technology, preheat and prepressing procedures are added to improve the flowability of the bond and physical and mechanical properties of the product.

在压缩模塑艺中，增加预热、预压，提高粘合剂的流动性和产品的物理机械性能。

This paper discusses basic concept and sort of filoplume, analyses the cause that infecting filoplume of cashmere yarn, and puts forward control measure in working procedure.

论述了毛羽的基本概念和分类,对影响羊绒沙线毛羽的原因进行了分析,并对细沙前后各提出了具体控制措施。

Scouring is essential, for it removes the natural grease in the fiber, the suint, dirt and dust.

洗涤工序是十分必要的，因为昆工序可以除去纤维上的天然油脂、脂汗和尘土。

The article has described the structure and working principle of multiprocess composite die for automobile deafener closure.

介绍了汽车消声器隔板多工序冲压复合模具的结构、工作原理。

The effect of sulphuring, vacuum treatment and soaking on the quality of candied apples was studied.

本文研究了苹果脯生产中护色、抽处理、浸渍等关键工序对产品质量的影响。

Fully utilize of material atteched energy makes a rational tachnological process,take material potential energy in causticization process for example.

叙述苛化工序物料势能利用的能量计算过程、节能效果及一点体会。

Mazindol was synthesized by four steps from chlorobenzene and phthalic anhydride in an overall yield of 23.4%.

以氯苯和邻苯二甲酸酐为起始原料，经四步工序合成马吲哚，总收率为23．4％。

This machine is applicable to samming process before the drying processing in the vacuum, shaving and splitting processing course.

本机适用于猪、牛、羊皮在真，削匀，剖层前的挤水工序。

Next on its trip to becoming a lumber product, the debarked log is evaluated by scanners with "electronic eyes".

成为锯材产品之前的二道工序是，去皮原木由带电子眼的扫描仪进。

Waste beer yeast polypeptides were made from waste beer yeast by bromidic hydrolyzation, separation, purification and dryness etc.

以啤酒废酵母为原料,经菠萝蛋白酶酶解、分离、纯化、等工序制得啤酒废酵母活性肽。

The result shows that the microbe pollution of shrimp meat and headless and putamina and in grading is very serious.

去头、去壳挑腺肠和分级工序中细菌的污染比较严重。

Increasing technological application and innovation in manufacturing industries result in more specialisation and distribution of processes on a global scale.

制造业日益增加科技和创新意念的应用，使工序更趋专门精细和分散于全球。

The machine can be used with microprocess or controlled limistop motors or servc motors made in japan,South korea and china.

特别适用于缝制商标、口袋、袖子等工序，能惊醒高质量、高效率的缝纫作业。

Taking rotary screen stenciling as an example, stenciling technology in screening printing was interpreted, including the common defects and solutions.

介绍网印制版各工序的工艺特点,并以圆网为主要对象阐述了制版工艺,并分析常见疵病的原因,提出解决方法。

VD and working procedure.Experiments showed that major of the LF step foreign inclusions are aluminium sesquioxide. spotted non-deforming inclusion and sulphuret.

VD及成材工序现场取样.系统分析了各工序中夹杂物的为.特征.数量.变化历程及影响因素.实验结果表明.

Sulfide ores with BaSO4 as the main gangue , two kinds of slags , speiss and As-Cu alloy have been identified.

在还原熔炼中添加了砷矿物，冶炼的最终产品是砷铜合金，还原熔炼产生的砷冰铜（黄渣）等副产品中的铜通过返料操作在冰铜熔炼工序得以回收。

The paper mainly introduces the construction process, the design point, the process control method and the construction organization of concatemer silo slip form.

重点叙述多联体筒仓滑模施工工艺流程、滑模设计要点、关键工序控制方法、施工组织方法。

The whole technological process all realize low temperature, photophobic, asepsis, dust free, even the fresh melon is carried out a factory treatment process.

整体工艺流程全部实现了低温、避光、无菌、无尘，就连鲜瓜的处理工序都实了工厂化。

Through the design and application of auto-deslagging unit,it solves many problems occurred in manual deslagging and ensure pipe ends expansion procedure go on smoothly.

通过自动管端除渣机的设计与应用,解决人工除渣存在的诸多问题,保证了管端扩径工序的顺利进。

The technique character of the baffle of inspirator was introduced.A feasible process plan was determined and the integral piercing blanking bending forming die was designed.

介绍了呼吸器挡板零件工艺特点,确定了合理的工艺方案,设计1副落料、冲孔、压弯三道工序一次成形的模具。

In the compression moulding technology, preheat and prepressing procedures are added to improve the flowability of the bond and physical and mechanical properties of the product.

在压缩模塑工艺中，增加预热、预压工序，提高粘合剂的流动性和产品的物理机械性能。

This paper discusses basic concept and sort of filoplume, analyses the cause that infecting filoplume of cashmere yarn, and puts forward control measure in working procedure.

论述了毛羽的基本概念和分类,对影响羊绒沙线毛羽的原因进了分析,并对细沙前后各工序提出了具体控制措施。

Scouring is essential, for it removes the natural grease in the fiber, the suint, dirt and dust.

洗涤工是十分必要的，因为昆工可以除去纤维上的天然油脂、脂汗和尘土。

The article has described the structure and working principle of multiprocess composite die for automobile deafener closure.

介绍了汽车消声器隔板多工冲压复合模具的结构、工作原理。

The effect of sulphuring, vacuum treatment and soaking on the quality of candied apples was studied.

本文研究了苹果脯生产中护色、抽空处理、浸渍等关键工对产品质量的影响。

Fully utilize of material atteched energy makes a rational tachnological process,take material potential energy in causticization process for example.

叙述苛化工势能利用的能量计算过程、节能效果及一点体会。

Mazindol was synthesized by four steps from chlorobenzene and phthalic anhydride in an overall yield of 23.4%.

以氯苯和邻苯二甲酸酐为起始原，经四步工合成马吲哚，总收率为23．4％。

This machine is applicable to samming process before the drying processing in the vacuum, shaving and splitting processing course.

本机适用于猪、牛、羊皮在真空干燥，削匀，剖层前的挤水工。

Next on its trip to becoming a lumber product, the debarked log is evaluated by scanners with "electronic eyes".

成为锯材产品之前的二道工是，去皮原木由带电子眼的扫描仪进行评估。

Waste beer yeast polypeptides were made from waste beer yeast by bromidic hydrolyzation, separation, purification and dryness etc.

以啤酒废酵母为原,经菠萝蛋白酶酶解、分离、纯化、干燥等工制得啤酒废酵母活性肽。

The result shows that the microbe pollution of shrimp meat and headless and putamina and in grading is very serious.

去头、去壳挑腺肠和分级工中细菌的污染比较严重。

Increasing technological application and innovation in manufacturing industries result in more specialisation and distribution of processes on a global scale.

制造业增加科技和创新意念的应用，使工更趋专门精细和分散于全球。

The machine can be used with microprocess or controlled limistop motors or servc motors made in japan,South korea and china.

特别适用于缝制商标、口袋、袖子等工，能惊醒高质量、高效率的缝纫作业。

Taking rotary screen stenciling as an example, stenciling technology in screening printing was interpreted, including the common defects and solutions.

介绍网印制版各工的工艺特点,并以圆网为主要对象阐述了制版工艺,并分析常见疵病的原因,提出解决方法。

VD and working procedure.Experiments showed that major of the LF step foreign inclusions are aluminium sesquioxide. spotted non-deforming inclusion and sulphuret.

VD及成材工现场取样.系统分析了各工中夹杂的行为.特征.数量.变化历程及影响因素.实验结果表明.

Sulfide ores with BaSO4 as the main gangue , two kinds of slags , speiss and As-Cu alloy have been identified.

在还原熔炼中添加了砷矿，冶炼的最终产品是砷铜合金，还原熔炼产生的砷冰铜（黄渣）等副产品中的铜通过返操作在冰铜熔炼工得以回收。

The paper mainly introduces the construction process, the design point, the process control method and the construction organization of concatemer silo slip form.

重点叙述多联体筒仓滑模施工工艺流程、滑模设计要点、关键工控制方法、施工组织方法。

The whole technological process all realize low temperature, photophobic, asepsis, dust free, even the fresh melon is carried out a factory treatment process.

整体工艺流程全部实现了低温、避光、无菌、无尘，就连鲜瓜的处理工都实行了工厂化。

Through the design and application of auto-deslagging unit,it solves many problems occurred in manual deslagging and ensure pipe ends expansion procedure go on smoothly.

通过自动管端除渣机的设计与应用,解决人工除渣存在的诸多问题,保证了管端扩径工的顺利进行。

The technique character of the baffle of inspirator was introduced.A feasible process plan was determined and the integral piercing blanking bending forming die was designed.

介绍了呼吸器挡板零件工艺特点,确定了合理的工艺方案,设计1副落、冲孔、压弯三道工一次成形的模具。

In the compression moulding technology, preheat and prepressing procedures are added to improve the flowability of the bond and physical and mechanical properties of the product.

在压缩模塑工艺中，增加预热、预压工，提高粘合剂的流动性和产品的理机械性能。

This paper discusses basic concept and sort of filoplume, analyses the cause that infecting filoplume of cashmere yarn, and puts forward control measure in working procedure.

论述了毛羽的基本概念和分类,对影响羊绒沙线毛羽的原因进行了分析,并对细沙前后各工提出了具体控制措施。

Scouring is essential, for it removes the natural grease in the fiber, the suint, dirt and dust.

洗涤工序是十分必要的，因昆工序可以除去纤维上的天然油脂、脂汗和尘土。

The article has described the structure and working principle of multiprocess composite die for automobile deafener closure.

介绍了汽车消声器隔板多工序冲压复合模具的结构、工作原理。

The effect of sulphuring, vacuum treatment and soaking on the quality of candied apples was studied.

本文研究了苹果脯生产中护色、抽空处理、浸渍等关键工序对产品质量的影响。

Fully utilize of material atteched energy makes a rational tachnological process,take material potential energy in causticization process for example.

叙述苛化工序物料势能利用的能量计算过程、节能效果及一点体会。

Mazindol was synthesized by four steps from chlorobenzene and phthalic anhydride in an overall yield of 23.4%.

以氯苯和邻苯二甲起始原料，经四步工序合成马吲哚，总收率23．4％。

This machine is applicable to samming process before the drying processing in the vacuum, shaving and splitting processing course.

本机适用于猪、牛、羊皮在真空干燥，削匀，剖层前的挤水工序。

Next on its trip to becoming a lumber product, the debarked log is evaluated by scanners with "electronic eyes".

成锯材产品之前的二道工序是，去皮原木由带电子眼的扫描仪进行评估。

Waste beer yeast polypeptides were made from waste beer yeast by bromidic hydrolyzation, separation, purification and dryness etc.

以啤母原料,经菠萝蛋白酶酶解、分离、纯化、干燥等工序制得啤母活性肽。

The result shows that the microbe pollution of shrimp meat and headless and putamina and in grading is very serious.

去头、去壳挑腺肠和分级工序中细菌的污染比较严重。

Increasing technological application and innovation in manufacturing industries result in more specialisation and distribution of processes on a global scale.

制造业日益增加科技和创新意念的应用，使工序更趋专门精细和分散于全球。

The machine can be used with microprocess or controlled limistop motors or servc motors made in japan,South korea and china.

特别适用于缝制商标、口袋、袖子等工序，能惊醒高质量、高效率的缝纫作业。

Taking rotary screen stenciling as an example, stenciling technology in screening printing was interpreted, including the common defects and solutions.

介绍网印制版各工序的工艺特点,并以圆网主要对象阐述了制版工艺,并分析常见疵病的原因,提出解决方法。

VD and working procedure.Experiments showed that major of the LF step foreign inclusions are aluminium sesquioxide. spotted non-deforming inclusion and sulphuret.

VD及成材工序现场取样.系统分析了各工序中夹杂物的行.特征.数量.变化历程及影响因素.实验结果表明.

Sulfide ores with BaSO4 as the main gangue , two kinds of slags , speiss and As-Cu alloy have been identified.

在还原熔炼中添加了砷矿物，冶炼的最终产品是砷铜合金，还原熔炼产生的砷冰铜（黄渣）等副产品中的铜通过返料操作在冰铜熔炼工序得以回收。

The paper mainly introduces the construction process, the design point, the process control method and the construction organization of concatemer silo slip form.

重点叙述多联体筒仓滑模施工工艺流程、滑模设计要点、关键工序控制方法、施工组织方法。

The whole technological process all realize low temperature, photophobic, asepsis, dust free, even the fresh melon is carried out a factory treatment process.

整体工艺流程全部实现了低温、避光、无菌、无尘，就连鲜瓜的处理工序都实行了工厂化。

Through the design and application of auto-deslagging unit,it solves many problems occurred in manual deslagging and ensure pipe ends expansion procedure go on smoothly.

通过自动管端除渣机的设计与应用,解决人工除渣存在的诸多问题,保证了管端扩径工序的顺利进行。

The technique character of the baffle of inspirator was introduced.A feasible process plan was determined and the integral piercing blanking bending forming die was designed.

介绍了呼吸器挡板零件工艺特点,确定了合理的工艺方案,设计1副落料、冲孔、压弯三道工序一次成形的模具。

In the compression moulding technology, preheat and prepressing procedures are added to improve the flowability of the bond and physical and mechanical properties of the product.

在压缩模塑工艺中，增加预热、预压工序，提高粘合剂的流动性和产品的物理机械性能。

This paper discusses basic concept and sort of filoplume, analyses the cause that infecting filoplume of cashmere yarn, and puts forward control measure in working procedure.

论述了毛羽的基本概念和分类,对影响羊绒沙线毛羽的原因进行了分析,并对细沙前后各工序提出了具体控制措施。