The foundation bolt of conticaster steel ladle revolving table is the most critical part to the equipment.

连铸钢包台的栓,是设备上最为关键的部位。

Based on the analysis of rotary valve feeding apparatus of defibrator,a design method about double rotary valve feeding device was obtained.

在分析现有热磨阀进料装置的基础上，提出了双作用阀进料装置的设计思路。

The article describes the setting-up and optimalization of the process parameters for the twohigh rotary pipe sizer employed by the 170 Seamless Steel Tube Plant,Daye Special Steel Corp.Ltd.

介绍了大冶特殊钢股份有限公司170无缝钢管厂二辊定径工艺数的选择和优化情况。

Abstract Aiming at the oversteering trend of a SUV prototype in the steady circular test with full load, a virtual prototype of the vehicle was built using MSC.

摘要 针对某SUV样车满载稳态试验中出现的过度向趋势问题，应用MSC.

In this paper, we theoretically demonstrate the Gyrator is a kind of transmission element, and it has behaviour to gyrate impe-dandce.Finally, we find that the Gyrator is realized by Hall effect.

本文从理论上论证器是一种具有阻抗性能的传输元件,可用霍尔效应实现器。

To control stepping motors, the balance bridge power drive circuit is made up by TDA1521 integrated audio power amplifier, the pulse allotter is made up by the parallel ports of computer and latches.

双构的步进电控制电路由TDA1521音频集成功率放大器组成平衡桥式功率驱动电路，由计算并行口经过锁存器构成脉冲分配器。

The foundation bolt of conticaster steel ladle revolving table is the most critical part to the equipment.

铸钢包回转台的地脚螺栓,是设备上最为关键的部位。

Based on the analysis of rotary valve feeding apparatus of defibrator,a design method about double rotary valve feeding device was obtained.

在分析现有热磨机回转阀进料装置的基础上，提出了双作用回转阀进料装置的设计思路。

The article describes the setting-up and optimalization of the process parameters for the twohigh rotary pipe sizer employed by the 170 Seamless Steel Tube Plant,Daye Special Steel Corp.Ltd.

介绍了大冶特殊钢股份有限公司170无缝钢管厂二辊回转定径机工艺数的选择和优化情况。

Abstract Aiming at the oversteering trend of a SUV prototype in the steady circular test with full load, a virtual prototype of the vehicle was built using MSC.

摘要 针对某SUV样车满载稳态回转试验中出现的过度转向趋势问题，应用MSC.

In this paper, we theoretically demonstrate the Gyrator is a kind of transmission element, and it has behaviour to gyrate impe-dandce.Finally, we find that the Gyrator is realized by Hall effect.

本文从理论上论证回转器是一种具有回转阻抗性能的传输元件,可用霍尔效应实现回转器。

To control stepping motors, the balance bridge power drive circuit is made up by TDA1521 integrated audio power amplifier, the pulse allotter is made up by the parallel ports of computer and latches.

双回转机构的步进机控路由TDA1521音频集成功率放大器组成平衡桥式功率驱动路，由计算机并行口经过锁存器构成脉冲分配器。

The foundation bolt of conticaster steel ladle revolving table is the most critical part to the equipment.

连铸钢包回转台地脚螺栓,是设备上最为部位。

Based on the analysis of rotary valve feeding apparatus of defibrator,a design method about double rotary valve feeding device was obtained.

在分析现有热磨机回转阀进料装置基础上，提出了双作用回转阀进料装置设计思路。

The article describes the setting-up and optimalization of the process parameters for the twohigh rotary pipe sizer employed by the 170 Seamless Steel Tube Plant,Daye Special Steel Corp.Ltd.

介绍了大冶特殊钢股份有限公司170无缝钢管厂二辊回转定径机工艺数选择和优化情况。

Abstract Aiming at the oversteering trend of a SUV prototype in the steady circular test with full load, a virtual prototype of the vehicle was built using MSC.

摘要 针对某SUV样车满载稳态回转试验中出现过度转向趋势问题，应用MSC.

In this paper, we theoretically demonstrate the Gyrator is a kind of transmission element, and it has behaviour to gyrate impe-dandce.Finally, we find that the Gyrator is realized by Hall effect.

本文从理论上论证回转器是一种具有回转阻抗性能传输元件,可用应实现回转器。

To control stepping motors, the balance bridge power drive circuit is made up by TDA1521 integrated audio power amplifier, the pulse allotter is made up by the parallel ports of computer and latches.

双回转机构步进电机控制电路由TDA1521音频集成功率放大器组成平衡桥式功率驱动电路，由计算机并行口经过锁存器构成脉冲分配器。

The foundation bolt of conticaster steel ladle revolving table is the most critical part to the equipment.

连铸钢包回转台地脚螺栓,是设备上最为部位。

Based on the analysis of rotary valve feeding apparatus of defibrator,a design method about double rotary valve feeding device was obtained.

在分析现有热磨机回转阀进料装置基础上，提出了双作用回转阀进料装置设计思路。

The article describes the setting-up and optimalization of the process parameters for the twohigh rotary pipe sizer employed by the 170 Seamless Steel Tube Plant,Daye Special Steel Corp.Ltd.

介绍了大冶特殊钢股份有限公司170无缝钢管厂二辊回转定径机工艺数选择和优化情况。

Abstract Aiming at the oversteering trend of a SUV prototype in the steady circular test with full load, a virtual prototype of the vehicle was built using MSC.

摘要 针对某SUV样车满载稳态回转试验中出现过度转向趋势问题，应用MSC.

In this paper, we theoretically demonstrate the Gyrator is a kind of transmission element, and it has behaviour to gyrate impe-dandce.Finally, we find that the Gyrator is realized by Hall effect.

本文从理论上论证回转器是一种具有回转阻抗性能传输元件,可用应实现回转器。

To control stepping motors, the balance bridge power drive circuit is made up by TDA1521 integrated audio power amplifier, the pulse allotter is made up by the parallel ports of computer and latches.

双回转机构步进电机控制电路由TDA1521音频集成功率放大器组成平衡桥式功率驱动电路，由计算机并行口经过锁存器构成脉冲分配器。

The foundation bolt of conticaster steel ladle revolving table is the most critical part to the equipment.

连铸钢包回转台的地脚螺栓,是设备上最的部位。

Based on the analysis of rotary valve feeding apparatus of defibrator,a design method about double rotary valve feeding device was obtained.

在分析现有热磨机回转阀进料装置的基础上，提出了双作用回转阀进料装置的设计思路。

The article describes the setting-up and optimalization of the process parameters for the twohigh rotary pipe sizer employed by the 170 Seamless Steel Tube Plant,Daye Special Steel Corp.Ltd.

介绍了大冶特殊钢股份有限公司170无缝钢管厂二辊回转定径机工艺数的选择和优化情况。

Abstract Aiming at the oversteering trend of a SUV prototype in the steady circular test with full load, a virtual prototype of the vehicle was built using MSC.

摘要 针对某SUV样车满载稳态回转试验中出现的过度转向趋势问题，用MSC.

In this paper, we theoretically demonstrate the Gyrator is a kind of transmission element, and it has behaviour to gyrate impe-dandce.Finally, we find that the Gyrator is realized by Hall effect.

本文从理论上论证回转器是一种具有回转阻抗性能的传输元件,可用霍实现回转器。

To control stepping motors, the balance bridge power drive circuit is made up by TDA1521 integrated audio power amplifier, the pulse allotter is made up by the parallel ports of computer and latches.

双回转机构的步进电机控制电路由TDA1521音频集成功率放大器组成平衡桥式功率驱动电路，由计算机并行口经过锁存器构成脉冲分配器。

The foundation bolt of conticaster steel ladle revolving table is the most critical part to the equipment.

连铸钢包回转台的地脚螺栓,是设备上最为关键的部位。

Based on the analysis of rotary valve feeding apparatus of defibrator,a design method about double rotary valve feeding device was obtained.

在分析现有热磨机回转阀进料装置的基础上，提出了双作用回转阀进料装置的设计思路。

The article describes the setting-up and optimalization of the process parameters for the twohigh rotary pipe sizer employed by the 170 Seamless Steel Tube Plant,Daye Special Steel Corp.Ltd.

介绍了大冶特殊钢股份有限公司170无缝钢管厂二辊回转定径机工艺数的选择和优化情况。

Abstract Aiming at the oversteering trend of a SUV prototype in the steady circular test with full load, a virtual prototype of the vehicle was built using MSC.

摘要 针对某SUV样车满载稳态回转试验中出现的过度转向趋势问题，应用MSC.

In this paper, we theoretically demonstrate the Gyrator is a kind of transmission element, and it has behaviour to gyrate impe-dandce.Finally, we find that the Gyrator is realized by Hall effect.

本文从理论上论证回转器是一种具有回转阻抗性能的传输元件,可用霍尔效应实现回转器。

To control stepping motors, the balance bridge power drive circuit is made up by TDA1521 integrated audio power amplifier, the pulse allotter is made up by the parallel ports of computer and latches.

双回转机构的步进电机控制电路由TDA1521音频集成大器组成平衡桥式驱动电路，由计算机并行口经过锁存器构成脉冲分配器。

The foundation bolt of conticaster steel ladle revolving table is the most critical part to the equipment.

连铸钢包回台的地脚螺栓,是设备上最为关键的部位。

Based on the analysis of rotary valve feeding apparatus of defibrator,a design method about double rotary valve feeding device was obtained.

在分析现有热磨机回阀进料装置的基础上，提出了双作用回阀进料装置的设计思路。

The article describes the setting-up and optimalization of the process parameters for the twohigh rotary pipe sizer employed by the 170 Seamless Steel Tube Plant,Daye Special Steel Corp.Ltd.

介绍了大冶特殊钢股份有限公司170无缝钢管厂二辊回机工艺数的选化情况。

Abstract Aiming at the oversteering trend of a SUV prototype in the steady circular test with full load, a virtual prototype of the vehicle was built using MSC.

摘要 针对某SUV样车满载稳态回试验中出现的过度向趋势问题，应用MSC.

In this paper, we theoretically demonstrate the Gyrator is a kind of transmission element, and it has behaviour to gyrate impe-dandce.Finally, we find that the Gyrator is realized by Hall effect.

本文从理论上论证回器是一种具有回阻抗性能的传输元件,可用霍尔效应实现回器。

To control stepping motors, the balance bridge power drive circuit is made up by TDA1521 integrated audio power amplifier, the pulse allotter is made up by the parallel ports of computer and latches.

双回机构的步进电机控制电路由TDA1521音频集成功率放大器组成平衡桥式功率驱动电路，由计算机并行口经过锁存器构成脉冲分配器。

The foundation bolt of conticaster steel ladle revolving table is the most critical part to the equipment.

连铸钢包转台的地脚螺栓,是设备最为关键的部位。

Based on the analysis of rotary valve feeding apparatus of defibrator,a design method about double rotary valve feeding device was obtained.

在分析现有热磨机转阀进料装置的基础，了双作用转阀进料装置的设计思路。

The article describes the setting-up and optimalization of the process parameters for the twohigh rotary pipe sizer employed by the 170 Seamless Steel Tube Plant,Daye Special Steel Corp.Ltd.

介绍了大冶特殊钢股份有限公司170无缝钢管厂二辊转定径机工艺数的选择和优化情况。

Abstract Aiming at the oversteering trend of a SUV prototype in the steady circular test with full load, a virtual prototype of the vehicle was built using MSC.

摘要 针对某SUV样车满载稳态转试验中现的过度转向趋势问题，应用MSC.

In this paper, we theoretically demonstrate the Gyrator is a kind of transmission element, and it has behaviour to gyrate impe-dandce.Finally, we find that the Gyrator is realized by Hall effect.

本文从理转器是一种具有转阻抗性能的传输元件,可用霍尔效应实现转器。

To control stepping motors, the balance bridge power drive circuit is made up by TDA1521 integrated audio power amplifier, the pulse allotter is made up by the parallel ports of computer and latches.

双转机构的步进电机控制电路由TDA1521音频集成功率放大器组成平衡桥式功率驱动电路，由计算机并行口经过锁存器构成脉冲分配器。

The foundation bolt of conticaster steel ladle revolving table is the most critical part to the equipment.

连铸钢包回转台的地脚螺栓,是设备最为关键的部位。

Based on the analysis of rotary valve feeding apparatus of defibrator,a design method about double rotary valve feeding device was obtained.

在分析现有热磨机回转阀进料装置的基础，提作用回转阀进料装置的设计思路。

The article describes the setting-up and optimalization of the process parameters for the twohigh rotary pipe sizer employed by the 170 Seamless Steel Tube Plant,Daye Special Steel Corp.Ltd.

介绍大冶特殊钢股份有限公司170无缝钢管厂二辊回转定径机工艺数的选择和优化情况。

Abstract Aiming at the oversteering trend of a SUV prototype in the steady circular test with full load, a virtual prototype of the vehicle was built using MSC.

摘要 针对某SUV样车满载稳态回转试验中现的过度转向趋势问题，应用MSC.

In this paper, we theoretically demonstrate the Gyrator is a kind of transmission element, and it has behaviour to gyrate impe-dandce.Finally, we find that the Gyrator is realized by Hall effect.

本文从理证回转器是一种具有回转阻抗性能的传输元件,可用霍尔效应实现回转器。

To control stepping motors, the balance bridge power drive circuit is made up by TDA1521 integrated audio power amplifier, the pulse allotter is made up by the parallel ports of computer and latches.

回转机构的步进电机控制电路由TDA1521音频集成功率放大器组成平衡桥式功率驱动电路，由计算机并行口经过锁存器构成脉冲分配器。