These parts are fully interchangeable with those in other machines.

这些零件完全可以同其他机器的零件相互替换。

Each component is carefully checked before assembly.

每个零件在装配前都经过仔细检查。

Pinouts for most components easily available through the web.

在网上大多数零件的针脚都能查得到。

He was dismissed for stealing bicycle parts.

他因偷窃自行车零件而被解雇。

This refrigerator is fabricated from parts made in different factories.

这台电冰箱是由不同的工厂所制的零件组装的。

The accident has been assigned to a faulty part in the engine of the bus.

那次事故是因为汽车发动机中有一个有毛病的零件。

Replacin oil quenching process with austemper process, bend intension of part and stability in using are advanced.

针对具体零件,应用等温淬火工艺代替油冷淬火工艺,提高零件的屈服强度,使零件在使用过程中的稳定性得到提高。

The bicycle is good in parts.

这自行车有些零件是好的。

The warranty covers all power-train components.

保修单包括电动火车的所有零件。

Mouser Electronics stocks suitable parts if you substitute a pair of 0.47uF caps for the 1uF electrolytics.

电影帽子实在有点大,但有空间,如果你把一些工作,为寻求微型零件.

The process calculations such as layout chart of punching die for locatized plate, punching pressure, pressural center and etc.

分析接线片的结构特点和冲压工艺性,介绍零件的排样设计方案、模具结构及主要特点。

The optimeter is widely used to precisely measure external size ofworkpiece by comparison with a gauge block or standard part.

本仪器是一种采用块或标准零件与试件相比较的方式体外形尺寸的仪器。

The conception model, assembly model and parts model of pneumatic hole impinger are established by the method of intelligent modeling.

采用智能产品建模的方法,建立气动潜孔冲击器的概念模型、装配模型和零件模型。

Then after thick, the essence two axle diameter localization drills the thread, the keyseat and the mill crank end surface.

机械加工工艺是规定产品或零件机械加工工艺过程和操作方法，是指导生产的重要的技术性文件。

Thus under the condition of without component as sembling diagram, solve the problem of assembling projectile weaving machine with knock-down parts.

从而解决在没有零件装配图的情况下，装配散件片梭织机的问题。

But in the couse of lathing and dawdling,the trouble of deformation,empyrosis and crack lf parts often appears which affects seriously the processing quality.

但在磨削过程中,易出现变形、烧伤及裂纹等问题,影响零件的加工质。

The technique character of the baffle of inspirator was introduced.A feasible process plan was determined and the integral piercing blanking bending forming die was designed.

介绍呼吸器挡板零件工艺特点,确定合理的工艺方案,设计1副落料、冲孔、压弯三道工序一次成形的模具。

According to the concept of context process problem space,. the concept of Directed Assembly Relationship Graph(DARG) was put forward. The isomorph of DARG was defined.

根据上下文工艺问题空间的概念,提出有向装配关系图的概念,定义有向装配关系图同构,以有向装配关系图和零件通用属性来构建实例库。

The goal of the mesh optimization algorithm is to re duce the number of the triangles in the mesh,and keep the accuracy of the interp olation at the same time.

反求工程中曲面反求得到的数据模型虽然可以正确反映零件的拓扑结构，但网格上的三角形的数一般比较大。

These parts are fully interchangeable with those in other machines.

这些零件完全可以同其他机器零件相互替换。

Each component is carefully checked before assembly.

每个零件在装配前都经过仔细检查。

Pinouts for most components easily available through the web.

在网上大多数零件针脚都能查得到。

He was dismissed for stealing bicycle parts.

他因偷窃自行零件而被解雇。

This refrigerator is fabricated from parts made in different factories.

这台电冰箱是由不同工厂所制零件组装。

The accident has been assigned to a faulty part in the engine of the bus.

故是因为汽发动机中有一个有毛病零件。

Replacin oil quenching process with austemper process, bend intension of part and stability in using are advanced.

针对具体零件,应用等温淬工艺代替油冷淬工艺,提高零件屈服强度,使零件在使用过程中稳定性得到提高。

The bicycle is good in parts.

这自行有些零件是好。

The warranty covers all power-train components.

保修单包括电动所有零件。

Mouser Electronics stocks suitable parts if you substitute a pair of 0.47uF caps for the 1uF electrolytics.

电影帽子实在有点大,但有空间,如果你把一些工作,为寻求微型零件.

The process calculations such as layout chart of punching die for locatized plate, punching pressure, pressural center and etc.

分析接线片结构特点和冲压工艺性,介绍零件排样设计方案、模具结构及主要特点。

The optimeter is widely used to precisely measure external size ofworkpiece by comparison with a gauge block or standard part.

本仪器是一种采用量块或标准零件与试件相比较方式测量物体外形尺寸仪器。

The conception model, assembly model and parts model of pneumatic hole impinger are established by the method of intelligent modeling.

采用智能产品建模方法,建立气动潜孔冲击器概念模型、装配模型和零件模型。

Then after thick, the essence two axle diameter localization drills the thread, the keyseat and the mill crank end surface.

机械加工工艺是规定产品或零件机械加工工艺过程和操作方法，是指导生产重要技术性文件。

Thus under the condition of without component as sembling diagram, solve the problem of assembling projectile weaving machine with knock-down parts.

从而解决在没有零件装配图情况下，装配散件片梭织机问题。

But in the couse of lathing and dawdling,the trouble of deformation,empyrosis and crack lf parts often appears which affects seriously the processing quality.

但在磨削过程中,易出现变形、烧伤及裂纹等问题,影响零件加工质量。

The technique character of the baffle of inspirator was introduced.A feasible process plan was determined and the integral piercing blanking bending forming die was designed.

介绍呼吸器挡板零件工艺特点,确定合理工艺方案,设计1副落料、冲孔、压弯三道工序一成形模具。

According to the concept of context process problem space,. the concept of Directed Assembly Relationship Graph(DARG) was put forward. The isomorph of DARG was defined.

根据上下文工艺问题空间概念,提出有向装配关系图概念,定义有向装配关系图同构,以有向装配关系图和零件通用属性来构建实例库。

The goal of the mesh optimization algorithm is to re duce the number of the triangles in the mesh,and keep the accuracy of the interp olation at the same time.

反求工程中曲面反求得到数据模型虽然可以正确反映零件拓扑结构，但网格上三角形数量一般比较大。

These parts are fully interchangeable with those in other machines.

这些零件完全可以同其他机器的零件相互替换。

Each component is carefully checked before assembly.

每个零件在装配前都经仔细检查。

Pinouts for most components easily available through the web.

在网上大多数零件的针脚都能查得到。

He was dismissed for stealing bicycle parts.

他因偷窃自行车零件而被解雇。

This refrigerator is fabricated from parts made in different factories.

这台电冰箱是由不同的工厂所制的零件组装的。

The accident has been assigned to a faulty part in the engine of the bus.

那次事故是因为汽车发动机有一个有毛病的零件。

Replacin oil quenching process with austemper process, bend intension of part and stability in using are advanced.

针对具体零件,应用火工艺代替油冷火工艺,提高零件的屈服强度,使零件在使用的稳定性得到提高。

The bicycle is good in parts.

这自行车有些零件是好的。

The warranty covers all power-train components.

保修单包括电动火车的所有零件。

Mouser Electronics stocks suitable parts if you substitute a pair of 0.47uF caps for the 1uF electrolytics.

电影帽子实在有点大,但有空间,如果你把一些工作,为寻求微型零件.

The process calculations such as layout chart of punching die for locatized plate, punching pressure, pressural center and etc.

分析接线片的结构特点和冲压工艺性,介绍零件的排样设计方案、模具结构及主要特点。

The optimeter is widely used to precisely measure external size ofworkpiece by comparison with a gauge block or standard part.

本仪器是一种采用量块或标准零件与试件相比较的方式测量物体外形尺寸的仪器。

The conception model, assembly model and parts model of pneumatic hole impinger are established by the method of intelligent modeling.

采用智能产品建模的方法,建立气动潜孔冲击器的概念模型、装配模型和零件模型。

Then after thick, the essence two axle diameter localization drills the thread, the keyseat and the mill crank end surface.

机械加工工艺是规定产品或零件机械加工工艺和操作方法，是指导生产的重要的技术性文件。

Thus under the condition of without component as sembling diagram, solve the problem of assembling projectile weaving machine with knock-down parts.

从而解决在没有零件装配图的情况下，装配散件片梭织机的问题。

But in the couse of lathing and dawdling,the trouble of deformation,empyrosis and crack lf parts often appears which affects seriously the processing quality.

但在磨削,易出现变形、烧伤及裂纹问题,影响零件的加工质量。

The technique character of the baffle of inspirator was introduced.A feasible process plan was determined and the integral piercing blanking bending forming die was designed.

介绍呼吸器挡板零件工艺特点,确定合理的工艺方案,设计1副落料、冲孔、压弯三道工序一次成形的模具。

According to the concept of context process problem space,. the concept of Directed Assembly Relationship Graph(DARG) was put forward. The isomorph of DARG was defined.

根据上下文工艺问题空间的概念,提出有向装配关系图的概念,定义有向装配关系图同构,以有向装配关系图和零件通用属性来构建实例库。

The goal of the mesh optimization algorithm is to re duce the number of the triangles in the mesh,and keep the accuracy of the interp olation at the same time.

反求工曲面反求得到的数据模型虽然可以正确反映零件的拓扑结构，但网格上的三角形的数量一般比较大。

These parts are fully interchangeable with those in other machines.

这些零件完全可以机器的零件相互替换。

Each component is carefully checked before assembly.

每个零件在装配前都经过仔细检查。

Pinouts for most components easily available through the web.

在网上大多数零件的针脚都能查得到。

He was dismissed for stealing bicycle parts.

因偷窃自行车零件而被解雇。

This refrigerator is fabricated from parts made in different factories.

这台电冰箱是由不的工厂所制的零件组装的。

The accident has been assigned to a faulty part in the engine of the bus.

那次事故是因为汽车发动机中有个有毛病的零件。

Replacin oil quenching process with austemper process, bend intension of part and stability in using are advanced.

针对具体零件,应用等温淬火工艺代替油冷淬火工艺,提高零件的屈服强度,使零件在使用过程中的稳定性得到提高。

The bicycle is good in parts.

这自行车有些零件是好的。

The warranty covers all power-train components.

保修单包括电动火车的所有零件。

Mouser Electronics stocks suitable parts if you substitute a pair of 0.47uF caps for the 1uF electrolytics.

电影帽子实在有点大,但有空间,如果你把些工作,为寻求微型零件.

The process calculations such as layout chart of punching die for locatized plate, punching pressure, pressural center and etc.

分析接线片的结构特点和冲压工艺性,介绍零件的排样设计方案、模具结构及主要特点。

The optimeter is widely used to precisely measure external size ofworkpiece by comparison with a gauge block or standard part.

本仪器是用量块或标准零件与试件相比较的方式测量物体外形尺寸的仪器。

The conception model, assembly model and parts model of pneumatic hole impinger are established by the method of intelligent modeling.

用智能产品建模的方法,建立气动潜孔冲击器的概念模型、装配模型和零件模型。

Then after thick, the essence two axle diameter localization drills the thread, the keyseat and the mill crank end surface.

机械加工工艺是规定产品或零件机械加工工艺过程和操作方法，是指导生产的重要的技术性文件。

Thus under the condition of without component as sembling diagram, solve the problem of assembling projectile weaving machine with knock-down parts.

从而解决在没有零件装配图的情况下，装配散件片梭织机的问题。

But in the couse of lathing and dawdling,the trouble of deformation,empyrosis and crack lf parts often appears which affects seriously the processing quality.

但在磨削过程中,易出现变形、烧伤及裂纹等问题,影响零件的加工质量。

The technique character of the baffle of inspirator was introduced.A feasible process plan was determined and the integral piercing blanking bending forming die was designed.

介绍呼吸器挡板零件工艺特点,确定合理的工艺方案,设计1副落料、冲孔、压弯三道工序次成形的模具。

According to the concept of context process problem space,. the concept of Directed Assembly Relationship Graph(DARG) was put forward. The isomorph of DARG was defined.

根据上下文工艺问题空间的概念,提出有向装配关系图的概念,定义有向装配关系图构,以有向装配关系图和零件通用属性来构建实例库。

The goal of the mesh optimization algorithm is to re duce the number of the triangles in the mesh,and keep the accuracy of the interp olation at the same time.

反求工程中曲面反求得到的数据模型虽然可以正确反映零件的拓扑结构，但网格上的三角形的数量般比较大。

These parts are fully interchangeable with those in other machines.

这些零件完全可以同其他机器的零件换。

Each component is carefully checked before assembly.

每个零件在装配前都经过仔细检查。

Pinouts for most components easily available through the web.

在网上大多数零件的针脚都能查得到。

He was dismissed for stealing bicycle parts.

他因偷窃自行车零件而被解雇。

This refrigerator is fabricated from parts made in different factories.

这台电冰箱是由不同的工厂所制的零件组装的。

The accident has been assigned to a faulty part in the engine of the bus.

那次事故是因为汽车发动机中有一个有毛病的零件。

Replacin oil quenching process with austemper process, bend intension of part and stability in using are advanced.

针对具体零件,应用等温淬火工艺代油冷淬火工艺,提高零件的屈服强度,使零件在使用过程中的稳定性得到提高。

The bicycle is good in parts.

这自行车有些零件是好的。

The warranty covers all power-train components.

保修单包括电动火车的所有零件。

Mouser Electronics stocks suitable parts if you substitute a pair of 0.47uF caps for the 1uF electrolytics.

电影帽子实在有点大,但有空间,如果你把一些工作,为寻求微型零件.

The process calculations such as layout chart of punching die for locatized plate, punching pressure, pressural center and etc.

分析接线片的结构点和冲压工艺性,介绍零件的排样设计方案、模具结构及点。

The optimeter is widely used to precisely measure external size ofworkpiece by comparison with a gauge block or standard part.

本仪器是一种采用量块或标准零件与试件比较的方式测量物体外形尺寸的仪器。

The conception model, assembly model and parts model of pneumatic hole impinger are established by the method of intelligent modeling.

采用智能产品建模的方法,建立气动潜孔冲击器的概念模型、装配模型和零件模型。

Then after thick, the essence two axle diameter localization drills the thread, the keyseat and the mill crank end surface.

机械加工工艺是规定产品或零件机械加工工艺过程和操作方法，是指导生产的重的技术性文件。

Thus under the condition of without component as sembling diagram, solve the problem of assembling projectile weaving machine with knock-down parts.

从而解决在没有零件装配图的情况下，装配散件片梭织机的问题。

But in the couse of lathing and dawdling,the trouble of deformation,empyrosis and crack lf parts often appears which affects seriously the processing quality.

但在磨削过程中,易出现变形、烧伤及裂纹等问题,影响零件的加工质量。

The technique character of the baffle of inspirator was introduced.A feasible process plan was determined and the integral piercing blanking bending forming die was designed.

介绍呼吸器挡板零件工艺点,确定合理的工艺方案,设计1副落料、冲孔、压弯三道工序一次成形的模具。

According to the concept of context process problem space,. the concept of Directed Assembly Relationship Graph(DARG) was put forward. The isomorph of DARG was defined.

根据上下文工艺问题空间的概念,提出有向装配关系图的概念,定义有向装配关系图同构,以有向装配关系图和零件通用属性来构建实例库。

The goal of the mesh optimization algorithm is to re duce the number of the triangles in the mesh,and keep the accuracy of the interp olation at the same time.

反求工程中曲面反求得到的数据模型虽然可以正确反映零件的拓扑结构，但网格上的三角形的数量一般比较大。

These parts are fully interchangeable with those in other machines.

这些零件完全可以同其他机器零件相互替换。

Each component is carefully checked before assembly.

每个零件在装配前经过仔细检查。

Pinouts for most components easily available through the web.

在网上大多数零件针查得到。

He was dismissed for stealing bicycle parts.

他因偷窃自行车零件而被解雇。

This refrigerator is fabricated from parts made in different factories.

这台电冰箱是由不同工厂所制零件组装。

The accident has been assigned to a faulty part in the engine of the bus.

那次事故是因为汽车发动机中有一个有毛病零件。

Replacin oil quenching process with austemper process, bend intension of part and stability in using are advanced.

针对具体零件,应用等温淬火工艺代替油冷淬火工艺,提高零件屈服强度,使零件在使用过程中稳定性得到提高。

The bicycle is good in parts.

这自行车有些零件是好。

The warranty covers all power-train components.

保修单包括电动火车所有零件。

Mouser Electronics stocks suitable parts if you substitute a pair of 0.47uF caps for the 1uF electrolytics.

电影帽子实在有点大,但有空间,如果你把一些工作,为寻求微型零件.

The process calculations such as layout chart of punching die for locatized plate, punching pressure, pressural center and etc.

分析接线构特点和冲压工艺性,介绍零件排样设计方案、模具构及主要特点。

The optimeter is widely used to precisely measure external size ofworkpiece by comparison with a gauge block or standard part.

本仪器是一种采用量块或标准零件与试件相比较方式测量物体外形尺寸仪器。

The conception model, assembly model and parts model of pneumatic hole impinger are established by the method of intelligent modeling.

采用智产品建模方法,建立气动潜孔冲击器概念模型、装配模型和零件模型。

Then after thick, the essence two axle diameter localization drills the thread, the keyseat and the mill crank end surface.

机械加工工艺是规定产品或零件机械加工工艺过程和操作方法，是指导生产重要技术性文件。

Thus under the condition of without component as sembling diagram, solve the problem of assembling projectile weaving machine with knock-down parts.

从而解决在没有零件装配图情况下，装配散件梭织机问题。

But in the couse of lathing and dawdling,the trouble of deformation,empyrosis and crack lf parts often appears which affects seriously the processing quality.

但在磨削过程中,易出现变形、烧伤及裂纹等问题,影响零件加工质量。

The technique character of the baffle of inspirator was introduced.A feasible process plan was determined and the integral piercing blanking bending forming die was designed.

介绍呼吸器挡板零件工艺特点,确定合理工艺方案,设计1副落料、冲孔、压弯三道工序一次成形模具。

According to the concept of context process problem space,. the concept of Directed Assembly Relationship Graph(DARG) was put forward. The isomorph of DARG was defined.

根据上下文工艺问题空间概念,提出有向装配关系图概念,定义有向装配关系图同构,以有向装配关系图和零件通用属性来构建实例库。

The goal of the mesh optimization algorithm is to re duce the number of the triangles in the mesh,and keep the accuracy of the interp olation at the same time.

反求工程中曲面反求得到数据模型虽然可以正确反映零件拓扑构，但网格上三角形数量一般比较大。

These parts are fully interchangeable with those in other machines.

这些零件完全可以同其他机器的零件换。

Each component is carefully checked before assembly.

每个零件在装配前都经过仔细检查。

Pinouts for most components easily available through the web.

在网上大多数零件的针脚都能查得到。

He was dismissed for stealing bicycle parts.

他因偷窃自行车零件而被解雇。

This refrigerator is fabricated from parts made in different factories.

这台电冰箱是由不同的工厂所制的零件组装的。

The accident has been assigned to a faulty part in the engine of the bus.

那次事故是因为汽车发动机中有一个有毛病的零件。

Replacin oil quenching process with austemper process, bend intension of part and stability in using are advanced.

针对具体零件,应用等温淬火工艺代油冷淬火工艺,提高零件的屈服强度,使零件在使用过程中的稳定性得到提高。

The bicycle is good in parts.

这自行车有些零件是好的。

The warranty covers all power-train components.

保修单包括电动火车的所有零件。

Mouser Electronics stocks suitable parts if you substitute a pair of 0.47uF caps for the 1uF electrolytics.

电影帽子实在有点大,但有空间,如果你把一些工作,为寻求微型零件.

The process calculations such as layout chart of punching die for locatized plate, punching pressure, pressural center and etc.

分析接线片的结构点和冲压工艺性,介绍零件的排样设计方案、模具结构及点。

The optimeter is widely used to precisely measure external size ofworkpiece by comparison with a gauge block or standard part.

本仪器是一种采用量块或标准零件与试件比较的方式测量物体外形尺寸的仪器。

The conception model, assembly model and parts model of pneumatic hole impinger are established by the method of intelligent modeling.

采用智能产品建模的方法,建立气动潜孔冲击器的概念模型、装配模型和零件模型。

Then after thick, the essence two axle diameter localization drills the thread, the keyseat and the mill crank end surface.

机械加工工艺是规定产品或零件机械加工工艺过程和操作方法，是指导生产的重的技术性文件。

Thus under the condition of without component as sembling diagram, solve the problem of assembling projectile weaving machine with knock-down parts.

从而解决在没有零件装配图的情况下，装配散件片梭织机的问题。

But in the couse of lathing and dawdling,the trouble of deformation,empyrosis and crack lf parts often appears which affects seriously the processing quality.

但在磨削过程中,易出现变形、烧伤及裂纹等问题,影响零件的加工质量。

The technique character of the baffle of inspirator was introduced.A feasible process plan was determined and the integral piercing blanking bending forming die was designed.

介绍呼吸器挡板零件工艺点,确定合理的工艺方案,设计1副落料、冲孔、压弯三道工序一次成形的模具。

According to the concept of context process problem space,. the concept of Directed Assembly Relationship Graph(DARG) was put forward. The isomorph of DARG was defined.

根据上下文工艺问题空间的概念,提出有向装配关系图的概念,定义有向装配关系图同构,以有向装配关系图和零件通用属性来构建实例库。

The goal of the mesh optimization algorithm is to re duce the number of the triangles in the mesh,and keep the accuracy of the interp olation at the same time.

反求工程中曲面反求得到的数据模型虽然可以正确反映零件的拓扑结构，但网格上的三角形的数量一般比较大。

These parts are fully interchangeable with those in other machines.

这些零件完全可以同其他机器的零件相互替换。

Each component is carefully checked before assembly.

每个零件在装配前都经过仔细检查。

Pinouts for most components easily available through the web.

在网上大多数零件的针脚都能查得到。

He was dismissed for stealing bicycle parts.

他因偷窃自行车零件而被解雇。

This refrigerator is fabricated from parts made in different factories.

这台电冰箱是由不同的工厂所制的零件组装的。

The accident has been assigned to a faulty part in the engine of the bus.

那次事故是因为汽车发动机中有一个有毛病的零件。

Replacin oil quenching process with austemper process, bend intension of part and stability in using are advanced.

针对具体零件,应用等温淬火工艺代替油冷淬火工艺,提高零件的屈服强度,使零件在使用过程中的稳定性得到提高。

The bicycle is good in parts.

这自行车有些零件是好的。

The warranty covers all power-train components.

保修单包括电动火车的所有零件。

Mouser Electronics stocks suitable parts if you substitute a pair of 0.47uF caps for the 1uF electrolytics.

电影帽子实在有点大,但有空间,如果你把一些工作,为寻求微型零件.

The process calculations such as layout chart of punching die for locatized plate, punching pressure, pressural center and etc.

分析接线片的结构特点和冲压工艺性,介绍零件的排样设计方案、模具结构及主要特点。

The optimeter is widely used to precisely measure external size ofworkpiece by comparison with a gauge block or standard part.

本仪器是一种采用块或标准零件与试件相比较的方物体外形尺寸的仪器。

The conception model, assembly model and parts model of pneumatic hole impinger are established by the method of intelligent modeling.

采用智能产品建模的方法,建立气动潜孔冲击器的概念模型、装配模型和零件模型。

Then after thick, the essence two axle diameter localization drills the thread, the keyseat and the mill crank end surface.

机械加工工艺是规定产品或零件机械加工工艺过程和操作方法，是指导生产的重要的技术性文件。

Thus under the condition of without component as sembling diagram, solve the problem of assembling projectile weaving machine with knock-down parts.

从而解决在没有零件装配图的情况下，装配散件片梭织机的问题。

But in the couse of lathing and dawdling,the trouble of deformation,empyrosis and crack lf parts often appears which affects seriously the processing quality.

但在磨削过程中,易出现变形、烧伤及裂纹等问题,影响零件的加工质。

The technique character of the baffle of inspirator was introduced.A feasible process plan was determined and the integral piercing blanking bending forming die was designed.

介绍呼吸器挡板零件工艺特点,确定合理的工艺方案,设计1副落料、冲孔、压弯三道工序一次成形的模具。

According to the concept of context process problem space,. the concept of Directed Assembly Relationship Graph(DARG) was put forward. The isomorph of DARG was defined.

根据上下文工艺问题空间的概念,提出有向装配关系图的概念,定义有向装配关系图同构,以有向装配关系图和零件通用属性来构建实例库。

The goal of the mesh optimization algorithm is to re duce the number of the triangles in the mesh,and keep the accuracy of the interp olation at the same time.

反求工程中曲面反求得到的数据模型虽然可以正确反映零件的拓扑结构，但网格上的三角形的数一般比较大。

These parts are fully interchangeable with those in other machines.

这些零件完全可以同其他机器的零件相互替换。

Each component is carefully checked before assembly.

每个零件在装配前都经过仔细检查。

Pinouts for most components easily available through the web.

在网上大多数零件的针脚都能查得到。

He was dismissed for stealing bicycle parts.

他因偷窃自行零件而被解雇。

This refrigerator is fabricated from parts made in different factories.

这台电冰箱是由不同的工厂所制的零件组装的。

The accident has been assigned to a faulty part in the engine of the bus.

那是因为汽发机中有一个有毛病的零件。

Replacin oil quenching process with austemper process, bend intension of part and stability in using are advanced.

针对具体零件,应用等温淬工艺代替油冷淬工艺,提高零件的屈服强度,使零件在使用过程中的稳定性得到提高。

The bicycle is good in parts.

这自行有些零件是好的。

The warranty covers all power-train components.

保修单包括电的所有零件。

Mouser Electronics stocks suitable parts if you substitute a pair of 0.47uF caps for the 1uF electrolytics.

电影帽子实在有点大,但有空间,如果你把一些工作,为寻求微型零件.

The process calculations such as layout chart of punching die for locatized plate, punching pressure, pressural center and etc.

分析接线片的结构特点和冲压工艺性,介绍零件的排样设计方案、模具结构及主要特点。

The optimeter is widely used to precisely measure external size ofworkpiece by comparison with a gauge block or standard part.

本仪器是一种采用量块或标准零件与试件相比较的方式测量物体外形尺寸的仪器。

The conception model, assembly model and parts model of pneumatic hole impinger are established by the method of intelligent modeling.

采用智能产品建模的方法,建立气潜孔冲击器的概念模型、装配模型和零件模型。

Then after thick, the essence two axle diameter localization drills the thread, the keyseat and the mill crank end surface.

机械加工工艺是规定产品或零件机械加工工艺过程和操作方法，是指导生产的重要的技术性文件。

Thus under the condition of without component as sembling diagram, solve the problem of assembling projectile weaving machine with knock-down parts.

从而解决在没有零件装配图的情况下，装配散件片梭织机的问题。

But in the couse of lathing and dawdling,the trouble of deformation,empyrosis and crack lf parts often appears which affects seriously the processing quality.

但在磨削过程中,易出现变形、烧伤及裂纹等问题,影响零件的加工质量。

The technique character of the baffle of inspirator was introduced.A feasible process plan was determined and the integral piercing blanking bending forming die was designed.

介绍呼吸器挡板零件工艺特点,确定合理的工艺方案,设计1副落料、冲孔、压弯三道工序一成形的模具。

According to the concept of context process problem space,. the concept of Directed Assembly Relationship Graph(DARG) was put forward. The isomorph of DARG was defined.

根据上下文工艺问题空间的概念,提出有向装配关系图的概念,定义有向装配关系图同构,以有向装配关系图和零件通用属性来构建实例库。

The goal of the mesh optimization algorithm is to re duce the number of the triangles in the mesh,and keep the accuracy of the interp olation at the same time.

反求工程中曲面反求得到的数据模型虽然可以正确反映零件的拓扑结构，但网格上的三角形的数量一般比较大。