The edge must be machined down to 0.02 millimetres.

这边缘必须切割到0.02毫米的精确度。

This machine is fully automatism number controlled, its operation is handy, andits cutting is exact.

本机全自动数字控，简便，切割精确。

Beancurd is sectile.

豆腐可以切割的。

Objective To explore the effect of One-stage Repair of Incised Wound in Palmaris with microsurgery Technique.

目的探讨腕部切割伤Ⅰ期显微外科修复手术治疗的疗效。

The potential applications of the clypeus in bionic cutting resistance reduction were analyzed.

最后分析了臭蜣螂唇基潜在的仿生应用，其天然优化的形状和切割角的自动调节可指导地面机械的仿生设计。

Principle of original horizontality, principle of superposition, principle of lateral continuity, principle of crosscutting relationship and unconformity.

原始地层水平律、叠置律水平连续律、切割律、不整合。

PROF.: The word “atom” is derived from the Greek word meaning “uncuttable.” 2

“原子”一词来自希腊文,意思”不能切割”.

Preflushing machine,the related auxiliary device of fretsaw,is applied to the preflushing for stripping after cutting silicon chip.

本设备线锯配套辅助设备，用于硅片切割后脱胶预冲洗用。

The machine has double revolving table cutterbar, pneumatic compact, high precision of process and saw cutting at the same time.

转台切割机，气动压紧，锯头同时切割，加工精度高。

Those dedicated to the path of mapmaking know that there is no other purpose for their life expression upon Earth.

那些奉献在地图切割道路上的人们知道他们在地球上的生命表达没有其它目的。

The application and maintenance of single phase input converter DV700T1500 produced by Panasonic in improving multitool dicing machine are described.

主要介绍松下公司生产的DV700T1500型单相输入的变频器在多刀切割机改进中的应用及其维护保养措施。

Studies were made on the vegetative propagation coefficient and cormel's biological characters using eighth-excision in different development phase of Lycoris radiate.

摘要在红花石蒜不同生长发育期进行八分法切割繁殖，研究无性繁殖系数和子球生物学性状差异性。

"The simplest stonework is rubBle, roughly Broken stones Bound in mortar. Ashlar work consists of regularly cut Blocks with squared edges."

最简单的石料加工粗石,在研磨机中粗略地破碎的石头。方石加工整齐地切割出具方形边缘之石块所组成。

Conclusion:Uncovery method under nasal endoscope was an effective simple operation to treat Cysts in Nasal Vestibule,and with the advantages such a...

鼻内镜下辅以鼻窦电动切割器行鼻前庭囊肿揭盖术,具有手术精确、时间短、创伤小、愈合快等微创手术优点,值得推广。

In this paper, we used 20 high-quality carburet structure steed, recommended the experiment on abrasive water jet metal-cutting and others affecting metallurgic structure.

本文以20＃优质碳素结构钢为试件，介绍了磨料水射流切割与其它方法切割对金相组织影响的试验。

When cutting most pleochroic gemstones (Iolite, Tanzanite, Kunzite etc.), lapidaries typically try to minimize the pleochroism and maximize the single most prominent color.

在切割大多数的多向色性类宝石时（如堇青石、坦桑宝石、紫锂辉石等），通常宝石匠会尽量缩小多向色性并最大化地将某一主色凸显出来。

Packng tools, Packing cutter, Gasket cutter, SWG winding machine, bending machine, Groover, Angling machine, Double jacketed machine, Gasket cutting machine, Puncher, Calender, Braider and so on.

密封机械 ：盘根工具，盘根切割工具，垫片切割工具，缠绕机，盘环机，铣槽机，倒角机，包覆机，翦机，点焊机，冲齿机，辊压机，盘根编织机。

Since the method causes serious depletion of ore during mining of upper plate,the inclined cutting raise heading together with inclined medium or deep hole kerve is suggested.

以无底柱为代表的崩落采矿法中,切割拉槽至关重要,而目前无底柱采矿大多采用垂直切割天井与切割平巷并配以中深孔联合拉槽的切割方法,但该方法在对矿体上盘回采过程中损失贫化较大。

Objective The aim of this study was to compare the effectiveness of dynamical system cutterbar via nasal endoscope for adenoidectomy by mouth and rout curettage of adenoids.

目的比较鼻内镜下经口动力系统切割器行腺样体切除术与常规腺样体刮除术的疗效。

It includes the division of dissolving area, the redetermination of its length and width,downhill layout of dissolving area a nd improvement of drilling tunnel and cutting grooves.

包括溶区的划分,溶区长、宽的重新确定;溶区间的下山布置,以及打眼巷、切割槽的改进等。

The edge must be machined down to 0.02 millimetres.

这边缘必须切割到0.02毫米的精确度。

This machine is fully automatism number controlled, its operation is handy, andits cutting is exact.

本机全自动数字控制，操作简便，切割精确。

Beancurd is sectile.

豆腐是可以切割的。

Objective To explore the effect of One-stage Repair of Incised Wound in Palmaris with microsurgery Technique.

目的探讨腕部切割Ⅰ微外科修复手术治疗的疗效。

The potential applications of the clypeus in bionic cutting resistance reduction were analyzed.

最后分析了臭蜣螂唇基潜在的仿生应用，其天然优化的形状和切割角的自动调节可指导地面机械的仿生设计。

Principle of original horizontality, principle of superposition, principle of lateral continuity, principle of crosscutting relationship and unconformity.

原始地层水平律、叠置律水平连续律、切割律、不整合。

PROF.: The word “atom” is derived from the Greek word meaning “uncuttable.” 2

“原子”一词是来自希腊文,意思是”不能切割”.

Preflushing machine,the related auxiliary device of fretsaw,is applied to the preflushing for stripping after cutting silicon chip.

本设备是线锯配套辅助设备，用于硅片切割后脱胶预冲洗用。

The machine has double revolving table cutterbar, pneumatic compact, high precision of process and saw cutting at the same time.

转台切割机，气动压紧，锯头同时切割，工精度高。

Those dedicated to the path of mapmaking know that there is no other purpose for their life expression upon Earth.

那些奉献在地图切割道路上的人们知道他们在地球上的生命表达没有其它目的。

The application and maintenance of single phase input converter DV700T1500 produced by Panasonic in improving multitool dicing machine are described.

主要介绍松下公司生产的DV700T1500型单相输入的变频器在多刀切割机改进中的应用及其维护保养措施。

Studies were made on the vegetative propagation coefficient and cormel's biological characters using eighth-excision in different development phase of Lycoris radiate.

摘要在红花蒜不同生长发育进行八分法切割繁殖，研究无性繁殖系数和子球生物学性状差异性。

"The simplest stonework is rubBle, roughly Broken stones Bound in mortar. Ashlar work consists of regularly cut Blocks with squared edges."

最简单的工品是粗,在研磨机中粗略地破碎的头。方工品是由整齐地切割出具方形边缘之块所组成。

Conclusion:Uncovery method under nasal endoscope was an effective simple operation to treat Cysts in Nasal Vestibule,and with the advantages such a...

鼻内镜下辅以鼻窦电动切割器行鼻前庭囊肿揭盖术,具有手术精确、时间短、创小、愈合快等微创手术优点,值得推广。

In this paper, we used 20 high-quality carburet structure steed, recommended the experiment on abrasive water jet metal-cutting and others affecting metallurgic structure.

本文以20＃优质碳素结构钢为试件，介绍了磨水射流切割与其它方法切割对金相组织影响的试验。

When cutting most pleochroic gemstones (Iolite, Tanzanite, Kunzite etc.), lapidaries typically try to minimize the pleochroism and maximize the single most prominent color.

在切割大多数的多向色性类宝时（如堇青、坦桑宝、紫锂辉等），通常宝匠会尽量缩小多向色性并最大化地将某一主色凸出来。

Packng tools, Packing cutter, Gasket cutter, SWG winding machine, bending machine, Groover, Angling machine, Double jacketed machine, Gasket cutting machine, Puncher, Calender, Braider and so on.

密封机械 ：盘根工具，盘根切割工具，垫片切割工具，缠绕机，盘环机，铣槽机，倒角机，包覆机，翦机，点焊机，冲齿机，辊压机，盘根编织机。

Since the method causes serious depletion of ore during mining of upper plate,the inclined cutting raise heading together with inclined medium or deep hole kerve is suggested.

以无底柱为代表的崩落采矿法中,切割拉槽至关重要,而目前无底柱采矿大多采用垂直切割天井与切割平巷并配以中深孔联合拉槽的切割方法,但该方法在对矿体上盘回采过程中损失贫化较大。

Objective The aim of this study was to compare the effectiveness of dynamical system cutterbar via nasal endoscope for adenoidectomy by mouth and rout curettage of adenoids.

目的比较鼻内镜下经口动力系统切割器行腺样体切除术与常规腺样体刮除术的疗效。

It includes the division of dissolving area, the redetermination of its length and width,downhill layout of dissolving area a nd improvement of drilling tunnel and cutting grooves.

包括溶区的划分,溶区长、宽的重新确定;溶区间的下山布置,以及打眼巷、切割槽的改进等。

The edge must be machined down to 0.02 millimetres.

这边缘必须切割到0.02毫米的精确度。

This machine is fully automatism number controlled, its operation is handy, andits cutting is exact.

自动数字控制，操作简便，切割精确。

Beancurd is sectile.

豆腐是可以切割的。

Objective To explore the effect of One-stage Repair of Incised Wound in Palmaris with microsurgery Technique.

目的探讨腕部切割伤Ⅰ期显微外科修复手术治疗的疗效。

The potential applications of the clypeus in bionic cutting resistance reduction were analyzed.

最后分析了臭蜣螂唇基潜在的仿生应用，其天然优化的形状和切割角的自动调节可指导地面械的仿生设计。

Principle of original horizontality, principle of superposition, principle of lateral continuity, principle of crosscutting relationship and unconformity.

原始地层水平律、叠置律水平连续律、切割律、不整合。

PROF.: The word “atom” is derived from the Greek word meaning “uncuttable.” 2

“原子”一词是来自希腊文,意思是”不能切割”.

Preflushing machine,the related auxiliary device of fretsaw,is applied to the preflushing for stripping after cutting silicon chip.

设备是线锯配套辅助设备，用于硅片切割后脱胶预冲洗用。

The machine has double revolving table cutterbar, pneumatic compact, high precision of process and saw cutting at the same time.

转台切割，气动压紧，锯头同时切割，加工精度高。

Those dedicated to the path of mapmaking know that there is no other purpose for their life expression upon Earth.

那些奉献在地图切割道路上的人们知道他们在地球上的生命表达没有其它目的。

The application and maintenance of single phase input converter DV700T1500 produced by Panasonic in improving multitool dicing machine are described.

主要介绍松下公司生产的DV700T1500型单相输入的变频器在多刀切割改进中的应用及其维护保养措施。

Studies were made on the vegetative propagation coefficient and cormel's biological characters using eighth-excision in different development phase of Lycoris radiate.

摘要在红花石蒜不同生长发育期进行八分法切割繁殖，研究无性繁殖系数和子球生物学性状差异性。

"The simplest stonework is rubBle, roughly Broken stones Bound in mortar. Ashlar work consists of regularly cut Blocks with squared edges."

最简单的石料加工品是粗石,在研磨中粗略地破碎的石头。石加工品是由整齐地切割形边缘之石块所组成。

Conclusion:Uncovery method under nasal endoscope was an effective simple operation to treat Cysts in Nasal Vestibule,and with the advantages such a...

鼻内镜下辅以鼻窦电动切割器行鼻前庭囊肿揭盖术,有手术精确、时间短、创伤小、愈合快等微创手术优点,值得推广。

In this paper, we used 20 high-quality carburet structure steed, recommended the experiment on abrasive water jet metal-cutting and others affecting metallurgic structure.

文以20＃优质碳素结构钢为试件，介绍了磨料水射流切割与其它法切割对金相组织影响的试验。

When cutting most pleochroic gemstones (Iolite, Tanzanite, Kunzite etc.), lapidaries typically try to minimize the pleochroism and maximize the single most prominent color.

在切割大多数的多向色性类宝石时（如堇青石、坦桑宝石、紫锂辉石等），通常宝石匠会尽量缩小多向色性并最大化地将某一主色凸显来。

Packng tools, Packing cutter, Gasket cutter, SWG winding machine, bending machine, Groover, Angling machine, Double jacketed machine, Gasket cutting machine, Puncher, Calender, Braider and so on.

密封械 ：盘根工，盘根切割工，垫片切割工，缠绕，盘环，铣槽，倒角，包覆，翦，点焊，冲齿，辊压，盘根编织。

Since the method causes serious depletion of ore during mining of upper plate,the inclined cutting raise heading together with inclined medium or deep hole kerve is suggested.

以无底柱为代表的崩落采矿法中,切割拉槽至关重要,而目前无底柱采矿大多采用垂直切割天井与切割平巷并配以中深孔联合拉槽的切割法,但该法在对矿体上盘回采过程中损失贫化较大。

Objective The aim of this study was to compare the effectiveness of dynamical system cutterbar via nasal endoscope for adenoidectomy by mouth and rout curettage of adenoids.

目的比较鼻内镜下经口动力系统切割器行腺样体切除术与常规腺样体刮除术的疗效。

It includes the division of dissolving area, the redetermination of its length and width,downhill layout of dissolving area a nd improvement of drilling tunnel and cutting grooves.

包括溶区的划分,溶区长、宽的重新确定;溶区间的下山布置,以及打眼巷、切割槽的改进等。

The edge must be machined down to 0.02 millimetres.

这边缘必须割到0.02毫米的精确度。

This machine is fully automatism number controlled, its operation is handy, andits cutting is exact.

本机全自动数字控制，操作，割精确。

Beancurd is sectile.

豆腐是可以割的。

Objective To explore the effect of One-stage Repair of Incised Wound in Palmaris with microsurgery Technique.

目的探讨腕部割伤Ⅰ期显微外科修复手术治疗的疗效。

The potential applications of the clypeus in bionic cutting resistance reduction were analyzed.

最后分析了臭蜣螂唇基潜在的仿生应用，其天然优化的形状和割角的自动调节可指导地面机械的仿生设计。

Principle of original horizontality, principle of superposition, principle of lateral continuity, principle of crosscutting relationship and unconformity.

原始地层水平律、叠置律水平连续律、割律、不整合。

PROF.: The word “atom” is derived from the Greek word meaning “uncuttable.” 2

“原子”一词是来自希腊文,意思是”不能割”.

Preflushing machine,the related auxiliary device of fretsaw,is applied to the preflushing for stripping after cutting silicon chip.

本设备是线锯配套辅助设备，用于硅片割后脱胶预冲洗用。

The machine has double revolving table cutterbar, pneumatic compact, high precision of process and saw cutting at the same time.

转台割机，气动压紧，锯头同时割，精度高。

Those dedicated to the path of mapmaking know that there is no other purpose for their life expression upon Earth.

那些奉献在地图割道路上的人们知道他们在地球上的生命表达没有其它目的。

The application and maintenance of single phase input converter DV700T1500 produced by Panasonic in improving multitool dicing machine are described.

主要介绍松下公司生产的DV700T1500型单相输入的变频器在多刀割机改进中的应用及其维护保养措施。

Studies were made on the vegetative propagation coefficient and cormel's biological characters using eighth-excision in different development phase of Lycoris radiate.

摘要在红花蒜不同生长发育期进行八分法割繁殖，研究无性繁殖系数和子球生物学性状差异性。

"The simplest stonework is rubBle, roughly Broken stones Bound in mortar. Ashlar work consists of regularly cut Blocks with squared edges."

最单的料品是粗,在研磨机中粗略地破碎的头。方品是由整齐地割出具方形边缘之块所组成。

Conclusion:Uncovery method under nasal endoscope was an effective simple operation to treat Cysts in Nasal Vestibule,and with the advantages such a...

鼻内镜下辅以鼻窦电动割器行鼻前庭囊肿揭盖术,具有手术精确、时间短、创伤小、愈合快等微创手术优点,值得推广。

In this paper, we used 20 high-quality carburet structure steed, recommended the experiment on abrasive water jet metal-cutting and others affecting metallurgic structure.

本文以20＃优质碳素结构钢为试件，介绍了磨料水射流割与其它方法割对金相组织影响的试验。

When cutting most pleochroic gemstones (Iolite, Tanzanite, Kunzite etc.), lapidaries typically try to minimize the pleochroism and maximize the single most prominent color.

在割大多数的多向色性类宝时（如堇青、坦桑宝、紫锂辉等），通常宝匠会尽量缩小多向色性并最大化地将某一主色凸显出来。

Packng tools, Packing cutter, Gasket cutter, SWG winding machine, bending machine, Groover, Angling machine, Double jacketed machine, Gasket cutting machine, Puncher, Calender, Braider and so on.

密封机械 ：盘根具，盘根割具，垫片割具，缠绕机，盘环机，铣槽机，倒角机，包覆机，翦机，点焊机，冲齿机，辊压机，盘根编织机。

Since the method causes serious depletion of ore during mining of upper plate,the inclined cutting raise heading together with inclined medium or deep hole kerve is suggested.

以无底柱为代表的崩落采矿法中,割拉槽至关重要,而目前无底柱采矿大多采用垂直割天井与割平巷并配以中深孔联合拉槽的割方法,但该方法在对矿体上盘回采过程中损失贫化较大。

Objective The aim of this study was to compare the effectiveness of dynamical system cutterbar via nasal endoscope for adenoidectomy by mouth and rout curettage of adenoids.

目的比较鼻内镜下经口动力系统割器行腺样体除术与常规腺样体刮除术的疗效。

It includes the division of dissolving area, the redetermination of its length and width,downhill layout of dissolving area a nd improvement of drilling tunnel and cutting grooves.

包括溶区的划分,溶区长、宽的重新确定;溶区间的下山布置,以及打眼巷、割槽的改进等。

The edge must be machined down to 0.02 millimetres.

这边缘必须切割到0.02毫米的精确度。

This machine is fully automatism number controlled, its operation is handy, andits cutting is exact.

本机全自动数字控制，操作简便，切割精确。

Beancurd is sectile.

豆腐是可以切割的。

Objective To explore the effect of One-stage Repair of Incised Wound in Palmaris with microsurgery Technique.

目的探讨腕部切割伤Ⅰ期显微外科修手治疗的疗效。

The potential applications of the clypeus in bionic cutting resistance reduction were analyzed.

最后分析了臭蜣螂唇基潜在的仿生应用，其天然优化的形状和切割角的自动调节可指导地面机械的仿生设计。

Principle of original horizontality, principle of superposition, principle of lateral continuity, principle of crosscutting relationship and unconformity.

原始地层水平律、叠置律水平连续律、切割律、不整合。

PROF.: The word “atom” is derived from the Greek word meaning “uncuttable.” 2

“原子”一词是来自希腊文,意思是”不能切割”.

Preflushing machine,the related auxiliary device of fretsaw,is applied to the preflushing for stripping after cutting silicon chip.

本设备是线锯配套辅助设备，用于硅片切割后脱胶预冲洗用。

The machine has double revolving table cutterbar, pneumatic compact, high precision of process and saw cutting at the same time.

转台切割机，气动压紧，锯头同时切割，加工精度高。

Those dedicated to the path of mapmaking know that there is no other purpose for their life expression upon Earth.

那些奉献在地图切割道路上的人们知道他们在地球上的生命表达没有其它目的。

The application and maintenance of single phase input converter DV700T1500 produced by Panasonic in improving multitool dicing machine are described.

主要介绍松下公司生产的DV700T1500型单相输入的变频器在多刀切割机改进中的应用及其维护保养措施。

Studies were made on the vegetative propagation coefficient and cormel's biological characters using eighth-excision in different development phase of Lycoris radiate.

摘要在红花石蒜不同生长发育期进行八分法切割繁殖，研究无繁殖系数和子球生物学状。

"The simplest stonework is rubBle, roughly Broken stones Bound in mortar. Ashlar work consists of regularly cut Blocks with squared edges."

最简单的石料加工品是粗石,在研磨机中粗略地破碎的石头。方石加工品是由整齐地切割出具方形边缘之石块所组成。

Conclusion:Uncovery method under nasal endoscope was an effective simple operation to treat Cysts in Nasal Vestibule,and with the advantages such a...

鼻内镜下辅以鼻窦电动切割器行鼻前庭囊肿揭盖,具有手精确、时间短、创伤小、愈合快等微创手优点,值得推广。

In this paper, we used 20 high-quality carburet structure steed, recommended the experiment on abrasive water jet metal-cutting and others affecting metallurgic structure.

本文以20＃优质碳素结构钢为试件，介绍了磨料水射流切割与其它方法切割对金相组织影响的试验。

When cutting most pleochroic gemstones (Iolite, Tanzanite, Kunzite etc.), lapidaries typically try to minimize the pleochroism and maximize the single most prominent color.

在切割大多数的多向色类宝石时（如堇青石、坦桑宝石、紫锂辉石等），通常宝石匠会尽量缩小多向色并最大化地将某一主色凸显出来。

Packng tools, Packing cutter, Gasket cutter, SWG winding machine, bending machine, Groover, Angling machine, Double jacketed machine, Gasket cutting machine, Puncher, Calender, Braider and so on.

密封机械 ：盘根工具，盘根切割工具，垫片切割工具，缠绕机，盘环机，铣槽机，倒角机，包覆机，翦机，点焊机，冲齿机，辊压机，盘根编织机。

Since the method causes serious depletion of ore during mining of upper plate,the inclined cutting raise heading together with inclined medium or deep hole kerve is suggested.

以无底柱为代表的崩落采矿法中,切割拉槽至关重要,而目前无底柱采矿大多采用垂直切割天井与切割平巷并配以中深孔联合拉槽的切割方法,但该方法在对矿体上盘回采过程中损失贫化较大。

Objective The aim of this study was to compare the effectiveness of dynamical system cutterbar via nasal endoscope for adenoidectomy by mouth and rout curettage of adenoids.

目的比较鼻内镜下经口动力系统切割器行腺样体切除与常规腺样体刮除的疗效。

It includes the division of dissolving area, the redetermination of its length and width,downhill layout of dissolving area a nd improvement of drilling tunnel and cutting grooves.

包括溶区的划分,溶区长、宽的重新确定;溶区间的下山布置,以及打眼巷、切割槽的改进等。

The edge must be machined down to 0.02 millimetres.

这边缘必须到0.02毫米的精确度。

This machine is fully automatism number controlled, its operation is handy, andits cutting is exact.

本机全自动数字控制，操作简便，精确。

Beancurd is sectile.

豆腐是可以的。

Objective To explore the effect of One-stage Repair of Incised Wound in Palmaris with microsurgery Technique.

目的探讨腕部伤Ⅰ期显微外科修复手术治疗的疗效。

The potential applications of the clypeus in bionic cutting resistance reduction were analyzed.

最后分析了臭蜣螂唇基潜在的仿生应用，其天然优化的形状角的自动调节可指导地面机械的仿生设计。

Principle of original horizontality, principle of superposition, principle of lateral continuity, principle of crosscutting relationship and unconformity.

原始地层水平律、叠置律水平连续律、律、整合。

PROF.: The word “atom” is derived from the Greek word meaning “uncuttable.” 2

“原子”一词是来自希腊文,意思是”能”.

Preflushing machine,the related auxiliary device of fretsaw,is applied to the preflushing for stripping after cutting silicon chip.

本设备是线锯配套辅助设备，用于硅片后脱胶预冲洗用。

The machine has double revolving table cutterbar, pneumatic compact, high precision of process and saw cutting at the same time.

转台机，气动压紧，锯头时，加工精度高。

Those dedicated to the path of mapmaking know that there is no other purpose for their life expression upon Earth.

那些奉献在地图道路上的人们知道他们在地球上的生命表达没有其它目的。

The application and maintenance of single phase input converter DV700T1500 produced by Panasonic in improving multitool dicing machine are described.

主要介绍松下公司生产的DV700T1500型单相输入的变频器在多刀机改进中的应用及其维护保养措施。

Studies were made on the vegetative propagation coefficient and cormel's biological characters using eighth-excision in different development phase of Lycoris radiate.

摘要在红花石生长发育期进行八分法繁殖，研究无性繁殖系数子球生物学性状差异性。

"The simplest stonework is rubBle, roughly Broken stones Bound in mortar. Ashlar work consists of regularly cut Blocks with squared edges."

最简单的石料加工品是粗石,在研磨机中粗略地破碎的石头。方石加工品是由整齐地出具方形边缘之石块所组成。

Conclusion:Uncovery method under nasal endoscope was an effective simple operation to treat Cysts in Nasal Vestibule,and with the advantages such a...

鼻内镜下辅以鼻窦电动器行鼻前庭囊肿揭盖术,具有手术精确、时间短、创伤小、愈合快等微创手术优点,值得推广。

In this paper, we used 20 high-quality carburet structure steed, recommended the experiment on abrasive water jet metal-cutting and others affecting metallurgic structure.

本文以20＃优质碳素结构钢为试件，介绍了磨料水射流与其它方法对金相组织影响的试验。

When cutting most pleochroic gemstones (Iolite, Tanzanite, Kunzite etc.), lapidaries typically try to minimize the pleochroism and maximize the single most prominent color.

在大多数的多向色性类宝石时（如堇青石、坦桑宝石、紫锂辉石等），通常宝石匠会尽量缩小多向色性并最大化地将某一主色凸显出来。

Packng tools, Packing cutter, Gasket cutter, SWG winding machine, bending machine, Groover, Angling machine, Double jacketed machine, Gasket cutting machine, Puncher, Calender, Braider and so on.

密封机械 ：盘根工具，盘根工具，垫片工具，缠绕机，盘环机，铣槽机，倒角机，包覆机，翦机，点焊机，冲齿机，辊压机，盘根编织机。

Since the method causes serious depletion of ore during mining of upper plate,the inclined cutting raise heading together with inclined medium or deep hole kerve is suggested.

以无底柱为代表的崩落采矿法中,拉槽至关重要,而目前无底柱采矿大多采用垂直天井与平巷并配以中深孔联合拉槽的方法,但该方法在对矿体上盘回采过程中损失贫化较大。

Objective The aim of this study was to compare the effectiveness of dynamical system cutterbar via nasal endoscope for adenoidectomy by mouth and rout curettage of adenoids.

目的比较鼻内镜下经口动力系统器行腺样体除术与常规腺样体刮除术的疗效。

It includes the division of dissolving area, the redetermination of its length and width,downhill layout of dissolving area a nd improvement of drilling tunnel and cutting grooves.

包括溶区的划分,溶区长、宽的重新确定;溶区间的下山布置,以及打眼巷、槽的改进等。

The edge must be machined down to 0.02 millimetres.

这边缘必须切割到0.02毫米的精确度。

This machine is fully automatism number controlled, its operation is handy, andits cutting is exact.

本机全自动数字控制，操作简便，切割精确。

Beancurd is sectile.

豆腐是可以切割的。

Objective To explore the effect of One-stage Repair of Incised Wound in Palmaris with microsurgery Technique.

目的探讨腕部切割伤Ⅰ期显微外科修复手术治疗的疗效。

The potential applications of the clypeus in bionic cutting resistance reduction were analyzed.

最后分析了臭蜣螂唇基潜在的仿生应用，其天然优化的形状和切割角的自动调节可指导地面机械的仿生设计。

Principle of original horizontality, principle of superposition, principle of lateral continuity, principle of crosscutting relationship and unconformity.

始地层水平律、叠置律水平连续律、切割律、不整。

PROF.: The word “atom” is derived from the Greek word meaning “uncuttable.” 2

“”一词是来自希腊文,意思是”不能切割”.

Preflushing machine,the related auxiliary device of fretsaw,is applied to the preflushing for stripping after cutting silicon chip.

本设备是线锯配套辅助设备，用于硅片切割后脱胶预冲洗用。

The machine has double revolving table cutterbar, pneumatic compact, high precision of process and saw cutting at the same time.

转台切割机，气动压紧，锯头同时切割，加工精度高。

Those dedicated to the path of mapmaking know that there is no other purpose for their life expression upon Earth.

那些奉献在地图切割道路上的人们知道他们在地球上的生命表达没有其它目的。

The application and maintenance of single phase input converter DV700T1500 produced by Panasonic in improving multitool dicing machine are described.

主要介绍松生产的DV700T1500型单相输入的变频器在多刀切割机改进中的应用及其维护保养措施。

Studies were made on the vegetative propagation coefficient and cormel's biological characters using eighth-excision in different development phase of Lycoris radiate.

摘要在红花石蒜不同生长发育期进行八分法切割繁殖，研究无性繁殖系数和球生物学性状差异性。

"The simplest stonework is rubBle, roughly Broken stones Bound in mortar. Ashlar work consists of regularly cut Blocks with squared edges."

最简单的石料加工品是粗石,在研磨机中粗略地破碎的石头。方石加工品是由整齐地切割出具方形边缘之石块所组成。

Conclusion:Uncovery method under nasal endoscope was an effective simple operation to treat Cysts in Nasal Vestibule,and with the advantages such a...

鼻内镜辅以鼻窦电动切割器行鼻前庭囊肿揭盖术,具有手术精确、时间短、创伤小、愈快等微创手术优点,值得推广。

In this paper, we used 20 high-quality carburet structure steed, recommended the experiment on abrasive water jet metal-cutting and others affecting metallurgic structure.

本文以20＃优质碳素结构钢为试件，介绍了磨料水射流切割与其它方法切割对金相组织影响的试验。

When cutting most pleochroic gemstones (Iolite, Tanzanite, Kunzite etc.), lapidaries typically try to minimize the pleochroism and maximize the single most prominent color.

在切割大多数的多向色性类宝石时（如堇青石、坦桑宝石、紫锂辉石等），通常宝石匠会尽量缩小多向色性并最大化地将某一主色凸显出来。

Packng tools, Packing cutter, Gasket cutter, SWG winding machine, bending machine, Groover, Angling machine, Double jacketed machine, Gasket cutting machine, Puncher, Calender, Braider and so on.

密封机械 ：盘根工具，盘根切割工具，垫片切割工具，缠绕机，盘环机，铣槽机，倒角机，包覆机，翦机，点焊机，冲齿机，辊压机，盘根编织机。

Since the method causes serious depletion of ore during mining of upper plate,the inclined cutting raise heading together with inclined medium or deep hole kerve is suggested.

以无底柱为代表的崩落采矿法中,切割拉槽至关重要,而目前无底柱采矿大多采用垂直切割天井与切割平巷并配以中深孔联拉槽的切割方法,但该方法在对矿体上盘回采过程中损失贫化较大。

Objective The aim of this study was to compare the effectiveness of dynamical system cutterbar via nasal endoscope for adenoidectomy by mouth and rout curettage of adenoids.

目的比较鼻内镜经口动力系统切割器行腺样体切除术与常规腺样体刮除术的疗效。

It includes the division of dissolving area, the redetermination of its length and width,downhill layout of dissolving area a nd improvement of drilling tunnel and cutting grooves.

包括溶区的划分,溶区长、宽的重新确定;溶区间的山布置,以及打眼巷、切割槽的改进等。

The edge must be machined down to 0.02 millimetres.

这边缘必须到0.02毫米的精确度。

This machine is fully automatism number controlled, its operation is handy, andits cutting is exact.

本机全自动数字控制，操作简便，精确。

Beancurd is sectile.

豆腐是可以的。

Objective To explore the effect of One-stage Repair of Incised Wound in Palmaris with microsurgery Technique.

目的探讨腕部伤Ⅰ期显微外科修复手术治疗的疗效。

The potential applications of the clypeus in bionic cutting resistance reduction were analyzed.

最后分析了臭蜣螂唇基潜在的仿生应用，其天然优化的形状和角的自动调节可指导地面机械的仿生设计。

Principle of original horizontality, principle of superposition, principle of lateral continuity, principle of crosscutting relationship and unconformity.

原始地层水平律、叠置律水平连续律、律、不整合。

PROF.: The word “atom” is derived from the Greek word meaning “uncuttable.” 2

“原子”一词是来自希腊文,意思是”不能”.

Preflushing machine,the related auxiliary device of fretsaw,is applied to the preflushing for stripping after cutting silicon chip.

本设备是线锯配套辅助设备，用于硅后脱胶预冲洗用。

The machine has double revolving table cutterbar, pneumatic compact, high precision of process and saw cutting at the same time.

转台机，气动压紧，锯头同时，加工精度高。

Those dedicated to the path of mapmaking know that there is no other purpose for their life expression upon Earth.

那些奉献在地道路上的人们知道他们在地球上的生命表达没有其它目的。

The application and maintenance of single phase input converter DV700T1500 produced by Panasonic in improving multitool dicing machine are described.

主要介绍松下公司生产的DV700T1500型单相输入的变频器在多刀机改进中的应用及其维护保养措施。

Studies were made on the vegetative propagation coefficient and cormel's biological characters using eighth-excision in different development phase of Lycoris radiate.

摘要在红花石蒜不同生长发育期进行八分法繁殖，研究无性繁殖系数和子球生物学性状差异性。

"The simplest stonework is rubBle, roughly Broken stones Bound in mortar. Ashlar work consists of regularly cut Blocks with squared edges."

最简单的石料加工品是粗石,在研磨机中粗略地破碎的石头。方石加工品是由整齐地出具方形边缘之石块所组成。

Conclusion:Uncovery method under nasal endoscope was an effective simple operation to treat Cysts in Nasal Vestibule,and with the advantages such a...

鼻内镜下辅以鼻窦电动器行鼻前庭囊肿揭盖术,具有手术精确、时间短、创伤小、愈合快等微创手术优点,值得推广。

In this paper, we used 20 high-quality carburet structure steed, recommended the experiment on abrasive water jet metal-cutting and others affecting metallurgic structure.

本文以20＃优质碳素结构钢为试件，介绍了磨料水射流与其它方法对金相组织影响的试验。

When cutting most pleochroic gemstones (Iolite, Tanzanite, Kunzite etc.), lapidaries typically try to minimize the pleochroism and maximize the single most prominent color.

在大多数的多向色性类宝石时（如堇青石、坦桑宝石、紫锂辉石等），通常宝石匠会尽量缩小多向色性并最大化地将某一主色凸显出来。

Packng tools, Packing cutter, Gasket cutter, SWG winding machine, bending machine, Groover, Angling machine, Double jacketed machine, Gasket cutting machine, Puncher, Calender, Braider and so on.

密封机械 ：盘根工具，盘根工具，垫工具，缠绕机，盘环机，铣槽机，倒角机，包覆机，翦机，点焊机，冲齿机，辊压机，盘根编织机。

Since the method causes serious depletion of ore during mining of upper plate,the inclined cutting raise heading together with inclined medium or deep hole kerve is suggested.

以无底柱为代表的崩落采矿法中,拉槽至关重要,而目前无底柱采矿大多采用垂直天井与平巷并配以中深孔联合拉槽的方法,但该方法在对矿体上盘回采过程中损失贫化较大。

Objective The aim of this study was to compare the effectiveness of dynamical system cutterbar via nasal endoscope for adenoidectomy by mouth and rout curettage of adenoids.

目的比较鼻内镜下经口动力系统器行腺样体除术与常规腺样体刮除术的疗效。

It includes the division of dissolving area, the redetermination of its length and width,downhill layout of dissolving area a nd improvement of drilling tunnel and cutting grooves.

包括溶区的划分,溶区长、宽的重新确定;溶区间的下山布置,以及打眼巷、槽的改进等。

The edge must be machined down to 0.02 millimetres.

这边缘必须切割到0.02毫米的精确度。

This machine is fully automatism number controlled, its operation is handy, andits cutting is exact.

本机全自动数字控制，操作简便，切割精确。

Beancurd is sectile.

豆腐是可以切割的。

Objective To explore the effect of One-stage Repair of Incised Wound in Palmaris with microsurgery Technique.

目的探讨腕部切割伤Ⅰ期显微外科修复手术治疗的疗效。

The potential applications of the clypeus in bionic cutting resistance reduction were analyzed.

最后分析了臭蜣螂唇基潜的仿生应用，其天然优化的形状和切割角的自动调节可指导地面机械的仿生设计。

Principle of original horizontality, principle of superposition, principle of lateral continuity, principle of crosscutting relationship and unconformity.

原始地层水平律、叠置律水平连续律、切割律、不整合。

PROF.: The word “atom” is derived from the Greek word meaning “uncuttable.” 2

“原子”一词是来自希腊文,意思是”不能切割”.

Preflushing machine,the related auxiliary device of fretsaw,is applied to the preflushing for stripping after cutting silicon chip.

本设备是套辅助设备，用于硅片切割后脱胶预冲洗用。

The machine has double revolving table cutterbar, pneumatic compact, high precision of process and saw cutting at the same time.

转台切割机，气动压紧，头同时切割，加工精度高。

Those dedicated to the path of mapmaking know that there is no other purpose for their life expression upon Earth.

那些奉献地图切割道路上的人知道地球上的生命表达没有其它目的。

The application and maintenance of single phase input converter DV700T1500 produced by Panasonic in improving multitool dicing machine are described.

主要介绍松下公司生产的DV700T1500型单相输入的变频器多刀切割机改进中的应用及其维护保养措施。

Studies were made on the vegetative propagation coefficient and cormel's biological characters using eighth-excision in different development phase of Lycoris radiate.

摘要红花石蒜不同生长发育期进行八分法切割繁殖，研究无性繁殖系数和子球生物学性状差异性。

"The simplest stonework is rubBle, roughly Broken stones Bound in mortar. Ashlar work consists of regularly cut Blocks with squared edges."

最简单的石料加工品是粗石,研磨机中粗略地破碎的石头。方石加工品是由整齐地切割出具方形边缘之石块所组成。

Conclusion:Uncovery method under nasal endoscope was an effective simple operation to treat Cysts in Nasal Vestibule,and with the advantages such a...

鼻内镜下辅以鼻窦电动切割器行鼻前庭囊肿揭盖术,具有手术精确、时间短、创伤小、愈合快等微创手术优点,值得推广。

In this paper, we used 20 high-quality carburet structure steed, recommended the experiment on abrasive water jet metal-cutting and others affecting metallurgic structure.

本文以20＃优质碳素结构钢为试件，介绍了磨料水射流切割与其它方法切割对金相组织影响的试验。

When cutting most pleochroic gemstones (Iolite, Tanzanite, Kunzite etc.), lapidaries typically try to minimize the pleochroism and maximize the single most prominent color.

切割大多数的多向色性类宝石时（如堇青石、坦桑宝石、紫锂辉石等），通常宝石匠会尽量缩小多向色性并最大化地将某一主色凸显出来。

Packng tools, Packing cutter, Gasket cutter, SWG winding machine, bending machine, Groover, Angling machine, Double jacketed machine, Gasket cutting machine, Puncher, Calender, Braider and so on.

密封机械 ：盘根工具，盘根切割工具，垫片切割工具，缠绕机，盘环机，铣槽机，倒角机，包覆机，翦机，点焊机，冲齿机，辊压机，盘根编织机。

Since the method causes serious depletion of ore during mining of upper plate,the inclined cutting raise heading together with inclined medium or deep hole kerve is suggested.

以无底柱为代表的崩落采矿法中,切割拉槽至关重要,而目前无底柱采矿大多采用垂直切割天井与切割平巷并以中深孔联合拉槽的切割方法,但该方法对矿体上盘回采过程中损失贫化较大。

Objective The aim of this study was to compare the effectiveness of dynamical system cutterbar via nasal endoscope for adenoidectomy by mouth and rout curettage of adenoids.

目的比较鼻内镜下经口动力系统切割器行腺样体切除术与常规腺样体刮除术的疗效。

It includes the division of dissolving area, the redetermination of its length and width,downhill layout of dissolving area a nd improvement of drilling tunnel and cutting grooves.

包括溶区的划分,溶区长、宽的重新确定;溶区间的下山布置,以及打眼巷、切割槽的改进等。