Wisdom teeth are molers molars, or shoeing chewing teeth at the back of the mouth.

智齿是在嘴巴后方的臼齿或者嚼牙。

The CAD model of molar prosthesis is usually stored in standard templete library (STL) format.

磨牙修复体CAD模型通常以STL格式存储。

Occlusal or vertical movement of maxillary and mandibular molars was not correlated to mandibular rotation or horizatal displacement of pogonion.

畸形患者的下颌垂长和颏点垂移位增加。上颌与下颌磨牙的垂或移动与下颌旋转及颏点的水平移位无关。

Molar relation changed from class II to class I relationship;Anterior overjet and overbite are normal;Good occlusal intercuspation is also achieved.

矫治完成后均达到理想的侧貌外形，磨牙关系由II类改正为I类关系，前牙覆覆盖正常，尖窝关系良好。

Using a simple semi-fixed lingual arch combined with the edgewise technology to correct 8 cases with linguoclination or buccoclination of the mandibular molars.

对8例下颌磨牙颊或舌倾斜错位的患者,采用简易半固定舌弓配合方丝弓矫治技术在矫治初期进行矫治。

Results indicate interestingly that the double bond of GMA polymerized with polystyryl carbanion and the molar ratio of epoxy end group and polystyrene oligomer can be adjusted.

在GMA与聚苯乙烯阴离子反应的过程中，GMA在活性种的终端发了聚合，所得产物中环氧端基与聚合产物的摩尔比可根据需要进行调节。

Tooth implants were generated from pig third molar tooth bud cells seeded onto polyglycolide (PGA) and polyglycolide-colactide (PLGA) scaffolds, and grown for 4 weeks in the omenta of adult rat hosts.

将猪的第三磨牙牙胚细胞接种到PGA和PLGA支架材料用于构建牙齿的移植物，并将上述移植物在成年大鼠大网膜内移植4周。

Firstly, p-methylacetophenone was obtained in the presence of alchlor as the catalyst, and the optimum condition was 4:1:2 in molar ratio for toluene, acetic anhydride and alchlor with yield of 86.2%.

首先，以甲苯和乙酸酐为原料，在催化剂三氯化铝存在下合成对甲基苯乙酮，并确定甲苯，乙酸酐和三氯化铝的最佳摩尔比为4: 1: 2，收率为86.2%。

Wisdom teeth are molers molars, or shoeing chewing teeth at the back of the mouth.

智齿是在嘴巴后方的臼齿或者嚼牙。

The CAD model of molar prosthesis is usually stored in standard templete library (STL) format.

磨牙修复体CAD模型通常以STL格。

Occlusal or vertical movement of maxillary and mandibular molars was not correlated to mandibular rotation or horizatal displacement of pogonion.

畸形患者的下颌垂直向生长和颏点垂直向移位增加。上颌与下颌磨牙的垂直向或向移动与下颌旋转及颏点的水平向移位无关。

Molar relation changed from class II to class I relationship;Anterior overjet and overbite are normal;Good occlusal intercuspation is also achieved.

矫治完成后均达到理想的侧貌外形，磨牙关系由II类改正为I类关系，前牙覆覆盖正常，尖窝关系良好。

Using a simple semi-fixed lingual arch combined with the edgewise technology to correct 8 cases with linguoclination or buccoclination of the mandibular molars.

对8例下颌磨牙颊向或舌向倾斜错位的患者,采用简易半固定舌弓配合方丝弓矫治技术在矫治初期进行矫治。

Results indicate interestingly that the double bond of GMA polymerized with polystyryl carbanion and the molar ratio of epoxy end group and polystyrene oligomer can be adjusted.

在GMA与聚苯乙烯阴离子反应的过程中，GMA在活性种的终端发生了聚合，所得产物中环氧端基与聚合产物的摩比可根据需要进行调节。

Tooth implants were generated from pig third molar tooth bud cells seeded onto polyglycolide (PGA) and polyglycolide-colactide (PLGA) scaffolds, and grown for 4 weeks in the omenta of adult rat hosts.

将猪的第三磨牙牙胚细胞接种到PGA和PLGA支架材料用于构建牙齿的移植物，并将上述移植物在成年大鼠大网膜内移植4周。

Firstly, p-methylacetophenone was obtained in the presence of alchlor as the catalyst, and the optimum condition was 4:1:2 in molar ratio for toluene, acetic anhydride and alchlor with yield of 86.2%.

首先，以甲苯和乙酸酐为原料，在催化剂三氯化铝在下合成对甲基苯乙酮，并确定甲苯，乙酸酐和三氯化铝的最佳摩比为4: 1: 2，收率为86.2%。

Wisdom teeth are molers molars, or shoeing chewing teeth at the back of the mouth.

智齿是在嘴巴后方的臼齿或者嚼牙。

The CAD model of molar prosthesis is usually stored in standard templete library (STL) format.

磨牙修复体CAD模型通常以STL格式存储。

Occlusal or vertical movement of maxillary and mandibular molars was not correlated to mandibular rotation or horizatal displacement of pogonion.

畸形患者的下颌垂直生长和颏点垂直移位增加。上颌与下颌磨牙的垂直或移动与下颌旋转及颏点的移位无关。

Molar relation changed from class II to class I relationship;Anterior overjet and overbite are normal;Good occlusal intercuspation is also achieved.

矫治完成后均达到理想的侧貌外形，磨牙关系由II类改正为I类关系，前牙覆覆盖正常，尖窝关系良好。

Using a simple semi-fixed lingual arch combined with the edgewise technology to correct 8 cases with linguoclination or buccoclination of the mandibular molars.

对8例下颌磨牙颊或舌倾斜错位的患者,采用简易半固定舌弓配合方丝弓矫治技术在矫治初期进行矫治。

Results indicate interestingly that the double bond of GMA polymerized with polystyryl carbanion and the molar ratio of epoxy end group and polystyrene oligomer can be adjusted.

在GMA与聚苯乙烯阴离子反应的过程中，GMA在活种的终端发生了聚合，所得产物中环氧端基与聚合产物的摩尔比根据需要进行调节。

Tooth implants were generated from pig third molar tooth bud cells seeded onto polyglycolide (PGA) and polyglycolide-colactide (PLGA) scaffolds, and grown for 4 weeks in the omenta of adult rat hosts.

将猪的第三磨牙牙胚细胞接种到PGA和PLGA支架材料用于构建牙齿的移植物，并将上述移植物在成年大鼠大网膜内移植4周。

Firstly, p-methylacetophenone was obtained in the presence of alchlor as the catalyst, and the optimum condition was 4:1:2 in molar ratio for toluene, acetic anhydride and alchlor with yield of 86.2%.

首先，以甲苯和乙酸酐为原料，在催化剂三氯化铝存在下合成对甲基苯乙酮，并确定甲苯，乙酸酐和三氯化铝的最佳摩尔比为4: 1: 2，收率为86.2%。

Wisdom teeth are molers molars, or shoeing chewing teeth at the back of the mouth.

智齿是在嘴巴后方的臼齿或者嚼牙。

The CAD model of molar prosthesis is usually stored in standard templete library (STL) format.

磨牙修复体CAD模型通常以STL格式存储。

Occlusal or vertical movement of maxillary and mandibular molars was not correlated to mandibular rotation or horizatal displacement of pogonion.

畸形患者的下颌生长和颏点移位增加。上颌与下颌磨牙的或移动与下颌旋转及颏点的水平移位无关。

Molar relation changed from class II to class I relationship;Anterior overjet and overbite are normal;Good occlusal intercuspation is also achieved.

矫治完成后均达到理想的侧貌外形，磨牙关系由II类改正为I类关系，前牙覆覆盖正常，尖窝关系良好。

Using a simple semi-fixed lingual arch combined with the edgewise technology to correct 8 cases with linguoclination or buccoclination of the mandibular molars.

对8例下颌磨牙颊或舌倾斜错位的患者,采用简易半固定舌弓配合方丝弓矫治技术在矫治初期进行矫治。

Results indicate interestingly that the double bond of GMA polymerized with polystyryl carbanion and the molar ratio of epoxy end group and polystyrene oligomer can be adjusted.

在GMA与聚苯乙烯阴离反应的过程中，GMA在活性种的终端发生了聚合，所得产物中环氧端基与聚合产物的摩尔比可根据需要进行调节。

Tooth implants were generated from pig third molar tooth bud cells seeded onto polyglycolide (PGA) and polyglycolide-colactide (PLGA) scaffolds, and grown for 4 weeks in the omenta of adult rat hosts.

将猪的第三磨牙牙胚细胞接种到PGA和PLGA支架材料用于构建牙齿的移植物，并将上述移植物在成年大鼠大网膜内移植4周。

Firstly, p-methylacetophenone was obtained in the presence of alchlor as the catalyst, and the optimum condition was 4:1:2 in molar ratio for toluene, acetic anhydride and alchlor with yield of 86.2%.

首先，以甲苯和乙酸酐为原料，在催化剂三氯化铝存在下合成对甲基苯乙酮，并确定甲苯，乙酸酐和三氯化铝的最佳摩尔比为4: 1: 2，收率为86.2%。

Wisdom teeth are molers molars, or shoeing chewing teeth at the back of the mouth.

智齿是在嘴巴后方的臼齿或者嚼牙。

The CAD model of molar prosthesis is usually stored in standard templete library (STL) format.

磨牙修复体CAD模型通常以STL格式存储。

Occlusal or vertical movement of maxillary and mandibular molars was not correlated to mandibular rotation or horizatal displacement of pogonion.

畸形患者的下颌垂直生长和颏点垂直移位增加。上颌与下颌磨牙的垂直或移动与下颌旋转及颏点的移位无关。

Molar relation changed from class II to class I relationship;Anterior overjet and overbite are normal;Good occlusal intercuspation is also achieved.

矫治完成后均达到理想的侧貌外形，磨牙关系由II类改正为I类关系，前牙覆覆盖正常，尖窝关系良好。

Using a simple semi-fixed lingual arch combined with the edgewise technology to correct 8 cases with linguoclination or buccoclination of the mandibular molars.

对8例下颌磨牙颊或舌倾斜错位的患者,采用简易半固定舌弓配合方丝弓矫治技术在矫治初期进行矫治。

Results indicate interestingly that the double bond of GMA polymerized with polystyryl carbanion and the molar ratio of epoxy end group and polystyrene oligomer can be adjusted.

在GMA与聚苯乙烯阴离子反应的过程中，GMA在活种的终端发生了聚合，所得产物中环氧端基与聚合产物的摩尔比根据需要进行调节。

Tooth implants were generated from pig third molar tooth bud cells seeded onto polyglycolide (PGA) and polyglycolide-colactide (PLGA) scaffolds, and grown for 4 weeks in the omenta of adult rat hosts.

将猪的第三磨牙牙胚细胞接种到PGA和PLGA支架材料用于构建牙齿的移植物，并将上述移植物在成年大鼠大网膜内移植4周。

Firstly, p-methylacetophenone was obtained in the presence of alchlor as the catalyst, and the optimum condition was 4:1:2 in molar ratio for toluene, acetic anhydride and alchlor with yield of 86.2%.

首先，以甲苯和乙酸酐为原料，在催化剂三氯化铝存在下合成对甲基苯乙酮，并确定甲苯，乙酸酐和三氯化铝的最佳摩尔比为4: 1: 2，收率为86.2%。

Wisdom teeth are molers molars, or shoeing chewing teeth at the back of the mouth.

智齿是在嘴巴后方的臼齿或者嚼牙。

The CAD model of molar prosthesis is usually stored in standard templete library (STL) format.

磨牙修复体CAD模型通常以STL格式存储。

Occlusal or vertical movement of maxillary and mandibular molars was not correlated to mandibular rotation or horizatal displacement of pogonion.

畸形患者的下向生长和颏点向移位增加。上与下磨牙的向或向移动与下旋转及颏点的水平向移位无关。

Molar relation changed from class II to class I relationship;Anterior overjet and overbite are normal;Good occlusal intercuspation is also achieved.

矫治完成后均达到理想的侧貌外形，磨牙关系由II类改正为I类关系，前牙覆覆盖正常，尖窝关系良好。

Using a simple semi-fixed lingual arch combined with the edgewise technology to correct 8 cases with linguoclination or buccoclination of the mandibular molars.

对8例下磨牙颊向或舌向倾斜错位的患者,采用简易半固定舌弓配合方丝弓矫治技术在矫治初期进行矫治。

Results indicate interestingly that the double bond of GMA polymerized with polystyryl carbanion and the molar ratio of epoxy end group and polystyrene oligomer can be adjusted.

在GMA与聚苯乙烯阴离反应的过程中，GMA在活性种的终端发生了聚合，所得产物中环氧端基与聚合产物的摩尔可根据需要进行调节。

Tooth implants were generated from pig third molar tooth bud cells seeded onto polyglycolide (PGA) and polyglycolide-colactide (PLGA) scaffolds, and grown for 4 weeks in the omenta of adult rat hosts.

将猪的第三磨牙牙胚细胞接种到PGA和PLGA支架材料用于构建牙齿的移植物，并将上述移植物在成年大鼠大网膜内移植4周。

Firstly, p-methylacetophenone was obtained in the presence of alchlor as the catalyst, and the optimum condition was 4:1:2 in molar ratio for toluene, acetic anhydride and alchlor with yield of 86.2%.

首先，以甲苯和乙酸酐为原料，在催化剂三氯化铝存在下合成对甲基苯乙酮，并确定甲苯，乙酸酐和三氯化铝的最佳摩尔为4: 1: 2，收率为86.2%。

Wisdom teeth are molers molars, or shoeing chewing teeth at the back of the mouth.

智齿是在嘴巴后方的臼齿或嚼牙。

The CAD model of molar prosthesis is usually stored in standard templete library (STL) format.

磨牙修复体CAD模型通常以STL格式存储。

Occlusal or vertical movement of maxillary and mandibular molars was not correlated to mandibular rotation or horizatal displacement of pogonion.

畸的下颌垂直向生长和颏点垂直向移位增加。上颌与下颌磨牙的垂直向或向移动与下颌旋转及颏点的水平向移位无关。

Molar relation changed from class II to class I relationship;Anterior overjet and overbite are normal;Good occlusal intercuspation is also achieved.

矫治完成后均达到理想的侧貌外，磨牙关系由II类改正为I类关系，前牙覆覆盖正常，尖窝关系良好。

Using a simple semi-fixed lingual arch combined with the edgewise technology to correct 8 cases with linguoclination or buccoclination of the mandibular molars.

对8例下颌磨牙颊向或舌向倾斜错位的,采用简易半固定舌弓配合方丝弓矫治技术在矫治初期进行矫治。

Results indicate interestingly that the double bond of GMA polymerized with polystyryl carbanion and the molar ratio of epoxy end group and polystyrene oligomer can be adjusted.

在GMA与聚苯乙烯阴离反应的过程中，GMA在活性种的终端发生了聚合，所得产物中环氧端基与聚合产物的摩尔可根据需要进行调节。

Tooth implants were generated from pig third molar tooth bud cells seeded onto polyglycolide (PGA) and polyglycolide-colactide (PLGA) scaffolds, and grown for 4 weeks in the omenta of adult rat hosts.

将猪的第三磨牙牙胚细胞接种到PGA和PLGA支架材料用于构建牙齿的移植物，并将上述移植物在成年大鼠大网膜内移植4周。

Firstly, p-methylacetophenone was obtained in the presence of alchlor as the catalyst, and the optimum condition was 4:1:2 in molar ratio for toluene, acetic anhydride and alchlor with yield of 86.2%.

首先，以甲苯和乙酸酐为原料，在催化剂三氯化铝存在下合成对甲基苯乙酮，并确定甲苯，乙酸酐和三氯化铝的最佳摩尔为4: 1: 2，收为86.2%。

Wisdom teeth are molers molars, or shoeing chewing teeth at the back of the mouth.

智齿是在嘴巴后方的臼齿或者嚼牙。

The CAD model of molar prosthesis is usually stored in standard templete library (STL) format.

磨牙修复体CAD模型通常以STL格式存储。

Occlusal or vertical movement of maxillary and mandibular molars was not correlated to mandibular rotation or horizatal displacement of pogonion.

畸形患者的下颌生长和颏点移位增加。上颌与下颌磨牙的或移动与下颌旋转及颏点的水平移位无关。

Molar relation changed from class II to class I relationship;Anterior overjet and overbite are normal;Good occlusal intercuspation is also achieved.

矫治完成后均达到理想的侧貌外形，磨牙关系由II类改正为I类关系，前牙覆覆盖正常，尖窝关系良好。

Using a simple semi-fixed lingual arch combined with the edgewise technology to correct 8 cases with linguoclination or buccoclination of the mandibular molars.

对8例下颌磨牙颊或舌倾斜错位的患者,采用简易半固定舌弓配合方丝弓矫治技术在矫治初期进行矫治。

Results indicate interestingly that the double bond of GMA polymerized with polystyryl carbanion and the molar ratio of epoxy end group and polystyrene oligomer can be adjusted.

在GMA与聚苯乙烯阴离反应的过程中，GMA在活性种的终端发生了聚合，所得产物中环氧端基与聚合产物的摩尔比可根据需要进行调节。

Tooth implants were generated from pig third molar tooth bud cells seeded onto polyglycolide (PGA) and polyglycolide-colactide (PLGA) scaffolds, and grown for 4 weeks in the omenta of adult rat hosts.

将猪的第三磨牙牙胚细胞接种到PGA和PLGA支架材料用于构建牙齿的移植物，并将上述移植物在成年大鼠大网膜内移植4周。

Firstly, p-methylacetophenone was obtained in the presence of alchlor as the catalyst, and the optimum condition was 4:1:2 in molar ratio for toluene, acetic anhydride and alchlor with yield of 86.2%.

首先，以甲苯和乙酸酐为原料，在催化剂三氯化铝存在下合成对甲基苯乙酮，并确定甲苯，乙酸酐和三氯化铝的最佳摩尔比为4: 1: 2，收率为86.2%。

Wisdom teeth are molers molars, or shoeing chewing teeth at the back of the mouth.

智齿是在嘴巴后方的臼齿或者嚼牙。

The CAD model of molar prosthesis is usually stored in standard templete library (STL) format.

牙修复体CAD模型通常以STL格式存储。

Occlusal or vertical movement of maxillary and mandibular molars was not correlated to mandibular rotation or horizatal displacement of pogonion.

畸形患者的垂直向生长和颏点垂直向移位增加。上与牙的垂直向或向移动与旋转及颏点的水平向移位无关。

Molar relation changed from class II to class I relationship;Anterior overjet and overbite are normal;Good occlusal intercuspation is also achieved.

矫治完成后均达到理想的侧貌外形，牙关系由II类改正为I类关系，前牙覆覆盖正常，尖窝关系良好。

Using a simple semi-fixed lingual arch combined with the edgewise technology to correct 8 cases with linguoclination or buccoclination of the mandibular molars.

对8例牙颊向或舌向倾斜错位的患者,采用简易半固定舌弓配合方丝弓矫治技术在矫治初期进行矫治。

Results indicate interestingly that the double bond of GMA polymerized with polystyryl carbanion and the molar ratio of epoxy end group and polystyrene oligomer can be adjusted.

在GMA与聚苯乙烯阴离子反应的过程中，GMA在活性种的终端发生了聚合，所得产物中环氧端基与聚合产物的摩尔比可根据需要进行调节。

Tooth implants were generated from pig third molar tooth bud cells seeded onto polyglycolide (PGA) and polyglycolide-colactide (PLGA) scaffolds, and grown for 4 weeks in the omenta of adult rat hosts.

将猪的第三牙牙胚细胞接种到PGA和PLGA支架材料用于构建牙齿的移植物，并将上述移植物在成年大鼠大网膜内移植4周。

Firstly, p-methylacetophenone was obtained in the presence of alchlor as the catalyst, and the optimum condition was 4:1:2 in molar ratio for toluene, acetic anhydride and alchlor with yield of 86.2%.

首先，以甲苯和乙酸酐为原料，在催化剂三氯化铝存在合成对甲基苯乙酮，并确定甲苯，乙酸酐和三氯化铝的最佳摩尔比为4: 1: 2，收率为86.2%。