Using PMK programing controler simulates of the process control system and corrects parameter of controler in extractive tower.

利用PMK可编程调节实现过程控制系统仿真,并调节进行参数整定。

A new clue for architectural CAD and software design is proposed during the developing procedure, which is called three-moduler-in-one method.

在系统研制中，提出并实现了集建筑建模-结构-仿真演示于一体三一体化建筑工程辅助设计和软件开发思路。

Finally, the optimization quantity of spare parts following exponential distribution are calculated with both this method and analysable method.The two results fit well.

最后利用一个指数布实例解方法和仿真方法计算出结果进行比较，从而所提出仿真方法进行了检验。

As the most important component of automobilism simulator, the newgenerated real-time visual system is a completely new visual simulation and scene management system.

作为汽车驾驶模重要组成部，汽车驾驶模新一代实时视景系统是一个全新视景仿真和场景管理系统。

Computer simulation demonstrate that the proposed algorithm can adapt to the identification of several different kinds of fabric as woven, stockinet, damask and mesh fabric.

通过机织布、针织布、斜纹布和网眼布等不同种类织物仿真验证了该算法有效性和适应性。

In order to adapt to real time simulation, the nodes of system and the predigestion was made according to the characteristic of reactor coolant system which will be simulated.

本论文针要仿真冷却剂系统特点，系统进行了节点划，并做了适当简化，以使其适应实时仿真需要。

The dynamic equation of the transient response in a cracked rotor system was modelled, the numerical simulation solutions of the uncracked rotor and the cracked rotor were obtained.

摘要基于建立裂纹转子瞬态回应动力学模型，得到了有无裂纹转子数值仿真解。

The effect of the mesh density, the change of dynamic plasticity property of mild steel with strain rate and the spotweld mechanical property on the simulation results is analyzed.

了网格密度、身用低碳钢材料塑性特性随应变率变化及焊点力学特性因素仿真结果影响。

Using PMK programing controler simulates of the process control system and corrects parameter of controler in extractive tower.

利用PMK可编程调节器实现过程控制的仿真,并调节器进行参数。

A new clue for architectural CAD and software design is proposed during the developing procedure, which is called three-moduler-in-one method.

研制中，提出并实现了集建筑建模器-结构分析器-仿真演示器于一体的三器一体化的建筑工程辅助设计和软件开发思路。

Finally, the optimization quantity of spare parts following exponential distribution are calculated with both this method and analysable method.The two results fit well.

最后利用一个指数分布实例解析方法和仿真方法计算出的结果进行比较，从而所提出的仿真方法进行了检验。

As the most important component of automobilism simulator, the newgenerated real-time visual system is a completely new visual simulation and scene management system.

作为汽车驾驶模拟器的重要组成部分，汽车驾驶模拟器新一代实时视是一个全新的视仿真和场管理。

Computer simulation demonstrate that the proposed algorithm can adapt to the identification of several different kinds of fabric as woven, stockinet, damask and mesh fabric.

通过机织布、针织布、斜纹布和网眼布等不同种类织物的仿真验证了该算法的有效性和适应性。

In order to adapt to real time simulation, the nodes of system and the predigestion was made according to the characteristic of reactor coolant system which will be simulated.

本论文针要仿真的冷却剂的特点，进行了节点划分，并做了适当简化，以使其适应实时仿真的需要。

The dynamic equation of the transient response in a cracked rotor system was modelled, the numerical simulation solutions of the uncracked rotor and the cracked rotor were obtained.

摘要基于建立的裂纹转子瞬态回应动力学模型，得到了有无裂纹转子的数值仿真解。

The effect of the mesh density, the change of dynamic plasticity property of mild steel with strain rate and the spotweld mechanical property on the simulation results is analyzed.

分析了网格密度、身用低碳钢材料塑性特性随应变率的变化及焊点力学特性因素仿真结果的影响。

Using PMK programing controler simulates of the process control system and corrects parameter of controler in extractive tower.

利用PMK可编程调节器实现过程控制系统的仿真,并调节器进行参数整定。

A new clue for architectural CAD and software design is proposed during the developing procedure, which is called three-moduler-in-one method.

在系统研制中，提出并实现了集建筑建模器-结构分析器-仿真演示器于一体的三器一体化的建筑工程辅助设计和软件开发思路。

Finally, the optimization quantity of spare parts following exponential distribution are calculated with both this method and analysable method.The two results fit well.

最后利用一个指数分布实例解析方法和仿真方法计算出的结果进行比较，从而所提出的仿真方法进行了检验。

As the most important component of automobilism simulator, the newgenerated real-time visual system is a completely new visual simulation and scene management system.

作为汽车驾驶模拟器的重要组成部分，汽车驾驶模拟器新一代实时视景系统是一个全新的视景仿真和场景管理系统。

Computer simulation demonstrate that the proposed algorithm can adapt to the identification of several different kinds of fabric as woven, stockinet, damask and mesh fabric.

通过机织布、针织布、斜纹布和网眼布等类织物的仿真验证了该算法的有效性和适应性。

In order to adapt to real time simulation, the nodes of system and the predigestion was made according to the characteristic of reactor coolant system which will be simulated.

本论文针要仿真的冷却剂系统的特点，系统进行了节点划分，并做了适当简化，以使其适应实时仿真的需要。

The dynamic equation of the transient response in a cracked rotor system was modelled, the numerical simulation solutions of the uncracked rotor and the cracked rotor were obtained.

摘要基于建立的裂纹转子瞬态回应动力学模型，得到了有无裂纹转子的数值仿真解。

The effect of the mesh density, the change of dynamic plasticity property of mild steel with strain rate and the spotweld mechanical property on the simulation results is analyzed.

分析了网格密度、身用低碳钢材料塑性特性随应变率的变化及焊点力学特性因素仿真结果的影响。

Using PMK programing controler simulates of the process control system and corrects parameter of controler in extractive tower.

利用PMK可编程调节器实过程控制系统的仿真,并调节器进行参数整定。

A new clue for architectural CAD and software design is proposed during the developing procedure, which is called three-moduler-in-one method.

在系统研制中，提出并实建筑建模器-结构分析器-仿真演示器于一体的三器一体化的建筑工程辅助设计和软件开发思路。

Finally, the optimization quantity of spare parts following exponential distribution are calculated with both this method and analysable method.The two results fit well.

最后利用一个指数分布实例解析方法和仿真方法计算出的结果进行比较，从而所提出的仿真方法进行检验。

As the most important component of automobilism simulator, the newgenerated real-time visual system is a completely new visual simulation and scene management system.

作为汽模拟器的重要组成部分，汽模拟器新一代实时视景系统是一个全新的视景仿真和场景管理系统。

Computer simulation demonstrate that the proposed algorithm can adapt to the identification of several different kinds of fabric as woven, stockinet, damask and mesh fabric.

通过机织布、针织布、斜纹布和网眼布等不同种类织物的仿真验证该算法的有效性和适应性。

In order to adapt to real time simulation, the nodes of system and the predigestion was made according to the characteristic of reactor coolant system which will be simulated.

本论文针要仿真的冷却剂系统的特点，系统进行节点划分，并做适当简化，以使其适应实时仿真的需要。

The dynamic equation of the transient response in a cracked rotor system was modelled, the numerical simulation solutions of the uncracked rotor and the cracked rotor were obtained.

摘要基于建立的裂纹转子瞬态回应动力学模型，得到有无裂纹转子的数值仿真解。

The effect of the mesh density, the change of dynamic plasticity property of mild steel with strain rate and the spotweld mechanical property on the simulation results is analyzed.

分析网格密度、身用低碳钢材料塑性特性随应变率的变化及焊点力学特性因素仿真结果的影响。

Using PMK programing controler simulates of the process control system and corrects parameter of controler in extractive tower.

利用PMK可编程调节器实现过程控制系统的,调节器进行参数整定。

A new clue for architectural CAD and software design is proposed during the developing procedure, which is called three-moduler-in-one method.

在系统研制中，提出实现了集建筑建模器-结构分析器-演示器于一体的三器一体化的建筑工程辅助设计软件开发思路。

Finally, the optimization quantity of spare parts following exponential distribution are calculated with both this method and analysable method.The two results fit well.

最后利用一个指数分布实例解析方法方法计算出的结果进行比较，从而所提出的方法进行了检验。

As the most important component of automobilism simulator, the newgenerated real-time visual system is a completely new visual simulation and scene management system.

作为汽车驾驶模拟器的重要组成部分，汽车驾驶模拟器新一代实时视景系统是一个全新的视景场景管理系统。

Computer simulation demonstrate that the proposed algorithm can adapt to the identification of several different kinds of fabric as woven, stockinet, damask and mesh fabric.

通过机织布、针织布、斜纹布网眼布等不同种类织物的验证了该算法的有效性适应性。

In order to adapt to real time simulation, the nodes of system and the predigestion was made according to the characteristic of reactor coolant system which will be simulated.

本论文针要的冷却剂系统的特点，系统进行了节点划分，做了适当简化，以使其适应实时的需要。

The dynamic equation of the transient response in a cracked rotor system was modelled, the numerical simulation solutions of the uncracked rotor and the cracked rotor were obtained.

摘要基于建立的裂纹转子瞬态回应动力学模型，得到了有无裂纹转子的数值解。

The effect of the mesh density, the change of dynamic plasticity property of mild steel with strain rate and the spotweld mechanical property on the simulation results is analyzed.

分析了网格密度、身用低碳钢材料塑性特性随应变率的变化及焊点力学特性因素结果的影响。

Using PMK programing controler simulates of the process control system and corrects parameter of controler in extractive tower.

利用PMK可编程调节器实现过程控制系真,并调节器进行参数整定。

A new clue for architectural CAD and software design is proposed during the developing procedure, which is called three-moduler-in-one method.

在系研制中，提出并实现了集建筑建模器-结构分析器-真演示器于一体三器一体化建筑工程辅助设计软件开发思路。

Finally, the optimization quantity of spare parts following exponential distribution are calculated with both this method and analysable method.The two results fit well.

最后利用一个指数分布实例解析方法真方法计算出结果进行比较，从而所提出真方法进行了检验。

As the most important component of automobilism simulator, the newgenerated real-time visual system is a completely new visual simulation and scene management system.

作为汽车驾驶模拟器重要组成部分，汽车驾驶模拟器新一代实时视系是一个全新视真管理系。

Computer simulation demonstrate that the proposed algorithm can adapt to the identification of several different kinds of fabric as woven, stockinet, damask and mesh fabric.

通过机织布、针织布、斜纹布网眼布等不同种类织物真验证了该算法有效性适应性。

In order to adapt to real time simulation, the nodes of system and the predigestion was made according to the characteristic of reactor coolant system which will be simulated.

本论文针要真冷却剂系特点，系进行了节点划分，并做了适当简化，以使其适应实时真需要。

The dynamic equation of the transient response in a cracked rotor system was modelled, the numerical simulation solutions of the uncracked rotor and the cracked rotor were obtained.

摘要基于建立裂纹转子瞬态回应动力学模型，得到了有无裂纹转子数值真解。

The effect of the mesh density, the change of dynamic plasticity property of mild steel with strain rate and the spotweld mechanical property on the simulation results is analyzed.

分析了网格密度、身用低碳钢材料塑性特性随应变率变化及焊点力学特性因素真结果影响。

Using PMK programing controler simulates of the process control system and corrects parameter of controler in extractive tower.

利用PMK可编程调节器实现过程控制系统的,调节器进行参数整定。

A new clue for architectural CAD and software design is proposed during the developing procedure, which is called three-moduler-in-one method.

在系统研制中，提出实现了集建筑建模器-结构分析器-演示器于一体的三器一体化的建筑工程辅助设计软件开发思路。

Finally, the optimization quantity of spare parts following exponential distribution are calculated with both this method and analysable method.The two results fit well.

最后利用一个指数分布实例解析方法方法计算出的结果进行比较，从而所提出的方法进行了检验。

As the most important component of automobilism simulator, the newgenerated real-time visual system is a completely new visual simulation and scene management system.

作为汽车驾驶模拟器的重要组成部分，汽车驾驶模拟器新一代实时视景系统是一个全新的视景场景管理系统。

Computer simulation demonstrate that the proposed algorithm can adapt to the identification of several different kinds of fabric as woven, stockinet, damask and mesh fabric.

通过机织布、针织布、斜纹布网眼布等不同种类织物的验证了该算法的有效性适应性。

In order to adapt to real time simulation, the nodes of system and the predigestion was made according to the characteristic of reactor coolant system which will be simulated.

本论文针要的冷却剂系统的特点，系统进行了节点划分，做了适当简化，以使其适应实时的需要。

The dynamic equation of the transient response in a cracked rotor system was modelled, the numerical simulation solutions of the uncracked rotor and the cracked rotor were obtained.

摘要基于建立的裂纹转子瞬态回应动力学模型，得到了有无裂纹转子的数值解。

The effect of the mesh density, the change of dynamic plasticity property of mild steel with strain rate and the spotweld mechanical property on the simulation results is analyzed.

分析了网格密度、身用低碳钢材料塑性特性随应变率的变化及焊点力学特性因素结果的影响。

Using PMK programing controler simulates of the process control system and corrects parameter of controler in extractive tower.

PMK可编程调节器实现过程控制系统的仿真,并调节器进行参数整定。

A new clue for architectural CAD and software design is proposed during the developing procedure, which is called three-moduler-in-one method.

在系统研制中，提出并实现了集建筑建模器-结构分析器-仿真演示器于一体的三器一体化的建筑工程辅助设和软件开发思路。

Finally, the optimization quantity of spare parts following exponential distribution are calculated with both this method and analysable method.The two results fit well.

最一个指数分布实例解析方法和仿真方法出的结果进行比较，从而所提出的仿真方法进行了检验。

As the most important component of automobilism simulator, the newgenerated real-time visual system is a completely new visual simulation and scene management system.

作为汽车驾驶模拟器的重要组成部分，汽车驾驶模拟器新一代实时视景系统是一个全新的视景仿真和场景管理系统。

Computer simulation demonstrate that the proposed algorithm can adapt to the identification of several different kinds of fabric as woven, stockinet, damask and mesh fabric.

通过机织布、针织布、斜纹布和网眼布等不同种类织物的仿真验证了该法的有效性和适应性。

In order to adapt to real time simulation, the nodes of system and the predigestion was made according to the characteristic of reactor coolant system which will be simulated.

本论文针要仿真的冷却剂系统的特点，系统进行了节点划分，并做了适当简化，以使其适应实时仿真的需要。

The dynamic equation of the transient response in a cracked rotor system was modelled, the numerical simulation solutions of the uncracked rotor and the cracked rotor were obtained.

摘要基于建立的裂纹转子瞬态回应动力学模型，得到了有无裂纹转子的数值仿真解。

The effect of the mesh density, the change of dynamic plasticity property of mild steel with strain rate and the spotweld mechanical property on the simulation results is analyzed.

分析了网格密度、身低碳钢材料塑性特性随应变率的变化及焊点力学特性因素仿真结果的影响。

Using PMK programing controler simulates of the process control system and corrects parameter of controler in extractive tower.

利用PMK可编程调节器实现过程控制系统的仿真,并调节器进行参数整定。

A new clue for architectural CAD and software design is proposed during the developing procedure, which is called three-moduler-in-one method.

在系统研制中，提出并实现了集建筑建模器-结构分析器-仿真演示器于一体的三器一体化的建筑工程辅助设计软件开发思路。

Finally, the optimization quantity of spare parts following exponential distribution are calculated with both this method and analysable method.The two results fit well.

最后利用一个指数分实解析方法仿真方法计算出的结果进行比较，从而所提出的仿真方法进行了检验。

As the most important component of automobilism simulator, the newgenerated real-time visual system is a completely new visual simulation and scene management system.

作为汽车驾驶模拟器的重要组成部分，汽车驾驶模拟器新一代实时视景系统是一个全新的视景仿真场景管理系统。

Computer simulation demonstrate that the proposed algorithm can adapt to the identification of several different kinds of fabric as woven, stockinet, damask and mesh fabric.

通过机织、针织、斜纹眼等不同种类织物的仿真验证了该算法的有效性适应性。

In order to adapt to real time simulation, the nodes of system and the predigestion was made according to the characteristic of reactor coolant system which will be simulated.

本论文针要仿真的冷却剂系统的特点，系统进行了节点划分，并做了适当简化，以使其适应实时仿真的需要。

The dynamic equation of the transient response in a cracked rotor system was modelled, the numerical simulation solutions of the uncracked rotor and the cracked rotor were obtained.

摘要基于建立的裂纹转子瞬态回应动力学模型，得到了有无裂纹转子的数值仿真解。

The effect of the mesh density, the change of dynamic plasticity property of mild steel with strain rate and the spotweld mechanical property on the simulation results is analyzed.

分析了格密度、身用低碳钢材料塑性特性随应变率的变化及焊点力学特性因素仿真结果的影响。