The reaction between polystyrene having oxazoline groups(RPS) and chlorinated polyethylene(CPE) was investigated by FTIR, DSC methods.

用FTIR、DSC等方法研究了含恶唑啉官能团的聚苯乙烯(RPS)与氯化聚乙烯(CPE)之间的反应。

The thermal decomposition of single, double-and triple-base nitroguanidine propellants was studied by differential scanning calorimetry (DSC).

用差示扫描量热计（DSC）研究了单基、双基三基药热解性能。

The structure and properties of polyorganosiloxane-acrylate emulsion copolymer were investigated by IR, XPS, DSC, 1H-NMR, WAXD.

利用红、电子能、差热、核磁共振、X射线衍射等方法对聚硅氧改性丙烯酸酯共聚物的结构性能进行了研究。

The dehydriding temperature and dehydriding capacity were evaluated by differential scanning calorimeter (DSC) and thermogravimetric analysis (TG).

运用差热热重对储氢材料的放氢温度放氢量进行了测试。

The crystallization porperty of polycaprolactam(PA6)-polyethylene glycol(PEG)block copolymer wasinvestigated by means of electron microscope,x-ray diffraction,DSC and hot stage polarized microscope.

应用DSC、热台、扫描电镜以及偏显微镜等研究了PA6-PEG嵌段共聚物的结晶性能。

The effect of ethylene comonomer content on the crystallization, mechanical and viscoelastic properties of VERSIFY copolymers was studied by DSC, DMTA, POM and WAXD.

通过DSC，DMTA，POMWAXD等手段，研究了乙烯共聚单体含量的变化对VERSIFY共聚物结晶性能、力学性能粘弹性能的影响。

During heating,phase transformation and expansibility of the new quartz sands and the calcined Quartz sands from two places were determined by DSC and thermodilatometry.

本研究采用DSC热膨胀仪对两种石英砂的原砂焙烧砂在加热过程中的相变热膨胀进行了。

The changing of the structure and properties of UHMWPE fibres during super drawing were studied by means of SEM, DSC, WAXD and sound pulsimeter.

还借助扫描电子显微镜（SEM）、热（DSC）、广角X射线衍射（WAXD）、声速等手段研究了UHMWPE熔纺丝在超拉伸过程中结构性能的变化。

Using lead benzoxy as curing agent,cured epoxy resin was analyzed by means of IR spectrum and DSC curves.Lead benzoxy was considered to be catalytic curing agent.

采用苯甲酸铅做固化剂，通过对环氧树脂固化物的红及DSC曲线，认为苯甲酸铅是一种催化型固化剂。

Abstract： Using lead benzoxy as curing agent,cured epoxy resin was analyzed by means of IR spectrum and DSC curves.Lead benzoxy was considered to be catalytic curing agent.

摘 要： 采用苯甲酸铅做固化剂，通过对环氧树脂固化物的红及DSC曲线，认为苯甲酸铅是一种催化型固化剂。

The photographs of polarizing microscope showed the number of spherocrystal was increased and the diameter was decreased after saponification reaction which was agreed with the studies of DSC.

试样的偏显微镜观察结果表明，醇解后，球晶数目增加、直径减小、完善程度降低。

The reaction between polystyrene having oxazoline groups(RPS) and chlorinated polyethylene(CPE) was investigated by FTIR, DSC methods.

用FTIR、DSC等方法研恶唑啉官团的聚苯乙烯(RPS)与氯化聚乙烯(CPE)之间的反应。

The thermal decomposition of single, double-and triple-base nitroguanidine propellants was studied by differential scanning calorimetry (DSC).

用差示扫描量热计（DSC）研单基、双基和三基药热分解。

The structure and properties of polyorganosiloxane-acrylate emulsion copolymer were investigated by IR, XPS, DSC, 1H-NMR, WAXD.

利用红外光谱、光电子谱、差热分析、核磁共振、X射线衍射等方法对聚硅氧改丙烯酸酯共聚物的结构和进行研。

The dehydriding temperature and dehydriding capacity were evaluated by differential scanning calorimeter (DSC) and thermogravimetric analysis (TG).

运用差热分析和热重分析对储氢材料的放氢温度和放氢量进行测试。

The crystallization porperty of polycaprolactam(PA6)-polyethylene glycol(PEG)block copolymer wasinvestigated by means of electron microscope,x-ray diffraction,DSC and hot stage polarized microscope.

应用DSC、热台、扫描电镜以及偏光显微镜等研PA6-PEG嵌段共聚物的结。

The effect of ethylene comonomer content on the crystallization, mechanical and viscoelastic properties of VERSIFY copolymers was studied by DSC, DMTA, POM and WAXD.

通过DSC，DMTA，POM和WAXD等手段，研乙烯共聚单体量的变化对VERSIFY共聚物结、力学和粘弹的影响。

During heating,phase transformation and expansibility of the new quartz sands and the calcined Quartz sands from two places were determined by DSC and thermodilatometry.

本研采用DSC和热膨胀仪对两种石英砂的原砂和焙烧砂在加热过程中的相变和热膨胀进行分析。

The changing of the structure and properties of UHMWPE fibres during super drawing were studied by means of SEM, DSC, WAXD and sound pulsimeter.

还借助扫描电子显微镜（SEM）、热分析（DSC）、广角X射线衍射（WAXD）、声速等手段研UHMWPE熔纺丝在超拉伸过程中结构的变化。

Using lead benzoxy as curing agent,cured epoxy resin was analyzed by means of IR spectrum and DSC curves.Lead benzoxy was considered to be catalytic curing agent.

采用苯甲酸铅做固化剂，通过对环氧树脂固化物的红外光谱及DSC曲线分析，认为苯甲酸铅是一种催化型固化剂。

Abstract： Using lead benzoxy as curing agent,cured epoxy resin was analyzed by means of IR spectrum and DSC curves.Lead benzoxy was considered to be catalytic curing agent.

摘 要： 采用苯甲酸铅做固化剂，通过对环氧树脂固化物的红外光谱及DSC曲线分析，认为苯甲酸铅是一种催化型固化剂。

The photographs of polarizing microscope showed the number of spherocrystal was increased and the diameter was decreased after saponification reaction which was agreed with the studies of DSC.

试样的偏光显微镜观察结果表明，醇解后，球数目增加、直径减小、完善程度降低。

The reaction between polystyrene having oxazoline groups(RPS) and chlorinated polyethylene(CPE) was investigated by FTIR, DSC methods.

用FTIR、DSC等方法研究了含恶唑啉官能团的聚苯乙烯(RPS)与氯化聚乙烯(CPE)之间的反应。

The thermal decomposition of single, double-and triple-base nitroguanidine propellants was studied by differential scanning calorimetry (DSC).

用差示扫描量计（DSC）研究了单基、双基和三基药性能。

The structure and properties of polyorganosiloxane-acrylate emulsion copolymer were investigated by IR, XPS, DSC, 1H-NMR, WAXD.

利用红外光谱、光电子能谱、差析、核磁共振、X射线衍射等方法对聚硅氧改性丙烯酸酯共聚物的结构和性能进行了研究。

The dehydriding temperature and dehydriding capacity were evaluated by differential scanning calorimeter (DSC) and thermogravimetric analysis (TG).

运用差析和重析对料的放温度和放量进行了测试。

The crystallization porperty of polycaprolactam(PA6)-polyethylene glycol(PEG)block copolymer wasinvestigated by means of electron microscope,x-ray diffraction,DSC and hot stage polarized microscope.

应用DSC、台、扫描电镜以及偏光显微镜等研究了PA6-PEG嵌段共聚物的结晶性能。

The effect of ethylene comonomer content on the crystallization, mechanical and viscoelastic properties of VERSIFY copolymers was studied by DSC, DMTA, POM and WAXD.

通过DSC，DMTA，POM和WAXD等手段，研究了乙烯共聚单体含量的变化对VERSIFY共聚物结晶性能、力学性能和粘弹性能的影响。

During heating,phase transformation and expansibility of the new quartz sands and the calcined Quartz sands from two places were determined by DSC and thermodilatometry.

本研究采用DSC和膨胀仪对两种石英砂的原砂和焙烧砂在加过程中的相变和膨胀进行了析。

The changing of the structure and properties of UHMWPE fibres during super drawing were studied by means of SEM, DSC, WAXD and sound pulsimeter.

还借助扫描电子显微镜（SEM）、析（DSC）、广角X射线衍射（WAXD）、声速等手段研究了UHMWPE熔纺丝在超拉伸过程中结构性能的变化。

Using lead benzoxy as curing agent,cured epoxy resin was analyzed by means of IR spectrum and DSC curves.Lead benzoxy was considered to be catalytic curing agent.

采用苯甲酸铅做固化剂，通过对环氧树脂固化物的红外光谱及DSC曲线析，认为苯甲酸铅是一种催化型固化剂。

Abstract： Using lead benzoxy as curing agent,cured epoxy resin was analyzed by means of IR spectrum and DSC curves.Lead benzoxy was considered to be catalytic curing agent.

摘 要： 采用苯甲酸铅做固化剂，通过对环氧树脂固化物的红外光谱及DSC曲线析，认为苯甲酸铅是一种催化型固化剂。

The photographs of polarizing microscope showed the number of spherocrystal was increased and the diameter was decreased after saponification reaction which was agreed with the studies of DSC.

试样的偏光显微镜观察结果表明，醇后，球晶数目增加、直径减小、完善程度降低。

The reaction between polystyrene having oxazoline groups(RPS) and chlorinated polyethylene(CPE) was investigated by FTIR, DSC methods.

用FTIR、DSC等方法研究了含恶唑啉官能团的苯乙烯(RPS)与氯化乙烯(CPE)之间的反应。

The thermal decomposition of single, double-and triple-base nitroguanidine propellants was studied by differential scanning calorimetry (DSC).

用差示扫描量热计（DSC）研究了单基、双基和三基药热分解性能。

The structure and properties of polyorganosiloxane-acrylate emulsion copolymer were investigated by IR, XPS, DSC, 1H-NMR, WAXD.

利用红外光谱、光电子能谱、差热分析、核磁振、X射线衍射等方法硅氧改性丙烯酸酯物的结构和性能进行了研究。

The dehydriding temperature and dehydriding capacity were evaluated by differential scanning calorimeter (DSC) and thermogravimetric analysis (TG).

运用差热分析和热重分析储氢材料的放氢温度和放氢量进行了测试。

The crystallization porperty of polycaprolactam(PA6)-polyethylene glycol(PEG)block copolymer wasinvestigated by means of electron microscope,x-ray diffraction,DSC and hot stage polarized microscope.

应用DSC、热台、扫描电镜以及偏光显微镜等研究了PA6-PEG嵌段物的结晶性能。

The effect of ethylene comonomer content on the crystallization, mechanical and viscoelastic properties of VERSIFY copolymers was studied by DSC, DMTA, POM and WAXD.

通过DSC，DMTA，POM和WAXD等手段，研究了乙烯单体含量的变化VERSIFY物结晶性能、力学性能和粘弹性能的影响。

During heating,phase transformation and expansibility of the new quartz sands and the calcined Quartz sands from two places were determined by DSC and thermodilatometry.

本研究采用DSC和热膨胀仪两种石英砂的原砂和焙烧砂在加热过程中的相变和热膨胀进行了分析。

The changing of the structure and properties of UHMWPE fibres during super drawing were studied by means of SEM, DSC, WAXD and sound pulsimeter.

还借助扫描电子显微镜（SEM）、热分析（DSC）、广角X射线衍射（WAXD）、声速等手段研究了UHMWPE熔纺丝在超拉伸过程中结构性能的变化。

Using lead benzoxy as curing agent,cured epoxy resin was analyzed by means of IR spectrum and DSC curves.Lead benzoxy was considered to be catalytic curing agent.

采用苯甲酸铅做固化剂，通过环氧树脂固化物的红外光谱及DSC曲线分析，认为苯甲酸铅是一种催化型固化剂。

Abstract： Using lead benzoxy as curing agent,cured epoxy resin was analyzed by means of IR spectrum and DSC curves.Lead benzoxy was considered to be catalytic curing agent.

摘 要： 采用苯甲酸铅做固化剂，通过环氧树脂固化物的红外光谱及DSC曲线分析，认为苯甲酸铅是一种催化型固化剂。

The photographs of polarizing microscope showed the number of spherocrystal was increased and the diameter was decreased after saponification reaction which was agreed with the studies of DSC.

试样的偏光显微镜观察结果表明，醇解后，球晶数目增加、直径减小、完善程度降低。

The reaction between polystyrene having oxazoline groups(RPS) and chlorinated polyethylene(CPE) was investigated by FTIR, DSC methods.

用FTIR、DSC等方法含恶唑啉官能团的聚苯乙烯(RPS)与氯化聚乙烯(CPE)之间的反应。

The thermal decomposition of single, double-and triple-base nitroguanidine propellants was studied by differential scanning calorimetry (DSC).

用差示扫描热计（DSC）单基、双基和三基药热分解性能。

The structure and properties of polyorganosiloxane-acrylate emulsion copolymer were investigated by IR, XPS, DSC, 1H-NMR, WAXD.

利用红外光谱、光电子能谱、差热分析、核磁共振、X射线衍射等方法对聚硅氧改性丙烯酸酯共聚物的结构和性能行。

The dehydriding temperature and dehydriding capacity were evaluated by differential scanning calorimeter (DSC) and thermogravimetric analysis (TG).

运用差热分析和热重分析对储材料的放温度和放行测试。

The crystallization porperty of polycaprolactam(PA6)-polyethylene glycol(PEG)block copolymer wasinvestigated by means of electron microscope,x-ray diffraction,DSC and hot stage polarized microscope.

应用DSC、热台、扫描电镜以及偏光显微镜等PA6-PEG嵌段共聚物的结晶性能。

The effect of ethylene comonomer content on the crystallization, mechanical and viscoelastic properties of VERSIFY copolymers was studied by DSC, DMTA, POM and WAXD.

通过DSC，DMTA，POM和WAXD等手段，乙烯共聚单体含的变化对VERSIFY共聚物结晶性能、力学性能和粘弹性能的影响。

During heating,phase transformation and expansibility of the new quartz sands and the calcined Quartz sands from two places were determined by DSC and thermodilatometry.

本采用DSC和热膨胀仪对两种石英砂的原砂和焙烧砂在加热过程中的相变和热膨胀行分析。

The changing of the structure and properties of UHMWPE fibres during super drawing were studied by means of SEM, DSC, WAXD and sound pulsimeter.

还借助扫描电子显微镜（SEM）、热分析（DSC）、广角X射线衍射（WAXD）、声速等手段UHMWPE熔纺丝在超拉伸过程中结构性能的变化。

Using lead benzoxy as curing agent,cured epoxy resin was analyzed by means of IR spectrum and DSC curves.Lead benzoxy was considered to be catalytic curing agent.

采用苯甲酸铅做固化剂，通过对环氧树脂固化物的红外光谱及DSC曲线分析，认为苯甲酸铅是一种催化型固化剂。

Abstract： Using lead benzoxy as curing agent,cured epoxy resin was analyzed by means of IR spectrum and DSC curves.Lead benzoxy was considered to be catalytic curing agent.

摘 要： 采用苯甲酸铅做固化剂，通过对环氧树脂固化物的红外光谱及DSC曲线分析，认为苯甲酸铅是一种催化型固化剂。

The photographs of polarizing microscope showed the number of spherocrystal was increased and the diameter was decreased after saponification reaction which was agreed with the studies of DSC.

试样的偏光显微镜观察结果表明，醇解后，球晶数目增加、直径减小、完善程度降低。

The reaction between polystyrene having oxazoline groups(RPS) and chlorinated polyethylene(CPE) was investigated by FTIR, DSC methods.

用FTIR、DSC等方法研究了含恶唑啉官能团的聚苯乙烯(RPS)与氯化聚乙烯(CPE)之间的反应。

The thermal decomposition of single, double-and triple-base nitroguanidine propellants was studied by differential scanning calorimetry (DSC).

用差示扫描量热计（DSC）研究了单基、双基三基药热分解能。

The structure and properties of polyorganosiloxane-acrylate emulsion copolymer were investigated by IR, XPS, DSC, 1H-NMR, WAXD.

利用红外光谱、光电子能谱、差热分析、核、X射线衍射等方法对聚硅氧改丙烯酸酯聚物的结能进行了研究。

The dehydriding temperature and dehydriding capacity were evaluated by differential scanning calorimeter (DSC) and thermogravimetric analysis (TG).

运用差热分析热重分析对储氢材料的放氢温度放氢量进行了测试。

The crystallization porperty of polycaprolactam(PA6)-polyethylene glycol(PEG)block copolymer wasinvestigated by means of electron microscope,x-ray diffraction,DSC and hot stage polarized microscope.

应用DSC、热台、扫描电镜以及偏光显微镜等研究了PA6-PEG嵌段聚物的结晶能。

The effect of ethylene comonomer content on the crystallization, mechanical and viscoelastic properties of VERSIFY copolymers was studied by DSC, DMTA, POM and WAXD.

通过DSC，DMTA，POMWAXD等手段，研究了乙烯聚单体含量的变化对VERSIFY聚物结晶能、力学能粘弹能的影响。

During heating,phase transformation and expansibility of the new quartz sands and the calcined Quartz sands from two places were determined by DSC and thermodilatometry.

本研究采用DSC热膨胀仪对两种石英砂的原砂焙烧砂在加热过程中的相变热膨胀进行了分析。

The changing of the structure and properties of UHMWPE fibres during super drawing were studied by means of SEM, DSC, WAXD and sound pulsimeter.

还借助扫描电子显微镜（SEM）、热分析（DSC）、广角X射线衍射（WAXD）、声速等手段研究了UHMWPE熔纺丝在超拉伸过程中结能的变化。

Using lead benzoxy as curing agent,cured epoxy resin was analyzed by means of IR spectrum and DSC curves.Lead benzoxy was considered to be catalytic curing agent.

采用苯甲酸铅做固化剂，通过对环氧树脂固化物的红外光谱及DSC曲线分析，认为苯甲酸铅是一种催化型固化剂。

Abstract： Using lead benzoxy as curing agent,cured epoxy resin was analyzed by means of IR spectrum and DSC curves.Lead benzoxy was considered to be catalytic curing agent.

摘 要： 采用苯甲酸铅做固化剂，通过对环氧树脂固化物的红外光谱及DSC曲线分析，认为苯甲酸铅是一种催化型固化剂。

The photographs of polarizing microscope showed the number of spherocrystal was increased and the diameter was decreased after saponification reaction which was agreed with the studies of DSC.

试样的偏光显微镜观察结果表明，醇解后，球晶数目增加、直径减小、完善程度降低。

The reaction between polystyrene having oxazoline groups(RPS) and chlorinated polyethylene(CPE) was investigated by FTIR, DSC methods.

用FTIR、DSC法研究了含恶唑啉官能团的聚苯乙烯(RPS)与氯化聚乙烯(CPE)之间的反应。

The thermal decomposition of single, double-and triple-base nitroguanidine propellants was studied by differential scanning calorimetry (DSC).

用差示扫描量热计（DSC）研究了单基、双基三基药热分解性能。

The structure and properties of polyorganosiloxane-acrylate emulsion copolymer were investigated by IR, XPS, DSC, 1H-NMR, WAXD.

利用红外光谱、光电子能谱、差热分析、核磁共振、X射线衍射法对聚硅氧改性丙烯酸酯共聚物的结构性能进行了研究。

The dehydriding temperature and dehydriding capacity were evaluated by differential scanning calorimeter (DSC) and thermogravimetric analysis (TG).

运用差热分析热重分析对储氢材料的放氢温度放氢量进行了测试。

The crystallization porperty of polycaprolactam(PA6)-polyethylene glycol(PEG)block copolymer wasinvestigated by means of electron microscope,x-ray diffraction,DSC and hot stage polarized microscope.

应用DSC、热台、扫描电镜以及偏光显微镜研究了PA6-PEG嵌段共聚物的结晶性能。

The effect of ethylene comonomer content on the crystallization, mechanical and viscoelastic properties of VERSIFY copolymers was studied by DSC, DMTA, POM and WAXD.

通DSC，DMTA，POMWAXD手段，研究了乙烯共聚单体含量的变化对VERSIFY共聚物结晶性能、力学性能粘弹性能的影响。

During heating,phase transformation and expansibility of the new quartz sands and the calcined Quartz sands from two places were determined by DSC and thermodilatometry.

本研究采用DSC热膨胀仪对两种石英砂的原砂焙烧砂在加热程中的相变热膨胀进行了分析。

The changing of the structure and properties of UHMWPE fibres during super drawing were studied by means of SEM, DSC, WAXD and sound pulsimeter.

还借助扫描电子显微镜（SEM）、热分析（DSC）、广角X射线衍射（WAXD）、声速手段研究了UHMWPE熔纺丝在超拉伸程中结构性能的变化。

Using lead benzoxy as curing agent,cured epoxy resin was analyzed by means of IR spectrum and DSC curves.Lead benzoxy was considered to be catalytic curing agent.

采用苯甲酸铅做固化剂，通对环氧树脂固化物的红外光谱及DSC曲线分析，认为苯甲酸铅是一种催化型固化剂。

Abstract： Using lead benzoxy as curing agent,cured epoxy resin was analyzed by means of IR spectrum and DSC curves.Lead benzoxy was considered to be catalytic curing agent.

摘 要： 采用苯甲酸铅做固化剂，通对环氧树脂固化物的红外光谱及DSC曲线分析，认为苯甲酸铅是一种催化型固化剂。

The photographs of polarizing microscope showed the number of spherocrystal was increased and the diameter was decreased after saponification reaction which was agreed with the studies of DSC.

试样的偏光显微镜观察结果表明，醇解后，球晶数目增加、直径减小、完善程度降低。

The reaction between polystyrene having oxazoline groups(RPS) and chlorinated polyethylene(CPE) was investigated by FTIR, DSC methods.

用FTIR、DSC等方法研究了含官能团聚苯乙烯(RPS)与氯化聚乙烯(CPE)之间反应。

The thermal decomposition of single, double-and triple-base nitroguanidine propellants was studied by differential scanning calorimetry (DSC).

用差示扫描量热计（DSC）研究了单基、双基和三基药热分解性能。

The structure and properties of polyorganosiloxane-acrylate emulsion copolymer were investigated by IR, XPS, DSC, 1H-NMR, WAXD.

利用红外光谱、光电子能谱、差热分析、核磁共振、X射线衍射等方法对聚硅氧改性丙烯酸酯共聚构和性能进行了研究。

The dehydriding temperature and dehydriding capacity were evaluated by differential scanning calorimeter (DSC) and thermogravimetric analysis (TG).

运用差热分析和热重分析对储氢材料放氢温度和放氢量进行了测试。

The crystallization porperty of polycaprolactam(PA6)-polyethylene glycol(PEG)block copolymer wasinvestigated by means of electron microscope,x-ray diffraction,DSC and hot stage polarized microscope.

应用DSC、热台、扫描电镜以及偏光显微镜等研究了PA6-PEG嵌段共聚晶性能。

The effect of ethylene comonomer content on the crystallization, mechanical and viscoelastic properties of VERSIFY copolymers was studied by DSC, DMTA, POM and WAXD.

通过DSC，DMTA，POM和WAXD等手段，研究了乙烯共聚单体含量变化对VERSIFY共聚晶性能、力学性能和粘弹性能影响。

During heating,phase transformation and expansibility of the new quartz sands and the calcined Quartz sands from two places were determined by DSC and thermodilatometry.

本研究采用DSC和热膨胀仪对两种石英砂原砂和焙烧砂在加热过程中相变和热膨胀进行了分析。

The changing of the structure and properties of UHMWPE fibres during super drawing were studied by means of SEM, DSC, WAXD and sound pulsimeter.

还借助扫描电子显微镜（SEM）、热分析（DSC）、广角X射线衍射（WAXD）、声速等手段研究了UHMWPE熔纺丝在超拉伸过程中构性能变化。

Using lead benzoxy as curing agent,cured epoxy resin was analyzed by means of IR spectrum and DSC curves.Lead benzoxy was considered to be catalytic curing agent.

采用苯甲酸铅做固化剂，通过对环氧树脂固化红外光谱及DSC曲线分析，认为苯甲酸铅是一种催化型固化剂。

Abstract： Using lead benzoxy as curing agent,cured epoxy resin was analyzed by means of IR spectrum and DSC curves.Lead benzoxy was considered to be catalytic curing agent.

摘 要： 采用苯甲酸铅做固化剂，通过对环氧树脂固化红外光谱及DSC曲线分析，认为苯甲酸铅是一种催化型固化剂。

The photographs of polarizing microscope showed the number of spherocrystal was increased and the diameter was decreased after saponification reaction which was agreed with the studies of DSC.

试样偏光显微镜观察果表明，醇解后，球晶数目增加、直径减小、完善程度降低。

The reaction between polystyrene having oxazoline groups(RPS) and chlorinated polyethylene(CPE) was investigated by FTIR, DSC methods.

用FTIR、DSC等方法研究含恶唑啉官能团的聚苯乙烯(RPS)与氯化聚乙烯(CPE)之间的反应。

The thermal decomposition of single, double-and triple-base nitroguanidine propellants was studied by differential scanning calorimetry (DSC).

用差示扫描量热计（DSC）研究、双三药热分解性能。

The structure and properties of polyorganosiloxane-acrylate emulsion copolymer were investigated by IR, XPS, DSC, 1H-NMR, WAXD.

利用红外光谱、光电子能谱、差热分析、核磁共振、X射线衍射等方法对聚硅氧改性丙烯酸酯共聚物的结构性能进行研究。

The dehydriding temperature and dehydriding capacity were evaluated by differential scanning calorimeter (DSC) and thermogravimetric analysis (TG).

运用差热分析热重分析对储材料的温度量进行测试。

The crystallization porperty of polycaprolactam(PA6)-polyethylene glycol(PEG)block copolymer wasinvestigated by means of electron microscope,x-ray diffraction,DSC and hot stage polarized microscope.

应用DSC、热台、扫描电镜以及偏光显微镜等研究PA6-PEG嵌段共聚物的结晶性能。

The effect of ethylene comonomer content on the crystallization, mechanical and viscoelastic properties of VERSIFY copolymers was studied by DSC, DMTA, POM and WAXD.

通过DSC，DMTA，POMWAXD等手段，研究乙烯共聚体含量的变化对VERSIFY共聚物结晶性能、力学性能粘弹性能的影响。

During heating,phase transformation and expansibility of the new quartz sands and the calcined Quartz sands from two places were determined by DSC and thermodilatometry.

本研究采用DSC热膨胀仪对两种石英砂的原砂焙烧砂在加热过程中的相变热膨胀进行分析。

The changing of the structure and properties of UHMWPE fibres during super drawing were studied by means of SEM, DSC, WAXD and sound pulsimeter.

还借助扫描电子显微镜（SEM）、热分析（DSC）、广角X射线衍射（WAXD）、声速等手段研究UHMWPE熔纺丝在超拉伸过程中结构性能的变化。

Using lead benzoxy as curing agent,cured epoxy resin was analyzed by means of IR spectrum and DSC curves.Lead benzoxy was considered to be catalytic curing agent.

采用苯甲酸铅做固化剂，通过对环氧树脂固化物的红外光谱及DSC曲线分析，认为苯甲酸铅是一种催化型固化剂。

Abstract： Using lead benzoxy as curing agent,cured epoxy resin was analyzed by means of IR spectrum and DSC curves.Lead benzoxy was considered to be catalytic curing agent.

摘 要： 采用苯甲酸铅做固化剂，通过对环氧树脂固化物的红外光谱及DSC曲线分析，认为苯甲酸铅是一种催化型固化剂。

The photographs of polarizing microscope showed the number of spherocrystal was increased and the diameter was decreased after saponification reaction which was agreed with the studies of DSC.

试样的偏光显微镜观察结果表明，醇解后，球晶数目增加、直径减小、完善程度降低。