The characteristic and influencing factors of tools wear were analyzed through turning fluorophlogopite machinable ceramics.

对氟金云母可加工陶瓷进加工试验,分析切中的刀具磨损特性,讨论影响刀具磨损率的因素。

The feasibility of thermal state continuative feeding coking process with coal liquefaction residue was discussed through experiment study.

通过试验分析,探索煤直接液化残渣采用热态、批量连续进料炼焦工艺的可性。

The influence of afterburning chamber length on secondary combustion efficiency and flow field were analyzed based on direct-connected ground simulation test.

结合直连式地面模拟试验,分析补燃室长对掺混流场和二次燃烧效率的影响。

The formation mechanism of orange valvule-like pinhole in rolled aluminium foil was investigated by using optical microscopy,scanning electron microscopy,and energy dispersion X-ray spectrum.

利用光学显微镜、扫描电镜、能谱分析等试验手段对铝箔中"桔瓣"形针孔形成的原因进分析。

The compositional recipe of carburizer and the technical parameter of heat treatment are determined by means of the microstructrue analysis,peeling analysis.TEM observation and sawability test.

通过显微组织分析、剥层分析、透射电镜分析和锯切性能试验后,确定配方和工艺参数。

On the base of Elastic Mechanics, theory of offset error is founded through analyzing the main origin of error and its amenability in the course of experiment.

通过分析模拟试验过程中的主要误差来源及其可控性，以弹性力学为基础，建立相似材料模拟试验的误差补偿理论。

Based on the model test data and static analysis, two practical methods of determining the static character of the multichain mooring buoy system are given in this paper.

本文基于受力分析和模型试验的结果，给出确定多链锚泊系统静力特性的二种实用方法。

The characteristic and influencing factors of tools wear were analyzed through turning fluorophlogopite machinable ceramics.

对氟金云母可加工陶瓷进行车削加工,分析了切削中的刀具磨损特性,讨论了影响刀具磨损率的因素。

The feasibility of thermal state continuative feeding coking process with coal liquefaction residue was discussed through experiment study.

通分析,探索了煤直接液化残渣采用热态、批量连续进料炼焦工艺的可行性。

The influence of afterburning chamber length on secondary combustion efficiency and flow field were analyzed based on direct-connected ground simulation test.

结合直连式地面模拟,分析了补燃室长对掺混流场和二次燃烧效率的影响。

The formation mechanism of orange valvule-like pinhole in rolled aluminium foil was investigated by using optical microscopy,scanning electron microscopy,and energy dispersion X-ray spectrum.

利用光学显微镜、扫描电镜、能谱分析等手段对铝箔中"桔瓣"形针孔形成的原因进行了分析。

The compositional recipe of carburizer and the technical parameter of heat treatment are determined by means of the microstructrue analysis,peeling analysis.TEM observation and sawability test.

通显微组织分析、剥层分析、透射电镜分析和锯切性能后,确定了渗剂配方和工艺参数。

On the base of Elastic Mechanics, theory of offset error is founded through analyzing the main origin of error and its amenability in the course of experiment.

通分析模拟程中的主要误差来源及其可控性，以弹性力学为基础，建立了相似材料模拟的误差补偿理论。

Based on the model test data and static analysis, two practical methods of determining the static character of the multichain mooring buoy system are given in this paper.

本文基于受力分析和模型的结果，给出了确定多链锚泊系统静力特性的二种实用方法。

The characteristic and influencing factors of tools wear were analyzed through turning fluorophlogopite machinable ceramics.

对氟金云母陶瓷进行车削试验,分析了切削中的刀具磨损特性,讨论了影响刀具磨损率的因素。

The feasibility of thermal state continuative feeding coking process with coal liquefaction residue was discussed through experiment study.

通过试验分析,探索了煤直接液化残渣采用热态、批量连续进料炼焦的行性。

The influence of afterburning chamber length on secondary combustion efficiency and flow field were analyzed based on direct-connected ground simulation test.

结合直连式地面模拟试验,分析了补燃室长对掺混流场和二次燃烧效率的影响。

The formation mechanism of orange valvule-like pinhole in rolled aluminium foil was investigated by using optical microscopy,scanning electron microscopy,and energy dispersion X-ray spectrum.

利用光学显微镜、扫描电镜、能谱分析等试验手段对铝箔中"桔瓣"形针孔形成的原因进行了分析。

The compositional recipe of carburizer and the technical parameter of heat treatment are determined by means of the microstructrue analysis,peeling analysis.TEM observation and sawability test.

通过显微组织分析、剥层分析、透射电镜分析和锯切性能试验后,确定了渗剂配方和数。

On the base of Elastic Mechanics, theory of offset error is founded through analyzing the main origin of error and its amenability in the course of experiment.

通过分析模拟试验过程中的主要误差来源及其控性，以弹性力学为基础，建立了相似材料模拟试验的误差补偿理论。

Based on the model test data and static analysis, two practical methods of determining the static character of the multichain mooring buoy system are given in this paper.

本文基于受力分析和模型试验的结果，给出了确定多链锚泊系统静力特性的二种实用方法。

The characteristic and influencing factors of tools wear were analyzed through turning fluorophlogopite machinable ceramics.

对氟金云母可加工陶瓷进行车削加工验,分了切削中的刀具磨损特性,讨论了影响刀具磨损率的因素。

The feasibility of thermal state continuative feeding coking process with coal liquefaction residue was discussed through experiment study.

通过验分,探索了煤直接液化残渣采用热态、续进料炼焦工艺的可行性。

The influence of afterburning chamber length on secondary combustion efficiency and flow field were analyzed based on direct-connected ground simulation test.

结合直式地面模拟验,分了补燃室长对掺混流场和二次燃烧效率的影响。

The formation mechanism of orange valvule-like pinhole in rolled aluminium foil was investigated by using optical microscopy,scanning electron microscopy,and energy dispersion X-ray spectrum.

利用光学显微镜、扫描电镜、能谱分验手段对铝箔中"桔瓣"形针孔形成的原因进行了分。

The compositional recipe of carburizer and the technical parameter of heat treatment are determined by means of the microstructrue analysis,peeling analysis.TEM observation and sawability test.

通过显微组织分、剥层分、透射电镜分和锯切性能验后,确定了渗剂配方和工艺参数。

On the base of Elastic Mechanics, theory of offset error is founded through analyzing the main origin of error and its amenability in the course of experiment.

通过分模拟验过程中的主要误差来源及其可控性，以弹性力学为基础，建立了相似材料模拟验的误差补偿理论。

Based on the model test data and static analysis, two practical methods of determining the static character of the multichain mooring buoy system are given in this paper.

本文基于受力分和模型验的结果，给出了确定多链锚泊系统静力特性的二种实用方法。

The characteristic and influencing factors of tools wear were analyzed through turning fluorophlogopite machinable ceramics.

对氟金云母可加工陶瓷进行车削加工试,了切削中的刀具磨损特性,讨论了影响刀具磨损率的因素。

The feasibility of thermal state continuative feeding coking process with coal liquefaction residue was discussed through experiment study.

通过试,探索了煤直接液化残渣采用热态、批量连续进料炼焦工艺的可行性。

The influence of afterburning chamber length on secondary combustion efficiency and flow field were analyzed based on direct-connected ground simulation test.

结合直连式地面模拟试,了补燃室长对掺混流场燃烧效率的影响。

The formation mechanism of orange valvule-like pinhole in rolled aluminium foil was investigated by using optical microscopy,scanning electron microscopy,and energy dispersion X-ray spectrum.

利用光学显微镜、扫描电镜、能谱等试手段对铝箔中"桔瓣"形针孔形成的原因进行了。

The compositional recipe of carburizer and the technical parameter of heat treatment are determined by means of the microstructrue analysis,peeling analysis.TEM observation and sawability test.

通过显微组织、剥层、透射电镜锯切性能试后,确定了渗剂配方工艺参数。

On the base of Elastic Mechanics, theory of offset error is founded through analyzing the main origin of error and its amenability in the course of experiment.

通过模拟试过程中的主要误差来源及其可控性，以弹性力学为基础，建立了相似材料模拟试的误差补偿理论。

Based on the model test data and static analysis, two practical methods of determining the static character of the multichain mooring buoy system are given in this paper.

本文基于受力模型试的结果，给出了确定多链锚泊系统静力特性的种实用方法。

The characteristic and influencing factors of tools wear were analyzed through turning fluorophlogopite machinable ceramics.

对氟金云母可加工陶瓷进行车削加工试验,分析了切削的刀具磨损特性,讨论了影响刀具磨损率的因素。

The feasibility of thermal state continuative feeding coking process with coal liquefaction residue was discussed through experiment study.

通过试验分析,探索了煤直残渣采用热态、批量连续进料炼焦工艺的可行性。

The influence of afterburning chamber length on secondary combustion efficiency and flow field were analyzed based on direct-connected ground simulation test.

结合直连式地面模拟试验,分析了补燃室长对掺混流场和二次燃烧效率的影响。

The formation mechanism of orange valvule-like pinhole in rolled aluminium foil was investigated by using optical microscopy,scanning electron microscopy,and energy dispersion X-ray spectrum.

利用光学显微镜、扫描电镜、能谱分析等试验手段对铝箔""形针孔形成的原因进行了分析。

The compositional recipe of carburizer and the technical parameter of heat treatment are determined by means of the microstructrue analysis,peeling analysis.TEM observation and sawability test.

通过显微组织分析、剥层分析、透射电镜分析和锯切性能试验后,确定了渗剂配方和工艺参数。

On the base of Elastic Mechanics, theory of offset error is founded through analyzing the main origin of error and its amenability in the course of experiment.

通过分析模拟试验过程的主要误差来源及其可控性，以弹性力学为基础，建立了相似材料模拟试验的误差补偿理论。

Based on the model test data and static analysis, two practical methods of determining the static character of the multichain mooring buoy system are given in this paper.

本文基于受力分析和模型试验的结果，给出了确定多链锚泊系统静力特性的二种实用方法。

The characteristic and influencing factors of tools wear were analyzed through turning fluorophlogopite machinable ceramics.

对氟金云母可加工陶瓷进行车削加工试验,了切削中刀具磨损特性,讨论了影响刀具磨损率。

The feasibility of thermal state continuative feeding coking process with coal liquefaction residue was discussed through experiment study.

过试验,探索了煤直接液化残渣采用热态、批量连续进料炼焦工艺可行性。

The influence of afterburning chamber length on secondary combustion efficiency and flow field were analyzed based on direct-connected ground simulation test.

结合直连式地面模拟试验,了补燃室长对掺混流场和二次燃烧效率影响。

The formation mechanism of orange valvule-like pinhole in rolled aluminium foil was investigated by using optical microscopy,scanning electron microscopy,and energy dispersion X-ray spectrum.

利用光学显微镜、扫描电镜、能谱等试验手段对铝箔中"桔瓣"形针孔形成原进行了。

The compositional recipe of carburizer and the technical parameter of heat treatment are determined by means of the microstructrue analysis,peeling analysis.TEM observation and sawability test.

过显微组织、剥层、透射电镜和锯切性能试验后,确定了渗剂配方和工艺参数。

On the base of Elastic Mechanics, theory of offset error is founded through analyzing the main origin of error and its amenability in the course of experiment.

过模拟试验过程中主要误差来源及其可控性，以弹性力学为基础，建立了相似材料模拟试验误差补偿理论。

Based on the model test data and static analysis, two practical methods of determining the static character of the multichain mooring buoy system are given in this paper.

本文基于受力和模型试验结果，给出了确定多链锚泊系统静力特性二种实用方法。

The characteristic and influencing factors of tools wear were analyzed through turning fluorophlogopite machinable ceramics.

对氟金云母可加工陶瓷进行车削加工试验,分析了切削刀具磨损特性,讨论了影响刀具磨损率因素。

The feasibility of thermal state continuative feeding coking process with coal liquefaction residue was discussed through experiment study.

通过试验分析,探索了煤直接液化残渣采用热态、批量连续进料炼焦工艺可行性。

The influence of afterburning chamber length on secondary combustion efficiency and flow field were analyzed based on direct-connected ground simulation test.

结合直连式地面模拟试验,分析了补燃室长对掺混流场和二次燃烧效率影响。

The formation mechanism of orange valvule-like pinhole in rolled aluminium foil was investigated by using optical microscopy,scanning electron microscopy,and energy dispersion X-ray spectrum.

利用光学显微镜、扫描电镜、能谱分析等试验手段对铝箔"桔瓣"形针孔形成原因进行了分析。

The compositional recipe of carburizer and the technical parameter of heat treatment are determined by means of the microstructrue analysis,peeling analysis.TEM observation and sawability test.

通过显微组织分析、剥层分析、透射电镜分析和锯切性能试验后,确定了渗剂配方和工艺参数。

On the base of Elastic Mechanics, theory of offset error is founded through analyzing the main origin of error and its amenability in the course of experiment.

通过分析模拟试验过程要误差来源及其可控性，以弹性力学为基础，建立了相似材料模拟试验误差补偿理论。

Based on the model test data and static analysis, two practical methods of determining the static character of the multichain mooring buoy system are given in this paper.

本文基于受力分析和模型试验结果，给出了确定多链锚泊系统静力特性二种实用方法。

The characteristic and influencing factors of tools wear were analyzed through turning fluorophlogopite machinable ceramics.

对氟可加工陶瓷进行车削加工试验,分析了切削中的刀具磨损特性,讨论了影响刀具磨损率的因素。

The feasibility of thermal state continuative feeding coking process with coal liquefaction residue was discussed through experiment study.

试验分析,探索了煤直接液化残渣采用热态、批量连续进料炼焦工艺的可行性。

The influence of afterburning chamber length on secondary combustion efficiency and flow field were analyzed based on direct-connected ground simulation test.

结合直连式地面模拟试验,分析了补燃室长对掺混流场和二次燃烧效率的影响。

The formation mechanism of orange valvule-like pinhole in rolled aluminium foil was investigated by using optical microscopy,scanning electron microscopy,and energy dispersion X-ray spectrum.

利用光学显微镜、扫描电镜、能谱分析等试验手段对铝箔中"桔瓣"形针孔形成的原因进行了分析。

The compositional recipe of carburizer and the technical parameter of heat treatment are determined by means of the microstructrue analysis,peeling analysis.TEM observation and sawability test.

显微组织分析、剥层分析、透射电镜分析和锯切性能试验后,确定了渗剂配方和工艺参。

On the base of Elastic Mechanics, theory of offset error is founded through analyzing the main origin of error and its amenability in the course of experiment.

分析模拟试验程中的主要误差来源及其可控性，以弹性力学为基础，建立了相似材料模拟试验的误差补偿理论。

Based on the model test data and static analysis, two practical methods of determining the static character of the multichain mooring buoy system are given in this paper.

本文基于受力分析和模型试验的结果，给出了确定多链锚泊系统静力特性的二种实用方法。

The characteristic and influencing factors of tools wear were analyzed through turning fluorophlogopite machinable ceramics.

对氟金云母可加工陶瓷进行车削加工试验,分析了切削中刀具磨特性,讨论了影响刀具磨因素。

The feasibility of thermal state continuative feeding coking process with coal liquefaction residue was discussed through experiment study.

试验分析,探索了煤直接液化残渣采用热态、批量连续进料炼焦工艺可行性。

The influence of afterburning chamber length on secondary combustion efficiency and flow field were analyzed based on direct-connected ground simulation test.

结合直连式地面模拟试验,分析了补燃室长对掺混流场和二次燃烧效影响。

The formation mechanism of orange valvule-like pinhole in rolled aluminium foil was investigated by using optical microscopy,scanning electron microscopy,and energy dispersion X-ray spectrum.

利用光学微镜、扫描电镜、能谱分析等试验手段对铝箔中"桔瓣"形针孔形成原因进行了分析。

The compositional recipe of carburizer and the technical parameter of heat treatment are determined by means of the microstructrue analysis,peeling analysis.TEM observation and sawability test.

微组织分析、剥层分析、透射电镜分析和锯切性能试验后,确定了渗剂配方和工艺参数。

On the base of Elastic Mechanics, theory of offset error is founded through analyzing the main origin of error and its amenability in the course of experiment.

分析模拟试验程中主要误差来源及其可控性，以弹性力学为基础，建立了相似材料模拟试验误差补偿理论。

Based on the model test data and static analysis, two practical methods of determining the static character of the multichain mooring buoy system are given in this paper.

本文基于受力分析和模型试验结果，给出了确定多链锚泊系统静力特性二种实用方法。