The process conditions,including presintering temperature,sintering temperature and time,cooling mode and pretreatment were studied.

对烧成过程(烧温度、烧结温度保温时间、降温方式)理工艺进行了研究。

A new type of burnt lime slaker have been developed by LAIGANG sintering plant.

莱钢烧结厂研了一种新型的生石灰消化器。

Modified polyacrylic acid aqueous vehicle may be the headmost applied in electronic pastes of high sintering temperature.

其中丙烯酸将有可能在高温电子浆料中率先应用。

Sinter type fastigiate-handle drills:Use for drilling hard and brickle material,...

简 介: 烧结锥柄钻头：适用于玻璃、陶瓷等硬材料的钻孔。

The author introducd the electric equipment design of ore smelting eutecticum engineering of ore sintering plate, stated the problemes and the countermeasures.

介绍了矿冶共晶工程烧结车间的电气设计,并阐述了设计遇到一些问题以解决的方法。

Using dolomite and sinter magnesia clinker as a main material and added with alkali metal phosphate binder and additives,amagnesia-calcia coating material has been developed.

采用白云石配以适量的镁砂熟料和磷酸盐结合剂复合外加剂研出了具有较好能的镁钙质中间包涂料。

The effects of sintering parameters on the shear and bond strength of ceramet friction material were studied and its fracture morphology was observed and analyzed.

研究了烧结工艺参数对金属陶瓷摩擦材料抗剪强度和金属陶瓷摩擦片结合强度的影响,观察并分析了断口形貌。

The obtained achievement in building material industry is studied, including sintering cement with substituting coal by cokeite and smelting rockwool with substituting coke by cokeite and so on.

本文介绍了采煤副产品～天然焦的特，并对其在建材行业的开发研究成果进行了评述．主要包括天然焦代煤烧水泥，天然焦代焦炭熔岩棉等。

The metal reflet glaze samples were prepared with the Huxian wheat-meal-stone accession 0%, 5%, 10% and 15% according to the traditional metal reflet glaze formula and then sintered at 950%.

摘要在金属光泽釉配方基础上，作了4组户县麦饭石添量为0%，5%，10%，15%的金属光泽釉试样，在950℃温度环境下烧成。

For sinter with 25% and 50% MAC fines the iron oxides mainly consisted of hematite and magnetite, the bonding phase were mainly dicalcium silicate, glassiness, and a few amount of calcium ferrite.

配比为25%和50%的两种烧结矿中铁氧化物均以赤铁矿、磁铁矿为主，粘结相主要以铁酸钙、硅酸二钙和玻璃质为主，但铁酸钙数量不多。

The process conditions,including presintering temperature,sintering temperature and time,cooling mode and pretreatment were studied.

对烧成过程(预烧温度、烧结温度及保温时间、降温方式)及预处理工艺进行研究。

A new type of burnt lime slaker have been developed by LAIGANG sintering plant.

莱钢烧结厂研一种新型的生石灰消化器。

Modified polyacrylic acid aqueous vehicle may be the headmost applied in electronic pastes of high sintering temperature.

其中改性聚丙烯酸将有可能在高温电子浆料中率先应用。

Sinter type fastigiate-handle drills:Use for drilling hard and brickle material,...

简 介: 烧结锥柄钻头：适用于玻璃、陶瓷等硬性材料的钻孔。

The author introducd the electric equipment design of ore smelting eutecticum engineering of ore sintering plate, stated the problemes and the countermeasures.

介绍矿冶共晶工程烧结车间的电气设计,并设计遇到一些问题以及解决的方法。

Using dolomite and sinter magnesia clinker as a main material and added with alkali metal phosphate binder and additives,amagnesia-calcia coating material has been developed.

采用白云石配以适量的镁砂熟料和磷酸盐结合剂及复合外加剂研出具有较好性能的镁钙质中间包涂料。

The effects of sintering parameters on the shear and bond strength of ceramet friction material were studied and its fracture morphology was observed and analyzed.

研究烧结工艺参数对金属陶瓷摩擦材料抗剪强度和金属陶瓷摩擦片结合强度的影响,观察并分析断口形貌。

The obtained achievement in building material industry is studied, including sintering cement with substituting coal by cokeite and smelting rockwool with substituting coke by cokeite and so on.

本文介绍采煤副产品～天然焦的特性，并对其在建材行业的开发研究成果进行评．主要包括天然焦代煤烧水泥，天然焦代焦炭熔岩棉等。

The metal reflet glaze samples were prepared with the Huxian wheat-meal-stone accession 0%, 5%, 10% and 15% according to the traditional metal reflet glaze formula and then sintered at 950%.

摘要在金属光泽釉配方基础上，作4组户县麦饭石添量为0%，5%，10%，15%的金属光泽釉试样，在950℃温度环境下烧成。

For sinter with 25% and 50% MAC fines the iron oxides mainly consisted of hematite and magnetite, the bonding phase were mainly dicalcium silicate, glassiness, and a few amount of calcium ferrite.

配比为25%和50%的两种烧结矿中铁氧化物均以赤铁矿、磁铁矿为主，粘结相主要以铁酸钙、硅酸二钙和玻璃质为主，但铁酸钙数量不多。

The process conditions,including presintering temperature,sintering temperature and time,cooling mode and pretreatment were studied.

对成过(预温度、温度及保温时间、降温方式)及预处理工艺进行了研究。

A new type of burnt lime slaker have been developed by LAIGANG sintering plant.

莱钢厂研了一种新型的生石灰消化器。

Modified polyacrylic acid aqueous vehicle may be the headmost applied in electronic pastes of high sintering temperature.

其中改性聚丙烯酸将有可能在高温电子浆料中率先应用。

Sinter type fastigiate-handle drills:Use for drilling hard and brickle material,...

简 介: 锥柄钻头：适用于玻璃、陶瓷等硬性材料的钻孔。

The author introducd the electric equipment design of ore smelting eutecticum engineering of ore sintering plate, stated the problemes and the countermeasures.

介绍了矿冶共晶工车间的电气设计,并阐述了设计遇到一些问题以及解决的方法。

Using dolomite and sinter magnesia clinker as a main material and added with alkali metal phosphate binder and additives,amagnesia-calcia coating material has been developed.

采用白云石配以适量的镁砂熟料和磷酸盐合及复合外加研出了具有较好性能的镁钙质中间包涂料。

The effects of sintering parameters on the shear and bond strength of ceramet friction material were studied and its fracture morphology was observed and analyzed.

研究了工艺参数对金属陶瓷摩擦材料抗剪强度和金属陶瓷摩擦片合强度的影响,观察并分析了断口形貌。

The obtained achievement in building material industry is studied, including sintering cement with substituting coal by cokeite and smelting rockwool with substituting coke by cokeite and so on.

本文介绍了采煤副产品～天然焦的特性，并对其在建材行业的开发研究成果进行了评述．主要包括天然焦代煤水泥，天然焦代焦炭熔岩棉等。

The metal reflet glaze samples were prepared with the Huxian wheat-meal-stone accession 0%, 5%, 10% and 15% according to the traditional metal reflet glaze formula and then sintered at 950%.

摘要在金属光泽釉配方基础上，作了4组户县麦饭石添量为0%，5%，10%，15%的金属光泽釉试样，在950℃温度环境下成。

For sinter with 25% and 50% MAC fines the iron oxides mainly consisted of hematite and magnetite, the bonding phase were mainly dicalcium silicate, glassiness, and a few amount of calcium ferrite.

配比为25%和50%的两种矿中铁氧化物均以赤铁矿、磁铁矿为主，粘相主要以铁酸钙、硅酸二钙和玻璃质为主，但铁酸钙数量不多。

The process conditions,including presintering temperature,sintering temperature and time,cooling mode and pretreatment were studied.

对烧成过程(预烧温度、烧温度及保温时间、降温方式)及预处理工艺进行了研究。

A new type of burnt lime slaker have been developed by LAIGANG sintering plant.

莱钢烧厂研了一种新型的生石灰消化器。

Modified polyacrylic acid aqueous vehicle may be the headmost applied in electronic pastes of high sintering temperature.

其中改性聚丙烯酸将有可能在高温电子浆料中率先应。

Sinter type fastigiate-handle drills:Use for drilling hard and brickle material,...

简 介: 烧锥柄钻：于玻璃、陶瓷等硬性材料的钻孔。

The author introducd the electric equipment design of ore smelting eutecticum engineering of ore sintering plate, stated the problemes and the countermeasures.

介绍了矿冶共晶工程烧车间的电气设计,并阐述了设计遇到一些问题以及解决的方法。

Using dolomite and sinter magnesia clinker as a main material and added with alkali metal phosphate binder and additives,amagnesia-calcia coating material has been developed.

采白云石配以量的镁砂熟料和磷酸盐合剂及复合外加剂研出了具有较好性能的镁钙质中间包涂料。

The effects of sintering parameters on the shear and bond strength of ceramet friction material were studied and its fracture morphology was observed and analyzed.

研究了烧工艺参数对金属陶瓷摩擦材料抗剪强度和金属陶瓷摩擦片合强度的影响,观察并分析了断口形貌。

The obtained achievement in building material industry is studied, including sintering cement with substituting coal by cokeite and smelting rockwool with substituting coke by cokeite and so on.

本文介绍了采煤副产品～天然焦的特性，并对其在建材行业的开发研究成果进行了评述．主要包括天然焦代煤烧水泥，天然焦代焦炭熔岩棉等。

The metal reflet glaze samples were prepared with the Huxian wheat-meal-stone accession 0%, 5%, 10% and 15% according to the traditional metal reflet glaze formula and then sintered at 950%.

摘要在金属光泽釉配方基础上，作了4组户县麦饭石添量为0%，5%，10%，15%的金属光泽釉试样，在950℃温度环境下烧成。

For sinter with 25% and 50% MAC fines the iron oxides mainly consisted of hematite and magnetite, the bonding phase were mainly dicalcium silicate, glassiness, and a few amount of calcium ferrite.

配比为25%和50%的两种烧矿中铁氧化物均以赤铁矿、磁铁矿为主，粘相主要以铁酸钙、硅酸二钙和玻璃质为主，但铁酸钙数量不多。

The process conditions,including presintering temperature,sintering temperature and time,cooling mode and pretreatment were studied.

对成过程(预温度、温度及保温时间、降温方式)及预处理工艺进行了究。

A new type of burnt lime slaker have been developed by LAIGANG sintering plant.

莱钢厂了一种新型的生石灰消化器。

Modified polyacrylic acid aqueous vehicle may be the headmost applied in electronic pastes of high sintering temperature.

其中改性聚丙烯酸将有可能在高温电子浆料中率先应用。

Sinter type fastigiate-handle drills:Use for drilling hard and brickle material,...

简 介: 锥柄钻头：适用于玻璃、陶瓷等硬性材料的钻孔。

The author introducd the electric equipment design of ore smelting eutecticum engineering of ore sintering plate, stated the problemes and the countermeasures.

介绍了矿冶共晶工程车间的电气设计,并阐述了设计遇到一些问题以及解决的方法。

Using dolomite and sinter magnesia clinker as a main material and added with alkali metal phosphate binder and additives,amagnesia-calcia coating material has been developed.

采用白云石配以适量的镁砂熟料和磷酸盐合及复合外出了具有较好性能的镁钙质中间包涂料。

The effects of sintering parameters on the shear and bond strength of ceramet friction material were studied and its fracture morphology was observed and analyzed.

究了工艺参数对金属陶瓷摩擦材料抗剪强度和金属陶瓷摩擦片合强度的影响,观察并分析了断口形貌。

The obtained achievement in building material industry is studied, including sintering cement with substituting coal by cokeite and smelting rockwool with substituting coke by cokeite and so on.

本文介绍了采煤副产品～天然焦的特性，并对其在建材行业的开发究成果进行了评述．主要包括天然焦代煤水泥，天然焦代焦炭岩棉等。

The metal reflet glaze samples were prepared with the Huxian wheat-meal-stone accession 0%, 5%, 10% and 15% according to the traditional metal reflet glaze formula and then sintered at 950%.

摘要在金属光泽釉配方基础上，作了4组户县麦饭石添量为0%，5%，10%，15%的金属光泽釉试样，在950℃温度环境下成。

For sinter with 25% and 50% MAC fines the iron oxides mainly consisted of hematite and magnetite, the bonding phase were mainly dicalcium silicate, glassiness, and a few amount of calcium ferrite.

配比为25%和50%的两种矿中铁氧化物均以赤铁矿、磁铁矿为主，粘相主要以铁酸钙、硅酸二钙和玻璃质为主，但铁酸钙数量不多。

The process conditions,including presintering temperature,sintering temperature and time,cooling mode and pretreatment were studied.

对烧成过程(预烧温度、烧结温度及保温时间、降温方式)及预处理工艺进行了研究。

A new type of burnt lime slaker have been developed by LAIGANG sintering plant.

莱钢烧结厂研了一种新型的生石灰消化器。

Modified polyacrylic acid aqueous vehicle may be the headmost applied in electronic pastes of high sintering temperature.

其中改性聚丙烯酸将有可能在高温电子浆料中率先应。

Sinter type fastigiate-handle drills:Use for drilling hard and brickle material,...

简 介: 烧结锥柄钻头：适于、瓷等硬性材料的钻孔。

The author introducd the electric equipment design of ore smelting eutecticum engineering of ore sintering plate, stated the problemes and the countermeasures.

介绍了矿冶共晶工程烧结车间的电气设计,并阐述了设计遇到一些问题以及解决的方法。

Using dolomite and sinter magnesia clinker as a main material and added with alkali metal phosphate binder and additives,amagnesia-calcia coating material has been developed.

采白云石配以适量的镁砂熟料和磷酸盐结合剂及复合外加剂研出了具有较好性能的镁钙质中间包涂料。

The effects of sintering parameters on the shear and bond strength of ceramet friction material were studied and its fracture morphology was observed and analyzed.

研究了烧结工艺参数对金属瓷摩擦材料抗剪强度和金属瓷摩擦片结合强度的影响,观察并分析了断口形貌。

The obtained achievement in building material industry is studied, including sintering cement with substituting coal by cokeite and smelting rockwool with substituting coke by cokeite and so on.

本文介绍了采煤副产品～天然焦的特性，并对其在建材行业的开发研究成果进行了评述．主要包括天然焦代煤烧水泥，天然焦代焦炭熔岩棉等。

The metal reflet glaze samples were prepared with the Huxian wheat-meal-stone accession 0%, 5%, 10% and 15% according to the traditional metal reflet glaze formula and then sintered at 950%.

摘要在金属光泽釉配方基础上，作了4组户县麦饭石添量为0%，5%，10%，15%的金属光泽釉试样，在950℃温度环境下烧成。

For sinter with 25% and 50% MAC fines the iron oxides mainly consisted of hematite and magnetite, the bonding phase were mainly dicalcium silicate, glassiness, and a few amount of calcium ferrite.

配比为25%和50%的两种烧结矿中铁氧化物均以赤铁矿、磁铁矿为主，粘结相主要以铁酸钙、硅酸二钙和质为主，但铁酸钙数量不多。

The process conditions,including presintering temperature,sintering temperature and time,cooling mode and pretreatment were studied.

对烧成过程(预烧温度、烧结温度及保温时、降温方式)及预处理工艺进行了研究。

A new type of burnt lime slaker have been developed by LAIGANG sintering plant.

莱钢烧结厂研了一种新型生石灰消化器。

Modified polyacrylic acid aqueous vehicle may be the headmost applied in electronic pastes of high sintering temperature.

其中改性聚丙烯酸将有可能在高温子浆料中率先应用。

Sinter type fastigiate-handle drills:Use for drilling hard and brickle material,...

简 介: 烧结锥柄钻头：适用于玻璃、陶瓷等硬性材料钻孔。

The author introducd the electric equipment design of ore smelting eutecticum engineering of ore sintering plate, stated the problemes and the countermeasures.

介绍了矿冶共晶工程烧结车气设计,并阐述了设计遇到一些问题以及解决方法。

Using dolomite and sinter magnesia clinker as a main material and added with alkali metal phosphate binder and additives,amagnesia-calcia coating material has been developed.

采用白云石配以适量镁砂熟料和磷酸盐结合剂及复合外加剂研了具有较好性能镁钙质中包涂料。

The effects of sintering parameters on the shear and bond strength of ceramet friction material were studied and its fracture morphology was observed and analyzed.

研究了烧结工艺参数对金属陶瓷摩擦材料抗剪强度和金属陶瓷摩擦片结合强度影响,观察并分析了断口形貌。

The obtained achievement in building material industry is studied, including sintering cement with substituting coal by cokeite and smelting rockwool with substituting coke by cokeite and so on.

本文介绍了采煤副产品～天然焦特性，并对其在建材行业开发研究成果进行了评述．主要包括天然焦代煤烧水泥，天然焦代焦炭熔岩棉等。

The metal reflet glaze samples were prepared with the Huxian wheat-meal-stone accession 0%, 5%, 10% and 15% according to the traditional metal reflet glaze formula and then sintered at 950%.

摘要在金属光泽釉配方基础上，作了4组户县麦饭石添量为0%，5%，10%，15%金属光泽釉试样，在950℃温度环境下烧成。

For sinter with 25% and 50% MAC fines the iron oxides mainly consisted of hematite and magnetite, the bonding phase were mainly dicalcium silicate, glassiness, and a few amount of calcium ferrite.

配比为25%和50%两种烧结矿中铁氧化物均以赤铁矿、磁铁矿为主，粘结相主要以铁酸钙、硅酸二钙和玻璃质为主，但铁酸钙数量不多。

The process conditions,including presintering temperature,sintering temperature and time,cooling mode and pretreatment were studied.

对烧成过程(预烧度、烧结度及保时间、式)及预处理工艺进行了研究。

A new type of burnt lime slaker have been developed by LAIGANG sintering plant.

莱钢烧结厂研了一种新型的生石灰消化器。

Modified polyacrylic acid aqueous vehicle may be the headmost applied in electronic pastes of high sintering temperature.

其中改性聚丙有可能在高电子浆料中率先应用。

Sinter type fastigiate-handle drills:Use for drilling hard and brickle material,...

简 介: 烧结锥柄钻头：适用于玻璃、陶瓷等硬性材料的钻孔。

The author introducd the electric equipment design of ore smelting eutecticum engineering of ore sintering plate, stated the problemes and the countermeasures.

介绍了矿冶共晶工程烧结车间的电气设计,并阐述了设计遇到一些问题以及解决的法。

Using dolomite and sinter magnesia clinker as a main material and added with alkali metal phosphate binder and additives,amagnesia-calcia coating material has been developed.

采用白云石配以适量的镁砂熟料和磷盐结合剂及复合外加剂研出了具有较好性能的镁钙质中间包涂料。

The effects of sintering parameters on the shear and bond strength of ceramet friction material were studied and its fracture morphology was observed and analyzed.

研究了烧结工艺参数对金属陶瓷摩擦材料抗剪强度和金属陶瓷摩擦片结合强度的影响,观察并分析了断口形貌。

The obtained achievement in building material industry is studied, including sintering cement with substituting coal by cokeite and smelting rockwool with substituting coke by cokeite and so on.

本文介绍了采煤副产品～天然焦的特性，并对其在建材行业的开发研究成果进行了评述．主要包括天然焦代煤烧水泥，天然焦代焦炭熔岩棉等。

The metal reflet glaze samples were prepared with the Huxian wheat-meal-stone accession 0%, 5%, 10% and 15% according to the traditional metal reflet glaze formula and then sintered at 950%.

摘要在金属光泽釉配基础上，作了4组户县麦饭石添量为0%，5%，10%，15%的金属光泽釉试样，在950℃度环境下烧成。

For sinter with 25% and 50% MAC fines the iron oxides mainly consisted of hematite and magnetite, the bonding phase were mainly dicalcium silicate, glassiness, and a few amount of calcium ferrite.

配比为25%和50%的两种烧结矿中铁氧化物均以赤铁矿、磁铁矿为主，粘结相主要以铁钙、硅二钙和玻璃质为主，但铁钙数量不多。

The process conditions,including presintering temperature,sintering temperature and time,cooling mode and pretreatment were studied.

对烧成过程(预烧温度、烧温度及保温时间、降温方式)及预处理工艺进行了究。

A new type of burnt lime slaker have been developed by LAIGANG sintering plant.

莱钢烧厂了一种新型的生石灰消化器。

Modified polyacrylic acid aqueous vehicle may be the headmost applied in electronic pastes of high sintering temperature.

其中改性聚丙烯酸将有可能在高温电子浆料中率先应用。

Sinter type fastigiate-handle drills:Use for drilling hard and brickle material,...

简 介: 烧锥柄钻头：适用于玻璃、陶瓷等硬性材料的钻孔。

The author introducd the electric equipment design of ore smelting eutecticum engineering of ore sintering plate, stated the problemes and the countermeasures.

介绍了矿冶共晶工程烧车间的电气设计,并阐述了设计遇到一些问题以及解决的方法。

Using dolomite and sinter magnesia clinker as a main material and added with alkali metal phosphate binder and additives,amagnesia-calcia coating material has been developed.

采用白云石配以适量的镁砂熟料和磷酸盐合剂及复合外加剂了具有较好性能的镁钙质中间包涂料。

The effects of sintering parameters on the shear and bond strength of ceramet friction material were studied and its fracture morphology was observed and analyzed.

究了烧工艺参数对金属陶瓷摩擦材料抗剪强度和金属陶瓷摩擦片合强度的影响,观察并分析了断口形貌。

The obtained achievement in building material industry is studied, including sintering cement with substituting coal by cokeite and smelting rockwool with substituting coke by cokeite and so on.

本文介绍了采煤副产品～天然焦的特性，并对其在建材行业的开发究成果进行了评述．主要包括天然焦代煤烧水泥，天然焦代焦炭岩棉等。

The metal reflet glaze samples were prepared with the Huxian wheat-meal-stone accession 0%, 5%, 10% and 15% according to the traditional metal reflet glaze formula and then sintered at 950%.

摘要在金属光泽釉配方基础上，作了4组户县麦饭石添量为0%，5%，10%，15%的金属光泽釉试样，在950℃温度环境下烧成。

For sinter with 25% and 50% MAC fines the iron oxides mainly consisted of hematite and magnetite, the bonding phase were mainly dicalcium silicate, glassiness, and a few amount of calcium ferrite.

配比为25%和50%的两种烧矿中铁氧化物均以赤铁矿、磁铁矿为主，粘相主要以铁酸钙、硅酸二钙和玻璃质为主，但铁酸钙数量不多。