Efficacy measures include axial length, keratometric power and mean absolute refractive error.
有效测量值包括眼 长度,角膜
长度,角膜 率和绝对屈光误差值等内容。
率和绝对屈光误差值等内容。
 的;
的; 向的
向的 ;
;
 ;
; 向力
向力 流;
流; 向流动
向流动 向载荷;
向载荷; 向负荷;
向负荷; 向荷载
向荷载 向挤
向挤
 向
向 流式通风机;
流式通风机; 流式风扇;
流式风扇; 两扇风机
两扇风机 对称性
对称性 向速度,
向速度, 流速度
流速度 向应力;
向应力; 应力
应力 流风机;
流风机; 流式风扇
流式风扇 向位移
向位移 向应变
向应变 流式
流式 缩机
缩机 向推力
向推力 向长度
向长度 线
线 向移动
向移动 向间隙;纵向间隙;天地间隙
向间隙;纵向间隙;天地间隙 变形;
变形; 向形变,
向形变, 向变化
向变化 向载荷;
向载荷; 向加载
向加载Efficacy measures include axial length, keratometric power and mean absolute refractive error.
有效测量值包括眼 长度,角膜
长度,角膜 率和绝对屈光误差值等内容。
率和绝对屈光误差值等内容。
Fracture characteristics of axial tension of RCC layer surface are studied experimentally by servohydraulic closed-loop testing machine in laboratory.
利用电液伺服式试验机对有层面碾

 土试件进行
土试件进行 拉断裂试验研究。
拉断裂试验研究。
The finite element models of axial tension member and eccentrical tension members are established with ANSYS finite element program.
4、用通用有限元分析软件ANSYS建立了
 土
土 心和偏心受拉的有限元模型,进行分析并得到了受拉构件的应力云图、变形图及开裂图,并与理论分析结果进行了比较。
心和偏心受拉的有限元模型,进行分析并得到了受拉构件的应力云图、变形图及开裂图,并与理论分析结果进行了比较。
Objective: To discuss the axial image characters of spondyloschisis from vertebral articulations is the purpose of this article.
探讨腰椎椎弓峡部裂与椎间小关节在横断图像上的影像学特征。
A two-gap drift tube buncher and a one-gap grid buncher with linear bunching waveform are used on the SFC axial injection line.
SFC 向注入线采用了一个双间隙漂移管式聚束器和一个单间隙栅网型聚束器,分别采用三角波和锯齿波的聚束波形。
向注入线采用了一个双间隙漂移管式聚束器和一个单间隙栅网型聚束器,分别采用三角波和锯齿波的聚束波形。
In general,the cylindrical roller bearings, belonging to axial discerptible bearing,are suitable only for sustaining radial loads.The contact of roller with race is linear.
圆柱滚子 承一般只用于承受径向负荷,滚子与套圈滚道为线性接触,属
承一般只用于承受径向负荷,滚子与套圈滚道为线性接触,属 向可分离型
向可分离型 承。
承。
Abstract: A two-gap drift tube buncher and a one-gap grid buncher with linear bunching waveform are used on the SFC axial injection line.
SFC 向注入线采用了一个双间隙漂移管式聚束器和一个单间隙栅网型聚束器,分别采用三角波和锯齿波的聚束波形。
向注入线采用了一个双间隙漂移管式聚束器和一个单间隙栅网型聚束器,分别采用三角波和锯齿波的聚束波形。
The soft-stiff rings of the experimental box are used to ensure axial softness and radial stiffness; the veridical experiments simulate better the one-dimensional plane strain motion.
由于采用了软硬环试验箱体以保证箱体的 向柔性及径向刚性技术,验证性试验比较好地模拟了介质的一维平面应变运动。
向柔性及径向刚性技术,验证性试验比较好地模拟了介质的一维平面应变运动。
With greater axial and radial load rating capacity, good replaceability of components. The shaft can be adjusted through external hexogan then to adjust the axial part dimension.
 承径向和
承径向和 向的承载能力都比较大,各配件可替换性强。
向的承载能力都比较大,各配件可替换性强。 承通过调节偏心外六角来调整芯
承通过调节偏心外六角来调整芯 位置进而达到调整侧滚轮
位置进而达到调整侧滚轮 向尺寸的目的。
向尺寸的目的。
Rapid application of an axial force completes the upset welds.The localized heating is in high current, low voltage pulses for which a homopolar welding generator is utilized.
Electric resistance welding provides localized heating for simultaneous upset welding of the copper bars and copper end rings of an electric motor cage rotor assembly.
Abstract:The exterior tube structure exerts radial outward forces, and the diagrid columns have significant difference in axial force.Both result in large axial tension forces in ring beams.
[摘要]重力荷载作用下网筒结构外鼓及交叉柱间 力差异将使环梁受到较大的拉力。
力差异将使环梁受到较大的拉力。
In order to achieve the fabrication of noninvolute beveloid gears with crossed axes by using the existing machine tools, the tooth profile errors and axial errors should be studied.
很多进口机械中应用了交错 非渐开线变厚齿轮传动,目前国内在该领域的研究还是空白。
非渐开线变厚齿轮传动,目前国内在该领域的研究还是空白。
It is put forward in this paper that the residual strength of overconsolidated soil can be determined by normal routine triaxial testing if its axial load can be controlled exactly.
如果能够准确控制 向荷重,对超固结土可在常规三
向荷重,对超固结土可在常规三 仪中测定出残余强度。
仪中测定出残余强度。
By observation and analysis of the test data, changing the plate steel endshield of motor into the disc iron one can improve the rigidness of endshield, and reduce the axial vibration of motor.
通过观察和检测数据分析,电动机的平板式钢板端盖改为盘式铸铁端盖,可提高端盖刚度,降低电机 向振动。
向振动。
声明:以上例句、词性分类均由互联网资源自动生成,部分未经过人工审核,其表达内容亦不代表本软件的观点;若发现问题,欢迎向我们指正。
 的;
的;
 的
的 的;
的; 的;
的; ;
; 的;
的;
 力
力 流;
流;
 流动
流动
 载
载 ;
;
 负
负 ;
;

 载
载
 挤压
挤压

 流式通风机;
流式通风机; 流式风扇;
流式风扇; 两扇风机
两扇风机
 称性
称性
 速度,
速度, 流速度
流速度
 应力;
应力; 应力
应力 流风机;
流风机; 流式风扇
流式风扇
 位移
位移
 应变
应变 流式压缩机
流式压缩机
 推力
推力
 长度
长度 线
线
 移动
移动
 间隙;纵
间隙;纵 间隙;天地间隙
间隙;天地间隙 变形;
变形;
 形变,
形变,
 变化
变化
 载
载 ;
;
 加载
加载Efficacy measures include axial length, keratometric power and mean absolute refractive error.
有效测量值包括眼 长度,角膜曲率和
长度,角膜曲率和

 光误差值等内容。
光误差值等内容。
Fracture characteristics of axial tension of RCC layer surface are studied experimentally by servohydraulic closed-loop testing machine in laboratory.
利用电液伺服式试验机 有层面碾压混凝土试件进行
有层面碾压混凝土试件进行 拉断裂试验研究。
拉断裂试验研究。
The finite element models of axial tension member and eccentrical tension members are established with ANSYS finite element program.
4、用通用有限元分析软件ANSYS建立了混凝土 心和偏心受拉的有限元模型,进行分析并得到了受拉构件的应力云图、变形图及开裂图,并与理论分析结果进行了比较。
心和偏心受拉的有限元模型,进行分析并得到了受拉构件的应力云图、变形图及开裂图,并与理论分析结果进行了比较。
Objective: To discuss the axial image characters of spondyloschisis from vertebral articulations is the purpose of this article.
探讨腰椎椎弓峡部裂与椎间小关节在横断图像上的影像学特征。
A two-gap drift tube buncher and a one-gap grid buncher with linear bunching waveform are used on the SFC axial injection line.
SFC
 注入线采用了一个双间隙漂移管式聚束器和一个单间隙栅网型聚束器,分别采用三角波和锯齿波的聚束波形。
注入线采用了一个双间隙漂移管式聚束器和一个单间隙栅网型聚束器,分别采用三角波和锯齿波的聚束波形。
In general,the cylindrical roller bearings, belonging to axial discerptible bearing,are suitable only for sustaining radial loads.The contact of roller with race is linear.
圆柱滚子 承一般只用于承受径
承一般只用于承受径 负
负 ,滚子与套圈滚道为线性接触,属
,滚子与套圈滚道为线性接触,属
 可分离型
可分离型 承。
承。
Abstract: A two-gap drift tube buncher and a one-gap grid buncher with linear bunching waveform are used on the SFC axial injection line.
SFC
 注入线采用了一个双间隙漂移管式聚束器和一个单间隙栅网型聚束器,分别采用三角波和锯齿波的聚束波形。
注入线采用了一个双间隙漂移管式聚束器和一个单间隙栅网型聚束器,分别采用三角波和锯齿波的聚束波形。
The soft-stiff rings of the experimental box are used to ensure axial softness and radial stiffness; the veridical experiments simulate better the one-dimensional plane strain motion.
由于采用了软硬环试验箱体以保证箱体的
 柔性及径
柔性及径 刚性技术,验证性试验比较好地模拟了介质的一维平面应变运动。
刚性技术,验证性试验比较好地模拟了介质的一维平面应变运动。
With greater axial and radial load rating capacity, good replaceability of components. The shaft can be adjusted through external hexogan then to adjust the axial part dimension.
 承径
承径 和
和
 的承载能力都比较大,各配件可替换性强。
的承载能力都比较大,各配件可替换性强。 承通过调节偏心外六角来调整芯
承通过调节偏心外六角来调整芯 位置进而达到调整侧滚轮
位置进而达到调整侧滚轮
 尺寸的目的。
尺寸的目的。
Rapid application of an axial force completes the upset welds.The localized heating is in high current, low voltage pulses for which a homopolar welding generator is utilized.
Electric resistance welding provides localized heating for simultaneous upset welding of the copper bars and copper end rings of an electric motor cage rotor assembly.
Abstract:The exterior tube structure exerts radial outward forces, and the diagrid columns have significant difference in axial force.Both result in large axial tension forces in ring beams.
[摘要]重力 载作用下网筒结构外鼓及交叉柱间
载作用下网筒结构外鼓及交叉柱间 力差异将使环梁受到较大的拉力。
力差异将使环梁受到较大的拉力。
In order to achieve the fabrication of noninvolute beveloid gears with crossed axes by using the existing machine tools, the tooth profile errors and axial errors should be studied.
很多进口机械中应用了交错 非渐开线变厚齿轮传动,目前国内在该领域的研究还是空白。
非渐开线变厚齿轮传动,目前国内在该领域的研究还是空白。
It is put forward in this paper that the residual strength of overconsolidated soil can be determined by normal routine triaxial testing if its axial load can be controlled exactly.
如果能够准确控制

 重,
重, 超固结土可在常规三
超固结土可在常规三 仪中测定出残余强度。
仪中测定出残余强度。
By observation and analysis of the test data, changing the plate steel endshield of motor into the disc iron one can improve the rigidness of endshield, and reduce the axial vibration of motor.
通过观察和检测数据分析,电动机的平板式钢板端盖改为盘式铸铁端盖,可提高端盖刚度,降低电机
 振动。
振动。
声明:以上例句、词性分类均由互联网资源自动生成,部分未经过人工审核,其表达内容亦不代表本软件的观点;若发现问题,欢迎 我们指正。
我们指正。
 的;
的; 向的
向的 ;
; 向力
向力 流;
流; 向流动
向流动 向载荷;
向载荷; 向负荷;
向负荷; 向荷载
向荷载 向挤压
向挤压 向
向 流式通风机;
流式通风机; 流式风扇;
流式风扇; 两扇风机
两扇风机
 称性
称性 向速度,
向速度, 流速度
流速度 向应力;
向应力; 应力
应力 流风机;
流风机; 流式风扇
流式风扇 向位移
向位移 向应变
向应变 流式压缩机
流式压缩机 向推力
向推力 向长度
向长度 线
线 向移动
向移动 向间隙;纵向间隙;天地间隙
向间隙;纵向间隙;天地间隙 变形;
变形; 向形变,
向形变, 向变化
向变化 向载荷;
向载荷; 向加载
向加载Efficacy measures include axial length, keratometric power and mean absolute refractive error.
有效测量值包括眼 长度,角膜曲率和绝
长度,角膜曲率和绝 屈光误差值等内容。
屈光误差值等内容。
Fracture characteristics of axial tension of RCC layer surface are studied experimentally by servohydraulic closed-loop testing machine in laboratory.
利 电液伺服式试验机
电液伺服式试验机 有
有 面碾压混凝土试件进行
面碾压混凝土试件进行 拉断裂试验研究。
拉断裂试验研究。
The finite element models of axial tension member and eccentrical tension members are established with ANSYS finite element program.
4、 通
通 有限元分析软件ANSYS建立了混凝土
有限元分析软件ANSYS建立了混凝土 心和偏心受拉的有限元模型,进行分析并得到了受拉构件的应力云图、变形图及开裂图,并与理论分析结果进行了比较。
心和偏心受拉的有限元模型,进行分析并得到了受拉构件的应力云图、变形图及开裂图,并与理论分析结果进行了比较。
Objective: To discuss the axial image characters of spondyloschisis from vertebral articulations is the purpose of this article.
探讨腰椎椎弓峡部裂与椎间小关节在横断图像上的影像学特征。
A two-gap drift tube buncher and a one-gap grid buncher with linear bunching waveform are used on the SFC axial injection line.
SFC 向注入线采
向注入线采 了一个双间隙漂移管式聚束器和一个单间隙栅网型聚束器,分别采
了一个双间隙漂移管式聚束器和一个单间隙栅网型聚束器,分别采 三角波和锯齿波的聚束波形。
三角波和锯齿波的聚束波形。
In general,the cylindrical roller bearings, belonging to axial discerptible bearing,are suitable only for sustaining radial loads.The contact of roller with race is linear.
圆柱滚子 承一般只
承一般只 于承受径向负荷,滚子与套圈滚道为线性接触,属
于承受径向负荷,滚子与套圈滚道为线性接触,属 向可分离型
向可分离型 承。
承。
Abstract: A two-gap drift tube buncher and a one-gap grid buncher with linear bunching waveform are used on the SFC axial injection line.
SFC 向注入线采
向注入线采 了一个双间隙漂移管式聚束器和一个单间隙栅网型聚束器,分别采
了一个双间隙漂移管式聚束器和一个单间隙栅网型聚束器,分别采 三角波和锯齿波的聚束波形。
三角波和锯齿波的聚束波形。
The soft-stiff rings of the experimental box are used to ensure axial softness and radial stiffness; the veridical experiments simulate better the one-dimensional plane strain motion.
由于采 了软硬环试验箱体以保证箱体的
了软硬环试验箱体以保证箱体的 向柔性及径向刚性技术,验证性试验比较好地模拟了介质的一维平面应变运动。
向柔性及径向刚性技术,验证性试验比较好地模拟了介质的一维平面应变运动。
With greater axial and radial load rating capacity, good replaceability of components. The shaft can be adjusted through external hexogan then to adjust the axial part dimension.
 承径向和
承径向和 向的承载能力都比较大,各配件可替换性强。
向的承载能力都比较大,各配件可替换性强。 承通过调节偏心外六角来调整芯
承通过调节偏心外六角来调整芯 位置进而达到调整侧滚轮
位置进而达到调整侧滚轮 向尺寸的目的。
向尺寸的目的。
Rapid application of an axial force completes the upset welds.The localized heating is in high current, low voltage pulses for which a homopolar welding generator is utilized.
Electric resistance welding provides localized heating for simultaneous upset welding of the copper bars and copper end rings of an electric motor cage rotor assembly.
Abstract:The exterior tube structure exerts radial outward forces, and the diagrid columns have significant difference in axial force.Both result in large axial tension forces in ring beams.
[摘要]重力荷载作 下网筒结构外鼓及交叉柱间
下网筒结构外鼓及交叉柱间 力差异将使环梁受到较大的拉力。
力差异将使环梁受到较大的拉力。
In order to achieve the fabrication of noninvolute beveloid gears with crossed axes by using the existing machine tools, the tooth profile errors and axial errors should be studied.
很多进口机械中应 了交错
了交错 非渐开线变厚齿轮传动,目前国内在该领域的研究还是空白。
非渐开线变厚齿轮传动,目前国内在该领域的研究还是空白。
It is put forward in this paper that the residual strength of overconsolidated soil can be determined by normal routine triaxial testing if its axial load can be controlled exactly.
如果能够准确控制 向荷重,
向荷重, 超固结土可在常规三
超固结土可在常规三 仪中测定出残余强度。
仪中测定出残余强度。
By observation and analysis of the test data, changing the plate steel endshield of motor into the disc iron one can improve the rigidness of endshield, and reduce the axial vibration of motor.
通过观察和检测数据分析,电动机的平板式钢板端盖改为盘式铸铁端盖,可提高端盖刚度,降低电机 向振动。
向振动。
声明:以上例句、词性分类均由互联网资源自动生成,部分未经过人工审核,其表达内容亦不代表本软件的观点;若发现问题,欢迎向我们指正。
 的;
的; 向的
向的
 词
词 ;
; 向力
向力 流;
流; 向流动
向流动 向载荷;
向载荷; 向负荷;
向负荷; 向荷载
向荷载 向挤压
向挤压 向
向 流式通风机;
流式通风机; 流式风扇;
流式风扇; 两扇风机
两扇风机 对称性
对称性 向速度,
向速度, 流速度
流速度 向应力;
向应力; 应力
应力 流风机;
流风机; 流式风扇
流式风扇 向位移
向位移 向应变
向应变 流式压缩机
流式压缩机 向推力
向推力 向长度
向长度 线
线 向移动
向移动 向间隙;纵向间隙;天地间隙
向间隙;纵向间隙;天地间隙 变形;
变形; 向形变,
向形变, 向变化
向变化 向载荷;
向载荷; 向加载
向加载Efficacy measures include axial length, keratometric power and mean absolute refractive error.
有效测量值包括眼 长度,角膜曲率和绝对屈光误差值等内容。
长度,角膜曲率和绝对屈光误差值等内容。
Fracture characteristics of axial tension of RCC layer surface are studied experimentally by servohydraulic closed-loop testing machine in laboratory.
利用电液伺服式试验机对有层面碾压混凝土试件进行 拉断裂试验研究。
拉断裂试验研究。
The finite element models of axial tension member and eccentrical tension members are established with ANSYS finite element program.
4、用通用有限元
 软件ANSYS建立了混凝土
软件ANSYS建立了混凝土 心和偏心受拉的有限元模型,进行
心和偏心受拉的有限元模型,进行

 得到了受拉构件的应力云图、变形图及开裂图,
得到了受拉构件的应力云图、变形图及开裂图, 与理论
与理论
 结果进行了比较。
结果进行了比较。
Objective: To discuss the axial image characters of spondyloschisis from vertebral articulations is the purpose of this article.
探讨腰椎椎弓峡部裂与椎间小关节在横断图像上的影像学特征。
A two-gap drift tube buncher and a one-gap grid buncher with linear bunching waveform are used on the SFC axial injection line.
SFC 向注入线采用了一个双间隙漂移管式聚束器和一个单间隙栅网型聚束器,
向注入线采用了一个双间隙漂移管式聚束器和一个单间隙栅网型聚束器, 别采用三角波和锯齿波的聚束波形。
别采用三角波和锯齿波的聚束波形。
In general,the cylindrical roller bearings, belonging to axial discerptible bearing,are suitable only for sustaining radial loads.The contact of roller with race is linear.
圆柱滚子 承一般只用于承受径向负荷,滚子与套圈滚道为线性接触,属
承一般只用于承受径向负荷,滚子与套圈滚道为线性接触,属 向可
向可 离型
离型 承。
承。
Abstract: A two-gap drift tube buncher and a one-gap grid buncher with linear bunching waveform are used on the SFC axial injection line.
SFC 向注入线采用了一个双间隙漂移管式聚束器和一个单间隙栅网型聚束器,
向注入线采用了一个双间隙漂移管式聚束器和一个单间隙栅网型聚束器, 别采用三角波和锯齿波的聚束波形。
别采用三角波和锯齿波的聚束波形。
The soft-stiff rings of the experimental box are used to ensure axial softness and radial stiffness; the veridical experiments simulate better the one-dimensional plane strain motion.
由于采用了软硬环试验箱体以保证箱体的 向柔性及径向刚性技术,验证性试验比较好地模拟了介质的一维平面应变运动。
向柔性及径向刚性技术,验证性试验比较好地模拟了介质的一维平面应变运动。
With greater axial and radial load rating capacity, good replaceability of components. The shaft can be adjusted through external hexogan then to adjust the axial part dimension.
 承径向和
承径向和 向的承载能力都比较大,各配件可替换性强。
向的承载能力都比较大,各配件可替换性强。 承通过调节偏心外六角来调整芯
承通过调节偏心外六角来调整芯 位置进而达到调整侧滚轮
位置进而达到调整侧滚轮 向尺寸的目的。
向尺寸的目的。
Rapid application of an axial force completes the upset welds.The localized heating is in high current, low voltage pulses for which a homopolar welding generator is utilized.
Electric resistance welding provides localized heating for simultaneous upset welding of the copper bars and copper end rings of an electric motor cage rotor assembly.
Abstract:The exterior tube structure exerts radial outward forces, and the diagrid columns have significant difference in axial force.Both result in large axial tension forces in ring beams.
[摘要]重力荷载作用下网筒结构外鼓及交叉柱间 力差异将使环梁受到较大的拉力。
力差异将使环梁受到较大的拉力。
In order to achieve the fabrication of noninvolute beveloid gears with crossed axes by using the existing machine tools, the tooth profile errors and axial errors should be studied.
很多进口机械中应用了交错 非渐开线变厚齿轮传动,目前国内在该领域的研究还是空白。
非渐开线变厚齿轮传动,目前国内在该领域的研究还是空白。
It is put forward in this paper that the residual strength of overconsolidated soil can be determined by normal routine triaxial testing if its axial load can be controlled exactly.
如果能够准确控制 向荷重,对超固结土可在常规三
向荷重,对超固结土可在常规三 仪中测定出残余强度。
仪中测定出残余强度。
By observation and analysis of the test data, changing the plate steel endshield of motor into the disc iron one can improve the rigidness of endshield, and reduce the axial vibration of motor.
通过观察和检测数据
 ,电动机的平板式钢板端盖改为盘式铸铁端盖,可提高端盖刚度,降低电机
,电动机的平板式钢板端盖改为盘式铸铁端盖,可提高端盖刚度,降低电机 向振动。
向振动。
声明:以上例句、词性 类均由互
类均由互 网资源自动生成,部
网资源自动生成,部 未经过人工审核,其表达内容亦不代表本软件的观点;若发现问题,欢迎向我们指正。
未经过人工审核,其表达内容亦不代表本软件的观点;若发现问题,欢迎向我们指正。

 ;
; 向
向
 ;
; ;
; ,有环
,有环
 ;
; 旋形
旋形 ;
; ,横向
,横向 ;
; ;
; ,纵向
,纵向 ;
; ,轮流
,轮流 ;
; ;
; 向力
向力 流;
流; 向流动
向流动 向载荷;
向载荷; 向负荷;
向负荷; 向荷载
向荷载 向挤压
向挤压 向
向 流式通风机;
流式通风机; 流式风扇;
流式风扇; 两扇风机
两扇风机 对称性
对称性 向速度,
向速度, 流速度
流速度 向应力;
向应力; 应力
应力 流风机;
流风机; 流式风扇
流式风扇 向位移
向位移 向应变
向应变 流式压缩机
流式压缩机 向推力
向推力 向长度
向长度 线
线 向移动
向移动 向间隙;纵向间隙;天地间隙
向间隙;纵向间隙;天地间隙 变形;
变形; 向形变,
向形变, 向变化
向变化 向载荷;
向载荷; 向加载
向加载Efficacy measures include axial length, keratometric power and mean absolute refractive error.
有效测量值包括眼 长度,角膜曲率
长度,角膜曲率 绝对屈光误差值等内容。
绝对屈光误差值等内容。
Fracture characteristics of axial tension of RCC layer surface are studied experimentally by servohydraulic closed-loop testing machine in laboratory.
利用电液伺服式试验机对有层面碾压混凝土试件进行 拉断裂试验研究。
拉断裂试验研究。
The finite element models of axial tension member and eccentrical tension members are established with ANSYS finite element program.
4、用通用有限元分析软件ANSYS建立了混凝土



 受拉
受拉 有限元模型,进行分析并得到了受拉构件
有限元模型,进行分析并得到了受拉构件 应力云图、变形图及开裂图,并与理论分析结果进行了比较。
应力云图、变形图及开裂图,并与理论分析结果进行了比较。
Objective: To discuss the axial image characters of spondyloschisis from vertebral articulations is the purpose of this article.
探讨腰椎椎弓峡部裂与椎间小关节在横断图像上 影像学特征。
影像学特征。
A two-gap drift tube buncher and a one-gap grid buncher with linear bunching waveform are used on the SFC axial injection line.
SFC 向注入线采用了一个双间隙漂移管式聚束器
向注入线采用了一个双间隙漂移管式聚束器 一个单间隙栅网型聚束器,分别采用三角波
一个单间隙栅网型聚束器,分别采用三角波 锯齿波
锯齿波 聚束波形。
聚束波形。
In general,the cylindrical roller bearings, belonging to axial discerptible bearing,are suitable only for sustaining radial loads.The contact of roller with race is linear.
圆柱滚子 承一般只用于承受径向负荷,滚子与套圈滚道为线性接触,属
承一般只用于承受径向负荷,滚子与套圈滚道为线性接触,属 向可分离型
向可分离型 承。
承。
Abstract: A two-gap drift tube buncher and a one-gap grid buncher with linear bunching waveform are used on the SFC axial injection line.
SFC 向注入线采用了一个双间隙漂移管式聚束器
向注入线采用了一个双间隙漂移管式聚束器 一个单间隙栅网型聚束器,分别采用三角波
一个单间隙栅网型聚束器,分别采用三角波 锯齿波
锯齿波 聚束波形。
聚束波形。
The soft-stiff rings of the experimental box are used to ensure axial softness and radial stiffness; the veridical experiments simulate better the one-dimensional plane strain motion.
由于采用了软硬环试验箱体以保证箱体
 向柔性及径向刚性技术,验证性试验比较好地模拟了介质
向柔性及径向刚性技术,验证性试验比较好地模拟了介质 一维平面应变运动。
一维平面应变运动。
With greater axial and radial load rating capacity, good replaceability of components. The shaft can be adjusted through external hexogan then to adjust the axial part dimension.
 承径向
承径向
 向
向 承载能力都比较大,各配件可替换性强。
承载能力都比较大,各配件可替换性强。 承通过调节
承通过调节
 外六角来调整芯
外六角来调整芯 位置进而达到调整侧滚轮
位置进而达到调整侧滚轮 向尺寸
向尺寸 目
目 。
。
Rapid application of an axial force completes the upset welds.The localized heating is in high current, low voltage pulses for which a homopolar welding generator is utilized.
Electric resistance welding provides localized heating for simultaneous upset welding of the copper bars and copper end rings of an electric motor cage rotor assembly.
Abstract:The exterior tube structure exerts radial outward forces, and the diagrid columns have significant difference in axial force.Both result in large axial tension forces in ring beams.
[摘要]重力荷载作用下网筒结构外鼓及交叉柱间 力差异将使环梁受到较大
力差异将使环梁受到较大 拉力。
拉力。
In order to achieve the fabrication of noninvolute beveloid gears with crossed axes by using the existing machine tools, the tooth profile errors and axial errors should be studied.
很多进口机械中应用了交错 非渐开线变厚齿轮传动,目前国内在该领域
非渐开线变厚齿轮传动,目前国内在该领域 研究还是空白。
研究还是空白。
It is put forward in this paper that the residual strength of overconsolidated soil can be determined by normal routine triaxial testing if its axial load can be controlled exactly.
如果能够准确控制 向荷重,对超固结土可在常规三
向荷重,对超固结土可在常规三 仪中测定出残余强度。
仪中测定出残余强度。
By observation and analysis of the test data, changing the plate steel endshield of motor into the disc iron one can improve the rigidness of endshield, and reduce the axial vibration of motor.
通过观察 检测数据分析,电动机
检测数据分析,电动机 平板式钢板端盖改为盘式铸铁端盖,可提高端盖刚度,降低电机
平板式钢板端盖改为盘式铸铁端盖,可提高端盖刚度,降低电机 向振动。
向振动。
声明:以上例句、词性分类均由互联网资源自动生成,部分未经过人工审核,其表达内容亦不代表本软件 观点;若发现问题,欢迎向我们指正。
观点;若发现问题,欢迎向我们指正。

 ;
;


 ;
;

 ;
; ,有环纹
,有环纹 ;
; ;
; ,
,

 ;
; ;
; ,纵
,纵
 ;
; ,轮流
,轮流 ;
; ;
;
 力
力 流;
流;
 流动
流动
 载荷;
载荷;
 负荷;
负荷;
 荷载
荷载
 挤压
挤压

 流式通风机;
流式通风机; 流式风扇;
流式风扇; 两扇风机
两扇风机 对称性
对称性
 速度,
速度, 流速度
流速度
 应力;
应力; 应力
应力 流风机;
流风机; 流式风扇
流式风扇
 位移
位移
 应变
应变 流式压缩机
流式压缩机
 推力
推力
 长度
长度 线
线
 移动
移动
 间隙;纵
间隙;纵 间隙;天地间隙
间隙;天地间隙 变形;
变形;
 形变,
形变,
 变化
变化
 载荷;
载荷;
 加载
加载Efficacy measures include axial length, keratometric power and mean absolute refractive error.
有效测量值包括眼 长度,角膜曲率和绝对屈光误差值等内容。
长度,角膜曲率和绝对屈光误差值等内容。
Fracture characteristics of axial tension of RCC layer surface are studied experimentally by servohydraulic closed-loop testing machine in laboratory.
利用电液伺服式试验机对有层面碾压混凝土试件进行 拉断裂试验研究。
拉断裂试验研究。
The finite element models of axial tension member and eccentrical tension members are established with ANSYS finite element program.
4、用通用有限 分析软件ANSYS建立了混凝土
分析软件ANSYS建立了混凝土 心和偏心受拉
心和偏心受拉 有限
有限

 ,进行分析并得到了受拉构件
,进行分析并得到了受拉构件 应力云图、变形图及开裂图,并与理论分析结果进行了比较。
应力云图、变形图及开裂图,并与理论分析结果进行了比较。
Objective: To discuss the axial image characters of spondyloschisis from vertebral articulations is the purpose of this article.
探讨腰椎椎弓峡部裂与椎间小关节在 断图像上
断图像上 影像学特征。
影像学特征。
A two-gap drift tube buncher and a one-gap grid buncher with linear bunching waveform are used on the SFC axial injection line.
SFC
 注入线采用了一个双间隙漂移管式聚束器和一个单间隙栅网
注入线采用了一个双间隙漂移管式聚束器和一个单间隙栅网 聚束器,分别采用三角波和锯齿波
聚束器,分别采用三角波和锯齿波 聚束波形。
聚束波形。
In general,the cylindrical roller bearings, belonging to axial discerptible bearing,are suitable only for sustaining radial loads.The contact of roller with race is linear.
圆柱滚子 承一般只用于承受径
承一般只用于承受径 负荷,滚子与套圈滚道为线性接触,属
负荷,滚子与套圈滚道为线性接触,属
 可分离
可分离
 承。
承。
Abstract: A two-gap drift tube buncher and a one-gap grid buncher with linear bunching waveform are used on the SFC axial injection line.
SFC
 注入线采用了一个双间隙漂移管式聚束器和一个单间隙栅网
注入线采用了一个双间隙漂移管式聚束器和一个单间隙栅网 聚束器,分别采用三角波和锯齿波
聚束器,分别采用三角波和锯齿波 聚束波形。
聚束波形。
The soft-stiff rings of the experimental box are used to ensure axial softness and radial stiffness; the veridical experiments simulate better the one-dimensional plane strain motion.
由于采用了软硬环试验箱体以保证箱体

 柔性及径
柔性及径 刚性技术,验证性试验比较好地
刚性技术,验证性试验比较好地 拟了介质
拟了介质 一维平面应变运动。
一维平面应变运动。
With greater axial and radial load rating capacity, good replaceability of components. The shaft can be adjusted through external hexogan then to adjust the axial part dimension.
 承径
承径 和
和

 承载能力都比较大,各配件可替换性强。
承载能力都比较大,各配件可替换性强。 承通过调节偏心外六角来调整芯
承通过调节偏心外六角来调整芯 位置进而达到调整侧滚轮
位置进而达到调整侧滚轮
 尺寸
尺寸 目
目 。
。
Rapid application of an axial force completes the upset welds.The localized heating is in high current, low voltage pulses for which a homopolar welding generator is utilized.
Electric resistance welding provides localized heating for simultaneous upset welding of the copper bars and copper end rings of an electric motor cage rotor assembly.
Abstract:The exterior tube structure exerts radial outward forces, and the diagrid columns have significant difference in axial force.Both result in large axial tension forces in ring beams.
[摘要]重力荷载作用下网筒结构外鼓及交叉柱间 力差异将使环梁受到较大
力差异将使环梁受到较大 拉力。
拉力。
In order to achieve the fabrication of noninvolute beveloid gears with crossed axes by using the existing machine tools, the tooth profile errors and axial errors should be studied.
很多进口机械中应用了交错 非渐开线变厚齿轮传动,目前国内在该领域
非渐开线变厚齿轮传动,目前国内在该领域 研究还是空白。
研究还是空白。
It is put forward in this paper that the residual strength of overconsolidated soil can be determined by normal routine triaxial testing if its axial load can be controlled exactly.
如果能够准确控制
 荷重,对超固结土可在常规三
荷重,对超固结土可在常规三 仪中测定出残余强度。
仪中测定出残余强度。
By observation and analysis of the test data, changing the plate steel endshield of motor into the disc iron one can improve the rigidness of endshield, and reduce the axial vibration of motor.
通过观察和检测数据分析,电动机 平板式钢板端盖改为盘式铸铁端盖,可提高端盖刚度,降低电机
平板式钢板端盖改为盘式铸铁端盖,可提高端盖刚度,降低电机
 振动。
振动。
声明:以上例句、词性分类均由互联网资源自动生成,部分未经过人工审核,其表达内容亦不代表本软件 观点;若发现问题,欢迎
观点;若发现问题,欢迎 我们指正。
我们指正。

 ;
; 向
向
 ;
; ;
; ,有环纹
,有环纹 ;
; ;
; ,横向
,横向 ;
; ;
; ,纵向
,纵向 ;
; ,轮
,轮
 ;
; 柱形
柱形 ;
; 向力
向力
 ;
; 向
向 动
动 向载荷;
向载荷; 向负荷;
向负荷; 向荷载
向荷载 向挤压
向挤压 向
向
 式通风机;
式通风机;
 式风扇;
式风扇; 两扇风机
两扇风机 对称性
对称性 向速度,
向速度,
 速度
速度 向应力;
向应力; 应力
应力
 风机;
风机;
 式风扇
式风扇 向位移
向位移 向应变
向应变
 式压缩机
式压缩机 向推力
向推力 向长度
向长度 线
线 向移动
向移动 向间隙;纵向间隙;天地间隙
向间隙;纵向间隙;天地间隙 变形;
变形; 向形变,
向形变, 向变化
向变化 向载荷;
向载荷; 向加载
向加载Efficacy measures include axial length, keratometric power and mean absolute refractive error.
有效测量值包括眼 长度,角膜曲率和绝对屈光误差值等内容。
长度,角膜曲率和绝对屈光误差值等内容。
Fracture characteristics of axial tension of RCC layer surface are studied experimentally by servohydraulic closed-loop testing machine in laboratory.
利用电液伺服式试验机对有层面碾压混凝土试件

 拉断裂试验研究。
拉断裂试验研究。
The finite element models of axial tension member and eccentrical tension members are established with ANSYS finite element program.
4、用通用有限元分析软件ANSYS建立了混凝土 心和偏心受拉
心和偏心受拉 有限元模型,
有限元模型,
 分析并得到了受拉构件
分析并得到了受拉构件 应力云图、变形图及开裂图,并与理论分析结果
应力云图、变形图及开裂图,并与理论分析结果
 了比较。
了比较。
Objective: To discuss the axial image characters of spondyloschisis from vertebral articulations is the purpose of this article.
探讨腰椎椎弓峡部裂与椎间小关节在横断图像上 影像学特征。
影像学特征。
A two-gap drift tube buncher and a one-gap grid buncher with linear bunching waveform are used on the SFC axial injection line.
SFC 向注入线采用了一个双间隙漂移管式聚束器和一个单间隙栅网型聚束器,分别采用三角波和锯齿波
向注入线采用了一个双间隙漂移管式聚束器和一个单间隙栅网型聚束器,分别采用三角波和锯齿波 聚束波形。
聚束波形。
In general,the cylindrical roller bearings, belonging to axial discerptible bearing,are suitable only for sustaining radial loads.The contact of roller with race is linear.
 柱滚子
柱滚子 承一般只用于承受径向负荷,滚子与套圈滚道为线性接触,属
承一般只用于承受径向负荷,滚子与套圈滚道为线性接触,属 向可分离型
向可分离型 承。
承。
Abstract: A two-gap drift tube buncher and a one-gap grid buncher with linear bunching waveform are used on the SFC axial injection line.
SFC 向注入线采用了一个双间隙漂移管式聚束器和一个单间隙栅网型聚束器,分别采用三角波和锯齿波
向注入线采用了一个双间隙漂移管式聚束器和一个单间隙栅网型聚束器,分别采用三角波和锯齿波 聚束波形。
聚束波形。
The soft-stiff rings of the experimental box are used to ensure axial softness and radial stiffness; the veridical experiments simulate better the one-dimensional plane strain motion.
由于采用了软硬环试验箱体以保证箱体
 向柔性及径向刚性技术,验证性试验比较好地模拟了介质
向柔性及径向刚性技术,验证性试验比较好地模拟了介质 一维平面应变运动。
一维平面应变运动。
With greater axial and radial load rating capacity, good replaceability of components. The shaft can be adjusted through external hexogan then to adjust the axial part dimension.
 承径向和
承径向和 向
向 承载能力都比较大,各配件可替换性强。
承载能力都比较大,各配件可替换性强。 承通过调节偏心外六角来调整芯
承通过调节偏心外六角来调整芯 位置
位置 而达到调整侧滚轮
而达到调整侧滚轮 向尺寸
向尺寸 目
目 。
。
Rapid application of an axial force completes the upset welds.The localized heating is in high current, low voltage pulses for which a homopolar welding generator is utilized.
Electric resistance welding provides localized heating for simultaneous upset welding of the copper bars and copper end rings of an electric motor cage rotor assembly.
Abstract:The exterior tube structure exerts radial outward forces, and the diagrid columns have significant difference in axial force.Both result in large axial tension forces in ring beams.
[摘要]重力荷载作用下网筒结构外鼓及交叉柱间 力差异将使环梁受到较大
力差异将使环梁受到较大 拉力。
拉力。
In order to achieve the fabrication of noninvolute beveloid gears with crossed axes by using the existing machine tools, the tooth profile errors and axial errors should be studied.
很多 口机械中应用了交错
口机械中应用了交错 非渐开线变厚齿轮传动,目前国内在该领域
非渐开线变厚齿轮传动,目前国内在该领域 研究还是空白。
研究还是空白。
It is put forward in this paper that the residual strength of overconsolidated soil can be determined by normal routine triaxial testing if its axial load can be controlled exactly.
如果能够准确控制 向荷重,对超固结土可在常规三
向荷重,对超固结土可在常规三 仪中测定出残余强度。
仪中测定出残余强度。
By observation and analysis of the test data, changing the plate steel endshield of motor into the disc iron one can improve the rigidness of endshield, and reduce the axial vibration of motor.
通过观察和检测数据分析,电动机 平板式钢板端盖改为盘式铸铁端盖,可提高端盖刚度,降低电机
平板式钢板端盖改为盘式铸铁端盖,可提高端盖刚度,降低电机 向振动。
向振动。
声明:以上例句、词性分类均由互联网资源自动生成,部分未经过人工审核,其表达内容亦不代表本软件 观点;若发现问题,欢迎向我们指正。
观点;若发现问题,欢迎向我们指正。
 的;
的;
 的
的 的;
的; 的;
的; ;
; 的;
的; 的,轮流的;
的,轮流的;
 力
力 流;
流;
 流
流

 载荷;
载荷;
 负荷;
负荷;
 荷载
荷载
 挤压
挤压

 流式通风机;
流式通风机; 流式风
流式风 ;
; 两
两 风机
风机 对称性
对称性
 速度,
速度, 流速度
流速度
 应力;
应力; 应力
应力 流风机;
流风机; 流式风
流式风

 位移
位移
 应变
应变 流式压缩机
流式压缩机
 推力
推力
 长度
长度 线
线
 移
移

 间隙;纵
间隙;纵 间隙;天地间隙
间隙;天地间隙 变形;
变形;
 形变,
形变,
 变化
变化
 载荷;
载荷;
 加载
加载Efficacy measures include axial length, keratometric power and mean absolute refractive error.
有效测量值包括眼 长度,角膜曲率和绝对屈光误差值等内容。
长度,角膜曲率和绝对屈光误差值等内容。
Fracture characteristics of axial tension of RCC layer surface are studied experimentally by servohydraulic closed-loop testing machine in laboratory.
利用电液伺服式试验机对有层面碾压混凝土试件进行 拉断裂试验研究。
拉断裂试验研究。
The finite element models of axial tension member and eccentrical tension members are established with ANSYS finite element program.
4、用通用有限元分析软件ANSYS建立了混凝土 心和偏心受拉的有限元模型,进行分析并得到了受拉构件的应力云图、变形图及开裂图,并与理论分析结果进行了比较。
心和偏心受拉的有限元模型,进行分析并得到了受拉构件的应力云图、变形图及开裂图,并与理论分析结果进行了比较。
Objective: To discuss the axial image characters of spondyloschisis from vertebral articulations is the purpose of this article.
探讨腰椎椎弓峡部裂与椎间小关节在横断图像上的影像学特征。
A two-gap drift tube buncher and a one-gap grid buncher with linear bunching waveform are used on the SFC axial injection line.
SFC
 注入线采用了一个双间隙漂移管式聚束器和一个单间隙栅网型聚束器,分别采用三角波和锯齿波的聚束波形。
注入线采用了一个双间隙漂移管式聚束器和一个单间隙栅网型聚束器,分别采用三角波和锯齿波的聚束波形。
In general,the cylindrical roller bearings, belonging to axial discerptible bearing,are suitable only for sustaining radial loads.The contact of roller with race is linear.
圆柱滚子 承一般只用于承受径
承一般只用于承受径 负荷,滚子与套圈滚道为线性接触,属
负荷,滚子与套圈滚道为线性接触,属
 可分离型
可分离型 承。
承。
Abstract: A two-gap drift tube buncher and a one-gap grid buncher with linear bunching waveform are used on the SFC axial injection line.
SFC
 注入线采用了一个双间隙漂移管式聚束器和一个单间隙栅网型聚束器,分别采用三角波和锯齿波的聚束波形。
注入线采用了一个双间隙漂移管式聚束器和一个单间隙栅网型聚束器,分别采用三角波和锯齿波的聚束波形。
The soft-stiff rings of the experimental box are used to ensure axial softness and radial stiffness; the veridical experiments simulate better the one-dimensional plane strain motion.
由于采用了软硬环试验箱体以保证箱体的
 柔性及径
柔性及径 刚性技术,验证性试验比较好地模拟了介质的一维平面应变运
刚性技术,验证性试验比较好地模拟了介质的一维平面应变运 。
。
With greater axial and radial load rating capacity, good replaceability of components. The shaft can be adjusted through external hexogan then to adjust the axial part dimension.
 承径
承径 和
和
 的承载能力都比较大,各配件可替换性强。
的承载能力都比较大,各配件可替换性强。 承通过调节偏心外六角来调整芯
承通过调节偏心外六角来调整芯 位置进而达到调整侧滚轮
位置进而达到调整侧滚轮
 尺寸的目的。
尺寸的目的。
Rapid application of an axial force completes the upset welds.The localized heating is in high current, low voltage pulses for which a homopolar welding generator is utilized.
Electric resistance welding provides localized heating for simultaneous upset welding of the copper bars and copper end rings of an electric motor cage rotor assembly.
Abstract:The exterior tube structure exerts radial outward forces, and the diagrid columns have significant difference in axial force.Both result in large axial tension forces in ring beams.
[摘要]重力荷载作用下网筒结构外鼓及交叉柱间 力差异将使环梁受到较大的拉力。
力差异将使环梁受到较大的拉力。
In order to achieve the fabrication of noninvolute beveloid gears with crossed axes by using the existing machine tools, the tooth profile errors and axial errors should be studied.
很多进口机械中应用了交错 非渐开线变厚齿轮传
非渐开线变厚齿轮传 ,目前国内在该领域的研究还是空白。
,目前国内在该领域的研究还是空白。
It is put forward in this paper that the residual strength of overconsolidated soil can be determined by normal routine triaxial testing if its axial load can be controlled exactly.
如果能够准确控制
 荷重,对超固结土可在常规三
荷重,对超固结土可在常规三 仪中测定出残余强度。
仪中测定出残余强度。
By observation and analysis of the test data, changing the plate steel endshield of motor into the disc iron one can improve the rigidness of endshield, and reduce the axial vibration of motor.
通过观察和检测数据分析,电 机的平板式钢板端盖改为盘式铸铁端盖,可提高端盖刚度,降低电机
机的平板式钢板端盖改为盘式铸铁端盖,可提高端盖刚度,降低电机
 振
振 。
。
声明:以上例句、词性分类均由互联网资源自 生成,部分未经过人工审核,其表达内容亦不代表本软件的观点;若发现问题,欢迎
生成,部分未经过人工审核,其表达内容亦不代表本软件的观点;若发现问题,欢迎 我们指正。
我们指正。

 ;
; 向
向
 ;
; ;
; ,有环纹
,有环纹 ;
; ;
; ,横向
,横向 ;
; ;
; ,纵向
,纵向 ;
; ,轮流
,轮流 ;
;
 形
形 ;
; 向力
向力 流;
流; 向流动
向流动 向载荷;
向载荷; 向负荷;
向负荷; 向荷载
向荷载 向挤压
向挤压 向
向 流式通风机;
流式通风机; 流式风扇;
流式风扇; 两扇风机
两扇风机 对称性
对称性 向速度,
向速度, 流速度
流速度 向应力;
向应力; 应力
应力 流风机;
流风机; 流式风扇
流式风扇 向位移
向位移 向应变
向应变 流式压缩机
流式压缩机 向推力
向推力 向长度
向长度 线
线 向移动
向移动 向间隙;纵向间隙;天地间隙
向间隙;纵向间隙;天地间隙 变形;
变形; 向形变,
向形变, 向变化
向变化 向载荷;
向载荷; 向加载
向加载Efficacy measures include axial length, keratometric power and mean absolute refractive error.
有效测量值包括眼 长度,角膜曲率和绝对屈光误差值等内容。
长度,角膜曲率和绝对屈光误差值等内容。
Fracture characteristics of axial tension of RCC layer surface are studied experimentally by servohydraulic closed-loop testing machine in laboratory.
利用电液伺服式试验机对有层面碾压混凝土试件

 拉断裂试验研究。
拉断裂试验研究。
The finite element models of axial tension member and eccentrical tension members are established with ANSYS finite element program.
4、用通用有限元分析软件ANSYS建立了混凝土 心和偏心受拉
心和偏心受拉 有限元模型,
有限元模型,
 分析并得到了受拉构件
分析并得到了受拉构件 应力云图、变形图及开裂图,并与理论分析结果
应力云图、变形图及开裂图,并与理论分析结果
 了比较。
了比较。
Objective: To discuss the axial image characters of spondyloschisis from vertebral articulations is the purpose of this article.
探讨腰椎椎弓峡部裂与椎间小关节在横断图像上 影像学特征。
影像学特征。
A two-gap drift tube buncher and a one-gap grid buncher with linear bunching waveform are used on the SFC axial injection line.
SFC 向注入线采用了一个双间隙漂移管式聚束器和一个单间隙栅网型聚束器,分别采用三角波和锯齿波
向注入线采用了一个双间隙漂移管式聚束器和一个单间隙栅网型聚束器,分别采用三角波和锯齿波 聚束波形。
聚束波形。
In general,the cylindrical roller bearings, belonging to axial discerptible bearing,are suitable only for sustaining radial loads.The contact of roller with race is linear.

 滚子
滚子 承一般只用于承受径向负荷,滚子与套圈滚道为线性接触,属
承一般只用于承受径向负荷,滚子与套圈滚道为线性接触,属 向可分离型
向可分离型 承。
承。
Abstract: A two-gap drift tube buncher and a one-gap grid buncher with linear bunching waveform are used on the SFC axial injection line.
SFC 向注入线采用了一个双间隙漂移管式聚束器和一个单间隙栅网型聚束器,分别采用三角波和锯齿波
向注入线采用了一个双间隙漂移管式聚束器和一个单间隙栅网型聚束器,分别采用三角波和锯齿波 聚束波形。
聚束波形。
The soft-stiff rings of the experimental box are used to ensure axial softness and radial stiffness; the veridical experiments simulate better the one-dimensional plane strain motion.
由于采用了软硬环试验箱体以保证箱体
 向柔性及径向刚性技术,验证性试验比较好地模拟了介质
向柔性及径向刚性技术,验证性试验比较好地模拟了介质 一维平面应变运动。
一维平面应变运动。
With greater axial and radial load rating capacity, good replaceability of components. The shaft can be adjusted through external hexogan then to adjust the axial part dimension.
 承径向和
承径向和 向
向 承载能力都比较大,各配件可替换性强。
承载能力都比较大,各配件可替换性强。 承通过调节偏心外六角来调整芯
承通过调节偏心外六角来调整芯 位置
位置 而达到调整侧滚轮
而达到调整侧滚轮 向尺寸
向尺寸 目
目 。
。
Rapid application of an axial force completes the upset welds.The localized heating is in high current, low voltage pulses for which a homopolar welding generator is utilized.
Electric resistance welding provides localized heating for simultaneous upset welding of the copper bars and copper end rings of an electric motor cage rotor assembly.
Abstract:The exterior tube structure exerts radial outward forces, and the diagrid columns have significant difference in axial force.Both result in large axial tension forces in ring beams.
[摘要]重力荷载作用下网筒结构外鼓及交叉 间
间 力差异将使环梁受到较大
力差异将使环梁受到较大 拉力。
拉力。
In order to achieve the fabrication of noninvolute beveloid gears with crossed axes by using the existing machine tools, the tooth profile errors and axial errors should be studied.
很多 口机械中应用了交错
口机械中应用了交错 非渐开线变厚齿轮传动,目前国内在该领域
非渐开线变厚齿轮传动,目前国内在该领域 研究还是空白。
研究还是空白。
It is put forward in this paper that the residual strength of overconsolidated soil can be determined by normal routine triaxial testing if its axial load can be controlled exactly.
如果能够准确控制 向荷重,对超固结土可在常规三
向荷重,对超固结土可在常规三 仪中测定出残余强度。
仪中测定出残余强度。
By observation and analysis of the test data, changing the plate steel endshield of motor into the disc iron one can improve the rigidness of endshield, and reduce the axial vibration of motor.
通过观察和检测数据分析,电动机 平板式钢板端盖改为盘式铸铁端盖,可提高端盖刚度,降低电机
平板式钢板端盖改为盘式铸铁端盖,可提高端盖刚度,降低电机 向振动。
向振动。
声明:以上例句、词性分类均由互联网资源自动生成,部分未经过人工审核,其表达内容亦不代表本软件 观点;若发现问题,欢迎向我们指正。
观点;若发现问题,欢迎向我们指正。