Let's get the lathe to turn the new piston.

咱们用车床车[加工]新的活塞吧。

From the garage there came the sound of Derek working a lathe.

汽车修理厂那德里克开动车床的声音。

They showed keen interest in the various lathes on exhibition.

他们对展出中的各类车床表现出了浓厚的兴趣。

This series machine is single column vertical lathe, it has a railhead and a sidehead.

本系列单柱立式车床，有一个立刀架和一个侧刀架。

C7620-11 semi-automatic chuck multicut lathe was reformed into a kind of simple constructed NC machine,so that the variety of process was increased ,and automation degree was also improved.

通对C7620-11夹盘多刀半自动车床的改进,扩大了加工种类,提高了自动化程度,使其成为一台简易型数控车床。

In this paper,the cam explorator in contour lathe is designed direct according to the contour of primary products with the mathematical analogue of the working course of the cam。

通对凸轮加工程的数，利用原始产品凸轮外形直接设计凸轮仿形车床的靠。

In order to prevent the reduction of the working accuracy of S1-280 Type Lathe that is made from overwear of main shaft bush bearing, it is substituted with rolling bearing.

原车床主轴支撑滑动轴承轴瓦严重磨损,加工精度降低,故改用滚动轴承支撑。

Abstract: C7620-11 semi-automatic chuck multicut lathe was reformed into a kind of simple constructed NC machine, so that the variety of process was increased ,and automation degree was also improved.

摘 要: 通对C7620-11夹盘多刀半自动车床的改进，扩大了加工种类，提高了自动化程度，使其成为一台简易型数控车床。

Let's get the lathe to turn the new piston.

咱们用床[加工]新的活塞吧。

From the garage there came the sound of Derek working a lathe.

汽修理厂那边传来德里克开动床的声音。

They showed keen interest in the various lathes on exhibition.

他们中的各类床表现了浓厚的兴趣。

This series machine is single column vertical lathe, it has a railhead and a sidehead.

本系列单柱立式床，有一个立刀架和一个侧刀架。

C7620-11 semi-automatic chuck multicut lathe was reformed into a kind of simple constructed NC machine,so that the variety of process was increased ,and automation degree was also improved.

通C7620-11夹盘多刀半自动床的改进,扩大了加工种类,提高了自动化程度,使其成为一台简易型床。

In this paper,the cam explorator in contour lathe is designed direct according to the contour of primary products with the mathematical analogue of the working course of the cam。

通凸轮加工程的学模拟，利用原始产品凸轮外形来直接设计凸轮仿形床的靠模。

In order to prevent the reduction of the working accuracy of S1-280 Type Lathe that is made from overwear of main shaft bush bearing, it is substituted with rolling bearing.

原床主轴支撑滑动轴承轴瓦严重磨损,加工精度降低,故改用滚动轴承支撑。

Abstract: C7620-11 semi-automatic chuck multicut lathe was reformed into a kind of simple constructed NC machine, so that the variety of process was increased ,and automation degree was also improved.

摘 要: 通C7620-11夹盘多刀半自动床的改进，扩大了加工种类，提高了自动化程度，使其成为一台简易型床。

Let's get the lathe to turn the new piston.

咱们车床车[加工]新的活塞吧。

From the garage there came the sound of Derek working a lathe.

汽车那边传来德里克开动车床的声音。

They showed keen interest in the various lathes on exhibition.

他们对展出中的各类车床表现出了浓厚的兴趣。

This series machine is single column vertical lathe, it has a railhead and a sidehead.

本系列单柱立式车床，有一个立刀架和一个侧刀架。

C7620-11 semi-automatic chuck multicut lathe was reformed into a kind of simple constructed NC machine,so that the variety of process was increased ,and automation degree was also improved.

通对C7620-11夹盘多刀半自动车床的改进,扩大了加工种类,提高了自动化程度,使其成为一台简易型数控车床。

In this paper,the cam explorator in contour lathe is designed direct according to the contour of primary products with the mathematical analogue of the working course of the cam。

通对凸轮加工程的数学模拟，利产品凸轮外形来直接设计凸轮仿形车床的靠模。

In order to prevent the reduction of the working accuracy of S1-280 Type Lathe that is made from overwear of main shaft bush bearing, it is substituted with rolling bearing.

车床主轴支撑滑动轴承轴瓦严重磨损,加工精度降低,故改滚动轴承支撑。

Abstract: C7620-11 semi-automatic chuck multicut lathe was reformed into a kind of simple constructed NC machine, so that the variety of process was increased ,and automation degree was also improved.

摘 要: 通对C7620-11夹盘多刀半自动车床的改进，扩大了加工种类，提高了自动化程度，使其成为一台简易型数控车床。

Let's get the lathe to turn the new piston.

咱们用车床车[加工]新的活。

From the garage there came the sound of Derek working a lathe.

车修理厂那边传来德里克开动车床的声音。

They showed keen interest in the various lathes on exhibition.

他们对展出中的各类车床表现出了浓厚的兴趣。

This series machine is single column vertical lathe, it has a railhead and a sidehead.

本系列单柱立式车床，有一个立刀架和一个侧刀架。

C7620-11 semi-automatic chuck multicut lathe was reformed into a kind of simple constructed NC machine,so that the variety of process was increased ,and automation degree was also improved.

通对C7620-11夹盘多刀半自动车床的改进,扩大了加工种类,提高了自动化程度,使其成为一台简易型数控车床。

In this paper,the cam explorator in contour lathe is designed direct according to the contour of primary products with the mathematical analogue of the working course of the cam。

通对加工程的数学模拟，利用原始产外形来直接设计仿形车床的靠模。

In order to prevent the reduction of the working accuracy of S1-280 Type Lathe that is made from overwear of main shaft bush bearing, it is substituted with rolling bearing.

原车床主轴支撑滑动轴承轴瓦严重磨损,加工精度降低,故改用滚动轴承支撑。

Abstract: C7620-11 semi-automatic chuck multicut lathe was reformed into a kind of simple constructed NC machine, so that the variety of process was increased ,and automation degree was also improved.

摘 要: 通对C7620-11夹盘多刀半自动车床的改进，扩大了加工种类，提高了自动化程度，使其成为一台简易型数控车床。

Let's get the lathe to turn the new piston.

咱们用[加工]新的活塞吧。

From the garage there came the sound of Derek working a lathe.

汽修理厂那边传来德里克开动的声音。

They showed keen interest in the various lathes on exhibition.

他们对展出中的各类表现出了浓厚的兴趣。

This series machine is single column vertical lathe, it has a railhead and a sidehead.

本系列单柱立式，有一个立刀架和一个侧刀架。

C7620-11 semi-automatic chuck multicut lathe was reformed into a kind of simple constructed NC machine,so that the variety of process was increased ,and automation degree was also improved.

通对C7620-11夹盘多刀半自动的改进,扩大了加工种类,提高了自动化程度,使其成为一台简易型数控。

In this paper,the cam explorator in contour lathe is designed direct according to the contour of primary products with the mathematical analogue of the working course of the cam。

通对凸轮加工程的数学模拟，利用原始产品凸轮外形来直接设计凸轮仿形的靠模。

In order to prevent the reduction of the working accuracy of S1-280 Type Lathe that is made from overwear of main shaft bush bearing, it is substituted with rolling bearing.

原轴支撑滑动轴承轴瓦严重磨损,加工精度降低,故改用滚动轴承支撑。

Abstract: C7620-11 semi-automatic chuck multicut lathe was reformed into a kind of simple constructed NC machine, so that the variety of process was increased ,and automation degree was also improved.

摘 要: 通对C7620-11夹盘多刀半自动的改进，扩大了加工种类，提高了自动化程度，使其成为一台简易型数控。

Let's get the lathe to turn the new piston.

咱们用车床车[加工]新的活塞吧。

From the garage there came the sound of Derek working a lathe.

汽车修理厂那边传来德里克开动车床的声音。

They showed keen interest in the various lathes on exhibition.

他们对展出中的各类车床表现出了浓厚的兴趣。

This series machine is single column vertical lathe, it has a railhead and a sidehead.

本系列单柱立式车床，有一个立刀架和一个侧刀架。

C7620-11 semi-automatic chuck multicut lathe was reformed into a kind of simple constructed NC machine,so that the variety of process was increased ,and automation degree was also improved.

通对C7620-11夹盘多刀半自动车床的改进,扩大了加工种类,提高了自动化程度,使其成为一台简易型数控车床。

In this paper,the cam explorator in contour lathe is designed direct according to the contour of primary products with the mathematical analogue of the working course of the cam。

通对凸轮加工程的数学模拟，利用原始产品凸轮外形来直接设计凸轮仿形车床的靠模。

In order to prevent the reduction of the working accuracy of S1-280 Type Lathe that is made from overwear of main shaft bush bearing, it is substituted with rolling bearing.

原车床主滑动承瓦严重磨损,加工精度降低,故改用滚动承。

Abstract: C7620-11 semi-automatic chuck multicut lathe was reformed into a kind of simple constructed NC machine, so that the variety of process was increased ,and automation degree was also improved.

摘 要: 通对C7620-11夹盘多刀半自动车床的改进，扩大了加工种类，提高了自动化程度，使其成为一台简易型数控车床。

Let's get the lathe to turn the new piston.

咱们用[加工]新的活塞吧。

From the garage there came the sound of Derek working a lathe.

汽修理厂那边传来德里克开动的声音。

They showed keen interest in the various lathes on exhibition.

他们对展出中的各类表现出了浓厚的兴趣。

This series machine is single column vertical lathe, it has a railhead and a sidehead.

本系列单柱立式，有一个立刀架和一个侧刀架。

C7620-11 semi-automatic chuck multicut lathe was reformed into a kind of simple constructed NC machine,so that the variety of process was increased ,and automation degree was also improved.

通对C7620-11夹盘多刀半自动的改进,扩大了加工种类,提高了自动化程度,使其成为一台简易型数控。

In this paper,the cam explorator in contour lathe is designed direct according to the contour of primary products with the mathematical analogue of the working course of the cam。

通对凸轮加工程的数学模拟，利用始产品凸轮外形来直接设计凸轮仿形的靠模。

In order to prevent the reduction of the working accuracy of S1-280 Type Lathe that is made from overwear of main shaft bush bearing, it is substituted with rolling bearing.

主轴支撑滑动轴承轴瓦严重磨损,加工精度降低,故改用滚动轴承支撑。

Abstract: C7620-11 semi-automatic chuck multicut lathe was reformed into a kind of simple constructed NC machine, so that the variety of process was increased ,and automation degree was also improved.

摘 要: 通对C7620-11夹盘多刀半自动的改进，扩大了加工种类，提高了自动化程度，使其成为一台简易型数控。

Let's get the lathe to turn the new piston.

咱们用床[加工]新的活塞吧。

From the garage there came the sound of Derek working a lathe.

汽修理厂那边传来德里克开动床的声音。

They showed keen interest in the various lathes on exhibition.

他们中的各类床表现了浓厚的兴趣。

This series machine is single column vertical lathe, it has a railhead and a sidehead.

本系列单柱立式床，有一个立刀架和一个侧刀架。

C7620-11 semi-automatic chuck multicut lathe was reformed into a kind of simple constructed NC machine,so that the variety of process was increased ,and automation degree was also improved.

通C7620-11夹盘多刀半自动床的改进,扩大了加工种类,提高了自动化程度,使其成为一台简易型床。

In this paper,the cam explorator in contour lathe is designed direct according to the contour of primary products with the mathematical analogue of the working course of the cam。

通凸轮加工程的学模拟，利用原始产品凸轮外形来直接设计凸轮仿形床的靠模。

In order to prevent the reduction of the working accuracy of S1-280 Type Lathe that is made from overwear of main shaft bush bearing, it is substituted with rolling bearing.

原床主轴支撑滑动轴承轴瓦严重磨损,加工精度降低,故改用滚动轴承支撑。

Abstract: C7620-11 semi-automatic chuck multicut lathe was reformed into a kind of simple constructed NC machine, so that the variety of process was increased ,and automation degree was also improved.

摘 要: 通C7620-11夹盘多刀半自动床的改进，扩大了加工种类，提高了自动化程度，使其成为一台简易型床。

Let's get the lathe to turn the new piston.

咱们用[加工]新的活塞吧。

From the garage there came the sound of Derek working a lathe.

汽修理厂那边传来德里克开动的声音。

They showed keen interest in the various lathes on exhibition.

他们对展出中的各类表现出了浓厚的兴趣。

This series machine is single column vertical lathe, it has a railhead and a sidehead.

本系列单柱立式，有一个立刀架和一个侧刀架。

C7620-11 semi-automatic chuck multicut lathe was reformed into a kind of simple constructed NC machine,so that the variety of process was increased ,and automation degree was also improved.

通对C7620-11夹盘多刀半自动的改,了加工种类,提高了自动化程度,使其成为一台简易型数控。

In this paper,the cam explorator in contour lathe is designed direct according to the contour of primary products with the mathematical analogue of the working course of the cam。

通对凸轮加工程的数学模拟，利用原始产品凸轮外形来直接设计凸轮仿形的靠模。

In order to prevent the reduction of the working accuracy of S1-280 Type Lathe that is made from overwear of main shaft bush bearing, it is substituted with rolling bearing.

原主轴支撑滑动轴承轴瓦严重磨损,加工精度降低,故改用滚动轴承支撑。

Abstract: C7620-11 semi-automatic chuck multicut lathe was reformed into a kind of simple constructed NC machine, so that the variety of process was increased ,and automation degree was also improved.

摘 要: 通对C7620-11夹盘多刀半自动的改，了加工种类，提高了自动化程度，使其成为一台简易型数控。