刚度

Furthermore, the relation of fabric drapability and stretching-length, flexual modulus and shearing modulus is also discussed.

初步研究织物伸出长度、弯曲刚度、剪切刚度对态悬垂系数的影响。

On the basis of traditional quasistatic analytical method, stiffness for angular contact ball bearing of aeroengine is studied.

在传统拟分析方法的基础上,对航空发动机角接触球轴承刚度进行研究。

The analytical model of stiffness for angular contact ball bearing of aeroengine is established by the quasistatic analytical method.

通过拟分析方法，可以建立航空发动机角接触球轴承的刚度分析模型。

Lastly, by using the FORTRAN language, the thesis compiles the program of the stiffness optimization process of short-leg shear wall-corewall structure.

最后运用FORTRAN语言编制短肢剪墙-核心筒构剪墙刚度优化程序。

Because the ideal “rigid joint” and “hinged joint” are inexistent, the stiffness of any connection types is between ideal rigid joint and hinged joint.

因为理想的刚节点和铰接点是不存在的，任何连接形式的刚度都是介于理想刚接和完全铰接之间的。

The semiactive variable stiffness and damping control device outperforms the semiactive variable stiffness control as the result of the presence of auxiliary damping in this device.

与变刚度控制相比，变刚度变控制由于在装置中附加，可以取得比变刚度控制更为有效的减震控制效果。

A rigid and light mantle joins tightly between the geophone body and its tailcone, combining with the tailcone, to form a device called geophone seat.

摘要在检波器尾锥与检波器主体连接处紧密连接一个刚度大、质量轻的“尾罩”，该尾罩与尾锥共同构成检波器尾座。

That we use finite element analysis calculate to the strength and the rigidity of the bodywork structure.Thus the optimum fillet of the small underframe structure can be specified.

采用有限单元法对小底架构的强度、刚度、挠跨比进行分析计算,为小底架设计提供参考依据。

The shoulderbeam is a joint point between the upper and lower part of polystyle columns.Based on its mechanical analysis,the shoulderbeam is simplified to an elastic hinge with angle stiffness.

肩梁是多肢柱中上下柱的连接节点，根据其受特点，在建立模型时，将它简化为具有角刚度的弹性铰。

By observation and analysis of the test data, changing the plate steel endshield of motor into the disc iron one can improve the rigidness of endshield, and reduce the axial vibration of motor.

通过观察和检测数据分析,电动机的平板式钢板端盖改为盘式铸铁端盖,可提高端盖刚度,降低电机轴向振动。