The flame in the furnace can be looked at through colored glasses.

可以通过有色眼镜观看高内的火焰。

The furnace broke down and the entire office building has no heat.

锅坏了, 整栋办公大楼没有暖气。

The metal glowed in the furnace.

金属在熔里发出灼热的光。

The Chatacteristics of Contop Smelting Process for cyclone furnace is discussed and make a comparison with silver furnace.

述了旋涡顶吹炼工艺技术特点,并与工艺指标进行对比。

The casting of such a big copperware needed the metals above 1000 kilograms, also must have the big furnace.

铸造这样高大的器，所需金属料当在1000千克以上，且必须有较大的熔。

Problems of lead-zinc-aluminium scalings in washing water system for blast furnaces gas are analyzed. The solving methods are given.

针对酒钢高煤气洗涤水系统结铅锌铝垢问题，进行了分析探讨，并提出了解决该问题的办法。

On this basis of the research, the fragmentized mechanism of coke in a blast furnace is analyzed.

在此基础上，从理论上分析了高用焦炭的破碎机理。

A continuous reheating industrial furnace is large inertia,pure delay,multi-variables,time-vary-ing,intercoupling complicated controlled plant,and has many uncertain factors.

连续式加热是个典型具有大惯性、纯滞后、多变量、时变并且相互耦合的复杂被控对象,而且有许多不确定因素。

The medium and small - sized furnace stack gunning with unshaped refractory materials is a new repatching technology.

中小型高身内衬喷补是采用不定型耐火材料以喷射法修复身的一项新技术。

The practice showed that the blast furnace slags mainly consisted of melilite,cuspidine,bivalent metallic sulphide and Ce-Ca silica.

黄长石、枪晶石、二价金属硫化物、铈钙硅石是构成高渣的主要矿物。

There was a low protecting wall to knock down the heat blasting from the pit of the furnace.

有一堵低矮的护壁挡住从膛里喷出的火焰。

The relation of internal microstructure damage degree of furnace tube in a ethylene pyrolyzer with weldability was studied.

研究了乙烯裂解服役管材料内部的组织损伤程度与焊接性的关系。

The paper expounds and contrasts improved MC FeMn presmelting process adding ore in rocking furnace with original process .

论述了生产中碳锰铁的原摇预炼工艺和改进后的摇加矿预炼工艺的特点,并进行了对比。

The ethanol was dropped into furnace meanwhile ammonia was put through to nitempering. and the process parameter was optimized.

在通氨的同时,将乙醇直接滴入工作内,实现气体软氮化,并对工艺进行了优选。

Application: It is the most ideal filler material of reburner , reacting furnace, filler furnace on oil and chemical industries.

是广大石油、化工行业中转化、反应、填料塔中最为理想的填料。

On the other hand, improving the serving environments，such as optimizing the furnace’s structure, regulating manhandle, etc. increase of service life.

另一方面，改善使用环境，如通过型改进优化，规范人为操作等措施，以提高其使用寿命。

Single chamber high pressure gas quenching vacuum furnace,double chamber and multichamber vacuum furnaces implementing the acetylene low pressure carburizing were briefly introduced.

简要介绍了实施乙炔低压渗碳的单室高压气淬真空,双室及多室真空。

The percentage of standard taphole arose from 83% to 100% after the taphole clay was used to tapholes of blast furnace.

高使用这种高性能有水炮泥后,铁口合格率由以前的83％提高到100％。

We also have equipment and multi-purpose electronic resistivity automatic cryoscope and so on muffle furnace, electricity heat drum wind drying oven.

马弗、电热鼓风干燥箱等设备多功能电阻率自动测定仪。

In this study, gallium nitride nanowires were successfully grown on Silicon substrate using a simple resistive heated furnace, APCVD system, at room temperature.

发现在氮化镓材料上具有室温铁磁性的性质，被预期能运用在磁性记忆体的元件和积体电路的材料上。

The flame in the furnace can be looked at through colored glasses.

可以通过有色眼镜观看的火焰。

The furnace broke down and the entire office building has no heat.

锅坏了, 整栋办公大楼没有暖气。

The metal glowed in the furnace.

金属在熔里发出灼热的光。

The Chatacteristics of Contop Smelting Process for cyclone furnace is discussed and make a comparison with silver furnace.

着重阐述了旋涡顶吹炼工艺技术特点,并与白银工艺指标进行对比。

The casting of such a big copperware needed the metals above 1000 kilograms, also must have the big furnace.

铸造这样大的器，所需金属料当在1000千克以上，且有较大的熔。

Problems of lead-zinc-aluminium scalings in washing water system for blast furnaces gas are analyzed. The solving methods are given.

针对酒钢煤气洗涤水系统结铅锌铝垢问题，进行了分析探讨，并提出了解决该问题的办法。

On this basis of the research, the fragmentized mechanism of coke in a blast furnace is analyzed.

在此基础上，从理论上分析了用焦炭的破碎机理。

A continuous reheating industrial furnace is large inertia,pure delay,multi-variables,time-vary-ing,intercoupling complicated controlled plant,and has many uncertain factors.

连续式加热是个典型具有大惯性、纯滞后、多变量、时变并且相互耦合的复杂被控对象,而且有许多不确定因素。

The medium and small - sized furnace stack gunning with unshaped refractory materials is a new repatching technology.

中小型身衬喷补是采用不定型耐火材料以喷射法修复身的一项新技术。

The practice showed that the blast furnace slags mainly consisted of melilite,cuspidine,bivalent metallic sulphide and Ce-Ca silica.

黄长石、枪晶石、二价金属硫化物、铈钙硅石是构成渣的主要矿物。

There was a low protecting wall to knock down the heat blasting from the pit of the furnace.

有一堵低矮的护壁挡住从膛里喷出的火焰。

The relation of internal microstructure damage degree of furnace tube in a ethylene pyrolyzer with weldability was studied.

研究了乙烯裂解服役管材料部的组织损伤程度与焊接性的关系。

The paper expounds and contrasts improved MC FeMn presmelting process adding ore in rocking furnace with original process .

论述了生产中碳锰铁的原摇预炼工艺和改进后的摇加矿预炼工艺的特点,并进行了对比。

The ethanol was dropped into furnace meanwhile ammonia was put through to nitempering. and the process parameter was optimized.

在通氨的同时,将乙醇直接滴入工作,实现气体软氮化,并对工艺进行了优选。

Application: It is the most ideal filler material of reburner , reacting furnace, filler furnace on oil and chemical industries.

是广大石油、化工行业中转化、反应、填料塔中最为理想的填料。

On the other hand, improving the serving environments，such as optimizing the furnace’s structure, regulating manhandle, etc. increase of service life.

另一方面，改善使用环境，如通过型改进优化，规范人为操作等措施，以提其使用寿命。

Single chamber high pressure gas quenching vacuum furnace,double chamber and multichamber vacuum furnaces implementing the acetylene low pressure carburizing were briefly introduced.

简要介绍了实施乙炔低压渗碳的单室压气淬真空,双室及多室真空。

The percentage of standard taphole arose from 83% to 100% after the taphole clay was used to tapholes of blast furnace.

使用这种性能有水炮泥后,铁口合格率由以前的83％提到100％。

We also have equipment and multi-purpose electronic resistivity automatic cryoscope and so on muffle furnace, electricity heat drum wind drying oven.

马弗、电热鼓风干燥箱等设备多功能电阻率自动测定仪。

In this study, gallium nitride nanowires were successfully grown on Silicon substrate using a simple resistive heated furnace, APCVD system, at room temperature.

发现在氮化镓材料上具有室温铁磁性的性质，被预期能运用在磁性记忆体的元件和积体电路的材料上。

The flame in the furnace can be looked at through colored glasses.

可以通过有色眼镜观看高炉内火焰。

The furnace broke down and the entire office building has no heat.

锅炉坏了, 整栋办公大楼没有暖气。

The metal glowed in the furnace.

金属在熔炉里发出灼热。

The Chatacteristics of Contop Smelting Process for cyclone furnace is discussed and make a comparison with silver furnace.

着重阐述了旋涡炉顶吹炼工艺技术特点,并与白银炉工艺指标进行对比。

The casting of such a big copperware needed the metals above 1000 kilograms, also must have the big furnace.

铸造这样高大器，所需金属料当在1000千克以上，且必须有较大熔炉。

Problems of lead-zinc-aluminium scalings in washing water system for blast furnaces gas are analyzed. The solving methods are given.

针对酒钢高炉煤气洗涤水系统结铅锌铝垢，进行了分析探讨，并提出了解决该办法。

On this basis of the research, the fragmentized mechanism of coke in a blast furnace is analyzed.

在此基础上，从理论上分析了高炉用焦炭破碎机理。

A continuous reheating industrial furnace is large inertia,pure delay,multi-variables,time-vary-ing,intercoupling complicated controlled plant,and has many uncertain factors.

连续加热炉是个典型具有大惯性、纯滞后、多变量、时变并且相互耦合复杂被控对象,而且有许多不确定因素。

The medium and small - sized furnace stack gunning with unshaped refractory materials is a new repatching technology.

中小型高炉炉身内衬喷补是采用不定型耐火材料以喷射法修复炉身一项新技术。

The practice showed that the blast furnace slags mainly consisted of melilite,cuspidine,bivalent metallic sulphide and Ce-Ca silica.

黄长石、枪晶石、二价金属硫化物、铈钙硅石是构成高炉渣主要矿物。

There was a low protecting wall to knock down the heat blasting from the pit of the furnace.

有一堵低矮护壁挡住从炉膛里喷出火焰。

The relation of internal microstructure damage degree of furnace tube in a ethylene pyrolyzer with weldability was studied.

研究了乙烯裂解炉服役炉管材料内部组织损伤程度与焊接性关系。

The paper expounds and contrasts improved MC FeMn presmelting process adding ore in rocking furnace with original process .

论述了生产中碳锰铁原摇炉预炼工艺和改进后摇炉加矿预炼工艺特点,并进行了对比。

The ethanol was dropped into furnace meanwhile ammonia was put through to nitempering. and the process parameter was optimized.

在通氨同时,将乙醇直接滴入工作炉内,实现气体软氮化,并对工艺进行了优选。

Application: It is the most ideal filler material of reburner , reacting furnace, filler furnace on oil and chemical industries.

是广大石油、化工行业中转化炉、反应炉、填料塔中最为理想填料。

On the other hand, improving the serving environments，such as optimizing the furnace’s structure, regulating manhandle, etc. increase of service life.

另一方面，改善使用环境，如通过炉型改进优化，规范人为操作等措施，以提高其使用寿命。

Single chamber high pressure gas quenching vacuum furnace,double chamber and multichamber vacuum furnaces implementing the acetylene low pressure carburizing were briefly introduced.

简要介绍了实施乙炔低压渗碳单室高压气淬真空炉,双室及多室真空炉。

The percentage of standard taphole arose from 83% to 100% after the taphole clay was used to tapholes of blast furnace.

高炉使用这种高性能有水炮泥后,铁口合格率由以前83％提高到100％。

We also have equipment and multi-purpose electronic resistivity automatic cryoscope and so on muffle furnace, electricity heat drum wind drying oven.

马弗炉、电热鼓风干燥箱等设备多功能电阻率自动测定仪。

In this study, gallium nitride nanowires were successfully grown on Silicon substrate using a simple resistive heated furnace, APCVD system, at room temperature.

发现在氮化镓材料上具有室温铁磁性性质，被预期能运用在磁性记忆体元件和积体电路材料上。

The flame in the furnace can be looked at through colored glasses.

通过有色眼镜观看内的火焰。

The furnace broke down and the entire office building has no heat.

锅坏了, 整栋办公大楼没有暖气。

The metal glowed in the furnace.

金属在熔里发出灼热的光。

The Chatacteristics of Contop Smelting Process for cyclone furnace is discussed and make a comparison with silver furnace.

着重阐述了旋涡顶吹炼工艺技术特点,并与白银工艺指标进行对比。

The casting of such a big copperware needed the metals above 1000 kilograms, also must have the big furnace.

铸造这样大的器，所需金属料当在1000千克上，且必须有较大的熔。

Problems of lead-zinc-aluminium scalings in washing water system for blast furnaces gas are analyzed. The solving methods are given.

针对酒煤气洗涤水系统结铅锌铝垢问题，进行了分析探讨，并提出了解决该问题的办法。

On this basis of the research, the fragmentized mechanism of coke in a blast furnace is analyzed.

在此基础上，从理论上分析了用焦炭的破碎机理。

A continuous reheating industrial furnace is large inertia,pure delay,multi-variables,time-vary-ing,intercoupling complicated controlled plant,and has many uncertain factors.

连续式加热是个典型具有大惯性、纯滞后、多变量、时变并且相互耦合的复杂被控对象,而且有许多不确定因素。

The medium and small - sized furnace stack gunning with unshaped refractory materials is a new repatching technology.

中小型身内衬喷补是采用不定型耐火材料喷射法修复身的一项新技术。

The practice showed that the blast furnace slags mainly consisted of melilite,cuspidine,bivalent metallic sulphide and Ce-Ca silica.

黄长石、枪晶石、二价金属硫化物、铈钙硅石是构成渣的主要矿物。

There was a low protecting wall to knock down the heat blasting from the pit of the furnace.

有一堵低矮的护壁挡住从膛里喷出的火焰。

The relation of internal microstructure damage degree of furnace tube in a ethylene pyrolyzer with weldability was studied.

研究了乙烯裂解服役管材料内部的组织损伤程度与焊接性的关系。

The paper expounds and contrasts improved MC FeMn presmelting process adding ore in rocking furnace with original process .

论述了生产中碳锰铁的原摇预炼工艺和改进后的摇加矿预炼工艺的特点,并进行了对比。

The ethanol was dropped into furnace meanwhile ammonia was put through to nitempering. and the process parameter was optimized.

在通氨的同时,将乙醇直接滴入工作内,实现气体软氮化,并对工艺进行了优选。

Application: It is the most ideal filler material of reburner , reacting furnace, filler furnace on oil and chemical industries.

是广大石油、化工行业中转化、反应、填料塔中最为理想的填料。

On the other hand, improving the serving environments，such as optimizing the furnace’s structure, regulating manhandle, etc. increase of service life.

另一方面，改善使用环境，如通过型改进优化，规范人为操作等措施，提其使用寿命。

Single chamber high pressure gas quenching vacuum furnace,double chamber and multichamber vacuum furnaces implementing the acetylene low pressure carburizing were briefly introduced.

简要介绍了实施乙炔低压渗碳的单室压气淬真空,双室及多室真空。

The percentage of standard taphole arose from 83% to 100% after the taphole clay was used to tapholes of blast furnace.

使用这种性能有水炮泥后,铁口合格率由前的83％提到100％。

We also have equipment and multi-purpose electronic resistivity automatic cryoscope and so on muffle furnace, electricity heat drum wind drying oven.

马弗、电热鼓风干燥箱等设备多功能电阻率自动测定仪。

In this study, gallium nitride nanowires were successfully grown on Silicon substrate using a simple resistive heated furnace, APCVD system, at room temperature.

发现在氮化镓材料上具有室温铁磁性的性质，被预期能运用在磁性记忆体的元件和积体电路的材料上。

The flame in the furnace can be looked at through colored glasses.

可以通过有色眼镜观看高内的火焰。

The furnace broke down and the entire office building has no heat.

锅坏了, 整栋办公大楼没有暖气。

The metal glowed in the furnace.

金属在熔里发出灼热的光。

The Chatacteristics of Contop Smelting Process for cyclone furnace is discussed and make a comparison with silver furnace.

着重阐述了旋涡顶吹炼工艺技术特点,并与白银工艺指标进行对比。

The casting of such a big copperware needed the metals above 1000 kilograms, also must have the big furnace.

铸造这样高大的器，所需金属料当在1000千克以上，且必须有较大的熔。

Problems of lead-zinc-aluminium scalings in washing water system for blast furnaces gas are analyzed. The solving methods are given.

针对酒钢高煤气洗涤水系统结铅锌铝垢问题，进行了分析探讨，并提出了解决该问题的办法。

On this basis of the research, the fragmentized mechanism of coke in a blast furnace is analyzed.

在此基础上，从理论上分析了高用焦炭的破碎机理。

A continuous reheating industrial furnace is large inertia,pure delay,multi-variables,time-vary-ing,intercoupling complicated controlled plant,and has many uncertain factors.

连续式加热是个典型具有大惯性、纯滞后、多变量、时变并且相互耦合的复对象,而且有许多不确定因素。

The medium and small - sized furnace stack gunning with unshaped refractory materials is a new repatching technology.

中小型高身内衬喷补是采用不定型耐火材料以喷射法修复身的一项新技术。

The practice showed that the blast furnace slags mainly consisted of melilite,cuspidine,bivalent metallic sulphide and Ce-Ca silica.

黄长石、枪晶石、二价金属硫化物、铈钙硅石是构成高渣的主要矿物。

There was a low protecting wall to knock down the heat blasting from the pit of the furnace.

有一堵低矮的护壁挡住从膛里喷出的火焰。

The relation of internal microstructure damage degree of furnace tube in a ethylene pyrolyzer with weldability was studied.

研究了乙烯裂解服役管材料内部的组织损伤程度与焊接性的关系。

The paper expounds and contrasts improved MC FeMn presmelting process adding ore in rocking furnace with original process .

论述了生产中碳锰铁的原摇预炼工艺和改进后的摇加矿预炼工艺的特点,并进行了对比。

The ethanol was dropped into furnace meanwhile ammonia was put through to nitempering. and the process parameter was optimized.

在通氨的同时,将乙醇直接滴入工作内,实现气体软氮化,并对工艺进行了优选。

Application: It is the most ideal filler material of reburner , reacting furnace, filler furnace on oil and chemical industries.

是广大石油、化工行业中转化、反应、填料塔中最为理想的填料。

On the other hand, improving the serving environments，such as optimizing the furnace’s structure, regulating manhandle, etc. increase of service life.

另一方面，改善使用环境，如通过型改进优化，规范人为操作等措施，以提高其使用寿命。

Single chamber high pressure gas quenching vacuum furnace,double chamber and multichamber vacuum furnaces implementing the acetylene low pressure carburizing were briefly introduced.

简要介绍了实施乙炔低压渗碳的单室高压气淬真空,双室及多室真空。

The percentage of standard taphole arose from 83% to 100% after the taphole clay was used to tapholes of blast furnace.

高使用这种高性能有水炮泥后,铁口合格率由以前的83％提高到100％。

We also have equipment and multi-purpose electronic resistivity automatic cryoscope and so on muffle furnace, electricity heat drum wind drying oven.

马弗、热鼓风干燥箱等设备多功能阻率自动测定仪。

In this study, gallium nitride nanowires were successfully grown on Silicon substrate using a simple resistive heated furnace, APCVD system, at room temperature.

发现在氮化镓材料上具有室温铁磁性的性质，预期能运用在磁性记忆体的元件和积体路的材料上。

The flame in the furnace can be looked at through colored glasses.

可以通过有色眼镜观看高炉内火焰。

The furnace broke down and the entire office building has no heat.

锅炉坏了, 整栋公大楼没有暖气。

The metal glowed in the furnace.

金属在熔炉里发出灼热光。

The Chatacteristics of Contop Smelting Process for cyclone furnace is discussed and make a comparison with silver furnace.

着重阐述了旋涡炉顶吹炼工艺技术特点,并与白银炉工艺指标进行对比。

The casting of such a big copperware needed the metals above 1000 kilograms, also must have the big furnace.

铸造这样高大器，所需金属料当在1000千克以上，且必须有较大熔炉。

Problems of lead-zinc-aluminium scalings in washing water system for blast furnaces gas are analyzed. The solving methods are given.

针对酒钢高炉煤气洗涤水系统结铅锌铝垢问题，进行了分析探讨，并提出了解决该问题法。

On this basis of the research, the fragmentized mechanism of coke in a blast furnace is analyzed.

在此基础上，从理论上分析了高炉用焦炭破碎机理。

A continuous reheating industrial furnace is large inertia,pure delay,multi-variables,time-vary-ing,intercoupling complicated controlled plant,and has many uncertain factors.

连续式加热炉是个典型具有大惯性、纯滞后、多变量、时变并且相互耦合复杂被控对象,而且有许多不确定因素。

The medium and small - sized furnace stack gunning with unshaped refractory materials is a new repatching technology.

中小型高炉炉身内衬喷补是采用不定型耐火材料以喷射法修复炉身一项新技术。

The practice showed that the blast furnace slags mainly consisted of melilite,cuspidine,bivalent metallic sulphide and Ce-Ca silica.

黄长石、枪晶石、二价金属硫化物、铈钙硅石是构成高炉渣主要矿物。

There was a low protecting wall to knock down the heat blasting from the pit of the furnace.

有一堵低矮护壁挡住从炉膛里喷出火焰。

The relation of internal microstructure damage degree of furnace tube in a ethylene pyrolyzer with weldability was studied.

研究了乙烯裂解炉服役炉管材料内部组织损伤程度与焊性关系。

The paper expounds and contrasts improved MC FeMn presmelting process adding ore in rocking furnace with original process .

论述了生产中碳锰铁原摇炉预炼工艺和改进后摇炉加矿预炼工艺特点,并进行了对比。

The ethanol was dropped into furnace meanwhile ammonia was put through to nitempering. and the process parameter was optimized.

在通氨同时,将乙醇滴入工作炉内,实现气体软氮化,并对工艺进行了优选。

Application: It is the most ideal filler material of reburner , reacting furnace, filler furnace on oil and chemical industries.

是广大石油、化工行业中转化炉、反应炉、填料塔中最为理想填料。

On the other hand, improving the serving environments，such as optimizing the furnace’s structure, regulating manhandle, etc. increase of service life.

另一方面，改善使用环境，如通过炉型改进优化，规范人为操作等措施，以提高其使用寿命。

Single chamber high pressure gas quenching vacuum furnace,double chamber and multichamber vacuum furnaces implementing the acetylene low pressure carburizing were briefly introduced.

简要介绍了实施乙炔低压渗碳单室高压气淬真空炉,双室及多室真空炉。

The percentage of standard taphole arose from 83% to 100% after the taphole clay was used to tapholes of blast furnace.

高炉使用这种高性能有水炮泥后,铁口合格率由以前83％提高到100％。

We also have equipment and multi-purpose electronic resistivity automatic cryoscope and so on muffle furnace, electricity heat drum wind drying oven.

马弗炉、电热鼓风干燥箱等设备多功能电阻率自动测定仪。

In this study, gallium nitride nanowires were successfully grown on Silicon substrate using a simple resistive heated furnace, APCVD system, at room temperature.

发现在氮化镓材料上具有室温铁磁性性质，被预期能运用在磁性记忆体元件和积体电路材料上。

The flame in the furnace can be looked at through colored glasses.

可以通过有色眼镜观看高内的火焰。

The furnace broke down and the entire office building has no heat.

锅坏了, 整栋办公大楼没有暖气。

The metal glowed in the furnace.

金属在熔里发出灼热的光。

The Chatacteristics of Contop Smelting Process for cyclone furnace is discussed and make a comparison with silver furnace.

着重阐述了旋涡顶吹炼工艺技术特点,并与白银工艺指标进行对比。

The casting of such a big copperware needed the metals above 1000 kilograms, also must have the big furnace.

铸造这样高大的器，所需金属料当在1000千克以上，且必须有较大的熔。

Problems of lead-zinc-aluminium scalings in washing water system for blast furnaces gas are analyzed. The solving methods are given.

针对酒钢高煤气洗涤水系统结铅锌铝垢问题，进行了分析探讨，并提出了解决该问题的办法。

On this basis of the research, the fragmentized mechanism of coke in a blast furnace is analyzed.

在此基础上，从理论上分析了高用焦炭的破碎机理。

A continuous reheating industrial furnace is large inertia,pure delay,multi-variables,time-vary-ing,intercoupling complicated controlled plant,and has many uncertain factors.

连续式加热是个典型具有大惯、后、多变量、时变并且相互耦合的复杂被控对象,而且有许多不确定因素。

The medium and small - sized furnace stack gunning with unshaped refractory materials is a new repatching technology.

中小型高身内衬喷补是采用不定型耐火材料以喷射法修复身的一项新技术。

The practice showed that the blast furnace slags mainly consisted of melilite,cuspidine,bivalent metallic sulphide and Ce-Ca silica.

黄长石、枪晶石、二价金属硫化物、铈钙硅石是构成高渣的主要矿物。

There was a low protecting wall to knock down the heat blasting from the pit of the furnace.

有一堵低矮的护壁挡住从膛里喷出的火焰。

The relation of internal microstructure damage degree of furnace tube in a ethylene pyrolyzer with weldability was studied.

研究了乙烯裂解服役管材料内部的组织损伤程度与焊接的关系。

The paper expounds and contrasts improved MC FeMn presmelting process adding ore in rocking furnace with original process .

论述了生产中碳锰铁的原摇预炼工艺和改进后的摇加矿预炼工艺的特点,并进行了对比。

The ethanol was dropped into furnace meanwhile ammonia was put through to nitempering. and the process parameter was optimized.

在通氨的同时,将乙醇直接滴入工作内,实现气体软氮化,并对工艺进行了优选。

Application: It is the most ideal filler material of reburner , reacting furnace, filler furnace on oil and chemical industries.

是广大石油、化工行业中转化、反应、填料塔中最为理想的填料。

On the other hand, improving the serving environments，such as optimizing the furnace’s structure, regulating manhandle, etc. increase of service life.

另一方面，改善使用环境，如通过型改进优化，规范人为操作等措施，以提高其使用寿命。

Single chamber high pressure gas quenching vacuum furnace,double chamber and multichamber vacuum furnaces implementing the acetylene low pressure carburizing were briefly introduced.

简要介绍了实施乙炔低压渗碳的单室高压气淬真空,双室及多室真空。

The percentage of standard taphole arose from 83% to 100% after the taphole clay was used to tapholes of blast furnace.

高使用这种高能有水炮泥后,铁口合格率由以前的83％提高到100％。

We also have equipment and multi-purpose electronic resistivity automatic cryoscope and so on muffle furnace, electricity heat drum wind drying oven.

马弗、电热鼓风干燥箱等设备多功能电阻率自动测定仪。

In this study, gallium nitride nanowires were successfully grown on Silicon substrate using a simple resistive heated furnace, APCVD system, at room temperature.

发现在氮化镓材料上具有室铁磁的质，被预期能运用在磁记忆体的元件和积体电路的材料上。

The flame in the furnace can be looked at through colored glasses.

可有色眼镜观看高炉内的火焰。

The furnace broke down and the entire office building has no heat.

锅炉坏了, 整栋办公大楼没有暖气。

The metal glowed in the furnace.

金属在熔炉里发出灼热的光。

The Chatacteristics of Contop Smelting Process for cyclone furnace is discussed and make a comparison with silver furnace.

着重阐述了旋涡炉顶吹炼工艺技术特点,并与白银炉工艺指标进行比。

The casting of such a big copperware needed the metals above 1000 kilograms, also must have the big furnace.

铸造这样高大的器，所需金属料当在1000千克上，且必须有较大的熔炉。

Problems of lead-zinc-aluminium scalings in washing water system for blast furnaces gas are analyzed. The solving methods are given.

针高炉煤气洗涤水系统结铅锌铝垢问题，进行了分析探讨，并提出了解决该问题的办法。

On this basis of the research, the fragmentized mechanism of coke in a blast furnace is analyzed.

在此基础上，从理论上分析了高炉用焦炭的破碎机理。

A continuous reheating industrial furnace is large inertia,pure delay,multi-variables,time-vary-ing,intercoupling complicated controlled plant,and has many uncertain factors.

连续式加热炉是个典型具有大惯性、纯滞后、多变量、时变并且相互耦合的复杂被控象,而且有许多不确定因素。

The medium and small - sized furnace stack gunning with unshaped refractory materials is a new repatching technology.

中小型高炉炉身内衬喷补是采用不定型耐火材料喷射法修复炉身的一项新技术。

The practice showed that the blast furnace slags mainly consisted of melilite,cuspidine,bivalent metallic sulphide and Ce-Ca silica.

黄长石、枪晶石、二价金属硫化物、铈钙硅石是构成高炉渣的主要矿物。

There was a low protecting wall to knock down the heat blasting from the pit of the furnace.

有一堵低矮的护壁挡住从炉膛里喷出的火焰。

The relation of internal microstructure damage degree of furnace tube in a ethylene pyrolyzer with weldability was studied.

研究了乙烯裂解炉服役炉管材料内部的组织损伤程度与焊接性的关系。

The paper expounds and contrasts improved MC FeMn presmelting process adding ore in rocking furnace with original process .

论述了生产中碳锰铁的原摇炉预炼工艺和改进后的摇炉加矿预炼工艺的特点,并进行了比。

The ethanol was dropped into furnace meanwhile ammonia was put through to nitempering. and the process parameter was optimized.

在氨的同时,将乙醇直接滴入工作炉内,实现气体软氮化,并工艺进行了优选。

Application: It is the most ideal filler material of reburner , reacting furnace, filler furnace on oil and chemical industries.

是广大石油、化工行业中转化炉、反应炉、填料塔中最为理想的填料。

On the other hand, improving the serving environments，such as optimizing the furnace’s structure, regulating manhandle, etc. increase of service life.

另一方面，改善使用环境，如炉型改进优化，规范人为操作等措施，提高其使用寿命。

Single chamber high pressure gas quenching vacuum furnace,double chamber and multichamber vacuum furnaces implementing the acetylene low pressure carburizing were briefly introduced.

简要介绍了实施乙炔低压渗碳的单室高压气淬真空炉,双室及多室真空炉。

The percentage of standard taphole arose from 83% to 100% after the taphole clay was used to tapholes of blast furnace.

高炉使用这种高性能有水炮泥后,铁口合格率由前的83％提高到100％。

We also have equipment and multi-purpose electronic resistivity automatic cryoscope and so on muffle furnace, electricity heat drum wind drying oven.

马弗炉、电热鼓风干燥箱等设备多功能电阻率自动测定仪。

In this study, gallium nitride nanowires were successfully grown on Silicon substrate using a simple resistive heated furnace, APCVD system, at room temperature.

发现在氮化镓材料上具有室温铁磁性的性质，被预期能运用在磁性记忆体的元件和积体电路的材料上。

The flame in the furnace can be looked at through colored glasses.

可以通过有色眼镜观看高炉内的火焰。

The furnace broke down and the entire office building has no heat.

锅炉坏了, 整栋办公大楼没有暖气。

The metal glowed in the furnace.

金属在熔炉里发出灼热的光。

The Chatacteristics of Contop Smelting Process for cyclone furnace is discussed and make a comparison with silver furnace.

着重阐述了旋涡炉顶吹炼工艺技术特点,并与白银炉工艺指标进行对比。

The casting of such a big copperware needed the metals above 1000 kilograms, also must have the big furnace.

铸造这样高大的器，所需金属料当在1000千克以上，且必须有较大的熔炉。

Problems of lead-zinc-aluminium scalings in washing water system for blast furnaces gas are analyzed. The solving methods are given.

针对酒钢高炉煤气洗涤水系统结铅锌铝垢问题，进行了分析探讨，并提出了解决该问题的办法。

On this basis of the research, the fragmentized mechanism of coke in a blast furnace is analyzed.

在此基础上，从理论上分析了高炉用焦炭的破碎机理。

A continuous reheating industrial furnace is large inertia,pure delay,multi-variables,time-vary-ing,intercoupling complicated controlled plant,and has many uncertain factors.

连续式加热炉个典型具有大性、纯滞后、多变量、时变并且相互耦合的复杂被控对象,而且有许多不确定因素。

The medium and small - sized furnace stack gunning with unshaped refractory materials is a new repatching technology.

中小型高炉炉身内衬采用不定型耐火材料以射法修复炉身的一项新技术。

The practice showed that the blast furnace slags mainly consisted of melilite,cuspidine,bivalent metallic sulphide and Ce-Ca silica.

黄长石、枪晶石、二价金属硫化物、铈钙硅石构成高炉渣的主要矿物。

There was a low protecting wall to knock down the heat blasting from the pit of the furnace.

有一堵低矮的护壁挡住从炉膛里出的火焰。

The relation of internal microstructure damage degree of furnace tube in a ethylene pyrolyzer with weldability was studied.

研究了乙烯裂解炉服役炉管材料内部的织损伤程度与焊接性的关系。

The paper expounds and contrasts improved MC FeMn presmelting process adding ore in rocking furnace with original process .

论述了生产中碳锰铁的原摇炉预炼工艺和改进后的摇炉加矿预炼工艺的特点,并进行了对比。

The ethanol was dropped into furnace meanwhile ammonia was put through to nitempering. and the process parameter was optimized.

在通氨的同时,将乙醇直接滴入工作炉内,实现气体软氮化,并对工艺进行了优选。

Application: It is the most ideal filler material of reburner , reacting furnace, filler furnace on oil and chemical industries.

广大石油、化工行业中转化炉、反应炉、填料塔中最为理想的填料。

On the other hand, improving the serving environments，such as optimizing the furnace’s structure, regulating manhandle, etc. increase of service life.

另一方面，改善使用环境，如通过炉型改进优化，规范人为操作等措施，以提高其使用寿命。

Single chamber high pressure gas quenching vacuum furnace,double chamber and multichamber vacuum furnaces implementing the acetylene low pressure carburizing were briefly introduced.

简要介绍了实施乙炔低压渗碳的单室高压气淬真空炉,双室及多室真空炉。

The percentage of standard taphole arose from 83% to 100% after the taphole clay was used to tapholes of blast furnace.

高炉使用这种高性能有水炮泥后,铁口合格率由以前的83％提高到100％。

We also have equipment and multi-purpose electronic resistivity automatic cryoscope and so on muffle furnace, electricity heat drum wind drying oven.

马弗炉、电热鼓风干燥箱等设备多功能电阻率自动测定仪。

In this study, gallium nitride nanowires were successfully grown on Silicon substrate using a simple resistive heated furnace, APCVD system, at room temperature.

发现在氮化镓材料上具有室温铁磁性的性质，被预期能运用在磁性记忆体的元件和积体电路的材料上。