For filler, we mixed epoxy wood rebuilder, following the manufacturer's instructions.

对于灌装机，我们环氧木重建者混合后，制。

All fillers lowered the maximum exotherm.

所有填料都降低放热效应。

Thermoresistant saggers containing silicon carbide and granular filler were produced through slip casting in plaster mould.

用石膏模浇注法生产出了含碳化硅和粒状填料耐热匣钵。

Application: It is the most ideal filler material of reburner , reacting furnace, filler furnace on oil and chemical industries.

是广大石油、化工行业中转化炉、反应炉、填料塔中最为理想填料。

The ultraviolet irradiated polypropylene (PP) with the oxygen polar groups on its chain was blended with the inorganic filler STC (Sericite-Tridymite-Cristobalite).

聚丙烯在室温、空气下,通过低能、短时间紫外光辐照,在其分子链上引入了含氧极性基团。

The vulcanization characteristics of a silicone rubber foam made by technology of removing inert filler used as foaming agent was investigated with curometer.

采用橡胶硫化仪研究了溶析成孔工艺制备硅橡胶泡沫材料硫化特性,分析讨论了硅橡胶结构、成孔剂用量对硫化特性影响规律。

Copper conductive adhesives were prepared using epoxy as matrix, the mixture of m-phenylenediamine and diaminodiphenylmethane as hardener, and copper particles as the conducting filler.

以环氧树脂为基体,间苯二胺和二氨基二苯甲烷低融点混合物为固化剂,铜粉为导电填料,制备了热固化各向同性导电胶。

Filler retention and drainability of wheat shaw pulp could be improved remarkably when PAC and PDADMAC were added as ATC before the addition of CPAM.

用PAC和PDADMAC作为阴离子捕捉剂可显著改善麦草浆滤水性，提高其留着率。

A series of reversible thermochromic paints were prepared using different kinds of inorganic compounds as filler,cresol red as chromophoric reagent and boric acid as delomorphic reagent.

以甲酚红为发色剂,硼酸为显色剂,选择不同无机填料,制备出系列可逆热致变色颜料。

Results showed that the oil removal effect of lipophilic filler is better than lipophobic filler, and the treatment processes can obtain satisfactory treatment effect without using any chemicals.

结果表,亲油性聚结填料除油效果要好于疏油性填料,水温与聚结负荷对除油效率有较大影响。在不投加任何药剂情况下,试验处理流程可将聚合物驱采油废水处理到理想效果。

The tubes are dumped in bulk into the hopper of a bottle unscrambler, which feeds them into an enclosed rotary volumetric filler.

该管大量倾倒到漏斗一瓶理瓶，其中饲料成一个封闭旋转式容积灌装机。

For filler, we mixed epoxy wood rebuilder, following the manufacturer's instructions.

对于灌装机，我们环氧者混合后，制造商的明。

All fillers lowered the maximum exotherm.

所有填料都降低应。

Thermoresistant saggers containing silicon carbide and granular filler were produced through slip casting in plaster mould.

用石膏模浇注法生产出了含碳化硅和粒状填料的耐匣钵。

Application: It is the most ideal filler material of reburner , reacting furnace, filler furnace on oil and chemical industries.

是广大石油、化工行业中转化炉、反应炉、填料塔中最为理想的填料。

The ultraviolet irradiated polypropylene (PP) with the oxygen polar groups on its chain was blended with the inorganic filler STC (Sericite-Tridymite-Cristobalite).

聚丙烯在室温、空气下,通过低能、短时间的紫外光辐照,在其分子链上引入了含氧的极性基团。

The vulcanization characteristics of a silicone rubber foam made by technology of removing inert filler used as foaming agent was investigated with curometer.

采用橡胶硫化仪研究了溶析成孔工艺制备的硅橡胶泡沫材料的硫化特性,分析讨论了硅橡胶的结构、成孔剂用量对硫化特性的影响规律。

Copper conductive adhesives were prepared using epoxy as matrix, the mixture of m-phenylenediamine and diaminodiphenylmethane as hardener, and copper particles as the conducting filler.

以环氧树脂为基体,间苯二胺和二氨基二苯甲烷的低融点混合物为固化剂,铜粉为导电填料,制备了固化各向同性导电胶。

Filler retention and drainability of wheat shaw pulp could be improved remarkably when PAC and PDADMAC were added as ATC before the addition of CPAM.

用PAC和PDADMAC作为阴离子捕捉剂可显著改善麦草浆的滤水性，提高其留着率。

A series of reversible thermochromic paints were prepared using different kinds of inorganic compounds as filler,cresol red as chromophoric reagent and boric acid as delomorphic reagent.

以甲酚红为发色剂,硼酸为显色剂,选择不同的无机填料,制备出系列可逆致变色颜料。

Results showed that the oil removal effect of lipophilic filler is better than lipophobic filler, and the treatment processes can obtain satisfactory treatment effect without using any chemicals.

结果表明,亲油性聚结填料的除油果要好于疏油性填料,水温与聚结负荷对除油率有较大影响。在不投加任何药剂的情况下,试验处理流程可将聚合物驱采油废水处理到理想果。

The tubes are dumped in bulk into the hopper of a bottle unscrambler, which feeds them into an enclosed rotary volumetric filler.

该管的大量倾倒到漏斗的一瓶理瓶，其中饲料成一个封闭旋转式容积灌装机。

For filler, we mixed epoxy wood rebuilder, following the manufacturer's instructions.

对于灌机，我们环氧木重建混合后，制造商的明。

All fillers lowered the maximum exotherm.

所有料都降低放热效应。

Thermoresistant saggers containing silicon carbide and granular filler were produced through slip casting in plaster mould.

用石膏模浇注法生产出含碳化和粒状料的耐热匣钵。

Application: It is the most ideal filler material of reburner , reacting furnace, filler furnace on oil and chemical industries.

是广大石油、化工行业中转化炉、反应炉、料塔中最为理想的料。

The ultraviolet irradiated polypropylene (PP) with the oxygen polar groups on its chain was blended with the inorganic filler STC (Sericite-Tridymite-Cristobalite).

聚丙烯在室温、空气下,通过低能、短时间的紫外光辐照,在其分子链上引入含氧的极性基团。

The vulcanization characteristics of a silicone rubber foam made by technology of removing inert filler used as foaming agent was investigated with curometer.

采用胶硫化仪研究溶析成孔工艺制备的胶泡沫材料的硫化特性,分析讨论胶的结构、成孔剂用量对硫化特性的影响规律。

Copper conductive adhesives were prepared using epoxy as matrix, the mixture of m-phenylenediamine and diaminodiphenylmethane as hardener, and copper particles as the conducting filler.

以环氧树脂为基体,间苯二胺和二氨基二苯甲烷的低融点混合物为固化剂,铜粉为导电料,制备热固化各向同性导电胶。

Filler retention and drainability of wheat shaw pulp could be improved remarkably when PAC and PDADMAC were added as ATC before the addition of CPAM.

用PAC和PDADMAC作为阴离子捕捉剂可显著改善麦草浆的滤水性，提高其留着率。

A series of reversible thermochromic paints were prepared using different kinds of inorganic compounds as filler,cresol red as chromophoric reagent and boric acid as delomorphic reagent.

以甲酚红为发色剂,硼酸为显色剂,选择不同的无机料,制备出系列可逆热致变色颜料。

Results showed that the oil removal effect of lipophilic filler is better than lipophobic filler, and the treatment processes can obtain satisfactory treatment effect without using any chemicals.

结果表明,亲油性聚结料的除油效果要好于疏油性料,水温与聚结负荷对除油效率有较大影响。在不投加任何药剂的情况下,试验处理流程可将聚合物驱采油废水处理到理想效果。

The tubes are dumped in bulk into the hopper of a bottle unscrambler, which feeds them into an enclosed rotary volumetric filler.

该管的大量倾倒到漏斗的一瓶理瓶，其中饲料成一个封闭旋转式容积灌机。

For filler, we mixed epoxy wood rebuilder, following the manufacturer's instructions.

对于灌装机，我们环氧木重建者混合后，制造商的明。

All fillers lowered the maximum exotherm.

所有都降低放热效应。

Thermoresistant saggers containing silicon carbide and granular filler were produced through slip casting in plaster mould.

用膏模浇注法生产出了含碳化硅和粒状的耐热匣钵。

Application: It is the most ideal filler material of reburner , reacting furnace, filler furnace on oil and chemical industries.

是广、化工行业中转化炉、反应炉、塔中最为理想的。

The ultraviolet irradiated polypropylene (PP) with the oxygen polar groups on its chain was blended with the inorganic filler STC (Sericite-Tridymite-Cristobalite).

聚丙烯在室温、空气下,通过低能、短时间的紫外光辐照,在其分子链上引入了含氧的极性基团。

The vulcanization characteristics of a silicone rubber foam made by technology of removing inert filler used as foaming agent was investigated with curometer.

采用橡胶硫化仪研究了溶析成孔工艺制备的硅橡胶泡沫材的硫化特性,分析讨论了硅橡胶的结构、成孔剂用量对硫化特性的影响规律。

Copper conductive adhesives were prepared using epoxy as matrix, the mixture of m-phenylenediamine and diaminodiphenylmethane as hardener, and copper particles as the conducting filler.

以环氧树脂为基体,间苯二胺和二氨基二苯甲烷的低融点混合物为固化剂,铜粉为导电,制备了热固化各向同性导电胶。

Filler retention and drainability of wheat shaw pulp could be improved remarkably when PAC and PDADMAC were added as ATC before the addition of CPAM.

用PAC和PDADMAC作为阴离子捕捉剂可显著改善麦草浆的滤水性，提高其留着率。

A series of reversible thermochromic paints were prepared using different kinds of inorganic compounds as filler,cresol red as chromophoric reagent and boric acid as delomorphic reagent.

以甲酚红为发色剂,硼酸为显色剂,选择不同的无机,制备出系列可逆热致变色颜。

Results showed that the oil removal effect of lipophilic filler is better than lipophobic filler, and the treatment processes can obtain satisfactory treatment effect without using any chemicals.

结果表明,亲性聚结的除效果要好于疏性,水温与聚结负荷对除效率有较影响。在不投加任何药剂的情况下,试验处理流程可将聚合物驱采废水处理到理想效果。

The tubes are dumped in bulk into the hopper of a bottle unscrambler, which feeds them into an enclosed rotary volumetric filler.

该管的量倾倒到漏斗的一瓶理瓶，其中饲成一个封闭旋转式容积灌装机。

For filler, we mixed epoxy wood rebuilder, following the manufacturer's instructions.

对于灌机，我们环氧木重建者混合后，制造商明。

All fillers lowered the maximum exotherm.

所有料都降低放热效应。

Thermoresistant saggers containing silicon carbide and granular filler were produced through slip casting in plaster mould.

用石膏模浇注法生产出了含碳化硅和粒状料耐热匣钵。

Application: It is the most ideal filler material of reburner , reacting furnace, filler furnace on oil and chemical industries.

是广大石油、化工行业中转化炉、反应炉、料塔中最为理想料。

The ultraviolet irradiated polypropylene (PP) with the oxygen polar groups on its chain was blended with the inorganic filler STC (Sericite-Tridymite-Cristobalite).

聚丙烯在室温、空气下,通过低能、短时间紫外光辐照,在其分子链上引入了含氧极性基团。

The vulcanization characteristics of a silicone rubber foam made by technology of removing inert filler used as foaming agent was investigated with curometer.

采用硫化仪研究了溶析成孔工艺制备硅泡沫材料硫化特性,分析讨论了硅结构、成孔剂用量对硫化特性影响规律。

Copper conductive adhesives were prepared using epoxy as matrix, the mixture of m-phenylenediamine and diaminodiphenylmethane as hardener, and copper particles as the conducting filler.

以环氧树脂为基体,间苯二胺和二氨基二苯甲烷低融点混合物为固化剂,铜粉为导电料,制备了热固化各向同性导电。

Filler retention and drainability of wheat shaw pulp could be improved remarkably when PAC and PDADMAC were added as ATC before the addition of CPAM.

用PAC和PDADMAC作为阴离子捕捉剂可显著改善麦草浆滤水性，提高其留着率。

A series of reversible thermochromic paints were prepared using different kinds of inorganic compounds as filler,cresol red as chromophoric reagent and boric acid as delomorphic reagent.

以甲酚红为发色剂,硼酸为显色剂,选择不同无机料,制备出系列可逆热致变色颜料。

Results showed that the oil removal effect of lipophilic filler is better than lipophobic filler, and the treatment processes can obtain satisfactory treatment effect without using any chemicals.

结果表明,亲油性聚结料除油效果要好于疏油性料,水温与聚结负荷对除油效率有较大影响。在不投加任何药剂情况下,试验处理流程可将聚合物驱采油废水处理到理想效果。

The tubes are dumped in bulk into the hopper of a bottle unscrambler, which feeds them into an enclosed rotary volumetric filler.

该管大量倾倒到漏斗一瓶理瓶，其中饲料成一个封闭旋转式容积灌机。

For filler, we mixed epoxy wood rebuilder, following the manufacturer's instructions.

对于灌装机，我们环氧木重建者混合后，制造商的明。

All fillers lowered the maximum exotherm.

所有填都降低放热效应。

Thermoresistant saggers containing silicon carbide and granular filler were produced through slip casting in plaster mould.

用石膏模浇注法生产出了含碳化硅和粒状填的耐热匣钵。

Application: It is the most ideal filler material of reburner , reacting furnace, filler furnace on oil and chemical industries.

是广大石油、化工行业中转化炉、反应炉、填塔中最为理的填。

The ultraviolet irradiated polypropylene (PP) with the oxygen polar groups on its chain was blended with the inorganic filler STC (Sericite-Tridymite-Cristobalite).

聚丙烯在室温、空气下,通过低能、短时间的紫外光辐照,在其分子链上引入了含氧的极性基团。

The vulcanization characteristics of a silicone rubber foam made by technology of removing inert filler used as foaming agent was investigated with curometer.

采用橡胶硫化仪研究了溶析成孔工艺制备的硅橡胶泡的硫化特性,分析讨论了硅橡胶的结构、成孔剂用量对硫化特性的影响规律。

Copper conductive adhesives were prepared using epoxy as matrix, the mixture of m-phenylenediamine and diaminodiphenylmethane as hardener, and copper particles as the conducting filler.

以环氧树脂为基体,间苯二胺和二氨基二苯甲烷的低融点混合物为固化剂,铜粉为导电填,制备了热固化各向同性导电胶。

Filler retention and drainability of wheat shaw pulp could be improved remarkably when PAC and PDADMAC were added as ATC before the addition of CPAM.

用PAC和PDADMAC作为阴离子捕捉剂可显著改善麦草浆的滤水性，提高其留着率。

A series of reversible thermochromic paints were prepared using different kinds of inorganic compounds as filler,cresol red as chromophoric reagent and boric acid as delomorphic reagent.

以甲酚红为发色剂,硼酸为显色剂,选择不同的无机填,制备出系列可逆热致变色颜。

Results showed that the oil removal effect of lipophilic filler is better than lipophobic filler, and the treatment processes can obtain satisfactory treatment effect without using any chemicals.

结果表明,亲油性聚结填的除油效果要好于疏油性填,水温与聚结负荷对除油效率有较大影响。在不投加任何药剂的情况下,试验处理流程可将聚合物驱采油废水处理到理效果。

The tubes are dumped in bulk into the hopper of a bottle unscrambler, which feeds them into an enclosed rotary volumetric filler.

该管的大量倾倒到漏斗的一瓶理瓶，其中饲成一个封闭旋转式容积灌装机。

For filler, we mixed epoxy wood rebuilder, following the manufacturer's instructions.

对于灌装机，氧木重建者混合后，制造商的明。

All fillers lowered the maximum exotherm.

所有填料都降低放热效应。

Thermoresistant saggers containing silicon carbide and granular filler were produced through slip casting in plaster mould.

模浇注法生产出了含碳化硅和粒状填料的耐热匣钵。

Application: It is the most ideal filler material of reburner , reacting furnace, filler furnace on oil and chemical industries.

是广大油、化工行业中转化炉、反应炉、填料塔中最为理想的填料。

The ultraviolet irradiated polypropylene (PP) with the oxygen polar groups on its chain was blended with the inorganic filler STC (Sericite-Tridymite-Cristobalite).

聚丙烯在室温、空气下,通过低能、短时间的紫外光辐照,在其分子链上引入了含氧的极性基团。

The vulcanization characteristics of a silicone rubber foam made by technology of removing inert filler used as foaming agent was investigated with curometer.

采橡胶硫化仪研究了溶析成孔工艺制备的硅橡胶泡沫材料的硫化特性,分析讨论了硅橡胶的结构、成孔剂量对硫化特性的影响规律。

Copper conductive adhesives were prepared using epoxy as matrix, the mixture of m-phenylenediamine and diaminodiphenylmethane as hardener, and copper particles as the conducting filler.

以氧树脂为基体,间苯二胺和二氨基二苯甲烷的低融点混合物为固化剂,铜粉为导电填料,制备了热固化各向同性导电胶。

Filler retention and drainability of wheat shaw pulp could be improved remarkably when PAC and PDADMAC were added as ATC before the addition of CPAM.

PAC和PDADMAC作为阴离子捕捉剂可显著改善麦草浆的滤水性，提高其留着率。

A series of reversible thermochromic paints were prepared using different kinds of inorganic compounds as filler,cresol red as chromophoric reagent and boric acid as delomorphic reagent.

以甲酚红为发色剂,硼酸为显色剂,选择不同的无机填料,制备出系列可逆热致变色颜料。

Results showed that the oil removal effect of lipophilic filler is better than lipophobic filler, and the treatment processes can obtain satisfactory treatment effect without using any chemicals.

结果表明,亲油性聚结填料的除油效果要好于疏油性填料,水温与聚结负荷对除油效率有较大影响。在不投加任何药剂的情况下,试验处理流程可将聚合物驱采油废水处理到理想效果。

The tubes are dumped in bulk into the hopper of a bottle unscrambler, which feeds them into an enclosed rotary volumetric filler.

该管的大量倾倒到漏斗的一瓶理瓶，其中饲料成一个封闭旋转式容积灌装机。

For filler, we mixed epoxy wood rebuilder, following the manufacturer's instructions.

对于灌装机，我们环氧木重建者混合，商的明。

All fillers lowered the maximum exotherm.

所有都降低放热效应。

Thermoresistant saggers containing silicon carbide and granular filler were produced through slip casting in plaster mould.

用石膏模浇注法生产出了含碳化硅和粒状的耐热匣钵。

Application: It is the most ideal filler material of reburner , reacting furnace, filler furnace on oil and chemical industries.

是广大石油、化工行业中转化炉、反应炉、塔中最为理想的。

The ultraviolet irradiated polypropylene (PP) with the oxygen polar groups on its chain was blended with the inorganic filler STC (Sericite-Tridymite-Cristobalite).

聚丙烯在室温、空气下,通过低能、短时间的紫外光辐照,在其分子链上引入了含氧的极性基团。

The vulcanization characteristics of a silicone rubber foam made by technology of removing inert filler used as foaming agent was investigated with curometer.

采用橡胶硫化仪研究了溶析成孔工艺备的硅橡胶泡沫材的硫化特性,分析讨论了硅橡胶的结构、成孔剂用量对硫化特性的影响规律。

Copper conductive adhesives were prepared using epoxy as matrix, the mixture of m-phenylenediamine and diaminodiphenylmethane as hardener, and copper particles as the conducting filler.

以环氧树脂为基体,间苯二胺和二氨基二苯甲烷的低融点混合物为固化剂,铜粉为导电,备了热固化各向同性导电胶。

Filler retention and drainability of wheat shaw pulp could be improved remarkably when PAC and PDADMAC were added as ATC before the addition of CPAM.

用PAC和PDADMAC作为阴离子捕捉剂可显著改善麦草浆的滤水性，提高其留着率。

A series of reversible thermochromic paints were prepared using different kinds of inorganic compounds as filler,cresol red as chromophoric reagent and boric acid as delomorphic reagent.

以甲酚红为发色剂,硼酸为显色剂,选择不同的无机,备出系列可逆热致变色颜。

Results showed that the oil removal effect of lipophilic filler is better than lipophobic filler, and the treatment processes can obtain satisfactory treatment effect without using any chemicals.

结果表明,亲油性聚结的除油效果要好于疏油性,水温与聚结负荷对除油效率有较大影响。在不投加任何药剂的情况下,试验处理流程可将聚合物驱采油废水处理到理想效果。

The tubes are dumped in bulk into the hopper of a bottle unscrambler, which feeds them into an enclosed rotary volumetric filler.

该管的大量倾倒到漏斗的一瓶理瓶，其中饲成一个封闭旋转式容积灌装机。

For filler, we mixed epoxy wood rebuilder, following the manufacturer's instructions.

对于灌装机，我们环氧木重建者混合后，制造商的明。

All fillers lowered the maximum exotherm.

所有填都降低放热效应。

Thermoresistant saggers containing silicon carbide and granular filler were produced through slip casting in plaster mould.

用石膏模浇注法生产出了含碳化硅和粒状填的耐热匣钵。

Application: It is the most ideal filler material of reburner , reacting furnace, filler furnace on oil and chemical industries.

是广大石油、化工行业化炉、反应炉、填塔最为理想的填。

The ultraviolet irradiated polypropylene (PP) with the oxygen polar groups on its chain was blended with the inorganic filler STC (Sericite-Tridymite-Cristobalite).

聚丙烯在室温、空气下,通过低能、短时间的紫外光辐照,在其分子链上引入了含氧的极性基团。

The vulcanization characteristics of a silicone rubber foam made by technology of removing inert filler used as foaming agent was investigated with curometer.

采用橡胶硫化仪研究了溶析成孔工艺制备的硅橡胶泡沫的硫化特性,分析讨论了硅橡胶的结构、成孔剂用量对硫化特性的影响规律。

Copper conductive adhesives were prepared using epoxy as matrix, the mixture of m-phenylenediamine and diaminodiphenylmethane as hardener, and copper particles as the conducting filler.

以环氧树脂为基体,间苯二胺和二氨基二苯甲烷的低融点混合物为固化剂,铜粉为导电填,制备了热固化各向同性导电胶。

Filler retention and drainability of wheat shaw pulp could be improved remarkably when PAC and PDADMAC were added as ATC before the addition of CPAM.

用PAC和PDADMAC作为阴离子捕捉剂可显著改善麦草浆的滤水性，提高其留着率。

A series of reversible thermochromic paints were prepared using different kinds of inorganic compounds as filler,cresol red as chromophoric reagent and boric acid as delomorphic reagent.

以甲酚红为发色剂,硼酸为显色剂,选择不同的无机填,制备出系列可逆热致变色颜。

Results showed that the oil removal effect of lipophilic filler is better than lipophobic filler, and the treatment processes can obtain satisfactory treatment effect without using any chemicals.

结果表明,亲油性聚结填的除油效果要好于疏油性填,水温与聚结负荷对除油效率有较大影响。在不投加任何药剂的情况下,试验处理流程可将聚合物驱采油废水处理到理想效果。

The tubes are dumped in bulk into the hopper of a bottle unscrambler, which feeds them into an enclosed rotary volumetric filler.

该管的大量倾倒到漏斗的一瓶理瓶，其饲成一个封闭旋式容积灌装机。