Therefore, the stator and rotor and the vent was spinor into two parts.

因此，定子的不退、排气口被转子和旋子隔成两局。

PD015 series of horizontal stator hydropress is the press equipment specially used in pressing of motor stator into motor housing.

PD015系列卧式电机定子液压机是专门用于将电机定子压入电机外壳的压装设备。

Calculating formulas and derived process of main angles of stator coil colloidization model at bottom end of spherical coordinate are introduced.

本文介绍了定子线圈胶化模在球面坐标系下端主要角度的算公式以及程。

Besides the property of the asynchronous motor,the taper asynchronous motor can daff the detent easily,because magnetic force is generated when stator three-phrase windings connect to the electricity.

锥形异步电动机除具有一般异步电动机性能外,还因定子三相绕组接通电源时产生轴向磁拉力,可顺利开制动器,从而使锥形异步电动机正常运行。

According to the formation principle of the tritubercular cycloid in this paper, the rotor, whose bore curve is the inner envelope line of the cycloid, is made with the solid radius vector.

根据三尖摆线的形成原理,以摆线的内包络线为定子内腔曲线,动径实体化后作为转子,定子、转子按照一定关系运动则形成一种新型摆线泵。

Therefore, the stator and rotor and the vent was spinor into two parts.

因此，定子的不退、排气口被转子和旋子隔成两。

PD015 series of horizontal stator hydropress is the press equipment specially used in pressing of motor stator into motor housing.

PD015系列卧式电机定子液压机是专门用于将电机定子压入电机外壳的压装设备。

Calculating formulas and derived process of main angles of stator coil colloidization model at bottom end of spherical coordinate are introduced.

本文介绍了定子线圈胶化模在球面坐标系下端几主要角度的算公式以及推导过程。

Besides the property of the asynchronous motor,the taper asynchronous motor can daff the detent easily,because magnetic force is generated when stator three-phrase windings connect to the electricity.

步电动机除具有一般步电动机性能外,还因定子三相绕组接通电源时产生轴向磁拉力,可顺利推开制动器,从而使步电动机正常运行。

According to the formation principle of the tritubercular cycloid in this paper, the rotor, whose bore curve is the inner envelope line of the cycloid, is made with the solid radius vector.

根据三尖摆线的成原理,以摆线的内包络线为定子内腔曲线,动径实体化后作为转子,定子、转子按照一定关系运动则成一种新型摆线泵。

Therefore, the stator and rotor and the vent was spinor into two parts.

因此，定子的不退、排气口被转子和旋子隔成两个局部。

PD015 series of horizontal stator hydropress is the press equipment specially used in pressing of motor stator into motor housing.

PD015系列卧式电定子液压是专门用于将电定子压入电外壳的压装设备。

Calculating formulas and derived process of main angles of stator coil colloidization model at bottom end of spherical coordinate are introduced.

本文介绍了定子线圈胶球面坐标系下端部几个主要角度的算公式以及推导过程。

Besides the property of the asynchronous motor,the taper asynchronous motor can daff the detent easily,because magnetic force is generated when stator three-phrase windings connect to the electricity.

锥形异步电动有一般异步电动性能外,还因定子三相绕组接通电源时产生轴向磁拉力,可顺利推开制动器,从而使锥形异步电动正常运行。

According to the formation principle of the tritubercular cycloid in this paper, the rotor, whose bore curve is the inner envelope line of the cycloid, is made with the solid radius vector.

根据三尖摆线的形成原理,以摆线的内包络线为定子内腔曲线,动径实体后作为转子,定子、转子按照一定关系运动则形成一种新型摆线泵。

Therefore, the stator and rotor and the vent was spinor into two parts.

因此，定子的不退、排气口被转子和旋子隔成两个局部。

PD015 series of horizontal stator hydropress is the press equipment specially used in pressing of motor stator into motor housing.

PD015系列卧式机定子液压机是专门用机定子压入机外壳的压装设备。

Calculating formulas and derived process of main angles of stator coil colloidization model at bottom end of spherical coordinate are introduced.

本文介绍了定子线圈胶化模在球面坐标系下端部几个主要角度的算公式以及推导过程。

Besides the property of the asynchronous motor,the taper asynchronous motor can daff the detent easily,because magnetic force is generated when stator three-phrase windings connect to the electricity.

锥形异步动机除具有一般异步动机性能外,还因定子三相绕组接通源时向磁拉力,可顺利推开制动器,从而使锥形异步动机正常运行。

According to the formation principle of the tritubercular cycloid in this paper, the rotor, whose bore curve is the inner envelope line of the cycloid, is made with the solid radius vector.

根据三尖摆线的形成原理,以摆线的内包络线为定子内腔曲线,动径实体化后作为转子,定子、转子按照一定关系运动则形成一种新型摆线泵。

Therefore, the stator and rotor and the vent was spinor into two parts.

因此，定子的不退、排气口被转子和旋子隔成两个局部。

PD015 series of horizontal stator hydropress is the press equipment specially used in pressing of motor stator into motor housing.

PD015系列卧式电定子是专门用于将电定子入电外壳的装设备。

Calculating formulas and derived process of main angles of stator coil colloidization model at bottom end of spherical coordinate are introduced.

本文介绍了定子线圈胶化模在球面坐标系下端部几个主要角度的算公式以及推导过程。

Besides the property of the asynchronous motor,the taper asynchronous motor can daff the detent easily,because magnetic force is generated when stator three-phrase windings connect to the electricity.

锥形异步电动除具有一般异步电动性能外,还因定子三相绕组接通电源时产生轴向磁拉力,推开制动器,从而使锥形异步电动正常运行。

According to the formation principle of the tritubercular cycloid in this paper, the rotor, whose bore curve is the inner envelope line of the cycloid, is made with the solid radius vector.

根据三尖摆线的形成原理,以摆线的内包络线为定子内腔曲线,动径实体化后作为转子,定子、转子按照一定关系运动则形成一种新型摆线泵。

Therefore, the stator and rotor and the vent was spinor into two parts.

因此，定子的不退、排气口被转子和旋子隔成两个局部。

PD015 series of horizontal stator hydropress is the press equipment specially used in pressing of motor stator into motor housing.

PD015系列卧电机定子液压机是专门用于将电机定子压入电机外壳的压装设备。

Calculating formulas and derived process of main angles of stator coil colloidization model at bottom end of spherical coordinate are introduced.

本文介绍了定子线圈胶化模在球面坐标系下端部几个主的算及推导过程。

Besides the property of the asynchronous motor,the taper asynchronous motor can daff the detent easily,because magnetic force is generated when stator three-phrase windings connect to the electricity.

锥形异步电动机除具有一般异步电动机性能外,还因定子三相绕组接通电源时产生轴向磁拉力,可顺利推开制动器,从而使锥形异步电动机正常运行。

According to the formation principle of the tritubercular cycloid in this paper, the rotor, whose bore curve is the inner envelope line of the cycloid, is made with the solid radius vector.

根据三尖摆线的形成原理,摆线的内包络线为定子内腔曲线,动径实体化后作为转子,定子、转子按照一定关系运动则形成一种新型摆线泵。

Therefore, the stator and rotor and the vent was spinor into two parts.

因此，定子的不退、排气子和旋子隔成两个局部。

PD015 series of horizontal stator hydropress is the press equipment specially used in pressing of motor stator into motor housing.

PD015系列卧式电机定子液压机是专门用于将电机定子压入电机外壳的压装设备。

Calculating formulas and derived process of main angles of stator coil colloidization model at bottom end of spherical coordinate are introduced.

本文介绍了定子线圈胶化模在球面坐标系下端部几个主要角度的算公式以及推导过程。

Besides the property of the asynchronous motor,the taper asynchronous motor can daff the detent easily,because magnetic force is generated when stator three-phrase windings connect to the electricity.

锥形异步电动机除具有一般异步电动机性能外,还因定子三相绕组接通电源时产生轴向磁拉力,可顺利推开制动器,从而使锥形异步电动机正常运。

According to the formation principle of the tritubercular cycloid in this paper, the rotor, whose bore curve is the inner envelope line of the cycloid, is made with the solid radius vector.

三尖摆线的形成原理,以摆线的内包络线为定子内腔曲线,动径实体化后作为子,定子、子按照一定关系运动则形成一种新型摆线泵。

Therefore, the stator and rotor and the vent was spinor into two parts.

因此，定子的不退、排气口被转子和旋子隔成两个局。

PD015 series of horizontal stator hydropress is the press equipment specially used in pressing of motor stator into motor housing.

PD015系列卧式电机定子液压机是专门用于将电机定子压入电机外壳的压装设备。

Calculating formulas and derived process of main angles of stator coil colloidization model at bottom end of spherical coordinate are introduced.

本文介绍了定子线圈胶化模在球面坐标系几个主要角度的算公式以及推导。

Besides the property of the asynchronous motor,the taper asynchronous motor can daff the detent easily,because magnetic force is generated when stator three-phrase windings connect to the electricity.

形异步电动机除具有一般异步电动机性能外,还因定子三相绕组接通电源时产生轴向磁拉力,可顺利推开制动器,从而使形异步电动机正常运行。

According to the formation principle of the tritubercular cycloid in this paper, the rotor, whose bore curve is the inner envelope line of the cycloid, is made with the solid radius vector.

根据三尖摆线的形成原理,以摆线的内包络线为定子内腔曲线,动径实体化后作为转子,定子、转子按照一定关系运动则形成一种新型摆线泵。

Therefore, the stator and rotor and the vent was spinor into two parts.

因此，的不退、排气口被转和旋隔成两个局部。

PD015 series of horizontal stator hydropress is the press equipment specially used in pressing of motor stator into motor housing.

PD015系列卧式电机液压机是专门用于将电机压入电机外壳的压装设备。

Calculating formulas and derived process of main angles of stator coil colloidization model at bottom end of spherical coordinate are introduced.

本文介绍了圈胶化模在球面坐标系下端部几个主要角度的算公式以及推导过程。

Besides the property of the asynchronous motor,the taper asynchronous motor can daff the detent easily,because magnetic force is generated when stator three-phrase windings connect to the electricity.

锥形电动机除具有一电动机性能外,还因三相绕组接通电源时产生轴向磁拉力,可顺利推开制动器,从而使锥形电动机正常运行。

According to the formation principle of the tritubercular cycloid in this paper, the rotor, whose bore curve is the inner envelope line of the cycloid, is made with the solid radius vector.

根据三尖摆的形成原理,以摆的内包络为内腔曲,动径实体化后作为转,、转按照一关系运动则形成一种新型摆泵。

Therefore, the stator and rotor and the vent was spinor into two parts.

因此，定子的不退、排气口被转子和旋子隔成两个局部。

PD015 series of horizontal stator hydropress is the press equipment specially used in pressing of motor stator into motor housing.

PD015系列卧式电机定子液压机是专于将电机定子压入电机外壳的压装设备。

Calculating formulas and derived process of main angles of stator coil colloidization model at bottom end of spherical coordinate are introduced.

本文介绍了定子线圈胶化模在球面坐标系下端部几个主要角度的算公式以及推导过程。

Besides the property of the asynchronous motor,the taper asynchronous motor can daff the detent easily,because magnetic force is generated when stator three-phrase windings connect to the electricity.

锥形异步电动机除具有一般异步电动机性能外,还因定子三相绕组接通电源时产生轴力,可顺利推开制动器,从而使锥形异步电动机正常运行。

According to the formation principle of the tritubercular cycloid in this paper, the rotor, whose bore curve is the inner envelope line of the cycloid, is made with the solid radius vector.

根据三尖摆线的形成原理,以摆线的内包络线为定子内腔曲线,动径实体化后作为转子,定子、转子按照一定关系运动则形成一种新型摆线泵。